[PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd

[Nishanth Menon]

On 09/20/2013 12:38 PM, Balaji T K wrote:
> correct mux mode for mmc1_cmd to detect eMMC on bone-black
> 
> Signed-off-by: Balaji T K <balajitk at ti.com>
> ---
>  arch/arm/boot/dts/am335x-bone-common.dtsi |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index 56361ce..90ab56c 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -117,7 +117,7 @@
>  		emmc_pins: pinmux_emmc_pins {
>  			pinctrl-single,pins = <
>  				0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
> -				0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */
> +				0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
>  				0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
>  				0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
>  				0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
> 
is'nt this a common change? why is it "black only"? if it is so, then
the pinmux should probably be spun off outside bone-common.dtsi into
boneblack.dtsi perhaps?

-- 
Regards,
Nishanth Menon