[PATCH 12/38] Documentation: dt: iio: Add binding for L3G4200D

[Jonathan Cameron]

Add devicetree list cc
On 09/10/13 13:49, Lee Jones wrote:
> L3G4200D is a Gyroscope Sensor
> 
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
> ---
>  .../devicetree/bindings/iio/gyro/l3g4200d.txt       | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt b/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt
> new file mode 100644
> index 0000000..29baf9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt
> @@ -0,0 +1,21 @@
> +* STMicroelectronics Gyroscope Sensor
> +
> +Required properties:
> +  - compatible: Should be "st,l3g4200d_gyro"
> +  - reg: The I2C address of the sensor
> +
> +Optional properties:
> +  - vdd-supply: Phandle to the Vdd supply regulator
> +  - vddio-supply: Phandle to the Vdd-IO supply regulator
> +
> +Example:
> +
> +i2c at 80128000 {
> +	l3g4200d_gyro at 68 {
> +		compatible = "st,l3g4200d_gyro";
> +		reg = <0x68>;
> +
> +		vdd-supply = <&ab8500_ldo_aux1_reg>;
> +		vddio-supply = <&db8500_vsmps2_reg>;
> +	};
> +};
>