October 2010 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Oct 1 00:06:01 EDT 2010
Ending: Sun Oct 31 18:30:36 EDT 2010
Messages: 3014

• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Sven Neumann
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Eric Miao
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Maciej Rutecki
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Daniel Mack
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Rafael J. Wysocki
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Sven Neumann
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Rafael J. Wysocki
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Sven Neumann
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Rafael J. Wysocki
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Ohad Ben-Cohen
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Sven Neumann
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Sven Neumann
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Sven Neumann
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Ohad Ben-Cohen
• 2.6.35.6 fails to suspend (pxa2xx-mci.0)   Sven Neumann
• 2.6.36-rc7-next-20101007 failed to compile (arch/arm/kernel/setup.c)   Uwe Kleine-König
• 2.6.36-rc7-next-20101007 failed to compile (arch/arm/kernel/setup.c)   Alex Sverdlin
• [017/103] oprofile, ARM: Release resources on failure   Greg KH
• [[PATCHv4]] cpufreq for freescale mx51   yong.shen at linaro.org
• [[PATCHv4]] cpufreq for freescale mx51   Amit Kucheria
• [alsa-devel] [PATCH 0/10] Add S/PDIF common driver for Samsung SoCs   Jassi Brar
• [alsa-devel] [PATCH 00/25] ASoC: Overhaul Samsung drivers   Vasily khoruzhick
• [alsa-devel] [PATCH 00/25] ASoC: Overhaul Samsung drivers   Mark Brown
• [alsa-devel] [PATCH 00/25] ASoC: Overhaul Samsung drivers   Jassi Brar
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Mark Brown
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Mark Brown
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Mark Brown
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Mark Brown
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Jassi Brar
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Jassi Brar
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Jassi Brar
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Jassi Brar
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Seungwhan Youn
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Kukjin Kim
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Seungwhan Youn
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Seungwhan Youn
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Kukjin Kim
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Jassi Brar
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Jassi Brar
• [alsa-devel] [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Seungwhan Youn
• [alsa-devel] [PATCH 3/10] ARM: S5PC100: Add SCLK_SPDIF clock   Jassi Brar
• [alsa-devel] [PATCH 4/4] ASoC: ep93xx: add Simplemachines Sim.One AC97 audio support   Mika Westerberg
• [alsa-devel] [PATCH 4/4] ASoC: ep93xx: add Simplemachines Sim.One AC97 audio support   Jassi Brar
• [alsa-devel] [PATCH 4/4] ASoC: ep93xx: add Simplemachines Sim.One AC97 audio support   Jassi Brar
• [alsa-devel] [PATCH 5/10] ARM: S5PV210: Add SCLK_SPDIF clock   Jassi Brar
• [alsa-devel] [PATCH v2 0/6] Add S/PDIF common driver for Samsung SoCs   Jassi Brar
• [alsa-devel] [PATCH v2 5/6] ASoC: SAMSUNG: Add S/PDIF CPU driver   Jassi Brar
• [alsa-devel] [PATCH v3 0/3] ASoC AC97 audio support for ep93xx   Liam Girdwood
• [BUG] 2.6.36-rc6 on kirkwood breaks gcc precompiled-headers   Mikael Pettersson
• [BUG] 2.6.36-rc6 on kirkwood breaks gcc precompiled-headers   Mikael Pettersson
• [GIT PULL v2] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Tony Lindgren
• [GIT PULL v2] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Paul Walmsley
• [GIT PULL v2] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Paul Walmsley
• [GIT PULL] genesis updates for 2.6.37-rc1   Paul Mundt
• [GIT PULL] genesis updates for 2.6.37-rc1   Russell King - ARM Linux
• [GIT PULL] genesis updates for 2.6.37-rc1   Paul Mundt
• [GIT PULL] i.MX updates for 2.6.37   Sascha Hauer
• [GIT PULL] Introduce patching of phys_to_virt and vice versa   Eric Miao
• [GIT PULL] MSM changes for v2.6.37   Daniel Walker
• [GIT PULL] MSM changes for v2.6.37   Daniel Walker
• [GIT PULL] msm fixes and msm video   Daniel Walker
• [GIT PULL] omap updates for 2.6.37   Tony Lindgren
• [GIT PULL] omap2 sparse fixes   Tony Lindgren
• [GIT PULL] OMAP: couple more PM fixes for 2.6.37   Kevin Hilman
• [GIT PULL] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Paul Walmsley
• [GIT PULL] one omap fix for 2.6.36   Tony Lindgren
• [GIT PULL] pxa patches for next   Eric Miao
• [GIT PULL] Samsung fixes for 2.6.36   Kukjin Kim
• [GIT PULL] Samsung S5P for 2.6.37 merge window   Kukjin Kim
• [GIT PULL] Samsung S5P for 2.6.37 merge window   Kukjin Kim
• [GIT PULL] Samsung S5P for 2.6.37 merge window   Russell King - ARM Linux
• [GIT PULL] Samsung S5P for 2.6.37 merge window   Kukjin Kim
• [GIT PULL] Samsung S5P for 2.6.37 merge window   Darius Augulis
• [GIT PULL] tegra updates for 2.6.37   Colin Cross
• [GIT] dmaengine/async_tx update for 2.6.37   Dan Williams
• [GITT PULL] AT91 for 2.6.37 merge window   Nicolas Ferre
• [GITT PULL] AT91: 2.6.37 merge window   Nicolas Ferre
• [GITT PULL] AT91: second pull for 2.6.37 merge window   Nicolas Ferre
• [GITT PULL] AT91: second pull for 2.6.37 merge window   Russell King - ARM Linux
• [GITT PULL] AT91: second pull for 2.6.37 merge window   Nicolas Ferre
• [lm-sensors] [PATCH 4/5] hwmon: DNS323 rev C1 fan support   Guenter Roeck
• [lm-sensors] [PATCH 4/5] hwmon: DNS323 rev C1 fan support   Simon Guinot
• [lm-sensors] [PATCH v2] hwmon: add generic GPIO fan driver   Simon Guinot
• [lm-sensors] [PATCH v2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [lm-sensors] [PATCH v2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH -v2] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH -v3] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Uwe Kleine-König
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Catalin Marinas
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH .36-rc8] arm: mm: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH 0/10] Add S/PDIF common driver for Samsung SoCs   Seungwhan Youn
• [PATCH 0/2 v2] S3C64XX: Fix 48M clock enable   Paulius Zaleckas
• [PATCH 0/2 v2] S3C64XX: Fix 48M clock enable   Marek Szyprowski
• [PATCH 0/2 v2] S3C64XX: Fix 48M clock enable   Paulius Zaleckas
• [PATCH 0/2 v2] S3C64XX: Fix 48M clock enable   Marek Szyprowski
• [PATCH 0/2] [ARM] Dove: add support for MPP configuration   Mike Rapoport
• [PATCH 0/2] Add GPIO WP and HW bus-width caps when support i.MX51 BBG board   Richard Zhu
• [patch 0/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [PATCH 0/2] ARM: S3C64XX: SmartQ: add suspend support   Maurus Cuelenaere
• [PATCH 0/2] ARM: S5PV310: Add support ethernet for SMDKV310 and SMDKC210   Sangbeom Kim
• [PATCH 0/2] ARM: SAMSUNG: Add Support Power Domain Control   Kukjin Kim
• [PATCH 0/2] ARM: SAMSUNG: Add Support Power Domain Control   Ben Dooks
• [PATCH 0/2] babbage: support mmc device   Shawn Guo
• [PATCH 0/2] mx25_3ds & mx35_3ds: add mmc support   Shawn Guo
• [PATCH 0/2] mx25_3ds & mx35_3ds: add mmc support   Uwe Kleine-König
• [PATCH 0/2] OMAP: DSS2: Add new display panel   Enric Balletbo i Serra
• [PATCH 0/2] S3C64XX: Fix 48M clock enable   Paulius Zaleckas
• [PATCH 0/2] sdhci-s3c: Add support S5PV310/S5PC210 HSMMC   Kukjin Kim
• [PATCH 0/2] Trivial series   Felipe Balbi
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Ohad Ben-Cohen
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Peter Zijlstra
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Russell King - ARM Linux
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Peter Zijlstra
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Ohad Ben-Cohen
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Peter Zijlstra
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Ohad Ben-Cohen
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Catalin Marinas
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Peter Zijlstra
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Ohad Ben-Cohen
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Peter Zijlstra
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Catalin Marinas
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Peter Zijlstra
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Daniel Walker
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Ohad Ben-Cohen
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Russell King - ARM Linux
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Ohad Ben-Cohen
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Daniel Walker
• [PATCH 0/3] Add OMAP hardware spinlock misc driver   Bryan Huntsman
• [PATCH 0/3] add resources for SD/MMC on i.MX3   Wolfram Sang
• [PATCH 0/3] Allow late mdesc detection, v4   Nicolas Pitre
• [PATCH 0/3] Allow late mdesc detection, v4   Russell King - ARM Linux
• [PATCH 0/3] Allow late mdesc detection, v4   Nicolas Pitre
• [PATCH 0/3] Allow late mdesc detection, v4   Tony Lindgren
• [PATCH 0/3] ARM: S5PV310: Add EINT support   Jongsun Han
• [PATCH 0/3] mxc: mx51: Add support for efikamx nettop   Amit Kucheria
• [PATCH 0/3] omap4: pandaboard: machine cleanups   David Anders
• [PATCH 0/3] omap4: pandaboard: machine cleanups   Tony Lindgren
• [PATCH 0/3] sdma/dma resources   Uwe Kleine-König
• [PATCH 0/3] staging: tidspbridge: fix ioremap() usage   Felipe Contreras
• [PATCH 0/4] ARM: S3C64XX: SmartQ suspend support   Maurus Cuelenaere
• [PATCH 0/4] ARM: S5PV310: Add support FIMD   Sangbeom Kim
• [PATCH 0/4] ARM: S5PV310: Add support S5PV310/S5PC210 CPUFREQ   Kukjin Kim
• [PATCH 0/4] ARM: SAMSUNG: Change VMALLOC_END and Samsung SoCs' VA space   Kukjin Kim
• [PATCH 0/4] ARM: smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   vkuzmichev at mvista.com
• [PATCH 0/4] ASoC AC97 audio support for ep93xx   Mika Westerberg
• [PATCH 0/4] ASoC AC97 audio support for ep93xx   Mika Westerberg
• [PATCH 0/4] caif-u5500: CAIF shared memory/mailbox driver   Sjur Braendeland
• [PATCH 0/4] omap4: pandaboard: machine cleanups   David Anders
• [PATCH 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver   Ben Dooks
• [PATCH 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver   Thomas Abraham
• [PATCH 0/4] USB: gadget: Add Samsung S3C24xx USB HS controller driver   Sangbeom Kim
• [PATCH 0/5] arm: remove duplicated includes   Nicolas Kaiser
• [PATCH 0/5] ARM: S5P: Update DMA operation clock   Kukjin Kim
• [PATCH 0/6] - Acer n35 fixes and features   Jiří Pinkava
• [PATCH 0/6] - Acer n35 fixes and features   Ben Dooks
• [PATCH 0/6] - Acer n35 fixes and features   Ben Dooks
• [PATCH 0/6] Add PCI support for ARM RealView boards   Colin Tuckley
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Chris Ball
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Chris Ball
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Arnaud Patard (Rtp)
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Eric Bénard
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Arnaud Patard (Rtp)
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Zhu Richard-R65037
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Eric Bénard
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Zhu Richard-R65037
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Arnaud Patard (Rtp)
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Zhu Richard-R65037
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Zhu Richard-R65037
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Eric Bénard
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Zhu Richard-R65037
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH 0/6] SD/MMC driver for MX25/35/51   Eric Bénard
• [PATCH 0/7] arm/versatile PCI support, second try   Arnd Bergmann
• [PATCH 0/7] arm/versatile PCI support, second try   Linus Walleij
• [PATCH 0/7] arm/versatile PCI support, second try   Arnd Bergmann
• [PATCH 0/7] arm/versatile PCI support, second try   Colin Tuckley
• [PATCH 0/7] arm/versatile PCI support, second try   Linus Walleij
• [PATCH 0/7] arm/versatile PCI support, second try   Arnd Bergmann
• [PATCH 0/7] arm/versatile PCI support, second try   Peter Maydell
• [PATCH 0/7] ARM: S5PC210: I2C devices support and Universal board updates   Kyungmin Park
• [PATCH 0/7] ARM: S5PC210: I2C devices support and Universal board updates   Kukjin Kim
• [PATCH 0/7] ARM: S5PC210: I2C devices support and Universal board updates   Kyungmin Park
• [PATCH 0/7] ARM: S5PC210: I2C devices support and Universal board updates   Marek Szyprowski
• [PATCH 0/7] ARM: S5PC210: I2C devices support and Universal board updates   Kukjin Kim
• [PATCH 0/7] omap:mailbox-enhancements and fixes   Hari Kanigeri
• [PATCH 0/8] omap2+ patches for v2.6.37 merge window   Tony Lindgren
• [PATCH 0/8] staging: tidspbridge - misc fixes   Fernando Guzman Lugo
• [PATCH 0/8] staging: tidspbridge - misc fixes   Greg KH
• [PATCH 0/8] staging: tidspbridge - misc fixes   Felipe Contreras
• [PATCH 0/8] staging: tidspbridge - misc fixes   Omar Ramirez Luna
• [PATCH 0/8] staging: tidspbridge - misc fixes   Guzman Lugo, Fernando
• [patch 0/9] efikamx support improvements   Arnaud Patard (Rtp)
• [PATCH 0/9] Typo fixes of faild to failed   Joe Perches
• [PATCH 0/9] Typo fixes of faild to failed   Mike Frysinger
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Magnus Damm
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Eric Miao
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Grant Likely
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Eric Miao
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Eric Miao
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Grant Likely
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Eric Miao
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Magnus Damm
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Eric Miao
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Magnus Damm
• [PATCH 00/08] ARM: Dynamic IRQ demux support   Grant Likely
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Tony Lindgren
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Tony Lindgren
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Liam Girdwood
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Mark Brown
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Jarkko Nikula
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Peter Ujfalusi
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Paul Walmsley
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37   Paul Walmsley
• [patch 00/12] arm: raw_spinlock annotations   Uwe Kleine-König
• [patch 00/12] arm: raw_spinlock annotations   Arnd Bergmann
• [patch 00/12] arm: raw_spinlock annotations   Russell King - ARM Linux
• [patch 00/12] arm: raw_spinlock annotations   Thomas Gleixner
• [patch 00/12] arm: raw_spinlock annotations   Arnd Bergmann
• [patch 00/12] arm: raw_spinlock annotations   Thomas Gleixner
• [PATCH 00/20 v2] Support for Qualcomm msm8660 target   Jeff Ohlstein
• [PATCH 00/25] ASoC: Overhaul Samsung drivers   Kukjin Kim
• [PATCH 00/25] ASoC: Overhaul Samsung drivers   Maurus Cuelenaere
• [PATCH 00/27] ARM: SAMSUNG: GPIO updates   Kukjin Kim
• [PATCH 00/39] Cleanup WARN #defines   Joe Perches
• [PATCH 00/47] davinci queue for 2.6.37   Kevin Hilman
• [PATCH 01/08] ARM: Move entry-header.S to asm/   Magnus Damm
• [PATCH 01/10] ARM: no need for nommu to jump through the hoops that mmu does   Greg Ungerer
• [PATCH 01/10] ARM: no need for nommu to jump through the hoops that mmu does   Russell King - ARM Linux
• [PATCH 01/10] OMAP2+: Kconfig: disallow builds for boards that don't use the currently-selected SoC   Varadarajan, Charulatha
• [PATCH 01/10] OMAP2+: Kconfig: disallow builds for boards that don't use the currently-selected SoC   Paul Walmsley
• [PATCH 01/10] OMAP2+: Kconfig: disallow builds for boards that don't use the currently-selected SoC   Paul Walmsley
• [PATCH 01/12] ARM: Convert dma_spin_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 01/13] ARM: pxa: Introduce pxa[23]xx_map_io   Marek Vasut
• [PATCH 01/13] ARM: pxa: Introduce pxa[23]xx_map_io   Igor Grinberg
• [PATCH 01/13] ARM: pxa: Introduce pxa[23]xx_map_io   Marek Vasut
• [PATCH 01/14 v2] ARM: pxa: Introduce pxa[23]xx_map_io   Marek Vasut
• [PATCH 01/14 v2] ARM: pxa: Introduce pxa[23]xx_map_io   Haojian Zhuang
• [PATCH 01/14 v2] ARM: pxa: Introduce pxa[23]xx_map_io   Eric Miao
• [PATCH 01/14 v2] ARM: pxa: Introduce pxa[23]xx_map_io   Marek Vasut
• [PATCH 01/20 v2] msm: create config option for proc-comm   Jeff Ohlstein
• [PATCH 01/26] ARM: S5PC100: Debug clock sources   Jassi Brar
• [PATCH 01/27] ARM: SAMSUNG: Add GPIO configuration for a range of pins   Kukjin Kim
• [PATCH 01/47] davinci: da850 evm: sparse cleanup: make file local variables static   Kevin Hilman
• [PATCH 02/08] ARM: Move macros from entry-armv.S   Magnus Damm
• [PATCH 02/10] ARM: hotplug cpu: setup 1:1 map for entire kernel image for secondary CPUs   Russell King - ARM Linux
• [PATCH 02/10] ARM: hotplug cpu: setup 1:1 map for entire kernel image for secondary CPUs   Nicolas Pitre
• [PATCH 02/10] ARM: hotplug cpu: setup 1:1 map for entire kernel image for secondary CPUs   Russell King - ARM Linux
• [PATCH 02/10] OMAP2420: CTRL: fix OMAP242X_CTRL_REGADDR macro   Paul Walmsley
• [PATCH 02/12] ARM: smp: Convert stop_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 02/13] ARM: pxa: Access SMEMC via virtual addresses   Marek Vasut
• [PATCH 02/13] ARM: pxa: Access SMEMC via virtual addresses   Haojian Zhuang
• [PATCH 02/13] ARM: pxa: Access SMEMC via virtual addresses   Marek Vasut
• [PATCH 02/14 v2] ARM: pxa: Access SMEMC via virtual addresses   Marek Vasut
• [PATCH 02/14 v2] ARM: pxa: Access SMEMC via virtual addresses   Haojian Zhuang
• [PATCH 02/14] omap: Map only available sram memory   Grazvydas Ignotas
• [PATCH 02/14] omap: Map only available sram memory   Tony Lindgren
• [PATCH 02/14] omap: Map only available sram memory   Shilimkar, Santosh
• [PATCH 02/14] omap: Map only available sram memory   Grazvydas Ignotas
• [PATCH 02/14] omap: Map only available sram memory   Shilimkar, Santosh
• [PATCH 02/14] omap: Map only available sram memory   Shilimkar, Santosh
• [PATCH 02/14] omap: Map only available sram memory   Grazvydas Ignotas
• [PATCH 02/14] omap: Map only available sram memory   Tony Lindgren
• [PATCH 02/14] omap: Map only available sram memory   Tony Lindgren
• [PATCH 02/14] omap: Map only available sram memory   Shilimkar, Santosh
• [PATCH 02/20 v2] msm: io: MSM8X60 io support   Jeff Ohlstein
• [PATCH 02/27] ARM: S3C64XX: Change dev-audio.c to use S3C_GPIO_SFN() for special functions   Kukjin Kim
• [PATCH 02/47] MAINTAINERS: Add Kevin's e-mail in entry for TI DaVinci   Kevin Hilman
• [PATCH 03/08] ARM: Make alignment_trap macro self-contained   Magnus Damm
• [PATCH 03/10] ARM: hotplug cpu: Keep processor information, startup code & __lookup_processor_type   Russell King - ARM Linux
• [PATCH 03/10] ARM: hotplug cpu: Keep processor information, startup code & __lookup_processor_type   Jeff Ohlstein
• [PATCH 03/10] ARM: hotplug cpu: Keep processor information, startup code & __lookup_processor_type   Russell King - ARM Linux
• [PATCH 03/10] OMAP2420: clock: add MCBSP_CLKS node and clkdev aliases   Paul Walmsley
• [PATCH 03/12] ARM: Convert die_lock and undef_lock to raw_spinlocks   Uwe Kleine-König
• [PATCH 03/13] ARM: pxa: Toradex Colibri PXA270 CF support   Marek Vasut
• [PATCH 03/14 RESEND] ARM: pxa: Toradex Colibri PXA270 CF support   Marek Vasut
• [PATCH 03/20 v2] msm: initial irq definitions for MSM8X60   Jeff Ohlstein
• [PATCH 03/20 v2] msm: initial irq definitions for MSM8X60   David Brown
• [PATCH 03/27] ARM: S3C64XX: Change to using s3c_gpio_cfgpin_range()   Kukjin Kim
• [PATCH 03/39] arch/arm: Update WARN uses   Joe Perches
• [PATCH 03/47] davinci: clock: make 'disable unused clocks' printk debug only   Kevin Hilman
• [PATCH 04/08] ARM: Convert __irq_svc and __usr_svc to macros   Magnus Damm
• [PATCH 04/10] ARM: cleanup boot cpu calling __mmap_switched   Russell King - ARM Linux
• [PATCH 04/10] OMAP2430: clock: add MCBSP_CLKS node and clkdev aliases   Paul Walmsley
• [PATCH 04/12] ARM: Convert l2x0_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 04/13] ARM: pxa: Push Colibri evalboard MFP into module files   Marek Vasut
• [PATCH 04/14 RESEND] ARM: pxa: Push Colibri evalboard MFP into module files   Marek Vasut
• [PATCH 04/20 v2] msm: irqs-8x60: interrupt map   Jeff Ohlstein
• [PATCH 04/22] arm: introduce little endian bitops   Akinobu Mita
• [PATCH 04/22] arm: introduce little endian bitops   Russell King - ARM Linux
• [PATCH 04/22] arm: introduce little endian bitops   Akinobu Mita
• [PATCH 04/22] arm: introduce little endian bitops   Russell King - ARM Linux
• [PATCH 04/22] arm: introduce little endian bitops   Russell King - ARM Linux
• [PATCH 04/22] arm: introduce little endian bitops   Arnd Bergmann
• [PATCH 04/22] arm: introduce little endian bitops   Russell King - ARM Linux
• [PATCH 04/27] ARM: S5P6442: Change to using s3c_gpio_cfgpin_range()   Kukjin Kim
• [PATCH 04/47] davinci: cpufreq: bailout on regulator errors   Kevin Hilman
• [PATCH 05/08] ARM: Move the unwind header to entry-header.S   Magnus Damm
• [PATCH 05/10] ARM: move __mmap_switched, C-API functions to init section   Russell King - ARM Linux
• [PATCH 05/10] OMAP3xxx: clock: add clkdev aliases for McBSP fclk source switching   Paul Walmsley
• [PATCH 05/11] omap3: Remove non-existent config option   Marathe, Yogesh
• [PATCH 05/11] omap3: Remove non-existent config option   Guzman Lugo, Fernando
• [PATCH 05/11] omap3: Remove non-existent config option   Marathe, Yogesh
• [PATCH 05/11] omap3: Remove non-existent config option   Felipe Contreras
• [PATCH 05/11] omap3: Remove non-existent config option   Marathe, Yogesh
• [PATCH 05/12] ARM: Convert cpu_asid_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 05/13] ARM: pxa: Add M41T00 RTC support into Colibri evalboard   Marek Vasut
• [PATCH 05/14 RESEND] ARM: pxa: Add M41T00 RTC support into Colibri evalboard   Marek Vasut
• [PATCH 05/20 v2] msm: timer: support 8x60 timers   Jeff Ohlstein
• [PATCH 05/27] ARM: S5P64X0: Change to using s3c_gpio_cfgpin_range()   Kukjin Kim
• [PATCH 05/47] davinci: clean up inconsistent usage of spaces in Kconfig   Kevin Hilman
• [PATCH 06/08] ARM: Add setup_irq_stubs() function   Magnus Damm
• [PATCH 06/10] ARM: hotplug cpu: move __error and __error_p to cpuinit section   Russell King - ARM Linux
• [PATCH 06/10] OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c   Paul Walmsley
• [PATCH 06/12] ARM: Convert xscale minicache_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 06/13] ARM: pxa: Rename Colibri evalboard   Marek Vasut
• [PATCH 06/14 RESEND] ARM: pxa: Rename Colibri evalboard   Marek Vasut
• [PATCH 06/20 v2] msm: MSM8X60 RUMI3 board support   Jeff Ohlstein
• [PATCH 06/27] ARM: S5P64X0: 2nd Change to using s3c_gpio_cfgpin_range()   Kukjin Kim
• [PATCH 06/27] ARM: S5P64X0: 2nd Change to using s3c_gpio_cfgpin_range()   Kyungmin Park
• [PATCH 06/27] ARM: S5P64X0: 2nd Change to using s3c_gpio_cfgpin_range()   Kukjin Kim
• [PATCH 06/47] davinci: introduce support for AM1x ARM9 microprocessors   Kevin Hilman
• [PATCH 07/08] ARM: Add CONFIG_DEFAULT_IRQ_DEMUX   Magnus Damm
• [PATCH 07/10] ARM: cleanup lookup_machine_type data and ensure these are placed in __HEAD   Russell King - ARM Linux
• [PATCH 07/10] OMAP: McBSP: implement functional clock switching via clock framework   Peter Ujfalusi
• [PATCH 07/10] OMAP: McBSP: implement functional clock switching via clock framework   Paul Walmsley
• [PATCH 07/10] OMAP: McBSP: implement functional clock switching via clock framework   Paul Walmsley
• [PATCH 07/12] ARM: Convert v4 minicache_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 07/13] ARM: pxa: Colibri PXA320 PCMCIA driver   Marek Vasut
• [PATCH 07/14 RESEND] ARM: pxa: Colibri PXA320 PCMCIA driver   Marek Vasut
• [PATCH 07/20 v2] msm: irq: rename existing entry-macro to entry-macro-vic   Jeff Ohlstein
• [PATCH 07/27] ARM: S5PC100: Change to using s3c_gpio_cfgpin_range()   Kukjin Kim
• [PATCH 07/47] davinci: am18x/da850/omap-l138: use 'NOM' voltage defined in datasheet as min voltage   Kevin Hilman
• [PATCH 08/08] ARM: Dynamic IRQ demux for SH-Mobile   Magnus Damm
• [PATCH 08/10] ARM: hotplug cpu: ensure that __enable_mmu is identity mapped   Russell King - ARM Linux
• [PATCH 08/10] OMAP: split plat-omap/common.c   Paul Walmsley
• [PATCH 08/10] OMAP: split plat-omap/common.c   Shilimkar, Santosh
• [PATCH 08/10] OMAP: split plat-omap/common.c   Varadarajan, Charulatha
• [PATCH 08/10] OMAP: split plat-omap/common.c   Paul Walmsley
• [PATCH 08/10] OMAP: split plat-omap/common.c   Felipe Balbi
• [PATCH 08/10] OMAP: split plat-omap/common.c   Felipe Balbi
• [PATCH 08/10] OMAP: split plat-omap/common.c   Shilimkar, Santosh
• [PATCH 08/10] OMAP: split plat-omap/common.c   Varadarajan, Charulatha
• [PATCH 08/10] OMAP: split plat-omap/common.c   Cousson, Benoit
• [PATCH 08/10] OMAP: split plat-omap/common.c   DebBarma, Tarun Kanti
• [PATCH 08/10] OMAP: split plat-omap/common.c   Cousson, Benoit
• [PATCH 08/10] OMAP: split plat-omap/common.c   Tony Lindgren
• [PATCH 08/10] OMAP: split plat-omap/common.c   Tony Lindgren
• [PATCH 08/10] OMAP: split plat-omap/common.c   Paul Walmsley
• [PATCH 08/10] OMAP: split plat-omap/common.c   Paul Walmsley
• [PATCH 08/10] OMAP: split plat-omap/common.c   Paul Walmsley
• [PATCH 08/10] OMAP: split plat-omap/common.c   Paul Walmsley
• [PATCH 08/10] OMAP: split plat-omap/common.c   Shilimkar, Santosh
• [PATCH 08/10] OMAP: split plat-omap/common.c   Paul Walmsley
• [PATCH 08/10] OMAP: split plat-omap/common.c   Shilimkar, Santosh
• [PATCH 08/10] OMAP: split plat-omap/common.c   Sergei Shtylyov
• [PATCH 08/10] OMAP: split plat-omap/common.c   Paul Walmsley
• [PATCH 08/12] ARM: Convert v6_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 08/13] ARM: pxa: Modularize Palm Tungsten|C   Marek Vasut
• [PATCH 08/14 RESEND] ARM: pxa: Modularize Palm Tungsten|C   Marek Vasut
• [PATCH 08/20 v2] msm: 8x60: gic initialization fixup for RUMI   Jeff Ohlstein
• [PATCH 08/27] ARM: S5PV210: Change to using s3c_gpio_cfgpin_range()   Kukjin Kim
• [PATCH 08/47] davinci: dm365: disable pulldowns for all MMC/SD1 pins.   Kevin Hilman
• [PATCH 09/10] ARM: hotplug cpu: move secondary_startup, __enable_mmu to cpuinit   Russell King - ARM Linux
• [PATCH 09/10] OMAP: control: move plat-omap/control.h to mach-omap2/control.h   Paul Walmsley
• [PATCH 09/12] ARM: footbridge: Convert gpio and led locks to raw_spinlock   Uwe Kleine-König
• [PATCH 09/13] UCB1400: Pass ucb1400-gpio data through ac97 bus   Marek Vasut
• [PATCH 09/14 RESEND] UCB1400: Pass ucb1400-gpio data through ac97 bus   Marek Vasut
• [PATCH 09/20 v2] msm: clock: add dummy clock driver   Jeff Ohlstein
• [PATCH 09/27] ARM: S5PV310: Change to using s3c_gpio_cfgpin_range()   Kukjin Kim
• [PATCH 09/47] davinci: clock: add support for setting sysclk rate   Kevin Hilman
• [PATCH 1/10] ARM: S5PC100: Add S/PDIF platform device   Seungwhan Youn
• [PATCH 1/10] ARM: S5PC100: Add S/PDIF platform device   Mark Brown
• [PATCH 1/10] ARM: S5PC100: Add S/PDIF platform device   Kukjin Kim
• [patch 1/1] Add definitions for the h1940 buttons.   Arnaud Patard (Rtp)
• [patch 1/1] Add definitions for the h1940 buttons.   Ben Dooks
• [PATCH 1/1] Mx35pdk: enable debug board support   jgq516 at gmail.com
• [PATCH 1/1] Mx35pdk: enable debug board support   xiao jiang
• [PATCH 1/1] Mx35pdk: enable debug board support   Fabio Estevam
• [PATCH 1/1] Mx35pdk: enable debug board support   xiao jiang
• [PATCH 1/1] Mx35pdk: enable debug board support   Fabio Estevam
• [PATCH 1/1] Mx35pdk: enable debug board support   xiao jiang
• [PATCH 1/1] Mx35pdk: enable debug board support   Fabio Estevam
• [PATCH 1/1] Mx35pdk: enable debug board support   Fabio Estevam
• [PATCH 1/1] Mx35pdk: enable debug board support   xiao jiang
• [PATCH 1/1] Mx35pdk: enable debug board support   Fabio Estevam
• [PATCH 1/2] [ARM] Dove: add support for GPIOs 64-71   Mike Rapoport
• [PATCH 1/2] [ARM] Kirkwood: enhance TLCK detection   Simon Guinot
• [PATCH 1/2] [ARM] Kirkwood: enhance TLCK detection   Lennert Buytenhek
• [PATCH 1/2] [ARM] Kirkwood: enhance TLCK detection   Saeed Bishara
• [PATCH 1/2] [ARM] Kirkwood: enhance TLCK detection   Saeed Bishara
• [PATCH 1/2] [ARM] Kirkwood: enhance TLCK detection   Simon Guinot
• [PATCH 1/2] [ARM] Kirkwood: enhance TLCK detection   Lennert Buytenhek
• [PATCH 1/2] [ARM] Kirkwood: enhance TLCK detection   Saeed Bishara
• [PATCH 1/2] [ARM] Kirkwood: enhance TLCK detection   Lennert Buytenhek
• [PATCH 1/2] [v2]ARM: S3C64XX: Fix USB and 48M clock enable procedure   Paulius Zaleckas
• [PATCH 1/2] Add the GPIO Write Protection Solution on i.MX51 BBG board   Baruch Siach
• [PATCH 1/2] Add the GPIO Write Protection Solution on i.MX51 BBG board   Richard Zhu
• [PATCH 1/2] Add the GPIO write protection solution to esdhc device on MX51 BBG   Richard Zhu
• [PATCH 1/2] Add WarpComm TK71 board support   Nils Faerber
• [patch 1/2] ARM: Add zboot support for SuperH Mobile ARM   Simon Horman
• [PATCH 1/2] ARM: fixup TCM memory types   Linus Walleij
• [PATCH 1/2] ARM: imx: Add wake functionality to GPIO   Dinh.Nguyen at freescale.com
• [PATCH 1/2] ARM: imx: Add wake functionality to GPIO   Russell King - ARM Linux
• [PATCH 1/2] ARM: imx: Add wake functionality to GPIO   Baruch Siach
• [PATCH 1/2] ARM: imx: Add wake functionality to GPIO   Sascha Hauer
• [PATCH 1/2] arm: omap1: devices: need to return with a value   Felipe Balbi
• [PATCH 1/2] arm: omap1: devices: need to return with a value   Uwe Kleine-König
• [PATCH 1/2] ARM: pxa: Fix number of IRQs on Balloon3   Marek Vasut
• [PATCH 1/2] ARM: S3C64XX: Add suspend support   Maurus Cuelenaere
• [PATCH 1/2] ARM: S3C64XX: Add suspend support   Kyungmin Park
• [PATCH 1/2] ARM: S3C64XX: Add suspend support   Maurus Cuelenaere
• [PATCH 1/2] ARM: S3C64XX: Add suspend support   Kyungmin Park
• [PATCH 1/2] ARM: S3C64XX: Add suspend support   Ben Dooks
• [PATCH 1/2] ARM: S3C64XX: Add suspend support   Maurus Cuelenaere
• [PATCH 1/2] ARM: S3C64XX: Fix USB and 48M clock enable procedure   Paulius Zaleckas
• [PATCH 1/2] ARM: S3C64XX: Fix USB and 48M clock enable procedure   Maurus Cuelenaere
• [PATCH 1/2] ARM: S5PV310: Add support SROMC   Sangbeom Kim
• [PATCH 1/2] ARM: S5PV310: Add support SROMC   Marek Szyprowski
• [PATCH 1/2] ARM: S5PV310: Add support SROMC   Daein Moon
• [PATCH 1/2] ARM: S5PV310: Add support SROMC   Kukjin Kim
• [PATCH 1/2] ARM: S5PV310: Add the definition for external interrupt   Jongsun Han
• [PATCH 1/2] ARM: SAMSUNG: Add setname core function for S3C24XX NAND   Kukjin Kim
• [PATCH 1/2] ARM: SAMSUNG: Add support for Power Domain control   Kukjin Kim
• [PATCH 1/2] ASoC: Add CS4271 codec support   Ryan Mallon
• [PATCH 1/2] ASoC: Add CS4271 codec support   Mark Brown
• [PATCH 1/2] ASoC: Add CS4271 codec support   Mark Brown
• [PATCH 1/2] ASoC: Add CS4271 codec support   Ryan Mallon
• [PATCH 1/2] ASoC: Add CS4271 codec support   Timur Tabi
• [PATCH 1/2] ASoC: Add CS4271 codec support   Ryan Mallon
• [PATCH 1/2] AT91: pm: use plain cpu_do_idle() for "wait for interrupt"   Nicolas Ferre
• [PATCH 1/2] clock-mx51: factorize clk_set_parent and clk_get_rate   Eric Bénard
• [PATCH 1/2] Fixing ethernet driver compilation error for i.MX31 ADS board   Ian Lartey
• [PATCH 1/2] Fixing ethernet driver compilation error for i.MX31 ADS board   Uwe Kleine-König
• [PATCH 1/2] gic: Add functions to save and restore gic state   Linus Walleij
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Chris Moore
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH 1/2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH 1/2] leds: add LED driver for Big Network series LEDs   Simon Guinot
• [PATCH 1/2] mmc: quirk fix for timeout problem   Shawn Guo
• [PATCH 1/2] mmc: quirk fix for timeout problem   Wolfram Sang
• [PATCH 1/2] mmc: quirk fix for timeout problem   Shawn Guo
• [PATCH 1/2] mmc: quirk fix for timeout problem   Wolfram Sang
• [PATCH 1/2] mmc: quirk fix for timeout problem   Nicolas Pitre
• [PATCH 1/2] mmc: quirk fix for timeout problem   Shawn Guo
• [PATCH 1/2] mmc: quirk fix for timeout problem   Eric Bénard
• [PATCH 1/2] mmc: quirk fix for timeout problem   Shawn Guo
• [PATCH 1/2] MMCI: add some register defines for ST Micro variants   Linus Walleij
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   viresh kumar
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   David Woodhouse
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   Linus Walleij
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   David Woodhouse
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   Vipin Kumar
• [PATCH 1/2] MTD: generic FSMC NAND MTD driver   David Woodhouse
• [PATCH 1/2] mx31_3ds: Add LCD support   Fabio Estevam
• [PATCH 1/2] mx31_3ds: Add LCD support   Uwe Kleine-König
• [PATCH 1/2] mx31_3ds: Add LCD support   Fabio Estevam
• [PATCH 1/2] mx35_3ds: add mmc support   Shawn Guo
• [PATCH 1/2] mx5: add cpuimx51sd module and its baseboard   Eric Bénard
• [PATCH 1/2] OMAP3: CPUidle: remove redundant setting of PER next power state   Kevin Hilman
• [PATCH 1/2] OMAP: DSS2: Add Powertip PH480272T display panel   Enric Balletbo i Serra
• [PATCH 1/2] omap: iommu: make iva2 iommu selectable   Hiroshi DOYU
• [PATCH 1/2] omap: iommu: make iva2 iommu selectable   Felipe Contreras
• [PATCH 1/2] omap: iommu: make iva2 iommu selectable   Guzman Lugo, Fernando
• [PATCH 1/2] omap: iommu: make iva2 iommu selectable   Felipe Contreras
• [PATCH 1/2] rtc: avoid checking cpuid in pxa-rtc   Alessandro Zummo
• [PATCH 1/2] rtc: avoid checking cpuid in pxa-rtc   Robert Jarzmik
• [PATCH 1/2] S3C64XX: Ensure samsung_keypad_cfg_gpio() is prototyped   Kukjin Kim
• [PATCH 1/2] S3C64XX: Ensure samsung_keypad_cfg_gpio() is prototyped   Mark Brown
• [PATCH 1/2] S3C64XX: Ensure samsung_keypad_cfg_gpio() is prototyped   Kukjin Kim
• [PATCH 1/2] S3C64XX: Ensure samsung_keypad_cfg_gpio() is prototyped   Mark Brown
• [PATCH 1/2] S3C64XX: Ensure samsung_keypad_cfg_gpio() is prototyped   Mark Brown
• [PATCH 1/2] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Eric Bénard
• [PATCH 1/2] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Wolfram Sang
• [PATCH 1/2] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Chris Ball
• [PATCH 1/2] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Eric Bénard
• [PATCH 1/2] video: omap: vram: remove from normal memory   Felipe Contreras
• [PATCH 1/2] video: omap: vram: remove from normal memory   Tomi Valkeinen
• [PATCH 1/2] video: omap: vram: remove from normal memory   Tomi Valkeinen
• [PATCH 1/2] video: omap: vram: remove from normal memory   Tony Lindgren
• [PATCH 1/2] video: omap: vram: remove from normal memory   Felipe Contreras
• [PATCH 1/2] video: omap: vram: remove from normal memory   Tomi Valkeinen
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Daniel Walker
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Stephen Boyd
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Daniel Walker
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Nicolas Pitre
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Stephen Boyd
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Daniel Walker
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Nicolas Pitre
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Stephen Boyd
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Stephen Boyd
• [PATCH 1/3] [ARM] Translate delay.S into (mostly) C   Nicolas Pitre
• [PATCH 1/3] Add Mindspeed Comcerto platform support   stanleymiao at gmail.com
• [PATCH 1/3] Add Mindspeed Comcerto platform support   Russell King - ARM Linux
• [PATCH 1/3] AM35x: Add musb support   Felipe Balbi
• [PATCH 1/3] arm: imx: add generic esdhc device   Wolfram Sang
• [PATCH 1/3] ARM: imx: fix/define clocks and create devices for imx dma   Fabio Estevam
• [PATCH 1/3] ARM: imx: fix/define clocks and create devices for imx dma   Sascha Hauer
• [PATCH 1/3] ARM: imx: fix/define clocks and create devices for imx dma   Uwe Kleine-König
• [PATCH 1/3] arm: mm: allow boards to fiddle with meminfo   Felipe Contreras
• [PATCH 1/3] arm: mm: allow boards to fiddle with meminfo   Russell King - ARM Linux
• [PATCH 1/3] arm: mm: allow boards to fiddle with meminfo   Felipe Contreras
• [PATCH 1/3] ARM: move timer-sp.c from versatile to common   Russell King - ARM Linux
• [PATCH 1/3] ARM: mx3: use MX3x_ prefixed version of CHIP_REV_x   Uwe Kleine-König
• [PATCH 1/3] ARM: S5P: Add GPIO2 memory map definition   Jongsun Han
• [PATCH 1/3] ARM: S5PC110: Fix wrong interrupt I2C2 and I2C3 number   Marek Szyprowski
• [PATCH 1/3] ARM: S5PV210: Add i2c information to Goni and Aquila board   Chanwoo Choi
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Greg KH
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Kevin Hilman
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Grant Likely
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Kevin Hilman
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Arnd Bergmann
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Arnd Bergmann
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Arnd Bergmann
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Kevin Hilman
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Arnd Bergmann
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Ohad Ben-Cohen
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Arnd Bergmann
• [PATCH 1/3] drivers: misc: add omap_hwspinlock driver   Tony Lindgren
• [PATCH 1/3] imx-esdhc: update devices registration   Eric Bénard
• [PATCH 1/3] imx-esdhc: update devices registration   Uwe Kleine-König
• [PATCH 1/3] imx-esdhc: update devices registration   Eric Bénard
• [PATCH 1/3] imx-esdhc: update devices registration   Uwe Kleine-König
• [PATCH 1/3] imx: make IMX_IO_ADDRESS assembly compatible   Uwe Kleine-König
• [PATCH 1/3] mmci: work with only one irq   Linus Walleij
• [PATCH 1/3] mx51: add support for genesi efikamx nettop   Amit Kucheria
• [PATCH 1/3] mx51: add support for genesi efikamx nettop   Uwe Kleine-König
• [PATCH 1/3] mx51: add support for genesi efikamx nettop   Amit Kucheria
• [PATCH 1/3] omap4: pandaboard: remove unused hsmmc definition   David Anders
• [PATCH 1/3] OMAP: PM: formalize idle notifications   Kevin Hilman
• [PATCH 1/3] OMAP: PM: formalize idle notifications   Tony Lindgren
• [PATCH 1/3] OMAP: PM: formalize idle notifications   Kevin Hilman
• [PATCH 1/4 v3] V4L/DVB: s5p-fimc: Register definition cleanup   Sylwester Nawrocki
• [PATCH 1/4] ARM: ep93xx: DMA: fix channel_disable   Mika Westerberg
• [PATCH 1/4] ARM: ep93xx: DMA: fix channel_disable   Ryan Mallon
• [PATCH 1/4] ARM: S3C2416: Add USB Phy register definitions   Sangbeom Kim
• [PATCH 1/4] ARM: S5P6440: I2S: Upgrade platform device   Jassi Brar
• [PATCH 1/4] ARM: S5PV310: Add FIMD resource definition   Sangbeom Kim
• [PATCH 1/4] ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL   Maurus Cuelenaere
• [PATCH 1/4] ARM: SAMSUNG: Move the start address of Samsung SoCs' VA space   Jassi Brar
• [PATCH 1/4] ARM: SAMSUNG: Move the start address of Samsung SoCs' VA space   Kukjin Kim
• [PATCH 1/4] ARM: smp_twd: mpcore_wdt: Fix watchdog counter loading   vkuzmichev at mvista.com
• [PATCH 1/4] caif-u5500: Adding shared memory include   Sjur Braendeland
• [PATCH 1/4] clock-mx51: factorize clk_set_parent and clk_get_rate   Eric Bénard
• [PATCH 1/4] mach-cpuimx35: remove unecessary tsc2007 functions + style cleanup   Eric Bénard
• [PATCH 1/4] mx31_3ds: Remove unused debug board definitions   Rogerio Pimentel
• [PATCH 1/4] mx31_3ds: Remove unused debug board definitions   Jason Wang
• [PATCH 1/4] omap4: pandaboard: remove unused hsmmc definition   David Anders
• [PATCH 1/5 v4] V4L/DVB: s5p-fimc: Register definition cleanup   Sylwester Nawrocki
• [PATCH 1/5 v4] V4L/DVB: s5p-fimc: Register definition cleanup   박세운
• [PATCH 1/5 v4] V4L/DVB: s5p-fimc: Register definition cleanup   Sylwester Nawrocki
• [PATCH 1/5] arm/nomadik: remove duplicated include   Nicolas Kaiser
• [PATCH 1/5] ARM: remove dependency of platform code on CLOCK_TICK_RATE / LATCH defines   Lennert Buytenhek
• [PATCH 1/5] ARM: remove dependency of platform code on CLOCK_TICK_RATE / LATCH defines   Uwe Kleine-König
• [PATCH 1/5] ARM: remove dependency of platform code on CLOCK_TICK_RATE / LATCH defines   H Hartley Sweeten
• [PATCH 1/5] ARM: S5P6442: Add DMA operation clock   Kukjin Kim
• [PATCH 1/5] ARM: S5P6442: Add DMA operation clock   Ben Dooks
• [PATCH 1/5] ARM: S5P6442: Add DMA operation clock   Kukjin Kim
• [PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration   Marek Szyprowski
• [PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration   Jeongbae Seo
• [PATCH 1/5] Fix AT91SAM9G20 reset as per the errata in the data sheet   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] Fix AT91SAM9G20 reset as per the errata in the data sheet   Nicolas Ferre
• [PATCH 1/5] Fix AT91SAM9G20 reset as per the errata in the data sheet   Nicolas Ferre
• [PATCH 1/5] mach-pcm037_eet: fix compile errors   Eric Bénard
• [PATCH 1/5] mach-pcm037_eet: fix compile errors   Uwe Kleine-König
• [PATCH 1/6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Arnd Bergmann
• [PATCH 1/6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Arnd Bergmann
• [PATCH 1/6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Arnd Bergmann
• [PATCH 1/6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Arnd Bergmann
• [PATCH 1/6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data   Wolfram Sang
• [PATCH 1/6] mmc: sdhci-pltfm: Add structure for host-specific data   Wolfram Sang
• [PATCH 1/6] n35: fix key codes   Jiri.Pinkava at vscht.cz
• [PATCH 1/6] n35: fix key codes and types   Jiří Pinkava
• [PATCH 1/6] n35: fix key codes and types   Ben Dooks
• [PATCH 1/6] n35: fix key codes and types   Jiří Pinkava
• [PATCH 1/6] Realview PCIX support - add main support module code   Colin Tuckley
• [PATCH 1/6] Realview PCIX support - add main support module code   Arnd Bergmann
• [PATCH 1/6] Realview PCIX support - add main support module code   Colin Tuckley
• [PATCH 1/6] Realview PCIX support - add main support module code   Arnd Bergmann
• [PATCH 1/6] Realview PCIX support - add main support module code   Russell King - ARM Linux
• [PATCH 1/6] Realview PCIX support - add main support module code   Russell King - ARM Linux
• [PATCH 1/6] Realview PCIX support - add main support module code   Arnd Bergmann
• [PATCH 1/6] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON   MyungJoo Ham
• [PATCH 1/6] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON   Kukjin Kim
• [PATCH 1/6] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON   MyungJoo Ham
• [PATCH 1/6] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON   Kukjin Kim
• [PATCH 1/6] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON   Kukjin Kim
• [PATCH 1/7] arm/versatile: move pci code to plat-versatile   Arnd Bergmann
• [PATCH 1/7] arm/versatile: move pci code to plat-versatile   Linus Walleij
• [PATCH 1/7] arm/versatile: move pci code to plat-versatile   Arnd Bergmann
• [PATCH 1/7] ARM: S5PC210: Universal OneNAND support   Kyungmin Park
• [PATCH 1/7] ARM: S5PC210: Universal OneNAND support   Kukjin Kim
• [PATCH 1/7] mailbox: change full flag per mailbox queue instead of global   Hari Kanigeri
• [PATCH 1/7] mx3: fix the last users of IMX_NEEDS_DEPRECATED_SYMBOLS   Uwe Kleine-König
• [PATCH 1/7] perf: Add helper function to return number of counters   Matt Fleming
• [PATCH 1/7] perf: Add helper function to return number of counters   Paul Mundt
• [PATCH 1/7] perf: Add helper function to return number of counters   Robert Richter
• [PATCH 1/7] perf: Add helper function to return number of counters   Robert Richter
• [PATCH 1/7] perf: Add helper function to return number of counters   Peter Zijlstra
• [PATCH 1/7] perf: Add helper function to return number of counters   Matt Fleming
• [PATCH 1/7] pwm: Add pwm core driver   Trilok Soni
• [PATCH 1/7] pwm: Add pwm core driver   Arun MURTHY
• [PATCH 1/7] pwm: Add pwm core driver   Jassi Brar
• [PATCH 1/7] pwm: Add pwm core driver   Arun MURTHY
• [PATCH 1/7] pwm: Add pwm core driver   Jassi Brar
• [PATCH 1/7] pwm: Add pwm core driver   Mark Brown
• [PATCH 1/7] pwm: Add pwm core driver   Arun MURTHY
• [PATCH 1/8] omap: Fix omap_mux_init_signal not to trash muxname   Tony Lindgren
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Fernando Guzman Lugo
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Felipe Contreras
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Guzman Lugo, Fernando
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Felipe Contreras
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Guzman Lugo, Fernando
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Felipe Contreras
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Guzman Lugo, Fernando
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Felipe Contreras
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Guzman Lugo, Fernando
• [PATCH 1/8] staging: tidspbridge - remove req_addr from proc_map   Russell King - ARM Linux
• [PATCH 1/9] ARM: S3C64XX: add frame buffer support for mach-real6410   Kukjin Kim
• [PATCH 1/9] ARM: S3C64XX: add frame buffer support for mach-real6410   Darius Augulis
• [patch 1/9] efikamx: read board id   Arnaud Patard (Rtp)
• [patch 1/9] efikamx: read board id   Sascha Hauer
• [patch 1/9] efikamx: read board id   Matt Sealey
• [patch 1/9] efikamx: read board id   Amit Kucheria
• [patch 1/9] efikamx: read board id   Arnaud Patard (Rtp)
• [patch 1/9] efikamx: read board id   Sascha Hauer
• [patch 1/9] efikamx: read board id   Arnaud Patard (Rtp)
• [patch 1/9] efikamx: read board id   Matt Sealey
• [patch 1/9] efikamx: read board id   Amit Kucheria
• [patch 1/9] efikamx: read board id   Uwe Kleine-König
• [patch 1/9] efikamx: read board id   Matt Sealey
• [patch 1/9] efikamx: read board id   Loïc Minier
• [patch 1/9] efikamx: read board id   Arnaud Patard (Rtp)
• [patch 1/9] efikamx: read board id   Matt Sealey
• [patch 1/9] efikamx: read board id   Matt Sealey
• [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs   Jassi Brar
• [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs   Kukjin Kim
• [PATCH 10/10] ARM: add register documentation for __enable_mmu   Russell King - ARM Linux
• [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Mark Brown
• [PATCH 10/10] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Seungwhan Youn
• [PATCH 10/10] OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks   Paul Walmsley
• [PATCH 10/12] ARM: integrator: Convert cm_lock and v3_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 10/13] ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270   Marek Vasut
• [PATCH 10/14 RESEND] ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270   Marek Vasut
• [PATCH 10/20 v2] msm: dma: add stub functions for dma features not yet present on 8x60   Jeff Ohlstein
• [PATCH 10/27] ARM: SAMSUNG: Add s3c_gpio_cfgall_range() function   Kukjin Kim
• [PATCH 10/47] davinci: cpufreq: add support for keeping an additional clock constant   Kevin Hilman
• [PATCH 11/12] ARM: ixp4xx: Convert pci_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 11/13] ARM: pxa: Pass GPIO offset to ucb1400-gpio on PalmTC   Marek Vasut
• [PATCH 11/14 RESEND] ARM: pxa: Pass GPIO offset to ucb1400-gpio on PalmTC   Marek Vasut
• [PATCH 11/20 v2] msm: allow uart to be conditionally disabled   Jeff Ohlstein
• [PATCH 11/27] ARM: S3C64XX: Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 11/47] davinci: am18x/da850/omap-l138: keep async clock constant with cpufreq   Kevin Hilman
• [PATCH 12/12] ARM: shark: Convert leds_lock to raw_spinlock   Uwe Kleine-König
• [PATCH 12/13] ARM: pxa: Add gpio-leds and vibrator support to PalmTC   Haojian Zhuang
• [PATCH 12/13] ARM: pxa: Add gpio-leds and vibrator support to PalmTC   Marek Vasut
• [PATCH 12/13] ARM: pxa: Add gpio-leds and vibrator support to PalmTC   Marek Vasut
• [PATCH 12/14 RESEND] ARM: pxa: Add gpio-leds and vibrator support to PalmTC   Marek Vasut
• [PATCH 12/20 v2] msm: add build support for msm8x60 target   Jeff Ohlstein
• [PATCH 12/27] ARM: S5P6442: Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 12/47] Davinci: tnetv107x: retain psc reg base after init   Kevin Hilman
• [PATCH 13/13] ARM: pxa: Fix pxa2xx-flash section mismatch   Marek Vasut
• [PATCH 13/13] ARM: pxa: Fix pxa2xx-flash section mismatch   Haojian Zhuang
• [PATCH 13/13] ARM: pxa: Fix pxa2xx-flash section mismatch   Marek Vasut
• [PATCH 13/14 RESEND] ARM: pxa: Fix pxa2xx-flash section mismatch   Marek Vasut
• [PATCH 13/14 RESEND] ARM: pxa: Fix pxa2xx-flash section mismatch   Haojian Zhuang
• [PATCH 13/20 v2] msm: 8x60: setup correct handlers for private interrupts   Jeff Ohlstein
• [PATCH 13/27] ARM: S5P64X0: Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 13/47] DA850: move NAND/NOR pin lists to the board file   Kevin Hilman
• [PATCH 132/141] USB: AM35x: Add musb support   Greg Kroah-Hartman
• [PATCH 14/14 RESEND] Remove __devinitdata from tc6393xb_mmc_resources   Marek Vasut
• [PATCH 14/20 v2] msm: physical offset for MSM8X60   Jeff Ohlstein
• [PATCH 14/27] ARM: S5PC100: Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 14/39] drivers/media/video: Update WARN uses   Joe Perches
• [PATCH 14/47] DA850: move MII/RMII pin lists to the board file   Kevin Hilman
• [PATCH 15/20 v2] msm: add msm8x60_surf machine   Jeff Ohlstein
• [PATCH 15/27] ARM: S5PV210: Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 15/47] arm: mach-davinci: check irq2ctlr() result   Kevin Hilman
• [PATCH 16/20 v2] msm: MSM8X60 simulator board support   Jeff Ohlstein
• [PATCH 16/27] ARM: S5PV310: Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 16/47] DA850: Add LPSC id for MMCSD1 peripheral   Kevin Hilman
• [PATCH 17/20 v2] msm: add MSM8x60 FFA support   Jeff Ohlstein
• [PATCH 17/27] ARM: S3C64XX: 2nd Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 17/47] DA850: Split MMCSD clock into two to support both MMCSD peripherals   Kevin Hilman
• [PATCH 18/20 v2] msm: Add MSM IOMMU support   Jeff Ohlstein
• [PATCH 18/27] ARM: S5P64X0: 2nd Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 18/47] DA850: Add MMCSD1 resources, platform device and convenience registration function   Kevin Hilman
• [PATCH 19/20 v2] msm: Platform initialization for the IOMMU driver   Jeff Ohlstein
• [PATCH 19/20 v2] msm: Platform initialization for the IOMMU driver   Daniel Walker
• [PATCH 19/27] ARM: S5PC100: 2nd Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 19/47] davinci: dm365 evm: use EDMAQ_3 as the audio DMA queue   Kevin Hilman
• [PATCH 2.6.36] S3C64XX: Fix special function for IISv4 port   Mark Brown
• [PATCH 2.6.36] S3C64XX: Fix special function for IISv4 port   Mark Brown
• [PATCH 2.6.36] S3C64XX: Fix special function for IISv4 port   Kukjin Kim
• [PATCH 2.6.36] S3C64XX: Fix special function for IISv4 port   Kukjin Kim
• [PATCH 2/10] ARM: S5PC100: Modify SCLK_AUDIO{0,1,2} clock as sysclks   Mark Brown
• [PATCH 2/10] ARM: S5PC100: Modify SCLK_AUDIO{0,1,2} clock as sysclks   Kukjin Kim
• [PATCH 2/10] ARM: S5PC100: Modify SCLK_AUDIO{0,1,2} clock as sysclks   Seungwhan Youn
• [PATCH 2/2 v2] AT91: pm: make sure that r0 is 0 when dealing with cache operations   Nicolas Ferre
• [PATCH 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Mike Rapoport
• [PATCH 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Saeed Bishara
• [PATCH 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Mike Rapoport
• [PATCH 2/2] [ARM] Dove: add support for multi-purpose pins configuration   saeed bishara
• [PATCH 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Mike Rapoport
• [PATCH 2/2] [ARM] Dove: add support for multi-purpose pins configuration   saeed bishara
• [PATCH 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Eric Miao
• [PATCH 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Saeed Bishara
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2   Guenter Roeck
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2   Guenter Roeck
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2   Simon Guinot
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2   Guenter Roeck
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2   Guenter Roeck
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2   Nicolas Pitre
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2   Nicolas Pitre
• [PATCH 2/2] [ARM] Kirkwood: add fan support for Network Space Max v2   Simon Guinot
• [PATCH 2/2] [ARM] Kirkwood: add LED support for netxbig_v2 boards   Simon Guinot
• [PATCH 2/2] [ARM] Kirkwood: fix timer initialization for LaCie boards   Lennert Buytenhek
• [PATCH 2/2] [ARM] Kirkwood: fix timer initialization for LaCie boards   Simon Guinot
• [PATCH 2/2] Add the HW board caps flag for MX51 BBG   Richard Zhu
• [PATCH 2/2] Adding cs89x0, standard ethernet driver for iMX31 platform.   Ian Lartey
• [PATCH 2/2] Adding cs89x0, standard ethernet driver for iMX31 platform.   Uwe Kleine-König
• [PATCH 2/2] Adding cs89x0, standard ethernet driver for iMX31 platform.   Ian Lartey
• [PATCH 2/2] Adding cs89x0, standard ethernet driver for iMX31 platform.   Uwe Kleine-König
• [PATCH 2/2] Adding cs89x0, standard ethernet driver for iMX31 platform.   Ian Lartey
• [PATCH 2/2] ARM: add a TCM memory test   Linus Walleij
• [PATCH 2/2] ARM: imx: Add POWER_KEY to mx51 babbage board   Dinh.Nguyen at freescale.com
• [PATCH 2/2] ARM: imx: Add POWER_KEY to mx51 babbage board   Eric Bénard
• [patch 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Magnus Damm
• [patch 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [patch 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [PATCH 2/2] arm: omap1: remove unused variables   Felipe Balbi
• [PATCH 2/2] ARM: pxa: Update Balloon3 for new FPGA firmware   Marek Vasut
• [PATCH 2/2] ARM: S3C2416: Change S3C2416 NAND platform device name   Kukjin Kim
• [PATCH 2/2] ARM: S3C64XX: Add wakeup sources to SmartQ boards   Maurus Cuelenaere
• [PATCH 2/2] ARM: S5PV310: Add external interrupt support   Jongsun Han
• [PATCH 2/2] ARM: S5PV310: Add external interrupt support   Ben Dooks
• [PATCH 2/2] ARM: S5PV310: Add support Power Domain   Kukjin Kim
• [PATCH 2/2] ARM: S5PV310: Add support Power Domain   Marek Szyprowski
• [PATCH 2/2] ARM: S5PV310: Add support Power Domain   Ben Dooks
• [PATCH 2/2] ARM: S5PV310: Support ethernet for SMDKV310 and SMDKC210   Sangbeom Kim
• [PATCH 2/2] ASoC: EDB93xx machine sound driver   Ryan Mallon
• [PATCH 2/2] ASoC: EDB93xx machine sound driver   Mark Brown
• [PATCH 2/2] AT91: pm: make sure that r0 is 0 when dealing with cache operations   Russell King - ARM Linux
• [PATCH 2/2] AT91: pm: make sure that r0 is 0 when dealing with cache operations   Nicolas Ferre
• [PATCH 2/2] AT91: pm: make sure that r0 is 0 when dealing with cache operations   Nicolas Ferre
• [PATCH 2/2] babbage: esdhc device registration   Shawn Guo
• [PATCH 2/2] babbage: esdhc device registration   Wolfram Sang
• [PATCH 2/2] babbage: esdhc device registration   Amit Kucheria
• [PATCH 2/2] cpuimx51: update board support   Eric Bénard
• [PATCH 2/2] ftrace - add ftrace function_graph support on ARM   Rabin Vincent
• [PATCH 2/2] ftrace - add ftrace function_graph support on ARM   Rabin Vincent
• [PATCH 2/2] ftrace - add ftrace function_graph support on ARM   Russell King - ARM Linux
• [PATCH 2/2] ftrace - add ftrace function_graph support on ARM   Rabin Vincent
• [PATCH 2/2] ftrace - add ftrace function_graph support on ARM   Russell King - ARM Linux
• [PATCH 2/2] ftrace - add ftrace function_graph support on ARM   Rabin Vincent
• [PATCH 2/2] gic: Export irq chip functions   Linus Walleij
• [PATCH 2/2] gic: Export irq chip functions   Colin Cross
• [PATCH 2/2] MMCI: add SDIO support for ST Variants   Linus Walleij
• [PATCH 2/2] mx25_3ds: add mmc support   Shawn Guo
• [PATCH 2/2] mx31_3ds: Add touchscreen support   Fabio Estevam
• [PATCH 2/2] mx51: add resources for SD/MMC on i.MX51   Eric Bénard
• [PATCH 2/2] mx51: add resources for SD/MMC on i.MX51   Uwe Kleine-König
• [PATCH 2/2] mx51: add resources for SD/MMC on i.MX51   Eric Bénard
• [PATCH 2/2] mx51: add resources for SD/MMC on i.MX51   Uwe Kleine-König
• [PATCH 2/2] OMAP: DSS2: Add Seiko 70WVW1TZ3 display panel   Enric Balletbo i Serra
• [PATCH 2/2] OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set   Kevin Hilman
• [PATCH 2/2] omap: rx51: mark reserved memory earlier   Felipe Contreras
• [PATCH 2/2] omap: rx51: mark reserved memory earlier   Felipe Contreras
• [PATCH 2/2] rtc: use __devinit instead on pxa-rtc   Robert Jarzmik
• [PATCH 2/2] S3C64XX: Ensure s3c64xx_ide_setup_gpio() is prototyped   Mark Brown
• [PATCH 2/2] sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35   Wolfram Sang
• [PATCH 2/2] sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35   Eric Bénard
• [PATCH 2/2] sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35   Eric Bénard
• [PATCH 2/2] sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35   Eric Bénard
• [PATCH 2/2] USB: s3-hsotg: Remove PHY initialization code and use CLK API   Paulius Zaleckas
• [PATCH 2/2] USB: s3-hsotg: Remove PHY initialization code and use CLK API   Paulius Zaleckas
• [PATCH 2/3] [ARM] Allow machines to override __delay()   Daniel Walker
• [PATCH 2/3] [ARM] Allow machines to override __delay()   Stephen Boyd
• [PATCH 2/3] Add hardware timer support for Mindspeed Comcerto platflorm   stanleymiao at gmail.com
• [PATCH 2/3] Add hardware timer support for Mindspeed Comcerto platflorm   Russell King - ARM Linux
• [PATCH 2/3] Add hardware timer support for Mindspeed Comcerto platflorm   Stanley.Miao
• [PATCH 2/3] arm: imx35: add esdhc-device to MX35-platform   Wolfram Sang
• [PATCH 2/3] ARM: imx: dynamically register fec devices   Uwe Kleine-König
• [PATCH 2/3] ARM: mx35: Add mx35_revision function to query the silicon revision   Uwe Kleine-König
• [PATCH 2/3] arm: return both physical and virtual addresses from addruart   Daniel Walker
• [PATCH 2/3] arm: return both physical and virtual addresses from addruart   Russell King - ARM Linux
• [PATCH 2/3] arm: return both physical and virtual addresses from addruart   Daniel Walker
• [PATCH 2/3] arm: return both physical and virtual addresses from addruart   Daniel Walker
• [PATCH 2/3] arm: return both physical and virtual addresses from addruart   Uwe Kleine-König
• [PATCH 2/3] arm: return both physical and virtual addresses from addruart   Nicolas Pitre
• [PATCH 2/3] ARM: S5PC210: Define address & interrupt for all I2C blocks   Marek Szyprowski
• [PATCH 2/3] ARM: S5PV210: Add init code of audio to Goni and Aquila board   Mark Brown
• [PATCH 2/3] ARM: S5PV210: Add init code of audio to Goni and Aquila board   Kukjin Kim
• [PATCH 2/3] ARM: S5PV210: Add init code of audio to Goni and Aquila board   Jassi Brar
• [PATCH 2/3] ARM: S5PV210: Add init code of audio to Goni and Aquila board   Kyungmin Park
• [PATCH 2/3] ARM: S5PV210: Add init code of audio to Goni and Aquila board   Jassi Brar
• [PATCH 2/3] ARM: S5PV210: Add init code of audio to Goni and Aquila board   Mark Brown
• [PATCH 2/3] ARM: S5PV210: Add init code of audio to Goni and Aquila board   Chanwoo Choi
• [PATCH 2/3] ARM: S5PV310: Add the definition for external interrupt   Kukjin Kim
• [PATCH 2/3] ARM: S5PV310: Add the definition for external interrupt   Jongsun Han
• [PATCH 2/3] ARM: timer-sp: support timer clock freq other than 1MHz   Russell King - ARM Linux
• [PATCH 2/3] mmci: handle out-of-order IRQ events   Linus Walleij
• [PATCH 2/3] mx25: fix compile error in platform-imx-dma.c   Eric Bénard
• [PATCH 2/3] mx25: fix compile error in platform-imx-dma.c   Uwe Kleine-König
• [PATCH 2/3] mx51: efikamx: add otg support   Amit Kucheria
• [PATCH 2/3] mx51: efikamx: add otg support   Uwe Kleine-König
• [PATCH 2/3] mx51: efikamx: add otg support   Sergei Shtylyov
• [PATCH 2/3] OMAP4: hwmod data: Add hwspinlock   Ohad Ben-Cohen
• [PATCH 2/3] omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set   David Anders
• [PATCH 2/3] omap: dsp: fix ioremap() usage   Felipe Contreras
• [PATCH 2/3] omap: dsp: fix ioremap() usage   Premi, Sanjeev
• [PATCH 2/3] omap: dsp: fix ioremap() usage   Felipe Contreras
• [PATCH 2/3] omap: dsp: fix ioremap() usage   Guzman Lugo, Fernando
• [PATCH 2/3] omap: dsp: fix ioremap() usage   Felipe Contreras
• [PATCH 2/3] OMAP: INTC: use idle notifier for autoidle management   Kevin Hilman
• [PATCH 2/4 v3] V4L/DVB: s5p-fimc: M2M driver cleanup and minor improvements   Sylwester Nawrocki
• [PATCH 2/4] ARM: S3C24XX: Add plaform device definition for USB High-Speed gadget controller.   Sangbeom Kim
• [PATCH 2/4] ARM: S3C: Change VMALLOC_END to use more vmalloc()/ioremap() area   Kukjin Kim
• [PATCH 2/4] ARM: S5P6442: I2S: Upgrade platform device   Jassi Brar
• [PATCH 2/4] ARM: S5PV310: Add platform device and helper functions for FIMD   Sangbeom Kim
• [PATCH 2/4] ARM: SAMSUNG: Fix warning 's3c_pm_show_resume_irqs' defined but not used   Maurus Cuelenaere
• [PATCH 2/4] ARM: smp_twd: Fix typo in twd_timer_rate printout   vkuzmichev at mvista.com
• [PATCH 2/4] ASoC: add ep93xx AC97 audio driver   Mika Westerberg
• [PATCH 2/4] ASoC: add ep93xx AC97 audio driver   Mark Brown
• [PATCH 2/4] ASoC: add ep93xx AC97 audio driver   Mika Westerberg
• [PATCH 2/4] ASoC: add ep93xx AC97 audio driver   Mark Brown
• [PATCH 2/4] ASoC: add ep93xx AC97 audio driver   Mika Westerberg
• [PATCH 2/4] caif-u5500: CAIF shared memory transport protocol   Sjur Braendeland
• [PATCH 2/4] caif-u5500: CAIF shared memory transport protocol   David Miller
• [PATCH 2/4] clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability   Eric Bénard
• [PATCH 2/4] eukrea_mbimxsd for cpuimx35: add CAN & SDCard support   Eric Bénard
• [PATCH 2/4] mx31_3ds: Fix the logic for detecting the debug board   Rogerio Pimentel
• [PATCH 2/4] mx31_3ds: Fix the logic for detecting the debug board   Jason Wang
• [PATCH 2/4] omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set   Sergei Shtylyov
• [PATCH 2/4] omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set   David Anders
• [PATCH 2/5 v4] V4L/DVB: s5p-fimc: mem2mem driver refactoring and cleanup   Sylwester Nawrocki
• [PATCH 2/5] arm/tegra: remove duplicated include   Nicolas Kaiser
• [PATCH 2/5] ARM: S5PV210: Add DMA operation clock   Kukjin Kim
• [PATCH 2/5] ARM: S5PV310: Add HSMMC support into S5PV310 and S5PC210   Marek Szyprowski
• [PATCH 2/5] ARM: S5PV310: Add HSMMC support into S5PV310 and S5PC210   Jeongbae Seo
• [PATCH 2/5] AT91: trivial: align comment of at91sam9g20_reset with one more tab   Nicolas Ferre
• [PATCH 2/5] ks8695_wdt: explicitly define the SoC timer tick base rate   Yegor Yefremov
• [PATCH 2/5] ks8695_wdt: explicitly define the SoC timer tick base rate   Lennert Buytenhek
• [PATCH 2/5] ks8695_wdt: explicitly define the SoC timer tick base rate   Lennert Buytenhek
• [PATCH 2/5] mx25: add defconfig   Eric Bénard
• [PATCH 2/5] mx25: add defconfig   Uwe Kleine-König
• [PATCH 2/5] mx25: add defconfig   Eric Bénard
• [PATCH 2/6] ARM: enable bridges in pci_common_init.   Colin Tuckley
• [PATCH 2/6] mmc: sdhci-pltfm: move .h-file into apropriate subdir   Wolfram Sang
• [PATCH 2/6] mmc: sdhci-pltfm: move .h-file into apropriate subdir   Wolfram Sang
• [PATCH 2/6] n35: Update GPIO documentation for Acer n35   Jiří Pinkava
• [PATCH 2/6] n35: Update GPIO documentation for Acer n35   Jiri.Pinkava at vscht.cz
• [PATCH 2/6] rtc: rtc-s3c: Fix setting missing field of getalarm   Kukjin Kim
• [PATCH 2/6] serial: Add support for UART on VIA VT8500 and compatibles   Greg KH
• [PATCH 2/6] serial: Add support for UART on VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 2/6] serial: Add support for UART on VIA VT8500 and compatibles   Greg KH
• [PATCH 2/6] serial: Add support for UART on VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 2/6] serial: Add support for UART on VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 2/7] arm/versatile: boot-time configure xilinx-pci   Arnd Bergmann
• [PATCH 2/7] ARM: S5PC110: Fix wrong interrupt I2C2 number   Kukjin Kim
• [PATCH 2/7] ARM: S5PC110: Fix wrong interrupt I2C2 number   Marek Szyprowski
• [PATCH 2/7] imx: refactor the io mapping macro   Uwe Kleine-König
• [PATCH 2/7] omap:mailbox: fix rx interrupt disable in omap4   Hari Kanigeri
• [PATCH 2/7] perf: New helper function for pmu name   Matt Fleming
• [PATCH 2/7] perf: New helper function for pmu name   Paul Mundt
• [PATCH 2/7] perf: New helper function for pmu name   Robert Richter
• [PATCH 2/7] perf: New helper function for pmu name   Paul Mundt
• [PATCH 2/7] perf: New helper function for pmu name   Robert Richter
• [PATCH 2/7] perf: New helper function for pmu name   Paul Mundt
• [PATCH 2/7] perf: New helper function for pmu name   Paul Mundt
• [PATCH 2/7] perf: New helper function for pmu name   Robert Richter
• [PATCH 2/7] perf: New helper function for pmu name   Paul Mundt
• [PATCH 2/7] perf: New helper function for pmu name   Robert Richter
• [PATCH 2/7] perf: New helper function for pmu name   Paul Mundt
• [PATCH 2/7] perf: New helper function for pmu name   Robert Richter
• [PATCH 2/7] perf: New helper function for pmu name   Paul Mundt
• [PATCH 2/7] perf: New helper function for pmu name   Matt Fleming
• [PATCH 2/7] perf: New helper function for pmu name   Robert Richter
• [PATCH 2/7] perf: New helper function for pmu name   Peter Zijlstra
• [PATCH 2/7] perf: New helper function for pmu name   Paul Mundt
• [PATCH 2/8] omap2/3: Update revision identification   Tony Lindgren
• [PATCH 2/8] staging: tidspbridge - add kconfig parameter for DMM size   Fernando Guzman Lugo
• [PATCH 2/9 v2] ARM: S3C64XX: add nand support for mach-real6410   Kukjin Kim
• [PATCH 2/9 v2] ARM: S3C64XX: add nand support for mach-real6410   Darius Augulis
• [PATCH 2/9 v2] ARM: S3C64XX: add nand support for mach-real6410   Darius Augulis
• [PATCH 2/9 v2] ARM: S3C64XX: add nand support for mach-real6410   Kukjin Kim
• [PATCH 2/9] ARM: Samsung: Rename s3c64xx I2S platform device   Jassi Brar
• [patch 2/9] efikamx: add mmc support   Arnaud Patard (Rtp)
• [PATCH 20/20 v2] msm: Platform data for msm8x60 IOMMUs   Jeff Ohlstein
• [PATCH 20/27] ARM: S5PV210: 2nd Change to using s3c_gpio_cfgall_range()   Kukjin Kim
• [PATCH 20/47] davinci: add support for aemif timing configuration   Kevin Hilman
• [PATCH 21/27] ARM: SAMSUNG: Add s3c_gpio_cfgrange_nopull() helper   Kukjin Kim
• [PATCH 21/47] nand: davinci: add support for timing configuration   Kevin Hilman
• [PATCH 22/27] ARM: S3C64XX: Change to using s3c_gpio_cfgrange_nopull()   Kukjin Kim
• [PATCH 22/47] davinci: dm644x evm: setup NAND flash timing   Kevin Hilman
• [PATCH 23/27] ARM: S5PC100: Change to using s3c_gpio_cfgrange_nopull()   Kukjin Kim
• [PATCH 23/47] davinci: am17x/da830/omap-l137 evm: setup NAND flash timing   Kevin Hilman
• [PATCH 24/27] ARM: S5PV210: Change to using s3c_gpio_cfgrange_nopull()   Kukjin Kim
• [PATCH 24/47] davinci: am18x/da850/omap-l138 evm: setup NAND flash timing   Kevin Hilman
• [PATCH 25/27] ARM: S3C64XX: 2nd Change to using s3c_gpio_cfgrange_nopull()   Kukjin Kim
• [PATCH 25/47] davinci: dm6467t evm: setup NAND flash timing   Kevin Hilman
• [PATCH 26/27] ARM: S5PC100: 2nd Change to using s3c_gpio_cfgrange_nopull()   Kukjin Kim
• [PATCH 26/47] davinci: Add machine checks to DA8XX serial console init routines   Kevin Hilman
• [PATCH 27/27] ARM: S5PV210: 2nd Change to using s3c_gpio_cfgrange_nopull()   Kukjin Kim
• [PATCH 27/47] davinci: Add CONFIG_REGULATOR_DUMMY to DA8XX defconfig file.   Kevin Hilman
• [PATCH 28/47] davinci: Initial support for MityDSP-L138/MityARM-1808   Kevin Hilman
• [PATCH 29/47] davinci: add idcode for tnetv107x rev 1.1/1.2   Kevin Hilman
• [PATCH 3/10] ARM: S5PC100: Add SCLK_SPDIF clock   Seungwhan Youn
• [PATCH 3/10] ARM: S5PC100: Add SCLK_SPDIF clock   Mark Brown
• [PATCH 3/10] ARM: S5PC100: Add SCLK_SPDIF clock   Kukjin Kim
• [PATCH 3/10] ARM: S5PC100: Add SCLK_SPDIF clock   Seungwhan Youn
• [PATCH 3/10] ARM: S5PC100: Add SCLK_SPDIF clock   Kukjin Kim
• [PATCH 3/3] [ARM] Implement a timer based __delay() loop   Daniel Walker
• [PATCH 3/3] [ARM] Implement a timer based __delay() loop   Stephen Boyd
• [PATCH 3/3] [ARM] Implement a timer based __delay() loop   Daniel Walker
• [PATCH 3/3] Add irqs definition and handler for Mindspeed Comcerto platform   stanleymiao at gmail.com
• [PATCH 3/3] add SDIO support for ST Variants   Linus Walleij
• [PATCH 3/3] ARM: imx: fix/define clocks and create devices for imx dma   Uwe Kleine-König
• [PATCH 3/3] ARM: mx3/cpuimx35: mark otg_pdata and usbh1_pdata as maybe unused   Uwe Kleine-König
• [PATCH 3/3] arm: pcm043: add esdhc-device to boardconfig   Wolfram Sang
• [PATCH 3/3] ARM: S5PC210: add I2C{3, 4, 5, 6, 7} device support   Marek Szyprowski
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Chanwoo Choi
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Mark Brown
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Mark Brown
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Mark Brown
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Mark Brown
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Chanwoo Choi
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Kyungmin Park
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Kyungmin Park
• [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework   Kukjin Kim
• [PATCH 3/3] ARM: S5PV310: Add external interrupt support   Jongsun Han
• [PATCH 3/3] ARM: S5PV310: Add external interrupt support   Marek Szyprowski
• [PATCH 3/3] ARM: S5PV310: Add external interrupt support   Jongsun Han
• [PATCH 3/3] ARM: S5PV310: Add external interrupt support   Russell King - ARM Linux
• [PATCH 3/3] ARM: S5PV310: Add external interrupt support   Kukjin Kim
• [PATCH 3/3] ARM: twd_smp: add clock api support   Rob Herring
• [PATCH 3/3] ARM: twd_smp: add clock api support   Colin Cross
• [PATCH 3/3] ARM: twd_smp: add clock api support   Russell King - ARM Linux
• [PATCH 3/3] ARM: twd_smp: add clock api support   Rob Herring
• [PATCH 3/3] iomux-mx51: fix GPIO_1_xx 's IOMUX configuration   Eric Bénard
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Uwe Kleine-König
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Sascha Hauer
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Fabio Estevam
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Amit Kucheria
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Uwe Kleine-König
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Amit Kucheria
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Amit Kucheria
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Sascha Hauer
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Amit Kucheria
• [PATCH 3/3] mx51: Move OTG initialisation for all boards to a single file   Amit Kucheria
• [PATCH 3/3] omap4: pandaboard: enable the ehci port on pandaboard   David Anders
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Kevin Hilman
• [PATCH 3/3] omap: add hwspinlock device   Grant Likely
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Grant Likely
• [PATCH 3/3] omap: add hwspinlock device   Kevin Hilman
• [PATCH 3/3] omap: add hwspinlock device   Ryan Mallon
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Grant Likely
• [PATCH 3/3] omap: add hwspinlock device   Grant Likely
• [PATCH 3/3] omap: add hwspinlock device   Kevin Hilman
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Kevin Hilman
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Kamoolkar, Mugdha
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Kanigeri, Hari
• [PATCH 3/3] omap: add hwspinlock device   Kamoolkar, Mugdha
• [PATCH 3/3] omap: add hwspinlock device   Kamoolkar, Mugdha
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Tony Lindgren
• [PATCH 3/3] omap: add hwspinlock device   Grant Likely
• [PATCH 3/3] omap: add hwspinlock device   Tony Lindgren
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Tony Lindgren
• [PATCH 3/3] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH 3/3] omap: add hwspinlock device   Tony Lindgren
• [PATCH 3/3] OMAP: UART: use atomic idle notifiers   Kevin Hilman
• [PATCH 3/3] OMAP: UART: use atomic idle notifiers   Govindraj
• [PATCH 3/3] OMAP: UART: use atomic idle notifiers   Kevin Hilman
• [PATCH 3/3] rtc: rtc-s3c: Add rtc_valid_tm in s3c_rtc_gettime()   Kukjin Kim
• [PATCH 3/3] staging: tidspbridge: remove memory consistency from TODO list   Arnd Bergmann
• [PATCH 3/3] staging: tidspbridge: remove memory consistency from TODO list   Felipe Contreras
• [PATCH 3/3] staging: tidspbridge: remove memory consistency from TODO list   Arnd Bergmann
• [PATCH 3/3] staging: tidspbridge: remove memory consistency from TODO list   Felipe Contreras
• [PATCH 3/4 v3] V4L/DVB: s5p-fimc: Do not lock both capture and output buffer queue in s_fmt   Sylwester Nawrocki
• [PATCH 3/4] ARM: ep93xx: add AC97 platform support   Mika Westerberg
• [PATCH 3/4] ARM: ep93xx: add AC97 platform support   Ryan Mallon
• [PATCH 3/4] ARM: ep93xx: add AC97 platform support   Mika Westerberg
• [PATCH 3/4] ARM: mpcore_wdt: Fix WDIOC_SETOPTIONS handling   vkuzmichev at mvista.com
• [PATCH 3/4] ARM: S3C64XX: Add suspend support to SmartQ boards   Maurus Cuelenaere
• [PATCH 3/4] ARM: S5P: Change VMALLOC_END to use more vmalloc()/ioremap() area   Kukjin Kim
• [PATCH 3/4] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCH 3/4] ARM: S5PV210: I2S: Upgrade platform device   Kukjin Kim
• [PATCH 3/4] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCH 3/4] caif-u5500: CAIF shared memory mailbox interface   Sjur Braendeland
• [PATCH 3/4] dmaengine: Add Freescale i.MX SDMA support   Dan Williams
• [PATCH 3/4] i.mx25: add esdhc support   Eric Bénard
• [PATCH 3/4] iomux-mx51: fix SD1 and SD2's iomux configuration   Eric Bénard
• [PATCH 3/4] mx31_3ds: Fix spi registration   Rogerio Pimentel
• [PATCH 3/4] mx31_3ds: Fix spi registration   Uwe Kleine-König
• [PATCH 3/4] omap4: pandaboard: Adding card detect support for MMC1   David Anders
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Sangbeom Kim
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Marek Szyprowski
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Jonghun Han
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Inki Dae
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   han jonghun
• [PATCH 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Ben Dooks
• [PATCH 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Sangbeom Kim
• [PATCH 3/5 v4] V4L/DVB: s5p-fimc: Fix 90/270 deg rotation errors   Sylwester Nawrocki
• [PATCH 3/5] arm/shmobile: remove duplicated include   Nicolas Kaiser
• [PATCH 3/5] arm/shmobile: remove duplicated include   Paul Mundt
• [PATCH 3/5] ARM: S5P64X0: Set DMA clock disable as default   Kukjin Kim
• [PATCH 3/5] AT91: reset routine cleanup   Nicolas Ferre
• [PATCH 3/5] mx27: update defconfig   Eric Bénard
• [PATCH 3/5] mx27: update defconfig   Uwe Kleine-König
• [PATCH 3/5] rtc-pxa: remove unused TIMER_FREQ define   Lennert Buytenhek
• [PATCH 3/5] rtc-pxa: remove unused TIMER_FREQ define   Eric Miao
• [PATCH 3/6 v2] input: Add support for VIA VT8500 and compatibles in i8042   Dmitry Torokhov
• [PATCH 3/6 v2] input: Add support for VIA VT8500 and compatibles in i8042   Alexey Charkov
• [PATCH 3/6] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH 3/6] ARM Realview PCIX map include file changes   Arnd Bergmann
• [PATCH 3/6] arm: plat-tcc: Change mail address of Hans J. Koch   Hans J. Koch
• [PATCH 3/6] input: Add support for VIA VT8500 and compatibles in i8042   Ben Dooks
• [PATCH 3/6] input: Add support for VIA VT8500 and compatibles in i8042   Dmitry Torokhov
• [PATCH 3/6] input: Add support for VIA VT8500 and compatibles in i8042   Alexey Charkov
• [PATCH 3/6] input: Add support for VIA VT8500 and compatibles in i8042   Alexey Charkov
• [PATCH 3/6] mmc: sdhci: introduce private get_ro   Wolfram Sang
• [PATCH 3/6] mmc: sdhci: introduce private get_ro   Wolfram Sang
• [PATCH 3/6] n30: Clean up UARTs configuration   Jiri.Pinkava at vscht.cz
• [PATCH 3/6] rtc: rtc-s3c: Fix on support RTC Alarm   Kukjin Kim
• [PATCH 3/7] arm/versatile: enable PCI I/O space   Arnd Bergmann
• [PATCH 3/7] ARM: oprofile: Rename op_arm to oprofile_perf   Matt Fleming
• [PATCH 3/7] ARM: oprofile: Rename op_arm to oprofile_perf   Robert Richter
• [PATCH 3/7] ARM: Samsung: Use the correct I2C2 interrupt   Kukjin Kim
• [PATCH 3/7] imx: use MXxy_IO_P2V macros to setup static mappings   Uwe Kleine-König
• [PATCH 3/7] imx: use MXxy_IO_P2V macros to setup static mappings   Nguyen Dinh-R00091
• [PATCH 3/7] imx: use MXxy_IO_P2V macros to setup static mappings   Uwe Kleine-König
• [PATCH 3/7] omap:mailbox-fix checkpatch warnings   Hari Kanigeri
• [PATCH 3/7] oprofile: Make op_name_from_perf_id() global   Matt Fleming
• [PATCH 3/8] omap: pandora: add fixed regulator for wlan   Tony Lindgren
• [PATCH 3/8] staging: tidspbridge - change mmufault tasklet to a workqueue   Fernando Guzman Lugo
• [PATCH 3/9] ARM: S3C64XX: add touchscreen support for mach-real6410   Kukjin Kim
• [PATCH 3/9] ARM: S3C64XX: add touchscreen support for mach-real6410   Darius Augulis
• [PATCH 3/9] ARM: S3C64XX: add touchscreen support for mach-real6410   Kukjin Kim
• [PATCH 3/9] ARM: Samsung: Prepare audio header for new I2S driver   Jassi Brar
• [patch 3/9] imx51: enhance/fix iomux configuration   Arnaud Patard (Rtp)
• [patch 3/9] imx51: enhance/fix iomux configuration   Sascha Hauer
• [patch 3/9] imx51: enhance/fix iomux configuration   Arnaud Patard (Rtp)
• [patch 3/9] imx51: enhance/fix iomux configuration   Eric Bénard
• [patch 3/9] imx51: enhance/fix iomux configuration   Eric Bénard
• [patch 3/9] imx51: enhance/fix iomux configuration   Arnaud Patard (Rtp)
• [patch 3/9] imx51: enhance/fix iomux configuration   Arnaud Patard (Rtp)
• [patch 3/9] imx51: enhance/fix iomux configuration   Amit Kucheria
• [patch 3/9] imx51: enhance/fix iomux configuration   Uwe Kleine-König
• [patch 3/9] imx51: enhance/fix iomux configuration   Arnaud Patard (Rtp)
• [patch 3/9] imx51: enhance/fix iomux configuration   Uwe Kleine-König
• [PATCH 30/47] davinci: Add I2C0 devices to MityDSP-L138/MityARM-1808 platform   Kevin Hilman
• [PATCH 31/47] net: davinci_emac: separate out davinci mdio   Kevin Hilman
• [PATCH 32/47] davinci: add mdio platform devices   Kevin Hilman
• [PATCH 33/47] omap: add mdio platform devices   Kevin Hilman
• [PATCH 34/47] net: davinci_emac: switch to new mdio   Kevin Hilman
• [PATCH 35/47] davinci: cleanup mdio arch code and switch to phy_id   Kevin Hilman
• [PATCH 36/47] omap: cleanup unused davinci mdio arch code   Kevin Hilman
• [PATCH 37/47] net: davinci_emac: cleanup unused mdio emac code   Kevin Hilman
• [PATCH 38/47] net: davinci_emac: separate out cpdma code   Kevin Hilman
• [PATCH 39/47] net: davinci_emac: switch to new cpdma layer   Kevin Hilman
• [PATCH 4/10] ARM: S5PV210: Add S/PDIF platform device   Seungwhan Youn
• [PATCH 4/10] ARM: S5PV210: Add S/PDIF platform device   Mark Brown
• [PATCH 4/10] ARM: S5PV210: Add S/PDIF platform device   Kukjin Kim
• [PATCH 4/4 v2] dmaengine: Add Freescale i.MX1/21/27 DMA driver   Sascha Hauer
• [PATCH 4/4 v3] V4L/DVB: s5p-fimc: Add camera capture support   Sylwester Nawrocki
• [PATCH 4/4] ARM: mpcore_wdt: Fix timer mode setup   vkuzmichev at mvista.com
• [PATCH 4/4] ARM: S3C2416: Add support for USB 2.0 High-Speed gadget controller   Sangbeom Kim
• [PATCH 4/4] ARM: S3C64XX: Add wakeup sources to SmartQ boards   Maurus Cuelenaere
• [PATCH 4/4] ARM: S5P: Cleanup the S5P SoCs' VA address mapping   Kukjin Kim
• [PATCH 4/4] ARM: S5PV310: Add audio platform devices   Jassi Brar
• [PATCH 4/4] ARM: S5PV310: Add audio platform devices   Kukjin Kim
• [PATCH 4/4] ARM: S5PV310: Add audio platform devices   Jassi Brar
• [PATCH 4/4] ARM: S5PV310: Add platform data for S5PV310 FIMD and LTE480WV platform-lcd   Sangbeom Kim
• [PATCH 4/4] ARM: S5PV310: Add platform data for S5PV310 FIMD and LTE480WV platform-lcd   Marek Szyprowski
• [PATCH 4/4] ASoC: ep93xx: add Simplemachines Sim.One AC97 audio support   Mika Westerberg
• [PATCH 4/4] caif-u5500: Build config for CAIF shared mem driver   Sjur Braendeland
• [PATCH 4/4] dmaengine: Add Freescale i.MX1/21/27 DMA driver   javier Martin
• [PATCH 4/4] dmaengine: Add Freescale i.MX1/21/27 DMA driver   Sascha Hauer
• [PATCH 4/4] dmaengine: Add Freescale i.MX1/21/27 DMA driver   Linus Walleij
• [PATCH 4/4] dmaengine: Add Freescale i.MX1/21/27 DMA driver   Dan Williams
• [PATCH 4/4] dmaengine: Add Freescale i.MX1/21/27 DMA driver   Sascha Hauer
• [PATCH 4/4] eukrea_mbimxsd for cpuimx25: add CAN & SDCard support   Eric Bénard
• [PATCH 4/4] mx31_3ds: Add SDHC1 support to mx31_3ds   Rogerio Pimentel
• [PATCH 4/4] mx51: add resources for SD/MMC on i.MX51   Eric Bénard
• [PATCH 4/4] omap4: pandaboard: enable the ehci port on pandaboard   David Anders
• [PATCH 4/5 v4] V4L/DVB: s5p-fimc: Do not lock both buffer queues in s_fmt   Sylwester Nawrocki
• [PATCH 4/5] arm/omap: remove duplicated include   Nicolas Kaiser
• [PATCH 4/5] arm/omap: remove duplicated include   Tony Lindgren
• [PATCH 4/5] arm/omap: remove duplicated include   Tony Lindgren
• [PATCH 4/5] ARM: S5P: Reorder DMA platform device id   Kukjin Kim
• [PATCH 4/5] ARM: unify the definition of CLOCK_TICK_RATE across all ARM platforms   Lennert Buytenhek
• [PATCH 4/5] AT91: rename at91sam9g20_reset.S to generalize to several chips   Nicolas Ferre
• [PATCH 4/5] hwmon: DNS323 rev C1 fan support   Simon Guinot
• [PATCH 4/5] mx3: update defconfig   Eric Bénard
• [PATCH 4/6] ARM Realview PCIX IRQ include file changes   Colin Tuckley
• [PATCH 4/6] mmc: sdhci_pltfm: pass more data on custom init-call   Wolfram Sang
• [PATCH 4/6] mmc: sdhci_pltfm: pass more data on custom init-call   Wolfram Sang
• [PATCH 4/6] mmc: sdhci_pltfm: pass more data on custom init-call   Wolfram Sang
• [PATCH 4/6] n30: Fix MMC power management   Jiří Pinkava
• [PATCH 4/6] n30: Fix MMC power management on Acer n30 / n35   Jiri.Pinkava at vscht.cz
• [PATCH 4/6] rtc: rtc-s3c: Fix debug message format on RTC   Kukjin Kim
• [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD   Greg KH
• [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD   Alexey Charkov
• [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD   Greg KH
• [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD   Alexey Charkov
• [PATCH 4/6] usb: Add support for VIA VT8500 and compatibles in EHCI HCD   Alexey Charkov
• [PATCH 4/7] arm/versatile: use correct PCI IRQ swizzling   Arnd Bergmann
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Robert Richter
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Paul Mundt
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Robert Richter
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Paul Mundt
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Robert Richter
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Paul Mundt
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Grant Likely
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Robert Richter
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Paul Mundt
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Grant Likely
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Robert Richter
• [PATCH 4/7] ARM: oprofile: Move non-ARM code into separate init/exit   Matt Fleming
• [PATCH 4/7] ARM: oprofile: Rename op_arm to oprofile_perf   Matt Fleming
• [PATCH 4/7] ARM: S5PC210: I2C1/2 support   Kukjin Kim
• [PATCH 4/7] imx: remove last explicit users of virtual base address defines   Uwe Kleine-König
• [PATCH 4/7] omap:mailbox-send message in process context   Hari Kanigeri
• [PATCH 4/7] omap:mailbox-send message in process context   Sapiens, Rene
• [PATCH 4/7] omap:mailbox-send message in process context   Hari Kanigeri
• [PATCH 4/7] omap:mailbox-send message in process context   Sapiens, Rene
• [PATCH 4/8] omap: pandora: enable twl4030 charger   Tony Lindgren
• [PATCH 4/8] staging: tidspbridge - fix timeout in dsp_gpt_wait_overflow   Fernando Guzman Lugo
• [PATCH 4/9] ARM: S3C64XX: add USB host support for mach-real6410   Kukjin Kim
• [PATCH 4/9] ARM: S3C64XX: add USB host support for mach-real6410   Darius Augulis
• [PATCH 4/9] ARM: S3C64XX: add USB host support for mach-real6410   Kukjin Kim
• [PATCH 4/9] ARM: S3C64XX: add USB host support for mach-real6410   Darius Augulis
• [PATCH 4/9] ARM: S3C64XX: I2S: Upgrade platform device   Jassi Brar
• [PATCH 4/9] drivers/rtc: typo fix of faild to failed   Joe Perches
• [PATCH 4/9] drivers/rtc: typo fix of faild to failed   Wan ZongShun
• [patch 4/9] imx51: add gpio mode for csi1 {h,v}sync   Arnaud Patard (Rtp)
• [PATCH 40/47] net: davinci_emac: cleanup unused cpdma code   Kevin Hilman
• [PATCH 41/47] input: add driver for tnetv107x on-chip keypad controller   Kevin Hilman
• [PATCH 42/47] davinci: add tnetv107x keypad platform device   Kevin Hilman
• [PATCH 43/47] davinci: add keypad config for tnetv107x evm board   Kevin Hilman
• [PATCH 43/74] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Vipin Kumar
• [PATCH 44/47] input: add driver for tnetv107x touchscreen controller   Kevin Hilman
• [PATCH 45/47] davinci: add tnetv107x touchscreen platform device   Kevin Hilman
• [PATCH 46/47] davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom   Kevin Hilman
• [PATCH 47/47] davinci: Initial support for Omapl138-Hawkboard   Kevin Hilman
• [PATCH 5/10] ARM: S5PV210: Add SCLK_SPDIF clock   Seungwhan Youn
• [PATCH 5/10] ARM: S5PV210: Add SCLK_SPDIF clock   Mark Brown
• [PATCH 5/10] ARM: S5PV210: Add SCLK_SPDIF clock   Kukjin Kim
• [PATCH 5/10] ARM: S5PV210: Add SCLK_SPDIF clock   Seungwhan Youn
• [PATCH 5/5 v4] V4L/DVB: s5p-fimc: Add camera capture support   Sylwester Nawrocki
• [PATCH 5/5] arm/davinci: remove duplicated include   Nicolas Kaiser
• [PATCH 5/5] arm/davinci: remove duplicated include   Kevin Hilman
• [PATCH 5/5] ARM: remove per-platform timex.h include files   Lennert Buytenhek
• [PATCH 5/5] ARM: remove per-platform timex.h include files   Uwe Kleine-König
• [PATCH 5/5] ARM: remove per-platform timex.h include files   Lennert Buytenhek
• [PATCH 5/5] ARM: remove per-platform timex.h include files   Nicolas Pitre
• [PATCH 5/5] ARM: remove per-platform timex.h include files   H Hartley Sweeten
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Kukjin Kim
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Kyungmin Park
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Jassi Brar
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Kyungmin Park
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Jassi Brar
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Kyungmin Park
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Jassi Brar
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Kukjin Kim
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Kukjin Kim
• [PATCH 5/5] ARM: SAMSUNG: Add to enable/disable clock on S3C PL330   Kyungmin Park
• [PATCH 5/5] AT91: reset: extend alternate reset procedure to several chips   Nicolas Ferre
• [PATCH 5/5] mx51: update defconfig   Eric Bénard
• [PATCH 5/6] ARM Realview PCIX board file changes   Colin Tuckley
• [PATCH 5/6] ARM: Samsung: Add common samsung_gpiolib_to_irq function   Kukjin Kim
• [PATCH 5/6] ARM: Samsung: Add common samsung_gpiolib_to_irq function   Marek Szyprowski
• [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Wolfram Sang
• [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Wolfram Sang
• [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Chris Ball
• [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Wolfram Sang
• [PATCH 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Chris Ball
• [PATCH 5/6] n30: Add touchscreen support for Ace n35   Jiří Pinkava
• [PATCH 5/6] n30: Add touchscreen support for Acer n30 / n35   Jiri.Pinkava at vscht.cz
• [PATCH 5/6] rtc: Add support for the RTC in VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 5/6] rtc: rtc-s3c: Fix on RTC initialization method   Kukjin Kim
• [PATCH 5/7] arm/realview: fix building PB-A8 and PBX with CONFIG_PCI   Arnd Bergmann
• [PATCH 5/7] ARM: oprofile: Move non-ARM code into separate init/exit   Robert Richter
• [PATCH 5/7] ARM: oprofile: Move non-ARM code into separate init/exit   Robert Richter
• [PATCH 5/7] ARM: oprofile: Move non-ARM code into separate init/exit   Matt Fleming
• [PATCH 5/7] ARM: oprofile: Move non-ARM code into separate init/exit   Matt Fleming
• [PATCH 5/7] ARM: S5PC210: I2C0/1 devices support on Universal board   Kyungmin Park
• [PATCH 5/7] ARM: S5PC210: I2C0/1 devices support on Universal board   Kukjin Kim
• [PATCH 5/7] omap:mailbox-resolve multiple receiver problem   Hari Kanigeri
• [PATCH 5/7] omap:mailbox-resolve multiple receiver problem   Omar Ramirez Luna
• [PATCH 5/7] omap:mailbox-resolve multiple receiver problem   Hari Kanigeri
• [PATCH 5/7] oprofile: Abstract the perf-events backend   Matt Fleming
• [PATCH 5/7] oprofile: Abstract the perf-events backend   Robert Richter
• [PATCH 5/7] RFC/RFT: imx: change static io mapping to use a function   Uwe Kleine-König
• [PATCH 5/8] OMAP4 ES2: HSMMC soft reset change   Tony Lindgren
• [PATCH 5/8] staging: tidspbridge - use GTP7 for DSP stack dump   Fernando Guzman Lugo
• [PATCH 5/9 v2] ARM: S3C64XX: add support for mach-mini6410   Kukjin Kim
• [PATCH 5/9] ARM: S5P64X0: I2S: Upgrade platform device   Jassi Brar
• [patch 5/9] efikamx: add leds support   Arnaud Patard (Rtp)
• [patch 5/9] efikamx: add leds support   Amit Kucheria
• [PATCH 6/10] ARM: S5PV210: Add audio clocks as sysclk   Seungwhan Youn
• [PATCH 6/10] ARM: S5PV210: Add audio clocks as sysclk   Mark Brown
• [PATCH 6/10] ARM: S5PV210: Add audio clocks as sysclk   Kukjin Kim
• [PATCH 6/6] ARM Realview PCIX build file changes   Colin Tuckley
• [PATCH 6/6] ARM Realview PCIX build file changes   Arnd Bergmann
• [PATCH 6/6] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 6/6] ARM: l2x0: Optimise the range based operations   Russell King - ARM Linux
• [PATCH 6/6] ARM: l2x0: Optimise the range based operations   Shilimkar, Santosh
• [PATCH 6/6] ARM: l2x0: Optimise the range based operations   Shilimkar, Santosh
• [PATCH 6/6] mmc: sdhci-pltfm: add pltfm-driver for imx35/51   Wolfram Sang
• [PATCH 6/6] mmc: sdhci-pltfm: add pltfm-driver for imx35/51   Chris Ball
• [PATCH 6/6] mmc: sdhci-pltfm: add pltfm-driver for imx35/51   Wolfram Sang
• [PATCH 6/6] n35: Add LCD backlight regulation   Jiří Pinkava
• [PATCH 6/6] n35: Add LCD backlight regulation on Acer n35   Jiri.Pinkava at vscht.cz
• [PATCH 6/6] rtc: rtc-s3c: Add rtc_valid_tm in s3c_rtc_gettime()   Kukjin Kim
• [PATCH 6/7] arm/realview: enable PCI for realview-eb and realview-pb1176   Arnd Bergmann
• [PATCH 6/7] ARM: S5PC210: Define the more I2C{3, 4, 5, 6, 7} address & interrupt   Kukjin Kim
• [PATCH 6/7] imx/debug-macro: rework using the new io mapping macro   Uwe Kleine-König
• [PATCH 6/7] imx/debug-macro: rework using the new io mapping macro   Uwe Kleine-König
• [PATCH 6/7] omap:mailbox-add notification support for multiple readers   Omar Ramirez Luna
• [PATCH 6/7] omap:mailbox-add notification support for multiple readers   Hari Kanigeri
• [PATCH 6/7] omap:mailbox-add notification support for multiple readers   Hari Kanigeri
• [PATCH 6/7] oprofile: Abstract the perf-events backend   Matt Fleming
• [PATCH 6/7] sh: oprofile: Use perf-events oprofile backend   Matt Fleming
• [PATCH 6/7] sh: oprofile: Use perf-events oprofile backend   Paul Mundt
• [PATCH 6/7] sh: oprofile: Use perf-events oprofile backend   Robert Richter
• [PATCH 6/7] sh: oprofile: Use perf-events oprofile backend   Matt Fleming
• [PATCH 6/7] sh: oprofile: Use perf-events oprofile backend   Paul Mundt
• [PATCH 6/8] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set   Tony Lindgren
• [PATCH 6/8] staging: tidspbridge - remove disabling twl when printing DSP stack   Fernando Guzman Lugo
• [PATCH 6/9] ARM: S5P6442: I2S: Upgrade platform device   Jassi Brar
• [patch 6/9] efikamx: add support for power key   Arnaud Patard (Rtp)
• [PATCH 7/10] ARM: S5PV210: Fix wrong EPLL rate getting on setup clocks   Kukjin Kim
• [PATCH 7/10] ARM: S5PV210: Fix wrong EPLL rate getting on setup clocks   Seungwhan Youn
• [PATCH 7/10] ARM: S5PV210: Fix wrong EPLL rate getting on setup clocks   Seungwhan Youn
• [PATCH 7/6] spi/imx: Support different fifo sizes   Uwe Kleine-König
• [PATCH 7/6] spi/imx: Support different fifo sizes   Grant Likely
• [PATCH 7/7] arm: Enable support for virtio   Arnd Bergmann
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Marek Szyprowski
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Jassi Brar
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kyungmin Park
• [PATCH 7/7] ARM: S5PC210: I2C{3, 4, 5, 6, 7} device support   Kukjin Kim
• [PATCH 7/7] imx: remove deprecated symbols as all users are gone now   Uwe Kleine-König
• [PATCH 7/7] omap:clocks44x-add dummy clock for mailbox   Hari Kanigeri
• [PATCH 7/7] sh: Annotate oprofile_arch_exit() with __exit marker   Matt Fleming
• [PATCH 7/7] sh: Annotate oprofile_arch_exit() with __exit marker   Paul Mundt
• [PATCH 7/7] sh: Annotate oprofile_arch_exit() with __exit marker   Robert Richter
• [PATCH 7/7] sh: oprofile: Use perf-events oprofile backend   Matt Fleming
• [PATCH 7/7] sh: oprofile: Use perf-events oprofile backend   Robert Richter
• [PATCH 7/7] sh: oprofile: Use perf-events oprofile backend   Paul Mundt
• [PATCH 7/8] omap4 hsmmc: Register offset handling   Tony Lindgren
• [PATCH 7/8] staging: tidspbridge - fix some issues after iommu patches   Fernando Guzman Lugo
• [PATCH 7/9] ARM: S5PC100: I2S: Upgrade platform device   Jassi Brar
• [patch 7/9] imx51: fix gpio_4_24 and gpio_4_25 pad configuration   Arnaud Patard (Rtp)
• [PATCH 8/10] ARM: S5PV210: Add EPLL clock operations   Seungwhan Youn
• [PATCH 8/10] ARM: S5PV210: Add EPLL clock operations   Kukjin Kim
• [PATCH 8/10] ARM: S5PV210: Add EPLL clock operations   Seungwhan Youn
• [PATCH 8/8] omap4 hsmmc: Update ocr mask for MMC2 for regulator to use   Tony Lindgren
• [PATCH 8/8] staging: tidspbridge - make sync_wait_on_event interruptible   Fernando Guzman Lugo
• [PATCH 8/8] staging: tidspbridge - make sync_wait_on_event interruptible   Felipe Contreras
• [PATCH 8/8] staging: tidspbridge - make sync_wait_on_event interruptible   Guzman Lugo, Fernando
• [PATCH 8/8] staging: tidspbridge - make sync_wait_on_event interruptible   Felipe Contreras
• [PATCH 8/8] staging: tidspbridge - make sync_wait_on_event interruptible   Guzman Lugo, Fernando
• [PATCH 8/8] staging: tidspbridge - make sync_wait_on_event interruptible   Felipe Contreras
• [PATCH 8/8] staging: tidspbridge - make sync_wait_on_event interruptible   Guzman Lugo, Fernando
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Kyungmin Park
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Mark Brown
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Kukjin Kim
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Mark Brown
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Mark Brown
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Liam Girdwood
• [patch 8/9] efikamx: add spi nor support   Arnaud Patard (Rtp)
• [patch 8/9] efikamx: add spi nor support   Amit Kucheria
• [patch 8/9] efikamx: add spi nor support   Arnaud Patard (Rtp)
• [patch 8/9] efikamx: add spi nor support   Amit Kucheria
• [patch 8/9] efikamx: add spi nor support   Matt Sealey
• [patch 8/9] efikamx: add spi nor support   Arnaud Patard (Rtp)
• [patch 8/9] efikamx: add spi nor support   Matt Sealey
• [PATCH 9/10] ASoC: SAMSUNG: Add S/PDIF CPU driver   Seungwhan Youn
• [PATCH 9/10] ASoC: SAMSUNG: Add S/PDIF CPU driver   Mark Brown
• [PATCH 9/10] ASoC: SAMSUNG: Add S/PDIF CPU driver   Seungwhan Youn
• [PATCH 9/9] arch: arm: fixed typos   Andrea Gelmini
• [PATCH 9/9] arch: arm: fixed typos   Uwe Kleine-König
• [PATCH 9/9] arch: arm: fixed typos   Andrea Gelmini
• [PATCH 9/9] arch: arm: fixed typos   Baruch Siach
• [PATCH 9/9] arch: arm: fixed typos   Jiri Kosina
• [PATCH 9/9] arch: arm: fixed typos   Andrea Gelmini
• [PATCH 9/9] arch: arm: fixed typos   Uwe Kleine-König
• [PATCH 9/9] ARM: S5PV310: Add audio platform devices   Jassi Brar
• [PATCH 9/9] ARM: S5PV310: Add audio platform devices   Kyungmin Park
• [PATCH 9/9] ARM: S5PV310: Add audio platform devices   Jassi Brar
• [PATCH 9/9] ARM: S5PV310: Add audio platform devices   Kyungmin Park
• [PATCH 9/9] ARM: S5PV310: Add audio platform devices   Jassi Brar
• [patch 9/9] efikamx: add reset   Arnaud Patard (Rtp)
• [patch 9/9] efikamx: add reset   Fabio Estevam
• [patch 9/9] efikamx: add reset   Arnaud Patard (Rtp)
• [PATCH for 2.6.36 1/2] cpuimx27: fix compile when ULPI is selected   Eric Bénard
• [PATCH for 2.6.36 1/2] cpuimx27: fix compile when ULPI is selected   Uwe Kleine-König
• [PATCH for 2.6.36 2/2] cpuimx27: fix i2c bus selection   Eric Bénard
• [PATCH for 2.6.36 2/2] cpuimx27: fix i2c bus selection   Uwe Kleine-König
• [PATCH for 2.6.36 2/2] cpuimx27: fix i2c bus selection   Eric Bénard
• [PATCH for 2.6.36 2/2] cpuimx27: fix i2c bus selection   Uwe Kleine-König
• [PATCH for 2.6.36 2/2] cpuimx27: fix i2c bus selection   Eric Bénard
• [PATCH for 2.6.36 2/2] cpuimx27: fix i2c bus selection   Uwe Kleine-König
• [PATCH RE-SEND 0/6] rtc: rtc-s3c: Fix rtc-s3c   Kukjin Kim
• [PATCH RESEND 1/2] sdhci-s3c: Add support additional host capabilities   Kukjin Kim
• [PATCH RESEND 2/2] ARM: s3c2440: fix boot failure introduced by recent changes in gpiolib   Abdoulaye Walsimou Gaye
• [PATCH RESEND V3 1/1] ARM: s3c2440: various fixes in Kconfig file   Abdoulaye Walsimou Gaye
• [PATCH RESEND] ARM: fix spinlock recursion in adjust_pte()   Mika Westerberg
• [PATCH RESEND] ARM: fix spinlock recursion in adjust_pte()   Baruch Siach
• [PATCH RESEND] ARM: fix spinlock recursion in adjust_pte()   Mika Westerberg
• [PATCH RESEND] ARM: fix spinlock recursion in adjust_pte()   Baruch Siach
• [PATCH RESEND] ARM: fix spinlock recursion in adjust_pte()   Mika Westerberg
• [PATCH RESEND] ARM: fix spinlock recursion in adjust_pte()   Baruch Siach
• [PATCH RESEND] ARM: S5PC110: GONI: Add support for QT602240 TS driver   Kukjin Kim
• [PATCH RESEND] ARM: S5PC110: GONI: Add support for QT602240 TS driver   Marek Szyprowski
• [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure   Paulius Zaleckas
• [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure   Kukjin Kim
• [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure   Paulius Zaleckas
• [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure   Kukjin Kim
• [PATCH RFC/RFT] ARM: S5P: Fix USB and 48M clock enable procedure   Paulius Zaleckas
• [PATCH RFC] arm: genirq: fix boot on arm platforms   Anand Gadiyar
• [PATCH RFC] arm: genirq: fix boot on arm platforms   Linus Walleij
• [PATCH RFC] arm: genirq: fix boot on arm platforms   Thomas Gleixner
• [PATCH RFC] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie   Uwe Kleine-König
• [PATCH RFC] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie   Lothar Waßmann
• [PATCH RFC] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie   Sascha Hauer
• [PATCH RFC] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie   =?utf-8?q?Lothar=20Wa=DFmann?=
• [PATCH RFC] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie   =?utf-8?q?Lothar=20Wa=DFmann?=
• [PATCH v2 0/2] add support for the Marvell Dove SDHCI controller   Mike Rapoport
• [PATCH V2 0/2] ARM: S5PV310: Add support GPIOlib   Sangbeom Kim
• [PATCH v2 0/2] Dove: add support for MPP configuration   Mike Rapoport
• [PATCH v2 0/3] ARM: add clock api to sp804 and smp_twd timers   Rob Herring
• [PATCH V2 0/3] ARM: S5PV310: Add EINT support   Jongsun Han
• [PATCH V2 0/3] ARM: S5PV310: Add support HSMMC   Jeongbae Seo
• [PATCH v2 0/4] tidspbridge: SCM layer violation fixes   Omar Ramirez Luna
• [PATCH v2 0/4] tidspbridge: SCM layer violation fixes   Felipe Contreras
• [PATCH v2 0/4] tidspbridge: SCM layer violation fixes   Omar Ramirez Luna
• [PATCH v2 0/6] Add S/PDIF common driver for Samsung SoCs   Seungwhan Youn
• [PATCH v2 0/6] ARM: S5PV210: Add support S5PV210/S5PC110 CPUFREQ   Sangbeom Kim
• [PATCH v2 0/6] ARM: S5PV210: Add support S5PV210/S5PC110 CPUFREQ   Kukjin Kim
• [PATCH v2 0/6] ARM: S5PV210: Add support S5PV210/S5PC110 CPUFREQ   MyungJoo Ham
• [PATCH v2 0/6] ARM: S5PV210: Add support S5PV210/S5PC110 CPUFREQ   Sangbeom Kim
• [PATCH v2 0/6] ARM: S5PV210: Add support S5PV210/S5PC110 CPUFREQ   MyungJoo Ham
• [PATCH v2 0/6] ARM: S5PV210: Add support S5PV210/S5PC110 CPUFREQ   Kukjin Kim
• [PATCH v2 0/6] ARM: S5PV210: Add support S5PV210/S5PC110 CPUFREQ   MyungJoo Ham
• [patch v2 00/10] efikamx support improvements - try 2   Arnaud Patard (Rtp)
• [patch v2 00/10] efikamx support improvements - try 2   Amit Kucheria
• [patch v2 00/10] efikamx support improvements - try 2   Arnaud Patard (Rtp)
• [PATCH V2 00/69] Updating SPEAr Support   Viresh KUMAR
• [PATCH V2 00/69] Updating SPEAr Support   viresh kumar
• [PATCH V2 00/69] Updating SPEAr Support   viresh kumar
• [patch v2 01/10] efikamx: read board id   Arnaud Patard (Rtp)
• [PATCH v2 01/10] OMAP: mach-omap2: Fix incorrect assignment warnings   Kevin Hilman
• [PATCH v2 01/10] OMAP: mach-omap2: Fix incorrect assignment warnings   G, Manjunath Kondaiah
• [PATCH V2 01/69] ARM: move sev definition to common system.h include file   Viresh KUMAR
• [patch v2 02/10] imx51: fix iomux configuration   Arnaud Patard (Rtp)
• [PATCH V2 02/69] sp810 Fix: Switch to slow mode before sysctl_soft_reset   Viresh KUMAR
• [patch v2 03/10] imx51: enhance iomux configuration for esdhc support   Arnaud Patard (Rtp)
• [PATCH V2 03/69] ST SPEAr: Padmux code Updated   Viresh KUMAR
• [patch v2 04/10] efikamx: add mmc support   Arnaud Patard (Rtp)
• [PATCH v2 04/22] arm: introduce little-endian bitops   Akinobu Mita
• [PATCH V2 04/69] ST SPEAr: Making clock functions more generic   Viresh KUMAR
• [patch v2 05/10] imx51: add gpio mode for csi1 {h,v}sync   Arnaud Patard (Rtp)
• [PATCH V2 05/69] ST SPEAr: Formalized timer support   Viresh KUMAR
• [patch v2 06/10] efikamx: add leds support   Arnaud Patard (Rtp)
• [PATCH V2 06/69] ST SPEAr13XX: Adding machine specific header files   Viresh KUMAR
• [patch v2 07/10] efikamx: add support for power key   Arnaud Patard (Rtp)
• [patch v2 07/10] efikamx: add support for power key   Fabio Estevam
• [patch v2 07/10] efikamx: add support for power key   Arnaud Patard (Rtp)
• [patch v2 07/10] efikamx: add support for power key   Arnaud Patard (Rtp)
• [PATCH V2 07/69] ST SPEAr13XX: Adding machine specific src files   Viresh KUMAR
• [patch v2 08/10] imx51: fix gpio_4_24 and gpio_4_25 pad configuration   Arnaud Patard (Rtp)
• [PATCH V2 08/69] ST SPEAr: Adding support for SPEAr13xx SoC in spear generic plat/   Viresh KUMAR
• [patch v2 09/10] efikamx: add spi nor support   Arnaud Patard (Rtp)
• [PATCH v2 09/10] OMAP2/3: Convert write/read functions to raw read/write   Menon, Nishanth
• [PATCH v2 09/10] OMAP2/3: Convert write/read functions to raw read/write   Vimal Singh
• [PATCH v2 09/10] OMAP2/3: Convert write/read functions to raw read/write   Russell King - ARM Linux
• [PATCH v2 09/10] OMAP2/3: Convert write/read functions to raw read/write   Nishanth Menon
• [PATCH v2 09/10] OMAP2/3: Convert write/read functions to raw read/write   David Woodhouse
• [PATCH v2 09/10] OMAP2/3: Convert write/read functions to raw read/write   G, Manjunath Kondaiah
• [PATCH v2 09/10] OMAP2/3: Convert write/read functions to raw read/write   Artem Bityutskiy
• [PATCH v2 09/10] OMAP2/3: Convert write/read functions to raw read/write   David Woodhouse
• [PATCH V2 09/69] ST SPEAr13XX: Added compilation support in arch/arm/   Viresh KUMAR
• [PATCH v2 1/1] mx35pdk: add debug board support   jgq516 at gmail.com
• [PATCH v2 1/1] mx35pdk: add debug board support   Baruch Siach
• [PATCH v2 1/1] mx35pdk: add debug board support   Fabio Estevam
• [PATCH v2 1/1] mx35pdk: add debug board support   Fabio Estevam
• [PATCH v2 1/1] mx35pdk: add debug board support   xiao jiang
• [PATCH v2 1/1] mx35pdk: add debug board support   xiao jiang
• [PATCH v2 1/1] mx35pdk: add debug board support   Baruch Siach
• [PATCH v2 1/1] mx35pdk: add debug board support   xiao jiang
• [PATCH v2 1/1] mx35pdk: add debug board support   Jason Wang
• [PATCH v2 1/2] [ARM] Dove: add support for GPIOs 64-71   Mike Rapoport
• [PATCH v2 1/2] [ARM] Kirkwood: enhance TCLK detection   Simon Guinot
• [PATCH v2 1/2] [ARM] Kirkwood: enhance TCLK detection   Simon Guinot
• [PATCH v2 1/2] [ARM] Kirkwood: enhance TCLK detection   Lennert Buytenhek
• [PATCH V2 1/2] ARM: S5P: Add initial map for GPIO2 and GPIO3   Sangbeom Kim
• [PATCH V2 1/2] ARM: S5P: Add initial map for GPIO2 and GPIO3   Kukjin Kim
• [PATCH V2 1/2] ARM: S5P: Add initial map for GPIO2 and GPIO3   Kyungmin Park
• [PATCH V2 1/2] ARM: S5P: Add initial map for GPIO2 and GPIO3   Kukjin Kim
• [PATCH v2 1/2] ARM: S5PV210: Add i2c information to Goni and Aquila board   Kukjin Kim
• [PATCH v2 1/2] ARM: S5PV210: Add i2c information to Goni and Aquila board   Kukjin Kim
• [PATCH v2 1/2] ARM: S5PV210: Add i2c information to Goni and Aquila board   Chanwoo Choi
• [PATCH v2 1/2] MMC: add support for the Marvell Dove SDHCI controller   Mike Rapoport
• [PATCH v2 1/2] MMC: add support for the Marvell Dove SDHCI controller   Chris Ball
• [PATCH v2 1/2] MMC: add support for the Marvell Dove SDHCI controller   Saeed Bishara
• [PATCH v2 1/2] MMC: add support for the Marvell Dove SDHCI controller   Haojian Zhuang
• [PATCH v2 1/2] MMC: add support for the Marvell Dove SDHCI controller   Mike Rapoport
• [PATCH v2 1/2] regulator: add support for regulators on the ab8500 MFD   Thiago Farina
• [PATCH v2 1/2] regulator: add support for regulators on the ab8500 MFD   Mark Brown
• [PATCH v2 1/2] regulator: add support for regulators on the ab8500 MFD   Thiago Farina
• [PATCH v2 1/2] regulator: add support for regulators on the ab8500 MFD   Mark Brown
• [PATCH v2 1/2] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Eric Bénard
• [PATCH v2 1/3] ARM: move timer-sp.c from versatile to common   Rob Herring
• [PATCH v2 1/3] ARM: mx3: use MX3x_ prefixed version of CHIP_REV_x   Uwe Kleine-König
• [PATCH V2 1/3] ARM: S5PV310: Add support HSMMC and SDHCI configuration   Kukjin Kim
• [PATCH V2 1/3] ARM: S5PV310: Add support HSMMC and SDHCI configuration   Jeongbae Seo
• [PATCH V2 1/3] ARM: S5PV310: Add support HSMMC and SDHCI configuration   Jeongbae Seo
• [PATCH v2 1/3] imx-esdhc: update devices registration   Eric Bénard
• [PATCH v2 1/3] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON   Kukjin Kim
• [PATCH v2 1/4] ARM: S3C24XX: Fix gpiolib support for ports K..M   Kukjin Kim
• [PATCH V2 1/4] ARM: SAMSUNG: Move the start address of Samsung SoCs' VA space   Kukjin Kim
• [PATCH v2 1/4] OMAP: control: add functions for DSP boot address/mode control   Omar Ramirez Luna
• [PATCH v2 1/5] mach-pcm037_eet: fix compile errors   Eric Bénard
• [PATCH v2 1/6] ARM: S5P: Reduce duplicated EPLL control codes   Seungwhan Youn
• [PATCH v2 1/6] ARM: S5P: Reduce duplicated EPLL control codes   Kukjin Kim
• [PATCH v2 1/6] ARM: S5P: Reduce duplicated EPLL control codes   Seungwhan Youn
• [patch v2 10/10] efikamx: add reset   Arnaud Patard (Rtp)
• [PATCH V2 10/69] ST SPEAr1300: Adding default config file   Viresh KUMAR
• [PATCH V2 11/69] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx   Viresh KUMAR
• [PATCH V2 12/69] ST SPEAr: Updating Clock Support   Viresh KUMAR
• [PATCH V2 13/69] ST SPEAr: Adding Debugfs support on clock framework   Viresh KUMAR
• [PATCH V2 14/69] ST SPEAr: Correcting SOC Config base address for spear320   Viresh KUMAR
• [PATCH V2 15/69] ST SPEAr: Adding PLGPIO driver for spear platform   Viresh KUMAR
• [PATCH V2 16/69] rtc: Adding support for spear rtc   Viresh KUMAR
• [PATCH V2 16/69] rtc: Adding support for spear rtc   Alessandro Zummo
• [PATCH V2 16/69] rtc: Adding support for spear rtc   viresh kumar
• [PATCH V2 17/69] ST SPEAr: Adding machine support for rtc-spear   Viresh KUMAR
• [PATCH V2 18/69] ST SPEAr: adding support for synopsis i2c designware   Viresh KUMAR
• [PATCH V2 19/69] USB host: Adding USB ehci & ohci support for spear platform   viresh kumar
• [PATCH V2 19/69] USB host: Adding USB ehci & ohci support for spear platform   Viresh KUMAR
• [PATCH v2 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Mike Rapoport
• [PATCH v2 2/2] [ARM] Dove: rename SDCHI devices to "sdhci-dove"   Mike Rapoport
• [PATCH v2 2/2] [ARM] Kirkwood: fix timer initialization for LaCie boards   Simon Guinot
• [PATCH v2 2/2] ARM: S5PV210: Add init code of audio to Goni and Auqila board   Kukjin Kim
• [PATCH v2 2/2] ARM: S5PV210: Add init code of audio to Goni and Auqila board   Chanwoo Choi
• [PATCH V2 2/2] ARM: S5PV310: Add support GPIOlib   Sangbeom Kim
• [PATCH V2 2/2] ARM: S5PV310: Add support GPIOlib   Kukjin Kim
• [PATCH V2 2/2] ARM: S5PV310: Add support GPIOlib   Jongsun Han
• [PATCH V2 2/2] ARM: S5PV310: Add support GPIOlib   Kukjin Kim
• [PATCH v2 2/2] sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35   Wolfram Sang
• [PATCH v2 2/2] sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35   Eric Bénard
• [PATCH v2 2/3] ARM: mx35: Add mx35_revision function to query the silicon revision   Uwe Kleine-König
• [PATCH V2 2/3] ARM: S5PV310: Add HSMMC platform data   Jeongbae Seo
• [PATCH V2 2/3] ARM: S5PV310: Add HSMMC platform data   Jassi Brar
• [PATCH v2 2/3] ARM: timer-sp: support timer clock freq other than 1MHz   Rob Herring
• [PATCH v2 2/3] rtc: rtc-s3c: Fix on RTC initialization method   Kukjin Kim
• [PATCH v2 2/4] ARM: S3C2416: Set name of the framebuffer device only if it present   Kukjin Kim
• [PATCH V2 2/4] ARM: S3C: Change VMALLOC_END to use more vmalloc()/ioremap() area   Kukjin Kim
• [PATCH v2 2/4] ARM: S5PV310: Add platform device and helper functions for FIMD   Sangbeom Kim
• [PATCH v2 2/4] OMAP3: PM: update DSP reset code to use new SCM DSP boot control functions   Omar Ramirez Luna
• [PATCH v2 2/5] mx25: add defconfig   Eric Bénard
• [PATCH v2 2/5] mx25: add defconfig   Baruch Siach
• [PATCH v2 2/6] ARM: S5PV210: Fix wrong EPLL rate getting on setup clocks   Seungwhan Youn
• [PATCH v2 2/6] ARM: S5PV210: Fix wrong EPLL rate getting on setup clocks   Seungwhan Youn
• [PATCH v2 2/6] ARM: S5PV210: Fix wrong EPLL rate getting on setup clocks   Kukjin Kim
• [PATCH V2 20/69] ST SPEAr: Adding machine support for USB host   Viresh KUMAR
• [PATCH V2 21/69] Keyboard: Adding support for spear-keyboard   Viresh KUMAR
• [PATCH V2 21/69] Keyboard: Adding support for spear-keyboard   Dmitry Torokhov
• [PATCH V2 21/69] Keyboard: Adding support for spear-keyboard   viresh kumar
• [PATCH V2 21/69] Keyboard: Adding support for spear-keyboard   Dmitry Torokhov
• [PATCH V2 21/69] Keyboard: Adding support for spear-keyboard   viresh kumar
• [PATCH V2 22/69] ST SPEAr: Adding machine support for keyboard   Viresh KUMAR
• [PATCH V2 23/69] ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified resource size   Viresh KUMAR
• [PATCH V2 24/69] ST SPEAr: Adding support for ST's PWM IP   Viresh KUMAR
• [PATCH V2 25/69] ST SPEAr: Add smi driver for serial NOR flash   Viresh KUMAR
• [PATCH V2 25/69] ST SPEAr: Add smi driver for serial NOR flash   viresh kumar
• [PATCH V2 26/69] ST SPEAr: Adding support for serial nor flash in all spear platforms   Viresh KUMAR
• [PATCH V2 27/69] ST SPEAr: Adding Watchdog support   Viresh KUMAR
• [PATCH V2 28/69] ST SPEAr: Adding machine support for nand   Viresh KUMAR
• [PATCH V2 29/69] Newly erased page read workaround   Viresh KUMAR
• [PATCH v2 3/3] ARM: imx: fix/define clocks and create devices for imx dma   Uwe Kleine-König
• [PATCH v2 3/3] ARM: S5PC210: Set the common L2 cache configurations   Kukjin Kim
• [PATCH v2 3/3] ARM: S5PC210: Set the common L2 cache configurations   Kyungmin Park
• [PATCH V2 3/3] ARM: S5PV310: Add support HSMMC on SMDKV310 and SMDKC210   Jeongbae Seo
• [PATCH v2 3/3] ARM: twd_smp: add clock api support   Rob Herring
• [PATCH V2 3/4] ARM: S5P: Change VMALLOC_END to use more vmalloc()/ioremap() area   Kukjin Kim
• [PATCH v2 3/4] omap4 hsmmc: Register offset handling   G, Manjunath Kondaiah
• [PATCH v2 3/4] omap4 hsmmc: Register offset handling   kishore kadiyala
• [PATCH v2 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Kukjin Kim
• [PATCH v2 3/4] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver   Kukjin Kim
• [PATCH v2 3/5] mx27: update defconfig   Eric Bénard
• [PATCH v2 3/6] ARM: S5PV210: Add EPLL clock operations   Seungwhan Youn
• [PATCH v2 3/6] ARM: S5PV210: Add EPLL clock operations   Kukjin Kim
• [PATCH V2 30/69] ST SPEAr: Added PCIE host controller base driver support.   Viresh KUMAR
• [PATCH V2 31/69] ST SPEAr: Adding support for SSP PL022   Viresh KUMAR
• [PATCH V2 32/69] ST SPEAr: Adding support for SDHCI (SDIO)   Viresh KUMAR
• [PATCH V2 33/69] ST SPEAr: Changing resource size of amba devices to SZ_4K   Viresh KUMAR
• [PATCH V2 34/69] ST SPEAr: Replacing SIZE macro's with actual required size   Viresh KUMAR
• [PATCH V2 35/69] SPEAr: defines base addresses as ulong.   Viresh KUMAR
• [PATCH V2 36/69] ST SPEAr: Adding miscellaneous devices   Viresh KUMAR
• [PATCH V2 37/69] ST SPEAr 13xx : Adding support for SPEAr1310   Viresh KUMAR
• [PATCH V2 38/69] ST SPEAr: Adding support for DDR in clock framework   Viresh KUMAR
• [PATCH V2 39/69] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Viresh KUMAR
• [PATCH v2 4/4] ARM: S3C2416: Add platform helpers for setup SDHCI   Kukjin Kim
• [PATCH v2 4/4] ARM: S5PV310: Add platform data for S5PV310 FIMD and LTE480WV platform-lcd   Sangbeom Kim
• [PATCH v2 4/4] staging: tidspbridge: use new SCM DSP boot control fns   Omar Ramirez Luna
• [PATCH v2 4/5] mx3: update defconfig   Eric Bénard
• [PATCH v2 4/6] ARM: S5P: Add EPLL rate change warning   Seungwhan Youn
• [PATCH v2 4/6] ARM: S5P: Add EPLL rate change warning   Kukjin Kim
• [PATCH v2 4/6] ARM: S5P: Add EPLL rate change warning   Mark Brown
• [PATCH v2 4/6] ARM: S5P: Add EPLL rate change warning   Kukjin Kim
• [PATCH v2 4/6] ARM: S5P: Add EPLL rate change warning   Mark Brown
• [PATCH V2 40/69] ST SPEAr : FSMC (Flexible Static Memory Controller) NOR interface driver   Viresh KUMAR
• [PATCH V2 41/69] SPEAr Clock Framework: Adding support for PLL frequency change   Viresh KUMAR
• [PATCH V2 42/69] SPEAr Power Management: Added the support for Standby mode.   Viresh KUMAR
• [PATCH V2 43/69] GIC: Added dummy handlers for Power Management Suspend Resume   Viresh KUMAR
• [PATCH V2 44/69] SPEAr CPU freq: Adding support for CPU Freq framework   Viresh KUMAR
• [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport   Viresh KUMAR
• [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport   viresh kumar
• [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport   Andrew Morton
• [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport   Andrew Morton
• [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport   viresh kumar
• [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport   Pratyush ANAND
• [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport   Andrew Morton
• [PATCH V2 46/69] ST SPEAr13xx: Adding machine support for pci gadget   Viresh KUMAR
• [PATCH V2 47/69] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms   Viresh KUMAR
• [PATCH V2 48/69] ST SPEAr: replace readl, writel with __raw_readl, __raw_writel in uncompress.h   Viresh KUMAR
• [PATCH V2 49/69] ST SPEAr13xx: add L2 cache support   Viresh KUMAR
• [PATCH v2 5/5] mx51: update defconfig   Eric Bénard
• [PATCH v2 5/6] ASoC: SAMSUNG: Add S/PDIF CPU driver   Seungwhan Youn
• [PATCH v2 5/6] ASoC: SAMSUNG: Add S/PDIF CPU driver   Mark Brown
• [PATCH v2 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Wolfram Sang
• [PATCH v2 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Chris Ball
• [PATCH v2 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Zhu Richard-R65037
• [PATCH v2 5/6] mmc: sdhci-of-esdhc: factor out common stuff   Wolfram Sang
• [PATCH V2 50/69] ST SPEAr13xx: Modified static mappings   Viresh KUMAR
• [PATCH V2 51/69] SPEAr: Adding and Updating Clock definitions   Viresh KUMAR
• [PATCH V2 52/69] SPEAr : Pad multiplexing handling modified   Viresh KUMAR
• [PATCH V2 53/69] SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic implementation   Viresh KUMAR
• [PATCH V2 54/69] SPEAr : Updating pad multiplexing support   Viresh KUMAR
• [PATCH V2 55/69] ST SPEAr3xx: Passing pmx devices address from machine *.c files   Viresh KUMAR
• [PATCH V2 56/69] ST SPEAr Clock Framework: Updating for single image solution   Viresh KUMAR
• [PATCH V2 57/69] SPEAr3xx: Make local structures static   Viresh KUMAR
• [PATCH V2 58/69] SPEAR3xx: Rename register/irq defines to remove naming conflicts   Viresh KUMAR
• [PATCH V2 59/69] SPEAr3xx: Rework pmx_dev code to remove conflicts   Viresh KUMAR
• [PATCH v2 6/6] ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audio   Seungwhan Youn
• [PATCH V2 60/69] SPEAr3xx: Rework KConfig to allow all boards to be compiled in   Viresh KUMAR
• [PATCH V2 61/69] SPEAr3xx: Replace defconfigs with single unified defconfig   Viresh KUMAR
• [PATCH V2 62/69] ST SPEAr: Appending spear3** with global structures   viresh kumar
• [PATCH V2 62/69] ST SPEAr: Appending spear3** with global structures   viresh kumar
• [PATCH V2 62/69] ST SPEAr: Appending spear3** with global structures   Viresh KUMAR
• [PATCH V2 63/69] ST SPEAr3xx: Updating plgpio and emi source to make it compliant with single image strategy   Viresh KUMAR
• [PATCH V2 64/69] SPEAr6xx: Rework Kconfig for single image solution   Viresh KUMAR
• [PATCH V2 65/69] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig   Viresh KUMAR
• [PATCH V2 66/69] ST SPEAr13xx: Pass default padmux settings as parameter to spear13**_init routine   Viresh KUMAR
• [PATCH V2 67/69] ST SPEAr: Adding devices & clocks   Viresh KUMAR
• [PATCH V2 68/69] ST SPEAr: Adding information in Documentation/ and MAINTAINERS   Viresh KUMAR
• [PATCH V2 69/69] ST SPEAr: Updating defconfigs   Viresh KUMAR
• [PATCH v2 for 2.6.36 1/2] cpuimx27: fix compile when ULPI is selected   Uwe Kleine-König
• [PATCH v2 for 2.6.36 1/2] cpuimx27: fix compile when ULPI is selected   Eric Bénard
• [PATCH v2] ARM: S5PC210: I2C devices updates   Marek Szyprowski
• [PATCH v2] ARM: S5PC210: I2C devices updates   Kukjin Kim
• [PATCH v2] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH v2] ARM: allow, but warn, when issuing ioremap() on RAM   Uwe Kleine-König
• [PATCH v2] ARM: AT91: add board support for Pcontrol_G20   Peter Gsellmann
• [PATCH v2] ARM: Introduce patching of phys_to_virt and vice versa   Eric Miao
• [PATCH v2] ARM: Introduce patching of phys_to_virt and vice versa   Nicolas Pitre
• [PATCH v2] ARM: Introduce patching of phys_to_virt and vice versa   Eric Miao
• [PATCH v2] ARM: iomux-mx51: Add AUD5 pinmux definitions   Uwe Kleine-König
• [PATCH v2] ARM: mx3: fix build failure concerning MXC_INT_MMC_SDHC2   Fabio Estevam
• [PATCH v2] ARM: mx3: fix build failure concerning MXC_INT_MMC_SDHC2   Uwe Kleine-König
• [PATCH v2] ARM: S3C64XX: add support for mach-mini6410   Darius Augulis
• [PATCH v2] ARM: S3C64XX: add support for mach-mini6410   Darius Augulis
• [PATCH v2] ARM: S3C64XX: add support for mach-mini6410   Kukjin Kim
• [PATCH v2] ARM: S3C64XX: add support for mach-mini6410   Kukjin Kim
• [PATCH v2] ARM: SAMSUNG: Add the missed s3c_gpio_getpull() API   Kukjin Kim
• [PATCH v2] babbage: esdhc device registration   Shawn Guo
• [PATCH v2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH v2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH v2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH v2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH v2] hwmon: add generic GPIO fan driver   Russell King - ARM Linux
• [PATCH v2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH v2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH v2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH v2] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH v2] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Eric Bénard
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Eric Bénard
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Eric Bénard
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Eric Bénard
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Uwe Kleine-König
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Uwe Kleine-König
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Uwe Kleine-König
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Nicolas Pitre
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Russell King - ARM Linux
• [PATCH v2] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Eric Bénard
• [PATCH v2] i.MX35: use the correct IIM register to get CPU revision   Eric Bénard
• [PATCH v2] i.MX35: use the correct IIM register to get CPU revision   Fabio Estevam
• [PATCH v2] i.MX35: use the correct IIM register to get CPU revision   Uwe Kleine-König
• [PATCH v2] i.MX35: use the correct IIM register to get CPU revision   Sascha Hauer
• [PATCH v2] i.MX35: use the correct IIM register to get CPU revision   Uwe Kleine-König
• [PATCH v2] i.MX35: use the correct IIM register to get CPU revision   Uwe Kleine-König
• [PATCH v2] i.MX35: use the correct IIM register to get CPU revision   Eric Bénard
• [PATCH v2] Input: Make ADS7846 independent on regulator   Igor Grinberg
• [PATCH v2] Input: Make ADS7846 independent on regulator   Marek Vasut
• [PATCH v2] Input: Make ADS7846 independent on regulator   Dmitry Torokhov
• [PATCH v2] Input: Make ADS7846 independent on regulator   Mark Brown
• [PATCH v2] Input: Make ADS7846 independent on regulator   Dmitry Torokhov
• [PATCH v2] Input: Make ADS7846 independent on regulator   Mark Brown
• [PATCH v2] Input: Make ADS7846 independent on regulator   Alan Cox
• [PATCH v2] Input: Make ADS7846 independent on regulator   Mark Brown
• [PATCH v2] Input: Make ADS7846 independent on regulator   Linus Walleij
• [PATCH v2] Input: Make ADS7846 independent on regulator   Mark Brown
• [PATCH v2] Input: Make ADS7846 independent on regulator   Linus Walleij
• [PATCH v2] Input: Make ADS7846 independent on regulator   Mark Brown
• [PATCH v2] mach-cpuimx27: workaround USB PHY detection problem   Eric Bénard
• [PATCH v2] MX27 3ds: Add SDHC1 support to mx27 3ds   Rogerio Pimentel
• [PATCH v2] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Kevin Hilman
• [PATCH v2] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Tony Lindgren
• [PATCH v2] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Varadarajan, Charulatha
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   G, Manjunath Kondaiah
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   Dmitry Torokhov
• [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe   G, Manjunath Kondaiah
• [PATCH v2] omap4: pandaboard: fix up mmc card detect logic   Nishanth Menon
• [PATCH v2] omap4: pandaboard: fix up mmc card detect logic   Samuel Ortiz
• [PATCH v3 0/2] [ARM] Dove: add support for MPP configuration   Mike Rapoport
• [PATCH v3 0/2] add support for the Marvell Dove SDHCI controller   Mike Rapoport
• [patch v3 0/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [PATCH V3 0/3] ARM: S5PV310: Move and Update L2 cache init code   Kukjin Kim
• [PATCH v3 0/3] ASoC AC97 audio support for ep93xx   Mika Westerberg
• [PATCH v3 0/3] ASoC AC97 audio support for ep93xx   Mark Brown
• [PATCH v3 0/4] Add support for camera capture in s5p-fimc driver   Sylwester Nawrocki
• [PATCH V3 0/6] pxa3xx_nand update series set   Lei Wen
• [PATCH V3 0/6] pxa3xx_nand update series set   Haojian Zhuang
• [PATCH V3 0/6] SD/MMC-driver for MX35/51 (and improvements to SDHCI)   Eric Bénard
• [patch v3 00/10] efikamx support improvements - take 3   Arnaud Patard (Rtp)
• [PATCH v3 00/12] tnetv107x ssp driver stack   Cyril Chemparathy
• [PATCH v3 00/12] tnetv107x ssp driver stack   Kevin Hilman
• [PATCH v3 00/12] tnetv107x ssp driver stack   Andrew Morton
• [PATCH v3 00/13] OMAP: DMA: hwmod and DMA as platform device   G, Manjunath Kondaiah
• [PATCH v3 00/13] OMAP: DMA: hwmod and DMA as platform device   G, Manjunath Kondaiah
• [patch v3 01/10] efikamx: read board id   Arnaud Patard (Rtp)
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Andrew Morton
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Arnd Bergmann
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Alan Cox
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v3 01/12] misc: add driver for sequencer serial port   Russell King - ARM Linux
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   Nishanth Menon
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   G, Manjunath Kondaiah
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   Menon, Nishanth
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   G, Manjunath Kondaiah
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   G, Manjunath Kondaiah
• [patch v3 02/10] imx51: fix iomux configuration   Arnaud Patard (Rtp)
• [PATCH v3 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
• [PATCH v3 02/13] OMAP: DMA: Introduce errata handling feature   G, Manjunath Kondaiah
• [patch v3 03/10] imx51: enhance iomux configuration for esdhc support   Arnaud Patard (Rtp)
• [PATCH v3 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
• [PATCH v3 03/13] OMAP: DMA: Introduce DMA device attributes   G, Manjunath Kondaiah
• [patch v3 04/10] efikamx: add mmc support   Arnaud Patard (Rtp)
• [patch v3 04/10] efikamx: add mmc support   Uwe Kleine-König
• [PATCH v3 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
• [PATCH v3 04/13] OMAP2420: DMA: hwmod: add system DMA   G, Manjunath Kondaiah
• [patch v3 05/10] imx51: add gpio mode for csi1 {h,v}sync   Arnaud Patard (Rtp)
• [PATCH v3 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
• [PATCH v3 05/13] OMAP2430: DMA: hwmod: add system DMA   G, Manjunath Kondaiah
• [patch v3 06/10] efikamx: add leds support   Arnaud Patard (Rtp)
• [PATCH v3 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
• [PATCH v3 06/13] OMAP3: DMA: hwmod: add system DMA   G, Manjunath Kondaiah
• [patch v3 07/10] efikamx: add support for power key   Arnaud Patard (Rtp)
• [patch v3 07/10] efikamx: add support for power key   Uwe Kleine-König
• [patch v3 07/10] efikamx: add support for power key   Arnaud Patard (Rtp)
• [patch v3 07/10] efikamx: add support for power key   Uwe Kleine-König
• [PATCH v3 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
• [PATCH v3 07/13] OMAP4: DMA: hwmod: add system DMA   G, Manjunath Kondaiah
• [patch v3 08/10] imx51: fix gpio_4_24 and gpio_4_25 pad configuration   Arnaud Patard (Rtp)
• [PATCH v3 08/12] gpio: add ti-ssp virtual gpio driver   Cyril Chemparathy
• [PATCH v3 08/13] OMAP1: DMA: Introduce DMA driver as platform device   G, Manjunath Kondaiah
• [patch v3 09/10] efikamx: add spi nor support   Arnaud Patard (Rtp)
• [PATCH v3 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
• [PATCH v3 09/13] OMAP2+: DMA: hwmod: Device registration   G, Manjunath Kondaiah
• [PATCH V3 1/1] mx35pdk: add debug board support   jgq516 at gmail.com
• [PATCH V3 1/1] mx35pdk: add debug board support   xiao jiang
• [PATCH V3 1/1] mx35pdk: add debug board support   Fabio Estevam
• [PATCH V3 1/1] mx35pdk: add debug board support   xiao jiang
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Chris Ball
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Marek Vasut
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Chris Ball
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Haojian Zhuang
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Chris Ball
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Chris Ball
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   zhangfei gao
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Marek Vasut
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   zhangfei gao
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Marek Vasut
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   zhangfei gao
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   Marek Vasut
• [PATCH V3 1/1]MMC: add support of sdhci-pxa driver   zhangfei gao
• [PATCH v3 1/2] [ARM] Dove: add support for GPIOs 64-71   Mike Rapoport
• [patch v3 1/2] ARM: Add zboot support for SuperH Mobile ARM   Simon Horman
• [PATCH v3 1/2] MMC: add support for the Marvell Dove SDHCI controller   Saeed Bishara
• [PATCH v3 1/2] MMC: add support for the Marvell Dove SDHCI controller   Mike Rapoport
• [PATCH V3 1/3] ARM: Add L2X0 PREFETCH and POWER control register   Kukjin Kim
• [PATCH V3 1/3] ARM: Add L2X0 PREFETCH and POWER control register   Catalin Marinas
• [PATCH V3 1/3] ARM: Add L2X0 PREFETCH and POWER control register   Kukjin Kim
• [PATCH v3 1/3] ASoC: add ep93xx AC97 audio driver   Mika Westerberg
• [PATCH v3 1/6] ARM: S5P: Reduce duplicated EPLL control codes   Seungwhan Youn
• [PATCH v3 1/6] ARM: S5P: Reduce duplicated EPLL control codes   Kukjin Kim
• [PATCH V3 1/6] pxa3xx_nand: make scan procedure more clear   Lei Wen
• [patch v3 10/10] efikamx: add reset   Arnaud Patard (Rtp)
• [patch v3 10/10] efikamx: add reset   Uwe Kleine-König
• [patch v3 10/10] efikamx: add reset   Arnaud Patard (Rtp)
• [PATCH v3 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
• [PATCH v3 10/12] backlight: add support for tps6116x controller   Joe Perches
• [PATCH v3 10/13] OMAP: DMA: Convert DMA library into DMA platform Driver   G, Manjunath Kondaiah
• [PATCH v3 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
• [PATCH v3 11/13] OMAP: DMA: Use DMA device attributes   G, Manjunath Kondaiah
• [PATCH v3 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
• [PATCH v3 12/13] OMAP2+: DMA: descriptor autoloading feature   G, Manjunath Kondaiah
• [PATCH v3 13/13] OMAP: PM: DMA: Enable runtime pm   G, Manjunath Kondaiah
• [PATCH v3 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Mike Rapoport
• [PATCH v3 2/2] [ARM] Dove: rename SDCHI devices to "sdhci-dove"   Mike Rapoport
• [PATCH v3 2/2] [ARM] Dove: rename SDCHI devices to "sdhci-dove"   Saeed Bishara
• [PATCH v3 2/2] [ARM] Dove: rename SDCHI devices to "sdhci-dove"   saeed bishara
• [patch v3 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [PATCH V3 2/2] ARM: S5PV310: Add support External Interrupt   Kukjin Kim
• [PATCH V3 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Jeongbae Seo
• [PATCH V3 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kyungmin Park
• [PATCH V3 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH v3 2/3] ARM: ep93xx: add AC97 platform support   Mika Westerberg
• [PATCH v3 2/3] ARM: ep93xx: add AC97 platform support   Ryan Mallon
• [PATCH v3 2/3] ARM: ep93xx: add AC97 platform support   H Hartley Sweeten
• [PATCH v3 2/3] ARM: ep93xx: add AC97 platform support   Ryan Mallon
• [PATCH v3 2/3] ARM: ep93xx: add AC97 platform support   H Hartley Sweeten
• [PATCH V3 2/3] ARM: S5PV310: Remove L2 cache init in machine   Kukjin Kim
• [PATCH V3 2/3] ARM: S5PV310: Remove L2 cache init in machine   Daein Moon
• [PATCH V3 2/3] ARM: S5PV310: Remove L2 cache init in machine   Kukjin Kim
• [PATCH V3 2/6] pxa3xx_nand: rework irq logic   Lei Wen
• [PATCH V3 3/3] ARM: S5PV310: Add L2 cache init function in cpu.c   Kukjin Kim
• [PATCH v3 3/3] ASoC: ep93xx: add Simplemachines Sim.One AC97 audio support   Mika Westerberg
• [PATCH v3 3/4] OMAP: dsp: convert OMAP3430 adaptation layer to use new SCM DSP boot control fns   Omar Ramirez Luna
• [PATCH V3 3/6] pxa3xx_nand: discard wait_for_event, write_cmd, __readid function   Lei Wen
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Liam Girdwood
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Liam Girdwood
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Liam Girdwood
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Samuel Ortiz
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Liam Girdwood
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Lukasz Majewski
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Lukasz Majewski
• [PATCH v3 4/5] mfd: regulator: max8998: voltages and GPIOs defined at platform data structure   Marek Szyprowski
• [PATCH v3 4/6] ARM: S5P: Add EPLL rate change warning   Seungwhan Youn
• [PATCH v3 4/6] ARM: S5P: Add EPLL rate change warning   Kukjin Kim
• [PATCH V3 4/6] pxa3xx_nand: unify prepare command   Lei Wen
• [PATCH v3 5/5] h1940: add UDA1380 to i2c devices list   Vasily Khoruzhick
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Kevin Hilman
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Ben Dooks
• [PATCH V3 5/6] pxa3xx_nand: mtd scan id process could be defined by driver itself   Lei Wen
• [PATCH V3 6/6] pxa3xx_nand: clean the keep configure code   Lei Wen
• [PATCH V3] arm & sh: factorised duplicated clkdev.c   Russell King - ARM Linux
• [PATCH v3] ARM: AT91: add board support for Pcontrol_G20   Peter Gsellmann
• [PATCH v3] ARM: AT91: add board support for Pcontrol_G20   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] ARM: S5PC110: add support for S6E63M0 LCD controller on Goni board   Kukjin Kim
• [PATCH v3] ARM: S5PC110: add support for S6E63M0 LCD controller on Goni board   Marek Szyprowski
• [PATCH V3] ARM: S5PV310: Add I2C channel 3, 4, 5, 6, and 7 device support   Marek Szyprowski
• [PATCH V3] ARM: S5PV310: Add I2C channel 3, 4, 5, 6, and 7 device support   Kukjin Kim
• [PATCH v3] at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board   Nicolas Ferre
• [PATCH v3] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH v3] hwmon: add generic GPIO fan driver   Guenter Roeck
• [PATCH v3] hwmon: add generic GPIO fan driver   Simon Guinot
• [PATCH v3] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Eric Bénard
• [PATCH v3] imx-esdhc: update devices registration   Eric Bénard
• [PATCH v3] imx-esdhc: update devices registration   Uwe Kleine-König
• [PATCH v3] imx-esdhc: update devices registration   Eric Bénard
• [PATCH v3] imx-esdhc: update devices registration   Wolfram Sang
• [PATCH v3] OMAP2/3: NAND: Convert write/read functions to raw read/write   Artem Bityutskiy
• [PATCH v3] OMAP: NAND: Fix static declaration warning   Vimal Singh
• [PATCH v3] OMAP: NAND: Fix static declaration warning   Artem Bityutskiy
• [PATCH v3] TWL IRQ: Fix fucntion declaration warnings   G, Manjunath Kondaiah
• [PATCH v3] TWL IRQ: Fix fucntion declaration warnings   Samuel Ortiz
• [PATCH v3] TWL IRQ: Fix fucntion declaration warnings   Uwe Kleine-König
• [PATCH v3] TWL IRQ: Fix fucntion declaration warnings   Samuel Ortiz
• [PATCH v4 0/2] add support for the Marvell Dove SDHCI controller   Mike Rapoport
• [PATCH v4 0/2] add support for the Marvell Dove SDHCI controller   Wolfram Sang
• [PATCH v4 0/4] Add support for camera capture in s5p-fimc driver   Sylwester Nawrocki
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Stephan Linz
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Tim Nordell
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Tony Lindgren
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Tim Nordell
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Ashwin Bihari
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Stephan Linz
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo   Tony Lindgren
• [PATCH v4 0/4] OMAP2/3: DMA: FIFO drain errata fixes   Peter Ujfalusi
• [PATCH v4 0/4] OMAP2/3: DMA: FIFO drain errata fixes   Peter Ujfalusi
• [PATCH v4 0/4] OMAP2/3: DMA: FIFO drain errata fixes   Peter Ujfalusi
• [PATCH v4 0/4] OMAP2/3: DMA: FIFO drain errata fixes   Tony Lindgren
• [PATCH V4 0/7] Generalise ARM perf-events backend for oprofile   Matt Fleming
• [patch v4 00/10] efikamx support improvements - take 4   Arnaud Patard (Rtp)
• [PATCH v4 00/12] tnetv107x ssp driver stack   Cyril Chemparathy
• [patch v4 01/10] efikamx: read board id   Arnaud Patard (Rtp)
• [patch v4 01/10] efikamx: read board id   Marek Vasut
• [PATCH v4 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v4 01/12] misc: add driver for sequencer serial port   Linus Walleij
• [PATCH v4 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v4 01/12] misc: add driver for sequencer serial port   Linus Walleij
• [patch v4 02/10] imx51: fix iomux configuration   Arnaud Patard (Rtp)
• [patch v4 02/10] imx51: fix iomux configuration   Marek Vasut
• [patch v4 02/10] imx51: fix iomux configuration   Xinyu Chen
• [PATCH v4 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
• [patch v4 03/10] imx51: enhance iomux configuration for esdhc support   Arnaud Patard (Rtp)
• [PATCH v4 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
• [patch v4 04/10] efikamx: add mmc support   Arnaud Patard (Rtp)
• [PATCH v4 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
• [patch v4 05/10] imx51: add gpio mode for csi1 {h,v}sync   Arnaud Patard (Rtp)
• [patch v4 05/10] imx51: add gpio mode for csi1 {h,v}sync   Marek Vasut
• [PATCH v4 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
• [patch v4 06/10] efikamx: add leds support   Arnaud Patard (Rtp)
• [patch v4 06/10] efikamx: add leds support   Marek Vasut
• [PATCH v4 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
• [patch v4 07/10] efikamx: add support for power key   Arnaud Patard (Rtp)
• [PATCH v4 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
• [patch v4 08/10] imx51: fix gpio_4_24 and gpio_4_25 pad configuration   Arnaud Patard (Rtp)
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   Cyril Chemparathy
• [patch v4 09/10] efikamx: add spi nor support   Arnaud Patard (Rtp)
• [patch v4 09/10] efikamx: add spi nor support   Marek Vasut
• [PATCH v4 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
• [PATCH V4 1/1]MMC: add support of sdhci-pxa driver   zhangfei gao
• [PATCH V4 1/1]MMC: add support of sdhci-pxa driver   Chris Ball
• [PATCH v4 1/2] MMC: add support for the Marvell Dove SDHCI controller   Mike Rapoport
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   Samuel Ortiz
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   Varadarajan, Charulatha
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   kishore kadiyala
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   Varadarajan, Charulatha
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   Varadarajan, Charulatha
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1   DebBarma, Tarun Kanti
• [PATCH v4 1/4] omap: dma: Fix buffering disable bit setting for omap24xx   Peter Ujfalusi
• [PATCH v4 1/4] omap: dma: Fix buffering disable bit setting for omap24xx   G, Manjunath Kondaiah
• [PATCH v4 1/4] omap: dma: Fix buffering disable bit setting for omap24xx   Jarkko Nikula
• [patch v4 10/10] efikamx: add reset   Arnaud Patard (Rtp)
• [PATCH v4 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
• [PATCH v4 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
• [PATCH v4 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
• [PATCH v4 2/2] [ARM] Dove: rename SDHCI devices to "sdhci-dove"   Mike Rapoport
• [PATCH v4 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH V4 2/3] ARM: S5PV310: Remove L2 cache init in machine   Kukjin Kim
• [PATCH v4 2/4] OMAP: DMA: Introduce errata handling variable, and macro   Peter Ujfalusi
• [PATCH v4 3/4] OMAP2: DMA: Use errata flag for disabling buffering   Peter Ujfalusi
• [PATCH v4 3/4] OMAP2: DMA: Use errata flag for disabling buffering   G, Manjunath Kondaiah
• [PATCH v4 4/4] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   Tony Lindgren
• [PATCH v4 4/4] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   G, Manjunath Kondaiah
• [PATCH v4 4/4] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   Peter Ujfalusi
• [PATCH v4 4/4] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   G, Manjunath Kondaiah
• [PATCH v4 4/4] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   Peter Ujfalusi
• [PATCH v4] ARM: AT91: add board support for Pcontrol_G20   Peter Gsellmann
• [PATCH v4] ARM: AT91: add board support for Pcontrol_G20   Nicolas Ferre
• [PATCH v4] ARM: AT91: add board support for Pcontrol_G20   Russell King - ARM Linux
• [PATCH v4] ARM: AT91: add board support for Pcontrol_G20   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] ARM: AT91: add board support for Pcontrol_G20   avictor.za at gmail.com
• [PATCH v4] ARM: AT91: add board support for Pcontrol_G20   Peter Gsellmann
• [PATCH v4] ARM: AT91: add board support for Pcontrol_G20   Nicolas Ferre
• [PATCH v4] ARM: Fix sparse warnings due to variables conflicts.   Nishanth Menon
• [PATCH v4] ARM: Fix sparse warnings due to variables conflicts.   Tony Lindgren
• [PATCH v4] ARM: Fix sparse warnings due to variables conflicts.   Russell King - ARM Linux
• [PATCH v4] ARM: Fix sparse warnings due to variables conflicts.   G, Manjunath Kondaiah
• [PATCH v4] ARM: Fix sparse warnings due to variables conflicts.   Varadarajan, Charulatha
• [PATCH v4] ARM: Fix sparse warnings due to variables conflicts.   Sourav Poddar
• [PATCH v4] imx-esdhc: update devices registration   Eric Bénard
• [PATCH v4] imx-esdhc: update devices registration   Uwe Kleine-König
• [PATCH v4] imx-esdhc: update devices registration   Eric Bénard
• [PATCH v4] imx-esdhc: update devices registration   Uwe Kleine-König
• [PATCH v4] imx-esdhc: update devices registration   Eric Bénard
• [PATCH v4] imx-esdhc: update devices registration   Uwe Kleine-König
• [PATCH v4] imx-esdhc: update devices registration   Eric Bénard
• [PATCH v4] spi: add spi_tegra driver   Grant Likely
• [PATCH v4] spi: add spi_tegra driver   Erik Gilling
• [PATCH v5 0/3] OMAP2/3: DMA: FIFO drain errata fixes   Peter Ujfalusi
• [PATCH v5 0/3] OMAP2/3: DMA: FIFO drain errata fixes   G, Manjunath Kondaiah
• [PATCH v5 0/3] OMAP2/3: DMA: FIFO drain errata fixes   Tony Lindgren
• [PATCH v5 0/3] OMAP2/3: DMA: FIFO drain errata fixes   Tony Lindgren
• [PATCH v5 0/3] OMAP2/3: DMA: FIFO drain errata fixes   Peter Ujfalusi
• [PATCH V5 0/6] SD/MMC driver for MX25/35/51   Wolfram Sang
• [PATCH V5 0/6] SD/MMC driver for MX25/35/51   Chris Ball
• [PATCH V5 0/7] Generalise ARM perf-events backend for oprofile   Matt Fleming
• [PATCH V5 0/7] Generalise ARM perf-events backend for oprofile   Robert Richter
• [PATCH V5 0/7] Generalise ARM perf-events backend for oprofile   Matt Fleming
• [PATCH v5 1/3] omap: dma: Fix buffering disable bit setting for omap24xx   Peter Ujfalusi
• [PATCH v5 1/3] omap: dma: Fix buffering disable bit setting for omap24xx   G, Manjunath Kondaiah
• [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc   Ghorai, Sukumar
• [PATCH v5 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH v5 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Chris Ball
• [PATCH v5 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kyungmin Park
• [PATCH v5 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Andrew Morton
• [PATCH v5 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH v5 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kukjin Kim
• [PATCH v5 2/3] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   Peter Ujfalusi
• [PATCH v5 3/3] OMAP: DMA: Use flags for errata handling   Peter Ujfalusi
• [PATCH v5] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v5] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH v5] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH v5] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v5] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH v5] power: introduce library for device-specific OPPs   Kevin Hilman
• [PATCH v5] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v6 0/8] ptp: IEEE 1588 hardware clock support   M. Warner Losh
• [PATCH v7] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v7] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH v7] power: introduce library for device-specific OPPs   Kevin Hilman
• [PATCH v7] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH v7] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH v7] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH v7] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH, RFC] Remove dependency of plat-orion time code on mach directory includes.   Lennert Buytenhek
• [PATCH,RFC] Remove dependency of plat-orion time code on mach directory includes.   Nicolas Pitre
• [PATCH/RFC] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Eric Bénard
• [PATCH/RFC] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Sascha Hauer
• [PATCH/RFC] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Uwe Kleine-König
• [PATCH/RFC] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Uwe Kleine-König
• [PATCH/RFC] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Daniel Mack
• [PATCH/RFC] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Uwe Kleine-König
• [PATCH/RFC] i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472   Eric Bénard
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Konstantin Sinyuk
• [PATCH] [ARM] dove: add support for CM-A510 machine.   saeed bishara
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Mike Rapoport
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Mike Rapoport
• [PATCH] [ARM] Kirkwood: add fan support for Network Space Max v2   Simon Guinot
• [PATCH] [ARM] Kirkwood: add fan support for Network Space Max v2   Guenter Roeck
• [PATCH] [RFC][ARM] pxa: rework pxa3xx-ulpi driver calls for ohci-pxa27x   Igor Grinberg
• [PATCH] Acme Systems FOX Board G20 board files   Sergio Tanzilli
• [PATCH] Acme Systems FOX Board G20 board files   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] amba: add name based matching   Rabin Vincent
• [PATCH] amba: add name based matching   Russell King - ARM Linux
• [PATCH] amba: add name based matching   Rabin Vincent
• [PATCH] arch/arm/kernel/hw_breakpoint.c: Convert WARN_ON to WARN   Joe Perches
• [PATCH] arch: arm/imx: fix memory init in imx_dma_request()   Vasiliy Kulikov
• [PATCH] arch: arm/imx: fix memory init in imx_dma_request()   Uwe Kleine-König
• [PATCH] arm/nuc900: delete __initdata for nuc900 lcd structures.   Wan ZongShun
• [PATCH] arm/nuc900: disable hardware cursor setting   Wan ZongShun
• [PATCH] ARM: add cpu_idle_wait() to support CPUidle on SMP systems.   Kevin Hilman
• [PATCH] ARM: add PrimeCell generic DMA to MMCI/PL180   Linus Walleij
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Linus Walleij
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Linus Walleij
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Baruch Siach
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Andrew Morton
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Greg KH
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Greg KH
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Greg KH
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Greg KH
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Nicolas Pitre
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Greg KH
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Nicolas Pitre
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Arnd Bergmann
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Dave Airlie
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Uwe Kleine-König
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Christoph Hellwig
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Arnd Bergmann
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Nicolas Pitre
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Guennadi Liakhovetski
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Pedanekar, Hemant
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Uwe Kleine-König
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Uwe Kleine-König
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Catalin Marinas
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Catalin Marinas
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Pawel Moll
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Catalin Marinas
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Catalin Marinas
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Catalin Marinas
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Nicolas Pitre
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Woodruff, Richard
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Woodruff, Richard
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Catalin Marinas
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Benjamin Herrenschmidt
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Benjamin Herrenschmidt
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Felipe Contreras
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Woodruff, Richard
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Benjamin Herrenschmidt
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Colin Cross
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: allow, but warn, when issuing ioremap() on RAM   Russell King - ARM Linux
• [PATCH] ARM: AT91: add board support for Pcontrol_G20   Peter Gsellmann
• [PATCH] ARM: AT91: add board support for Pcontrol_G20   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: AT91: add board support for Pcontrol_G20   Peter Gsellmann
• [PATCH] ARM: cache: implement flush_icache_all for rest of the CPUs   Mika Westerberg
• [PATCH] ARM: Check for is_smp for tlb_ops and cache_ops boardcast   Tony Lindgren
• [PATCH] ARM: Check for is_smp for tlb_ops and cache_ops boardcast   Russell King - ARM Linux
• [PATCH] ARM: Check for is_smp for tlb_ops and cache_ops boardcast   Tony Lindgren
• [PATCH] ARM: Check for is_smp for tlb_ops and cache_ops boardcast   Russell King - ARM Linux
• [PATCH] ARM: Check for is_smp for tlb_ops and cache_ops boardcast   Tony Lindgren
• [PATCH] ARM: expose RealView PB1176 ROM using physmap and map_rom   Linus Walleij
• [PATCH] ARM: Fix data abort accessing proc_info from __lookup_processor_type (Re: [PATCH 03/10] ARM: hotplug cpu: Keep processor information, startup code & __lookup_processor_type)   Anand Gadiyar
• [PATCH] ARM: Fix data abort accessing proc_info from __lookup_processor_type (Re: [PATCH 03/10] ARM: hotplug cpu: Keep processor information, startup code & __lookup_processor_type)   Tony Lindgren
• [PATCH] ARM: Fix data abort accessing proc_info from __lookup_processor_type (Re: [PATCH 03/10] ARM: hotplug cpu: Keep processor information, startup code & __lookup_processor_type)   Russell King - ARM Linux
• [PATCH] ARM: Fix data abort accessing proc_info from __lookup_processor_type (Re: [PATCH 03/10] ARM: hotplug cpu: Keep processor information, startup code & __lookup_processor_type)   Tony Lindgren
• [PATCH] ARM: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9   Tony Lindgren
• [PATCH] ARM: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9   Daniel Walker
• [PATCH] ARM: fix isb regression on CPU < v7   Linus Walleij
• [PATCH] ARM: fix isb regression on CPU < v7   Will Deacon
• [PATCH] arm: GIC: Use the irq_to_desc for SPARSE IRQ   Kyungmin Park
• [PATCH] ARM: imx serial driver: fix resume   Daniel Mack
• [PATCH] ARM: imx serial driver: fix resume   Andrew Morton
• [PATCH] ARM: imx serial driver: fix resume   Uwe Kleine-König
• [PATCH] ARM: imx serial driver: fix resume   Uwe Kleine-König
• [PATCH] ARM: imx serial driver: fix resume   Daniel Mack
• [PATCH] ARM: imx serial driver: fix resume   Uwe Kleine-König
• [PATCH] ARM: imx: Add iram allocator functions   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: Add iram allocator functions   Amit Kucheria
• [PATCH] ARM: imx: Add iram allocator functions   Lothar Waßmann
• [PATCH] ARM: imx: Add iram allocator functions   Amit Kucheria
• [PATCH] ARM: imx: Add iram allocator functions   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: Add iram allocator functions   Uwe Kleine-König
• [PATCH] ARM: imx: Add iram allocator functions   Uwe Kleine-König
• [PATCH] ARM: imx: Add iram allocator functions   Nguyen Dinh-R00091
• [PATCH] ARM: imx: Add iram allocator functions   Uwe Kleine-König
• [PATCH] ARM: imx: Add some core definitions for MX53   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: Add some core definitions for MX53   Uwe Kleine-König
• [PATCH] ARM: imx: Add some core definitions for MX53   Nguyen Dinh-R00091
• [PATCH] ARM: imx: Add some core definitions for MX53   Grant Likely
• [PATCH] ARM: imx: Add some core definitions for MX53   Uwe Kleine-König
• [PATCH] ARM: imx: Add some core definitions for MX53   Grant Likely
• [PATCH] ARM: imx: Add some core definitions for MX53   Sascha Hauer
• [PATCH] ARM: imx: Add some core definitions for MX53   Eric Bénard
• [PATCH] ARM: imx: Add some core definitions for MX53   Rob Herring
• [PATCH] ARM: imx: Add some core definitions for MX53   Sascha Hauer
• [PATCH] ARM: imx: Add some core definitions for MX53   Nguyen Dinh-R00091
• [PATCH] ARM: imx: Add some core definitions for MX53   Sascha Hauer
• [PATCH] ARM: imx: Add some core definitions for MX53   Robert Schwebel
• [PATCH] ARM: imx: change mx51.h into mx5x.h   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: change mx51.h into mx5x.h   Uwe Kleine-König
• [PATCH] ARM: imx: change mx51.h into mx5x.h   Amit Kucheria
• [PATCH] ARM: imx: change mx51.h into mx5x.h   Nguyen Dinh-R00091
• [PATCH] ARM: imx: change mx51.h into mx5x.h   Uwe Kleine-König
• [PATCH] ARM: imx: change mx51.h into mx5x.h   Nguyen Dinh-R00091
• [PATCH] ARM: imx: change mx51.h into mx5x.h   Uwe Kleine-König
• [PATCH] ARM: imx: Fix GPIO_1_xx settings that are wrongly assumed   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: Fix GPIO_1_xx settings that are wrongly assumed   Uwe Kleine-König
• [PATCH] ARM: imx: Fix GPIO_1_xx settings that are wrongly assumed   Eric Bénard
• [PATCH] ARM: io: Fix namespace conflicts.   Varadarajan, Charulatha
• [PATCH] ARM: iomux-mx51: Add AUD5 pinmux definitions   Uwe Kleine-König
• [PATCH] ARM: iomux-mx51: Add AUD5 pinmux definitions   Lothar Waßmann
• [PATCH] arm: mach-msm: fix error handling in msm_iommu_probe()   Vasiliy Kulikov
• [PATCH] arm: mach-msm: fix error handling in msm_iommu_probe()   Stepan Moskovchenko
• [PATCH] ARM: memblock: set allocation limit for MEMBLOCK_ALLOC_ANYWHERE   Catalin Marinas
• [PATCH] ARM: memblock: set allocation limit for MEMBLOCK_ALLOC_ANYWHERE   Russell King - ARM Linux
• [PATCH] ARM: memblock: set allocation limit for MEMBLOCK_ALLOC_ANYWHERE   Will Deacon
• [PATCH] ARM: memblock: set allocation limit for MEMBLOCK_ALLOC_ANYWHERE   Russell King - ARM Linux
• [PATCH] ARM: memblock: set allocation limit for MEMBLOCK_ALLOC_ANYWHERE   Will Deacon
• [PATCH] ARM: memblock: set allocation limit for MEMBLOCK_ALLOC_ANYWHERE   Russell King - ARM Linux
• [PATCH] arm: mm: allow boards to fiddle with meminfo   Felipe Contreras
• [PATCH] arm: mm: use memblock for memory init   Felipe Contreras
• [PATCH] arm: mm: use memblock for memory init   Felipe Contreras
• [PATCH] ARM: mmp: fix cpuid detection on mmp2   Haojian Zhuang
• [PATCH] ARM: mmp: fix cpuid detection on mmp2   eric.y.miao at gmail.com
• [PATCH] arm: omap: complete removal of machine_desc.io_pg_offst and .phys_io   Russell King - ARM Linux
• [PATCH] arm: omap: complete removal of machine_desc.io_pg_offst and .phys_io   Russell King - ARM Linux
• [PATCH] arm: omap: complete removal of machine_desc.io_pg_offst and .phys_io   Tony Lindgren
• [PATCH] arm: omap: complete removal of machine_desc.io_pg_offst and .phys_io   Anand Gadiyar
• [PATCH] ARM: OMAP: Modified omap_mux_init_signal() to take in const char *   Tim Nordell
• [PATCH] ARM: OMAP: Modified omap_mux_init_signal() to take in const char *   Tony Lindgren
• [PATCH] ARM: OMAP: Modified omap_mux_init_signal() to take in const char *   Tim Nordell
• [PATCH] ARM: orion5x/kirkwood/mv78xx0: fix MPP configuration corner cases   Mike Rapoport
• [PATCH] ARM: orion5x/kirkwood/mv78xx0: fix MPP configuration corner cases   Nicolas Pitre
• [PATCH] ARM: orion5x/kirkwood/mv78xx0: fix MPP configuration corner cases   Ben Dooks
• [PATCH] ARM: orion5x/kirkwood/mv78xx0: fix MPP configuration corner cases   Mike Rapoport
• [PATCH] ARM: pcm043 micrell ksz8041nl phy support   Tim Sander
• [PATCH] ARM: pcm043 micrell ksz8041nl phy support   Fabio Estevam
• [PATCH] ARM: pcm043 micrell ksz8041nl phy support   Tim Sander
• [PATCH] arm: perf: Fix build break due to a typo   Anand Gadiyar
• [PATCH] arm: perf: Fix build break due to a typo   Ingo Molnar
• [PATCH] ARM: PL330: Accept revisions of the dmac   Linus Walleij
• [PATCH] ARM: print FPGA info on plat-versatile variants   Linus Walleij
• [PATCH] ARM: pxa: Add Balloon3 NAND ready check   Marek Vasut
• [PATCH] ARM: pxa: Introduce pxa{25x,27x,3xx}_map_io()   Marek Vasut
• [PATCH] ARM: S3C2416: Add Power Management support for SMDK2416   Kukjin Kim
• [PATCH] ARM: S3C24XX: Fix nand partition table for s3c24XX   Kukjin Kim
• [PATCH] ARM: S3C24XX: Fix the S3C24XX_VA_GPIO mapping   Kukjin Kim
• [PATCH] ARM: S3C24XX: Fix the S3C24XX_VA_GPIO mapping   Ben Dooks
• [PATCH] ARM: S3C24XX: Fix the S3C24XX_VA_GPIO mapping   Kukjin Kim
• [PATCH] ARM: S5PC100: Debug clock sources   Jassi Brar
• [PATCH] ARM: S5PC100: Debug clock sources   Kukjin Kim
• [PATCH] arm: s5pc210: Use the nr_irqs instead of NR_IRQS   Kyungmin Park
• [PATCH] ARM: S5PV210: Add audio support to Goni and Aquila board   Chanwoo Choi
• [PATCH] ARM: S5PV210: Fix build error on pm   Sangbeom Kim
• [PATCH] ARM: S5PV210: Fix build error on pm   Kukjin Kim
• [PATCH] ARM: S5PV310: Update MAX_COMBINER_NR   Sangbeom Kim
• [PATCH] ARM: S5PV310: Update MAX_COMBINER_NR   Kukjin Kim
• [PATCH] ARM: Samsung: add a workaround for get_clock() for serial driver   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add the missed s3c_gpio_getpull() API   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add the missed s3c_gpio_getpull() API   Sergei Shtylyov
• [PATCH] ARM: SAMSUNG: Add the missed s3c_gpio_getpull() API   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add the missed s3c_gpio_getpull() API   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add the missed s3c_gpio_getpull() API   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Bug fix spin_lock recursion in clk_enable() and clk_disable()   Ben Dooks
• [PATCH] ARM: SAMSUNG: Bug fix spin_lock recursion in clk_enable() and clk_disable()   Russell King - ARM Linux
• [PATCH] ARM: SAMSUNG: Bug fix spin_lock recursion in clk_enable() and clk_disable()   Ben Dooks
• [PATCH] ARM: SAMSUNG: Bug fix spin_lock recursion in clk_enable() and clk_disable()   Jassi Brar
• [PATCH] ARM: SAMSUNG: Bug fix spin_lock recursion in clk_enable() and clk_disable()   mhban
• [PATCH] ARM: SAMSUNG: Bug fix spin_lock recursion in clk_enable() and clk_disable()   Jaecheol Lee
• [PATCH] ARM: SAMSUNG: Fix on default of s3c24xx_uart_devs   Jaecheol Lee
• [PATCH] ARM: SAMSUNG: Fix on default of s3c24xx_uart_devs   Marek Szyprowski
• [PATCH] ARM: SAMSUNG: Fix warning 's3c_pm_show_resume_irqs' defined but not used   Maurus Cuelenaere
• [PATCH] ARM: vic: fix support for PL192   Jocelyn Falempe
• [PATCH] AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family   Nicolas Ferre
• [PATCH] babbage: esdhc device registration   Shawn Guo
• [PATCH] babbage: esdhc device registration   Amit Kucheria
• [PATCH] cpufreq for freescale mx51   Yong Shen
• [PATCH] cpufreq for freescale mx51   Amit Kucheria
• [PATCH] cpufreq for freescale mx51   yong.shen at linaro.org
• [PATCH] cpufreq for freescale mx51   Arnd Bergmann
• [PATCH] cpufreq for freescale mx51   Yong Shen
• [PATCH] cpufreq for freescale mx51   Sascha Hauer
• [PATCH] cpufreq for freescale mx51   Arnd Bergmann
• [PATCH] cpufreq for freescale mx51   Yong Shen
• [PATCH] cpufreq for freescale mx51   Yong Shen
• [PATCH] cpufreq for freescale mx51   yong.shen at linaro.org
• [PATCH] cpufreq for freescale mx51   Sascha Hauer
• [PATCH] cpufreq for freescale mx51   Amit Kucheria
• [PATCH] cpufreq for freescale mx51   Sascha Hauer
• [PATCH] cpufreq for freescale mx51   Amit Kucheria
• [PATCH] cpufreq for freescale mx51   Yong Shen
• [PATCH] cpufreq for freescale mx51   Amit Kucheria
• [PATCH] cpufreq for freescale mx51   Yong Shen
• [PATCH] cpuimx25 & cpuimx35: fix OTG port registration in host mode   Eric Bénard
• [PATCH] davinci: Implement sched_clock()   Andreas.Gaer at baslerweb.com
• [PATCH] davinci: Implement sched_clock()   Kevin Hilman
• [PATCH] davinci: Implement sched_clock()   Sergei Shtylyov
• [PATCH] davinci: Implement sched_clock()   Kevin Hilman
• [PATCH] dma/coh901318: fix copy_to_user error path   Nicolas Kaiser
• [PATCH] dma/coh901318: fix copy_to_user error path   Arnd Bergmann
• [PATCH] dma/coh901318: use simple_read_from_buffer   Nicolas Kaiser
• [PATCH] dma/coh901318: use simple_read_from_buffer   Arnd Bergmann
• [PATCH] Documentation about RS485 serial communications   Claudio Scordino
• [PATCH] Documentation about RS485 serial communications   Grant Edwards
• [PATCH] Documentation about RS485 serial communications   Alexander Stein
• [PATCH] Documentation about RS485 serial communications   Grant Edwards
• [PATCH] Documentation about RS485 serial communications   Nicolas Ferre
• [PATCH] Documentation about RS485 serial communications   Alexander Stein
• [PATCH] Documentation about RS485 serial communications   Alan Cox
• [PATCH] Documentation about RS485 serial communications   Claudio Scordino
• [PATCH] Documentation about RS485 serial communications   Chris Down
• [PATCH] Documentation about RS485 serial communications   Claudio Scordino
• [PATCH] Documentation about RS485 serial communications   Chris Down
• [PATCH] EP93xx: Document DMA M2P API   Ryan Mallon
• [PATCH] EP93xx: Document DMA M2P API   Mika Westerberg
• [PATCH] EP93xx: Document DMA M2P API   Ryan Mallon
• [PATCH] EP93xx: Document DMA M2P API   Ryan Mallon
• [PATCH] EP93xx: Document DMA M2P API   Mika Westerberg
• [PATCH] eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free   Eric Bénard
• [PATCH] eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free   Fabio Estevam
• [PATCH] eukrea_mbimxsd: add support for DVI displays   Eric Bénard
• [PATCH] Fix AT91SAM9G20 reset   Nicolas Ferre
• [PATCH] Fix AT91SAM9G20 reset   Peter Horton
• [PATCH] Fixing ethernet driver compilation error for i.MX31 ADS board   Ian Lartey
• [PATCH] i.MX35: Add mx35_revision function to query the silicon revision   Uwe Kleine-König
• [PATCH] i.MX35: Add mx35_revision function to query the silicon revision   Sascha Hauer
• [PATCH] i.MX35: Add mx35_revision function to query the silicon revision   Sascha Hauer
• [PATCH] i.MX35: use the correct IIM register to get CPU revision   Eric Bénard
• [PATCH] i.MX35: use the correct IIM register to get CPU revision   Eric Bénard
• [PATCH] imx: only select HAVE_CAN_FLEXCAN if CAN is enabled   Uwe Kleine-König
• [PATCH] Input: Make ADS7846 independent on regulator   Linus Walleij
• [PATCH] Input: Make ADS7846 independent on regulator   Mark Brown
• [PATCH] kgdb,arm: fix register dump   Rabin Vincent
• [PATCH] kgdb,arm: fix register dump   Jason Wessel
• [PATCH] leds: leds-ns2: fix private driver data storage   Simon Guinot
• [PATCH] mach-cpuimx27: workaround USB PHY detection problem   Eric Bénard
• [PATCH] mach-pxa: sharpsl_pm: simplify conditional   Nicolas Kaiser
• [PATCH] merge all at91rm9200 defconfig in one single file   Eric Bénard
• [PATCH] merge all at91rm9200 defconfig in one single file   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] merge all at91rm9200 defconfig in one single file   Eric Bénard
• [PATCH] MMC: add support for the Marvell platform SDHCI controller   Mike Rapoport
• [PATCH] MMC: add support for the Marvell platform SDHCI controller   Saeed Bishara
• [PATCH] MMC: add support for the Marvell platform SDHCI controller   Chris Ball
• [PATCH] MMC: add support for the Marvell platform SDHCI controller   Mike Rapoport
• [PATCH] mmci: corrected calculation of clock div for ux500   Ulf Hansson
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: fix debug-macro.S build failure   Russell King - ARM Linux
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: fix debug-macro.S build failure   Russell King - ARM Linux
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: fix debug-macro.S build failure   Russell King - ARM Linux
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: fix debug-macro.S build failure   Russell King - ARM Linux
• [PATCH] msm: fix debug-macro.S build failure   Russell King - ARM Linux
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Russell King - ARM Linux
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Rohit Vaswani
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: fix debug-macro.S build failure   Russell King - ARM Linux
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: fix debug-macro.S build failure   Russell King - ARM Linux
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: fix debug-macro.S build failure   Nicolas Pitre
• [PATCH] msm: fix debug-macro.S build failure   Daniel Walker
• [PATCH] msm: Platform initialization for the IOMMU driver   Stepan Moskovchenko
• [PATCH] msm: timer: Decrease shift on timer clocksource   Jeff Ohlstein
• [PATCH] mx25/clocks: match esdhc-clocks to platform device   Wolfram Sang
• [PATCH] mx25: fix clock's calculation   Eric Bénard
• [PATCH] MX27 3ds: Add SDHC1 support to mx27 3ds   Rogerio Pimentel
• [PATCH] MX27 3ds: Add SDHC1 support to mx27 3ds   Sascha Hauer
• [PATCH] mx3: Enable PWM clock on mx31 and mx35   Fabio Estevam
• [PATCH] mx3: Enable PWM clock on mx31 and mx35   Eric Bénard
• [PATCH] mx3: Enable PWM clock on mx31 and mx35   Radoslav Kolev
• [PATCH] MX51 Babbage: Add Keypad support to MX51 Babbage   Rogerio Pimentel
• [PATCH] mx51: add resources for SD/MMC on i.MX51   Eric Bénard
• [PATCH] mx51: add resources for SD/MMC on i.MX51   Wolfram Sang
• [PATCH] mx51: add resources for SD/MMC on i.MX51   Eric Bénard
• [PATCH] mx51: add resources for SD/MMC on i.MX51   Wolfram Sang
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Peter Korsgaard
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Marc Kleine-Budde
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Uwe Kleine-König
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Baruch Siach
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Peter Korsgaard
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Peter Korsgaard
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Peter Korsgaard
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Sascha Hauer
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Peter Korsgaard
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Sascha Hauer
• [PATCH] mxc/gpio: make _set_value work with values != 0/1   Michał Nazarewicz
• [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35   Eric Bénard
• [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35   Eric Bénard
• [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35   Eric Bénard
• [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35   Greg KH
• [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35   Eric Bénard
• [PATCH] mxc_udc: add workaround for ENGcm09152 for i.MX35   Greg KH
• [PATCH] OMAP2+: Kconfig: disallow builds for boards that don't use the currently-selected SoC   Paul Walmsley
• [PATCH] OMAP2: PM: check UART status before trying to idle   Kevin Hilman
• [PATCH] OMAP2: PM: check UART status before trying to idle   Tony Lindgren
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Shilimkar, Santosh
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Varadarajan, Charulatha
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Kevin Hilman
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init   Cousson, Benoit
• [PATCH] omap3: Add minimal OMAP3 IGEP module support.   Enric Balletbo i Serra
• [PATCH] omap3: Add minimal OMAP3 IGEP module support.   Tony Lindgren
• [PATCH] omap3: Add minimal OMAP3 IGEP module support.   Enric Balletbò i Serra
• [PATCH] omap3: various code improvements for IGEP v2 board.   Enric Balletbo i Serra
• [PATCH] omap3: various code improvements for IGEP v2 board.   Felipe Balbi
• [PATCH] OMAP: hwmod: Handle modules with 16bit registers   Paul Walmsley
• [PATCH] OMAP: hwmod: Handle modules with 16bit registers   Kevin Hilman
• [PATCH] OMAP: UART: fix wakeup registers for OMAP24xx UART2   Kevin Hilman
• [PATCH] OMAP: UART: fix wakeup registers for OMAP24xx UART2   Tony Lindgren
• [PATCH] power: introduce library for device-specific OPPs   Nishanth Menon
• [PATCH] power: introduce library for device-specific OPPs   Rafael J. Wysocki
• [PATCH] power: introduce library for device-specific OPPs   Menon, Nishanth
• [PATCH] power: introduce library for device-specific OPPs   Kevin Hilman
• [PATCH] power: introduce library for device-specific OPPs   Menon, Nishanth
• [PATCH] pxafb: correct the vertical back porch macro   Matt Reimer
• [PATCH] pxafb: correct the vertical back porch macro   Eric Miao
• [PATCH] pxafb: correct the vertical back porch macro   Marek Vasut
• [PATCH] pxafb: correct the vertical back porch macro   Lothar Waßmann
• [PATCH] pxafb: correct the vertical back porch macro   Matt Reimer
• [PATCH] scatterlist: define SG chain for arm architecture   Fernando Guzman Lugo
• [PATCH] scatterlist: define SG chain for arm architecture   Russell King - ARM Linux
• [PATCH] scatterlist: define SG chain for arm architecture   Guzman Lugo, Fernando
• [PATCH] scatterlist: define SG chain for arm architecture   FUJITA Tomonori
• [PATCH] scatterlist: define SG chain for arm architecture   Russell King - ARM Linux
• [PATCH] scatterlist: define SG chain for arm architecture   FUJITA Tomonori
• [PATCH] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Eric Bénard
• [PATCH] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Wolfram Sang
• [PATCH] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Eric Bénard
• [PATCH] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Wolfram Sang
• [PATCH] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Chris Ball
• [PATCH] sdio: fix suspend/resume regression   Ohad Ben-Cohen
• [PATCH] sdio: fix suspend/resume regression   Vitaly Wool
• [PATCH] sdio: fix suspend/resume regression   Ohad Ben-Cohen
• [PATCH] sdio: fix suspend/resume regression   Vitaly Wool
• [PATCH] sdio: fix suspend/resume regression   Ohad Ben-Cohen
• [PATCH] sdio: fix suspend/resume regression   Nicolas Pitre
• [PATCH] sdio: fix suspend/resume regression   Nicolas Pitre
• [PATCH] sdio: fix suspend/resume regression   Chris Ball
• [PATCH] sdio: fix suspend/resume regression   Ohad Ben-Cohen
• [PATCH] sdio: fix suspend/resume regression   Ohad Ben-Cohen
• [PATCH] sdio: fix suspend/resume regression   Maxim Levitsky
• [PATCH] sdio: fix suspend/resume regression   Nicolas Pitre
• [PATCH] sdio: fix suspend/resume regression   Nicolas Pitre
• [PATCH] sdio: fix suspend/resume regression   Maxim Levitsky
• [PATCH] sdio: fix suspend/resume regression   Ohad Ben-Cohen
• [PATCH] sdio: fix suspend/resume regression   Maxim Levitsky
• [PATCH] sdio: fix suspend/resume regression   Ohad Ben-Cohen
• [PATCH] serial/imx: check that the buffer is non-empty before sending it out   Daniel Mack
• [PATCH] serial/imx: check that the buffer is non-empty before sending it out   Greg KH
• [PATCH] serial/imx: check that the buffer is non-empty before sending it out   Uwe Kleine-König
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Tony Lindgren
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Tony Lindgren
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Tony Lindgren
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Tony Lindgren
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Tony Lindgren
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Tony Lindgren
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Tony Lindgren
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Arnd Bergmann
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Arnd Bergmann
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Arnd Bergmann
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Arnd Bergmann
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Daniel Walker
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Russell King - ARM Linux
• [PATCH] serial: DCC(JTAG) serial and console emulation support   Nicolas Pitre
• [PATCH] spi/pl022: fix dubious allocation staticize platform data   Linus Walleij
• [PATCH] spi/pl022: fix dubious allocation staticize platform data   Grant Likely
• [PATCH] spi/pl022: fix erroneous platform data in U300   Linus Walleij
• [PATCH] spi/pl022: get rid of chipinfo dev pointer   Linus Walleij
• [PATCH] spi/pl022: get rid of chipinfo dev pointer   Linus Walleij
• [PATCH] spi/pl022: get rid of chipinfo dev pointer   Grant Likely
• [PATCH] spi/pl022: make sure the chip_info dev pointer is set   Linus Walleij
• [PATCH] spi: amba_pl022: Add spi->mode support to AMBA SPI driver   Grant Likely
• [PATCH] support for SDMA memory to memory transfers   Wirtl, Tobias
• [PATCH] support for SDMA memory to memory transfers   Linus Walleij
• [PATCH] ulpi: add i.MX25 & 35 internal PHY ID   Eric Bénard
• [PATCH] ulpi: add i.MX25 & 35 internal PHY ID   Sergei Shtylyov
• [PATCH] ulpi: add i.MX25 & 35 internal PHY ID   Igor Grinberg
• [PATCH] ulpi: add i.MX25 & 35 internal PHY ID   Daniel Mack
• [PATCH] ulpi: add i.MX25 & 35 internal PHY ID   Igor Grinberg
• [PATCH] ulpi: add i.MX25 & 35 internal PHY ID   Eric Bénard
• [PATCH] ulpi: add i.MX25 & 35 internal PHY ID   Igor Grinberg
• [PATCH] ulpi: add i.MX25 & 35 internal PHY ID   Eric Bénard
• [PATCH] ux500: The platform is not just based on early drop silicon version.   Srinidhi KASAGAR
• [PATCHv2 0/1] Add initial support for OMAP3 IGEP module   Enric Balletbo i Serra
• [PATCHv2 0/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Evgeny Kuznetsov
• [PATCHv2 0/2] mxc: mx51: Add support for efikamx nettop   Amit Kucheria
• [PATCHv2 0/3] ARM: Fixing udelay() for SMP and non-SMP systems   Stephen Boyd
• [PATCHv2 0/3] OMAP: McBSP: Fixes and cleanups after SCM conversion   Jarkko Nikula
• [PATCHv2 0/3] OMAP: McBSP: Fixes and cleanups after SCM conversion   Peter Ujfalusi
• [PATCHv2 0/3] Various code improvements for IGEP v2 board.   Enric Balletbo i Serra
• [PATCHv2 0/4] ASoC AC97 audio support for ep93xx   Mika Westerberg
• [PATCHv2 0/7] PWM core driver for pwm based led and backlight driver   Kevin Hilman
• [PATCHv2 0/7] PWM core driver for pwm based led and backlight driver   Arun MURTHY
• [PATCHv2 0/7] PWM core driver for pwm based led and backlight driver   Arun Murthy
• [PATCHv2 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Evgeny Kuznetsov
• [PATCHv2 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Varadarajan, Charulatha
• [PATCHv2 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Evgeny Kuznetsov
• [PATCHv2 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Varadarajan, Charulatha
• [PATCHv2 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Evgeny Kuznetsov
• [PATCHv2 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Evgeny Kuznetsov
• [PATCHv2 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Tony Lindgren
• [PATCHv2 1/2] ARM: imx: Add wake functionality to GPIO   Dinh.Nguyen at freescale.com
• [PATCHv2 1/2] mx51: Move OTG initialisation for all boards to a single file   Sascha Hauer
• [PATCHv2 1/2] mx51: Move OTG initialisation for all boards to a single file   Amit Kucheria
• [PATCHv2 1/3] ARM: Translate delay.S into (mostly) C   Stephen Boyd
• [PATCHv2 1/3] omap3: IGEP v2: Remove onenand_setup no-op function.   Enric Balletbo i Serra
• [PATCHv2 1/3] OMAP: McBSP: Fix CLKR and FSR signal muxing   Jarkko Nikula
• [PATCHv2 1/4] ARM: ep93xx: DMA: fix channel_disable   Mika Westerberg
• [PATCHv2 1/4] caif-u5500: Adding shared memory include   Sjur Braendeland
• [PATCHv2 1/4] caif-u5500: Adding shared memory include   David Miller
• [PATCHv2 1/6] ARM: S3C64XX: I2S: Upgrade platform device   Jassi Brar
• [PATCHv2 1/7] pwm: Add pwm core driver   Arun Murthy
• [PATCHv2 1/7] pwm: Add pwm core driver   Andrew Morton
• [PATCHv2 1/7] pwm: Add pwm core driver   Arun MURTHY
• [PATCHv2 1/7] pwm: Add pwm core driver   Kevin Hilman
• [PATCHv2 2/2] ARM: imx: Add gpio-keys to mx51 babbage board   Dinh.Nguyen at freescale.com
• [PATCHv2 2/2] ARM: imx: Add gpio-keys to mx51 babbage board   Uwe Kleine-König
• [PATCHv2 2/2] mx51: add support for genesi efikamx nettop   Amit Kucheria
• [PATCHv2 2/3] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCHv2 2/3] omap3: IGEP v2: Remove igep2_config array.   Enric Balletbo i Serra
• [PATCHv2 2/3] OMAP: McBSP: Swap CLKS source definition   Jarkko Nikula
• [PATCHv2 2/4] ASoC: add ep93xx AC97 audio driver   Mika Westerberg
• [PATCHv2 2/4] caif-u5500: CAIF shared memory transport protocol   Sjur Braendeland
• [PATCHv2 2/4] caif-u5500: CAIF shared memory transport protocol   David Miller
• [PATCHv2 2/6] ARM: S5P64X0: I2S: Upgrade platform device   Jassi Brar
• [PATCHv2 2/7] backlight:pwm: add an element 'name' to platform data   Arun Murthy
• [PATCHv2 3/3] ARM: Implement a timer based __delay() loop   Stephen Boyd
• [PATCHv2 3/3] OMAP: McBSP: Remove null omap44xx ops comment   Jarkko Nikula
• [PATCHv2 3/4] ARM: ep93xx: add AC97 platform support   Mika Westerberg
• [PATCHv2 3/4] caif-u5500: CAIF shared memory mailbox interface   Sjur Braendeland
• [PATCHv2 3/4] caif-u5500: CAIF shared memory mailbox interface   David Miller
• [PATCHv2 3/6] ARM: S5P6442: I2S: Upgrade platform device   Jassi Brar
• [PATCHv2 3/7] leds: pwm: add a new element 'name' to platform data   Arun Murthy
• [PATCHv2 4/4] ASoC: ep93xx: add Simplemachines Sim.One AC97 audio support   Mika Westerberg
• [PATCHv2 4/4] caif-u5500: Build config for CAIF shared mem driver   Sjur Braendeland
• [PATCHv2 4/4] caif-u5500: Build config for CAIF shared mem driver   David Miller
• [PATCHv2 4/6] ARM: S5PC100: I2S: Upgrade platform device   Jassi Brar
• [PATCHv2 4/7] pwm: Align existing pwm drivers with pwm-core driver   Arun Murthy
• [PATCHv2 5/6] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCHv2 5/7] platform: Update the pwm based led and backlight platform data   Arun Murthy
• [PATCHv2 6/6] ARM: S5PV310: Add audio platform devices   Jassi Brar
• [PATCHv2 6/7] pwm: move existing pwm driver to drivers/pwm   Arun Murthy
• [PATCHv2 7/7] pwm: Modify backlight and led Kconfig aligning to pwm core   Arun Murthy
• [PATCHv2] cpufreq for freescale mx51   yong.shen at linaro.org
• [PATCHv2] cpufreq for freescale mx51   Yong Shen
• [PATCHv2] cpufreq for freescale mx51   Amit Kucheria
• [PATCHv2] cpufreq for freescale mx51   Sascha Hauer
• [PATCHv2] cpufreq for freescale mx51   Yong Shen
• [PATCHv2] cpufreq for freescale mx51   Yong Shen
• [PATCHv2] cpufreq for freescale mx51   Sascha Hauer
• [PATCHv2] cpufreq for freescale mx51   Yong Shen
• [PATCHv2] cpufreq for freescale mx51   Sascha Hauer
• [PATCHv2] cpufreq for freescale mx51   Yong Shen
• [PATCHv2] mmci: work with only one irq   Rabin Vincent
• [PATCHv2] mmci: work with only one irq   Linus Walleij
• [PATCHv2] mmci: work with only one irq   Russell King - ARM Linux
• [PATCHv2] mmci: work with only one irq   Linus Walleij
• [PATCHv2] mmci: work with only one irq   Linus Walleij
• [PATCHv2] mxc/gpio: make _set_value work with values != 0/1   Peter Korsgaard
• [PATCHv2] omap3: Add minimal OMAP3 IGEP module support.   Enric Balletbo i Serra
• [PATCHv2] omap3: Add minimal OMAP3 IGEP module support.   Laurent Pinchart
• [PATCHv3 0/1] Add initial support for OMAP3 IGEP module   Enric Balletbo i Serra
• [PATCHv3 0/6] omap3: Various fixes and improvements for IGEP v2 board.   Enric Balletbo i Serra
• [PATCHv3 0/7] PWM core driver for pwm based led and backlight driver   Bill Gatliff
• [PATCHv3 0/7] PWM core driver for pwm based led and backlight driver   Arun Murthy
• [PATCHv3 1/1] omap3: Add minimal OMAP3 IGEP module support.   Enric Balletbo i Serra
• [PATCHv3 1/1] omap3: Add minimal OMAP3 IGEP module support.   Tony Lindgren
• [PATCHv3 1/2] ARM: imx: Add gpio-keys to mx51 babbage board   Dinh.Nguyen at freescale.com
• [PATCHv3 1/2] ARM: imx: Add gpio-keys to mx51 babbage board   Uwe Kleine-König
• [PATCHv3 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.   David Cohen
• [PATCHv3 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.   Enric Balletbò i Serra
• [PATCHv3 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.   David Cohen
• [PATCHv3 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.   Enric Balletbò i Serra
• [PATCHv3 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.   Enric Balletbo i Serra
• [PATCHv3 1/7] pwm: Add pwm core driver   Arun Murthy
• [PATCHv3 2/2] ARM: imx: Add wake functionality to GPIO   Dinh.Nguyen at freescale.com
• [PATCHv3 2/2] ARM: imx: Add wake functionality to GPIO   Uwe Kleine-König
• [PATCHv3 2/6] omap3: fix and improve the LED handling on IGEP v2 board.   Enric Balletbo i Serra
• [PATCHv3 2/7] backlight:pwm: add an element 'name' to platform data   Arun Murthy
• [PATCHv3 3/3] omap3: IGEP v2: Improve igep2_flash_init() function.   Enric Balletbo i Serra
• [PATCHv3 3/6] omap3: Introduce function to detect the IGEP v2 hardware revision.   Enric Balletbo i Serra
• [PATCHv3 3/7] leds: pwm: add a new element 'name' to platform data   Arun Murthy
• [PATCHv3 4/6] omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2.   Enric Balletbo i Serra
• [PATCHv3 4/7] pwm: Align existing pwm drivers with pwm-core driver   Arun Murthy
• [PATCHv3 5/6] omap3: Add i2c eeprom driver to read EDID on IGEP v2.   Enric Balletbo i Serra
• [PATCHv3 5/7] platform: Update the pwm based led and backlight platform data   Arun Murthy
• [PATCHv3 6/6] omap3: Remove VMMC2 regulator on IGEP v2.   Enric Balletbo i Serra
• [PATCHv3 6/7] pwm: move existing pwm driver to drivers/pwm   Arun Murthy
• [PATCHv3 7/7] pwm: Modify backlight and led Kconfig aligning to pwm core   Arun Murthy
• [PATCHv3] ARM: imx: Add iram allocator functions   Dinh.Nguyen at freescale.com
• [PATCHv3] ARM: imx: Add iram allocator functions   Linus Walleij
• [PATCHv3] ARM: imx: Add iram allocator functions   Uwe Kleine-König
• [PATCHv3] ARM: imx: Add iram allocator functions   Sascha Hauer
• [PATCHv3] ARM: imx: Add iram allocator functions   Nguyen Dinh-R00091
• [PATCHv3] cpufreq for freescale mx51   yong.shen at linaro.org
• [PATCHv3] cpufreq for freescale mx51   Amit Kucheria
• [PATCHv3] cpufreq for freescale mx51   Sascha Hauer
• [PATCHv3] cpufreq for freescale mx51   Yong Shen
• [PATCHv3] cpufreq for freescale mx51   Yong Shen
• [PATCHv3] cpufreq for freescale mx51   Yong Shen
• [PATCHv3] cpufreq for freescale mx51   Sascha Hauer
• [PATCHv4 0/6] omap3: Various fixes and improvements for IGEP v2 board.   Tony Lindgren
• [PATCHv4 0/6] omap3: Various fixes and improvements for IGEP v2 board.   Enric Balletbo i Serra
• [PATCHv4 1/2] ARM: imx: Add gpio-keys to mx51 babbage board   Dinh.Nguyen at freescale.com
• [PATCHv4 1/2] ARM: imx: Add gpio-keys to mx51 babbage board   Uwe Kleine-König
• [PATCHv4 1/2] ARM: imx: Add gpio-keys to mx51 babbage board   Amit Kucheria
• [PATCHv4 1/2] ARM: imx: Add gpio-keys to mx51 babbage board   Nguyen Dinh-R00091
• [PATCHv4 1/2] ARM: imx: Add gpio-keys to mx51 babbage board   Arnaud Patard (Rtp)
• [PATCHv4 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.   Enric Balletbo i Serra
• [PATCHv4 2/2] ARM: imx: Add wake functionality to GPIO   Dinh.Nguyen at freescale.com
• [PATCHv4 2/2] ARM: imx: Add wake functionality to GPIO   Uwe Kleine-König
• [PATCHv4 2/2] ARM: imx: Add wake functionality to GPIO   Nguyen Dinh-R00091
• [PATCHv4 2/6] omap3: fix and improve the LED handling on IGEP v2 board.   Enric Balletbo i Serra
• [PATCHv4 3/6] omap3: Introduce function to detect the IGEP v2 hardware revision.   Enric Balletbo i Serra
• [PATCHv4 4/6] omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2.   Enric Balletbo i Serra
• [PATCHv4 5/6] omap3: Add i2c eeprom driver to read EDID on IGEP v2.   Enric Balletbo i Serra
• [PATCHv4 6/6] omap3: Remove VMMC2 regulator on IGEP v2.   Enric Balletbo i Serra
• [PATCHv4] ARM: imx: Add iram allocator functions   Dinh.Nguyen at freescale.com
• [PATCHv4] ARM: imx: Add iram allocator functions   Uwe Kleine-König
• [PATCHv4] ARM: imx: Add iram allocator functions   Lothar Waßmann
• [PATCHv5 0/4] omap: iovmm - fixes for iovmm module   Fernando Guzman Lugo
• [PATCHv5 1/3] ARM: mx5: Add gpio-keys to mx51 babbage board   Dinh.Nguyen at freescale.com
• [PATCHv5 1/3] ARM: mx5: Add gpio-keys to mx51 babbage board   Amit Kucheria
• [PATCHv5 1/4] omap: iovmm - no gap checking for fixed address   Fernando Guzman Lugo
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Dinh.Nguyen at freescale.com
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Uwe Kleine-König
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Nguyen Dinh-R00091
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Uwe Kleine-König
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Nguyen Dinh-R00091
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Lothar Waßmann
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Uwe Kleine-König
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Lothar Waßmann
• [PATCHv5 2/3] ARM: imx: Add gpio-keys to plat-mxc   Uwe Kleine-König
• [PATCHv5 2/4] omap: iovmm - add superpages support to fixed da address   Fernando Guzman Lugo
• [PATCHv5 3/3] ARM: imx: Add wake functionality to GPIO   Dinh.Nguyen at freescale.com
• [PATCHv5 3/4] omap: iovmm - replace __iounmap with omap_iounmap   Fernando Guzman Lugo
• [PATCHv5 4/4] omap: iommu - create new api to set valid da range   Fernando Guzman Lugo
• [PATCHv5] ARM: imx: Add iram allocator functions   Dinh.Nguyen at freescale.com
• [PATCHv5] ARM: imx: Add iram allocator functions   Uwe Kleine-König
• [PATCHv5] cpufreq for freescale mx51   yong.shen at linaro.org
• [PATCHv5] cpufreq for freescale mx51   Amit Kucheria
• [PATCHv6 1/3] ARM: imx: Add gpio-keys to plat-mxc   Dinh.Nguyen at freescale.com
• [PATCHv6 1/3] ARM: imx: Add gpio-keys to plat-mxc   Eric Bénard
• [PATCHv6 1/3] ARM: imx: Add gpio-keys to plat-mxc   Uwe Kleine-König
• [PATCHv6 1/3] ARM: imx: Add gpio-keys to plat-mxc   Eric Bénard
• [PATCHv6 1/3] ARM: imx: Add gpio-keys to plat-mxc   Uwe Kleine-König
• [PATCHv6 2/3] ARM: mx5: Add gpio-keys to mx51 babbage board   Dinh.Nguyen at freescale.com
• [PATCHv6 2/3] ARM: mx5: Add gpio-keys to mx51 babbage board   Eric Bénard
• [PATCHv6 3/3] ARM: imx: Add wake functionality to GPIO   Dinh.Nguyen at freescale.com
• [PATCHv6] ARM: imx: Add iram allocator functions   Dinh.Nguyen at freescale.com
• [PATCHv6] ARM: imx: Add iram allocator functions   Lothar Waßmann
• [PATCHv7 1/3] ARM: imx: Add gpio-keys to plat-mxc   Dinh.Nguyen at freescale.com
• [PATCHv7 2/3] ARM: mx5: Add gpio-keys to mx51 babbage board   Dinh.Nguyen at freescale.com
• [PATCHv7 3/3] ARM: imx: Add wake functionality to GPIO   Dinh.Nguyen at freescale.com
• [PATCHv7] ARM: imx: Add iram allocator functions   Dinh.Nguyen at freescale.com
• [PATCHv7] ARM: imx: Add iram allocator functions   Uwe Kleine-König
• [RESEND PATCH] serial: samsung: fix device name   Darius Augulis
• [RFC 1/2] mmc: sdhci-esdhc-imx: add support for write protect on custom GPIO   Wolfram Sang
• [RFC 2/2] arm: mach-mx3: pcm043: add write-protect-pin for SDHC   Wolfram Sang
• [RFC arm-kernel 0/4] caif-u5500: CAIF shared memory/mailbox driver   Sjur Braendeland
• [RFC arm-kernel 1/4] caif-u5500: Adding shared memory include   Sjur Braendeland
• [RFC arm-kernel 2/4] caif-u5500: CAIF shared memory transport protocol   Sjur Braendeland
• [RFC arm-kernel 3/4] caif-u5500: CAIF shared memory mailbox interface   Sjur Braendeland
• [RFC arm-kernel 4/4] caif-u5500: Build config for CAIF shared mem driver   Sjur Braendeland
• [RFC PATCH 0/2] SL351x (Gemini) ethernet driver   Michał Mirosław
• [RFC PATCH 0/2] SL351x (Gemini) ethernet driver   Paulius Zaleckas
• [RFC PATCH 00/18] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
• [RFC PATCH 01/18] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
• [RFC PATCH 02/18] ARM: LPAE: Factor out 2-level page table definitions into separate files   Catalin Marinas
• [RFC PATCH 03/18] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [RFC PATCH 04/18] ARM: LPAE: Do not assume Linux PTEs are always at PTRS_PER_PTE offset   Catalin Marinas
• [RFC PATCH 05/18] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [RFC PATCH 06/18] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [RFC PATCH 06/18] ARM: LPAE: Introduce the 3-level page table format definitions   Arnd Bergmann
• [RFC PATCH 06/18] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [RFC PATCH 06/18] ARM: LPAE: Introduce the 3-level page table format definitions   Arnd Bergmann
• [RFC PATCH 06/18] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [RFC PATCH 06/18] ARM: LPAE: Introduce the 3-level page table format definitions   Arnd Bergmann
• [RFC PATCH 07/18] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [RFC PATCH 08/18] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [RFC PATCH 09/18] ARM: LPAE: Add fault handling support   Catalin Marinas
• [RFC PATCH 09/18] ARM: LPAE: Add fault handling support   Kirill A. Shutemov
• [RFC PATCH 09/18] ARM: LPAE: Add fault handling support   Catalin Marinas
• [RFC PATCH 1/2] Gemini: create platform device for ethernet in Raidsonic IB-4220B   Michał Mirosław
• [RFC PATCH 1/2] Gemini: create platform device for ethernet in Raidsonic IB-4220B   Paulius Zaleckas
• [RFC PATCH 10/18] ARM: LPAE: Add context switching support   Catalin Marinas
• [RFC PATCH 11/18] ARM: LPAE: Add SMP support for the 3-level page table format   Catalin Marinas
• [RFC PATCH 12/18] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Catalin Marinas
• [RFC PATCH 13/18] ARM: LPAE: ensure dma_addr_t is the same size as phys_addr_t   Catalin Marinas
• [RFC PATCH 13/18] ARM: LPAE: ensure dma_addr_t is the same size as phys_addr_t   FUJITA Tomonori
• [RFC PATCH 13/18] ARM: LPAE: ensure dma_addr_t is the same size as phys_addr_t   Catalin Marinas
• [RFC PATCH 13/18] ARM: LPAE: ensure dma_addr_t is the same size as phys_addr_t   Arnd Bergmann
• [RFC PATCH 13/18] ARM: LPAE: ensure dma_addr_t is the same size as phys_addr_t   Catalin Marinas
• [RFC PATCH 14/18] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Catalin Marinas
• [RFC PATCH 15/18] ARM: LPAE: use phys_addr_t for physical start address in early_mem   Catalin Marinas
• [RFC PATCH 16/18] ARM: LPAE: add support for ATAG_MEM64   Catalin Marinas
• [RFC PATCH 17/18] ARM: LPAE: define printk format for physical addresses and page table entries   Catalin Marinas
• [RFC PATCH 17/18] ARM: LPAE: define printk format for physical addresses and page table entries   Kirill A. Shutemov
• [RFC PATCH 18/18] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [RFC PATCH 2/2] Gemini: SL351x Ethernet driver   Michał Mirosław
• [RFC PATCH] arm: msm: moved Kconfig machine entry into mach-msm   Daniel Walker
• [RFC PATCH] arm: msm: moved Kconfig machine entry into mach-msm   Russell King - ARM Linux
• [RFC PATCH] arm: msm: moved Kconfig machine entry into mach-msm   Daniel Walker
• [RFC PATCH] arm: msm: moved Kconfig machine entry into mach-msm   Russell King - ARM Linux
• [rfc v3 1/2] ARM: Add zboot support for SuperH Mobile ARM   Magnus Damm
• [RFC, PATCH 0/5] unify definition of CLOCK_TICK_RATE across different platforms   Kevin Hilman
• [RFC, PATCH 0/5] unify definition of CLOCK_TICK_RATE across different platforms   Eric Miao
• [RFC, PATCH 0/5] unify definition of CLOCK_TICK_RATE across different platforms   Linus Walleij
• [RFC, PATCH 0/5] unify definition of CLOCK_TICK_RATE across different platforms   Lennert Buytenhek
• [RFC/PATCH 0/2] OMAP: PM: add "early" idle notifier chain   Kevin Hilman
• [RFC/PATCH 1/2] OMAP: PM: add "early" idle notifications   Kevin Hilman
• [RFC/PATCH 2/2] OMAP3: CPUidle: trigger early idle notification call chain   Sripathy, Vishwanath
• [RFC/PATCH 2/2] OMAP3: CPUidle: trigger early idle notification call chain   Kevin Hilman
• [RFC/PATCH 2/2] OMAP3: CPUidle: trigger early idle notification call chain   Kevin Hilman
• [RFC/PATCH 2/2] OMAP3: CPUidle: trigger early idle notification call chain   Kevin Hilman
• [RFC] [PATCH] XCHGADD ARM implementation   Ashwin Chaugule
• [RFC] change the dma_unmap_single for arm   saeed bishara
• [RFC] change the dma_unmap_single for arm   Russell King - ARM Linux
• [RFC] change the dma_unmap_single for arm   Nicolas Pitre
• [RFC] change the dma_unmap_single for arm   Russell King - ARM Linux
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Eric Miao
• [RFC] Removal of dead code from arch/arm/*   N.P.S.
• [RFC] Removal of dead code from arch/arm/*   Eric Miao
• [RFC] Removal of dead code from arch/arm/*   Russell King - ARM Linux
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Uwe Kleine-König
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Michał Mirosław
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] Removal of dead code from arch/arm/*   Michał Mirosław
• [RFC] Removal of dead code from arch/arm/*   Zimny Lech
• [RFC] tidspbridge: use a parameter to allocate shared memory   Omar Ramirez Luna
• [RFC] tidspbridge: use a parameter to allocate shared memory   Laurent Pinchart
• [RFC] tidspbridge: use a parameter to allocate shared memory   Russell King - ARM Linux
• [RFC] tidspbridge: use a parameter to allocate shared memory   Laurent Pinchart
• [RFC] tidspbridge: use a parameter to allocate shared memory   Omar Ramirez Luna
• [RFC] tidspbridge: use a parameter to allocate shared memory   Omar Ramirez Luna
• [RFC] tidspbridge: use a parameter to allocate shared memory   Felipe Contreras
• [RFC] tidspbridge: use a parameter to allocate shared memory   Russell King - ARM Linux
• [RFC] tidspbridge: use a parameter to allocate shared memory   Omar Ramirez Luna
• [RFC] tidspbridge: use a parameter to allocate shared memory   Felipe Contreras
• [RFC] tidspbridge: use a parameter to allocate shared memory   Felipe Contreras
• [RFC] tidspbridge: use a parameter to allocate shared memory   Omar Ramirez Luna
• [RFC] tidspbridge: use a parameter to allocate shared memory   Omar Ramirez Luna
• [RFC][PATCH 0/3] big chunk memory allocator v2   Minchan Kim
• [RFC][PATCH 0/3] big chunk memory allocator v2   Michał Nazarewicz
• [RFC][PATCH 0/3] big chunk memory allocator v2   Andi Kleen
• [RFC][PATCH 0/3] big chunk memory allocator v2   KAMEZAWA Hiroyuki
• [RFC][PATCH 0/3] big chunk memory allocator v2   Andi Kleen
• [RFC][PATCH 0/3] big chunk memory allocator v2   KAMEZAWA Hiroyuki
• [RFC][PATCH 0/3] big chunk memory allocator v2   Michał Nazarewicz
• [RFC][PATCH 0/3] big chunk memory allocator v2   Minchan Kim
• [RFC][PATCH 0/3] big chunk memory allocator v2   Andi Kleen
• [RFC][PATCH 0/3] big chunk memory allocator v2   Michał Nazarewicz
• [rtc-linux] RE: [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Andrew Morton
• [rtc-linux] RE: [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Kukjin Kim
• [rtc-linux] RE: [PATCH 5/5] rtc: rtc-s3c: Fix debug message format on RTC   Kukjin Kim
• [stable] Patch Upstream: oprofile, ARM: Release resources on failure   Greg KH
• Add Mindspeed Comcerto platform support   stanleymiao at gmail.com
• Add Mindspeed Comcerto platform support   Stanley.Miao
• Add Mindspeed Comcerto platform support   Russell King - ARM Linux
• Add Mindspeed Comcerto platform support   Stanley.Miao
• ARM: "undefined reference to `wrong_size_cmpxchg'"   Aras Vaichas
• AT91: Fix power-saving in idle-mode on 926T processors   Anders Larsen
• AT91: Fix power-saving in idle-mode on 926T processors   Jean-Christophe PLAGNIOL-VILLARD
• AT91: Fix power-saving in idle-mode on 926T processors   Nicolas Ferre
• at91: input overruns question   Aras Vaichas
• at91: input overruns question   Uwe Kleine-König
• at91: input overruns question   Aras Vaichas
• at91: input overruns question   Aras Vaichas
• at91: input overruns question   Remy Bohmer
• at91sam9g20 hangs at ohci-hcd   Dennis Borgmann
• at91sam9g20 hangs at ohci-hcd   Jean-Christophe PLAGNIOL-VILLARD
• at91sam9g20 hangs at ohci-hcd   Dennis Borgmann
• atmel_serial: fix RTS high after initialization in RS485 mode   Claudio Scordino
• atmel_serial: fix RTS high after initialization in RS485 mode   Andrew Morton
• boot decompressor code error   Brian Murphy
• boot decompressor code error   Russell King - ARM Linux
• boot decompressor code error   Uwe Kleine-König
• BUG: spinlock recursion on CPU#0   Alexander Stein
• BUG: spinlock recursion on CPU#0   Mika Westerberg
• cmpxchg() in recent kernels   Alex Sverdlin
• cmpxchg() in recent kernels   Aras Vaichas
• cmpxchg() in recent kernels   Kristoffer Ericson
• cmpxchg() in recent kernels   Russell King - ARM Linux
• cmpxchg() in recent kernels   Aras Vaichas
• cmpxchg() in recent kernels   Uwe Kleine-König
• cmpxchg() in recent kernels   Russell King - ARM Linux
• cmpxchg() in recent kernels   Kristoffer Ericson
• cmpxchg() in recent kernels   Alexander Sverdlin
• cmpxchg() in recent kernels   Aras Vaichas
• cmpxchg() in recent kernels   Uwe Kleine-König
• cmpxchg() in recent kernels   Aras Vaichas
• cpufreq for freescale mx51   yong.shen at linaro.org
• ep93xx/ts72xx: Kernel 2.6.36 problems introduced with commit 5bc23d32d   Russell King - ARM Linux
• ep93xx/ts72xx: Kernel 2.6.36 problems introduced with commit 5bc23d32d   Petr Štetiar
• ep93xx/ts72xx: Kernel 2.6.36 problems introduced with commit 5bc23d32d   Petr Štetiar
• ep93xx/ts72xx: Kernel 2.6.36 problems introduced with commit 5bc23d32d   Russell King - ARM Linux
• ep93xx/ts72xx: Kernel 2.6.36 problems introduced with commit 5bc23d32d   Petr Štetiar
• ep93xx/ts72xx: Kernel 2.6.36 problems introduced with commit 5bc23d32d   Petr Štetiar
• FW: [PATCH 05/11] omap3: Remove non-existent config option   Marathe, Yogesh
• GIT pull request: arm: lpc32xx_up1   Russell King - ARM Linux
• Git pull request: core features and fixes for next merge window   Nicolas Pitre
• Git pull request: Kirkwood updates for next merge window   Nicolas Pitre
• Git pull request: last bits for Kirkwood   Nicolas Pitre
• Git pull request: last bits for Kirkwood   Russell King - ARM Linux
• Git pull request: last bits for Kirkwood   Nicolas Pitre
• Git pull request: last bits for Kirkwood   Anca Emanuel
• Git pull request: last bits for Kirkwood   Nicolas Pitre
• hda interrupt timeouts on sa1110 + sa1111 board   Kristoffer Ericson
• hda interrupt timeouts on sa1110 + sa1111 board   Russell King - ARM Linux
• hda interrupt timeouts on sa1110 + sa1111 board   Kristoffer Ericson
• High Latency in PL310 L2 cache maintenance operations   hashim alig
• i.MX pull request for -rc   Sascha Hauer
• I.MX35 GPIO IRQ + Preempt -> Oops   Eric Bénard
• I.MX35 GPIO IRQ + Preempt -> Oops   Russell King - ARM Linux
• I.MX35 GPIO IRQ + Preempt -> Oops   Eric Bénard
• I.MX35 GPIO IRQ + Preempt -> Oops   Russell King - ARM Linux
• I.MX35 GPIO IRQ + Preempt -> Oops   Eric Bénard
• I.MX35 GPIO IRQ + Preempt -> Oops   Uwe Kleine-König
• I.MX35 GPIO IRQ + Preempt -> Oops   Eric Bénard
• I.MX35 GPIO IRQ + Preempt -> Oops   Eric Bénard
• I.MX35 GPIO IRQ + Preempt -> Oops   Marc Reilly
• I.MX35 GPIO IRQ + Preempt -> Oops   Eric Bénard
• I.MX35 GPIO IRQ + Preempt -> Oops   Eric Bénard
• imx-for-2.6.37 broken [Was: [PATCH 2/4] eukrea_mbimxsd for cpuimx35: add CAN & SDCard support]   Uwe Kleine-König
• imx: PWM module on mx35   Radoslav Kolev
• imx: PWM module on mx35   Fabio Estevam
• imx: PWM module on mx35   Radoslav Kolev
• Is ep93xx support broken in linux-next?   Alexander Sverdlin
• Is ep93xx support broken in linux-next?   Mika Westerberg
• Is ep93xx support broken in linux-next?   Mika Westerberg
• Is ep93xx support broken in linux-next?   Alexander Sverdlin
• Is ep93xx support broken in linux-next?   Mika Westerberg
• Is ep93xx support broken in linux-next?   Alexander Sverdlin
• Is ep93xx support broken in linux-next?   Russell King - ARM Linux
• Is ep93xx support broken in linux-next?   Mika Westerberg
• Is ep93xx support broken in linux-next?   Russell King - ARM Linux
• iwmmxt signal frame handling   Arnd Bergmann
• iwmmxt signal frame handling   Nicolas Pitre
• iwmmxt signal frame handling   Eric Miao
• iwmmxt signal frame handling   Eric Miao
• iwmmxt signal frame handling   Arnd Bergmann
• iwmmxt signal frame handling   Eric Miao
• iwmmxt signal frame handling   Nicolas Pitre
• iwmmxt signal frame handling   Nicolas Pitre
• iwmmxt signal frame handling   Arnd Bergmann
• iwmmxt signal frame handling   Haojian Zhuang
• Kirkwood DMA engine transfer to PCI memory space?   Wolfgang Wegner
• Kirkwood DMA engine transfer to PCI memory space?   Wolfgang Wegner
• Kirkwood DMA engine transfer to PCI memory space?   saeed bishara
• Kirkwood DMA engine transfer to PCI memory space?   Wolfgang Wegner
• Last call for new machine support   Russell King - ARM Linux
• Last call for new machine support   Kukjin Kim
• Last call for new machine support   Tony Lindgren
• linux hang on i.mx35 board, a sdma problem?   Alexander Stein
• linux hang on i.mx35 board, a sdma problem?   Fabio Estevam
• Linux kernel 2.6.28.10 failes when tried to mount JFFS filesystem   Naveen Atmakuri
• linux-next: omap2plus_defconfig does not build   Anand Gadiyar
• linux-next: omap2plus_defconfig does not build   Tony Lindgren
• linux-next: omap2plus_defconfig does not build   Gadiyar, Anand
• linux-next: omap2plus_defconfig not building   Anand Gadiyar
• linux-next: omap2plus_defconfig not building   Catalin Marinas
• linux-next: omap2plus_defconfig not building   Anand Gadiyar
• linux-next: omap2plus_defconfig not building   Tony Lindgren
• Machine name/id change request   Amit Kucheria
• missing definition of 's3c_gpio_getpull' function in 'plat-samsung'   Kukjin Kim
• missing definition of 's3c_gpio_getpull' function in 'plat-samsung'   Kukjin Kim
• missing definition of 's3c_gpio_getpull' function in 'plat-samsung'   Daein Moon
• multiple linux-next OMAP3 build errors   Grazvydas Ignotas
• multiple linux-next OMAP3 build errors   Anand Gadiyar
• multiple linux-next OMAP3 build errors   Tony Lindgren
• multiple linux-next OMAP3 build errors   Tomi Valkeinen
• multiple linux-next OMAP3 build errors   Gadiyar, Anand
• multiple linux-next OMAP3 build errors   Benjamin Herrenschmidt
• multiple linux-next OMAP3 build errors   Yinghai Lu
• multiple linux-next OMAP3 build errors   Yinghai Lu
• mx31: external abort on non-linefetch (debugging suspend to RAM)   Thomas Nemeth
• mx31: external abort on non-linefetch (debugging suspend to RAM)   Xinyu Chen
• mx31: external abort on non-linefetch (debugging suspend to RAM)   Thomas Nemeth
• mx35pdk lan911x support   Uwe Kleine-König
• mx35pdk lan911x support   Fabio Estevam
• mx35pdk lan911x support   xiao jiang
• mx35pdk lan911x support   Uwe Kleine-König
• mx35pdk lan911x support   xiao jiang
• MX3: compile breakage with next   Guennadi Liakhovetski
• MX3: compile breakage with next   Eric Bénard
• mx51 cpufreq driver   yong.shen at linaro.org
• mx51 cpufreq driver   yong.shen at linaro.org
• mxc: PWM on i.MX35   Hans J. Koch
• Mysterious SMC network device crash   Michael Abbott
• net{space,xbig} TCLK determination   Lennert Buytenhek
• net{space,xbig} TCLK determination   Simon Guinot
• net{space,xbig} TCLK determination   Lennert Buytenhek
• New Kirkwood board support   Nils Faerber
• New Kirkwood board support   Uwe Kleine-König
• New Kirkwood board support   Nils Faerber
• New Kirkwood board support   Nils Faerber
• New Kirkwood board support   Russell King - ARM Linux
• New Kirkwood board support   Uwe Kleine-König
• New Kirkwood board support   Nils Faerber
• No subject  
• No subject  
• No subject  
• No subject   Daein Moon
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• Own syscall implementation   Oleg Kutkov
• Own syscall implementation   Russell King - ARM Linux
• Own syscall implementation   Oleg Kutkov
• Own syscall implementation   Oleg Kutkov
• PATCH 3/6] n30: Clean up UARTs configuration   Jiří Pinkava
• PL310 and QoS logic   shiraz hashim
• PL310 and QoS logic   shiraz hashim
• PL310 and QoS logic   Catalin Marinas
• PL310 and QoS logic   shiraz hashim
• Please don't edit the subject. Use S5PC110 & S5PC210 as is   Kyungmin Park
• Problems with atmel_spi & ads7846 w/ hwmon enabled in 2.6.30   Zac Wheeler
• Pull request for i.MX   Sascha Hauer
• Pull request for i.MX   Baruch Siach
• Pull request for i.MX   Sascha Hauer
• Pull request for i.MX   Sascha Hauer
• Pull request for i.MX   Russell King - ARM Linux
• Pull request for i.MX   Sascha Hauer
• Pull request for next   Sascha Hauer
• PXA270 audio problem   Santhosh N
• PXA270 linux-2.6.35.7 boot hang   Santhosh N
• PXA270 linux-2.6.35.7 boot hang   Eric Miao
• PXA270 linux-2.6.35.7 boot hang   Dylan Cristiani
• PXA270 linux-2.6.35.7 boot hang   Marek Vasut
• PXA270 linux-2.6.35.7 boot hang   Santhosh N
• PXA270 Random Hangs at Low Core Freq   Michael Cashwell
• PXA270 Random Hangs at Low Core Freq   Marek Vasut
• PXA270 Random Hangs at Low Core Freq   Haojian Zhuang
• PXA270 Random Hangs at Low Core Freq   Michael Cashwell
• PXA270 Random Hangs at Low Core Freq   Eric Miao
• PXA270 Random Hangs at Low Core Freq   Marek Vasut
• PXA270 Random Hangs at Low Core Freq   Michael Cashwell
• PXA270 Random Hangs at Low Core Freq   Haojian Zhuang
• PXA270 Random Hangs at Low Core Freq   Marek Vasut
• PXA270 Random Hangs at Low Core Freq   Michael Cashwell
• pxa3xx_nand issues   pieterg
• pxa3xx_nand issues   Marek Vasut
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Martin Michlmayr
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Nicolas Pitre
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Saeed Bishara
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Nicolas Pitre
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Saeed Bishara
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Martin Michlmayr
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Martin Michlmayr
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Nicolas Pitre
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Martin Michlmayr
• QNAP TS-209 broken by "orion/kirkwood: reset PCIe unit on boot"   Nicolas Pitre
• recent ARM Erratas 742231 & 742230 broken.   Srinidhi KASAGAR
• recent ARM Erratas 742231 & 742230 broken.   Will Deacon
• Remove unused default configurations   Amit Kucheria
• Remove unused default configurations   Uwe Kleine-König
• RFC: [PATCH 0/2] Add support for MCDE frame buffer driver   Jimmy Rubin
• RFC: [PATCH 1/2] Video: Add support for MCDE frame buffer driver   Jimmy Rubin
• RFC:[PATCH 2/2] Ux500: Add support for MCDE frame buffer driver   Jimmy Rubin
• S3C2416 fixes (gpiolib, SDHCI, compilation without FB device)   Kukjin Kim
• S3C2416 fixes (gpiolib, SDHCI, compilation without FB device)   Darius Augulis
• S3C2416 fixes (gpiolib, SDHCI, compilation without FB device)   Kukjin Kim
• S3C2416 fixes (gpiolib, SDHCI, compilation without FB device)   Darius Augulis
• Segmentation fault when using ping6   Rogerio Pimentel
• Segmentation fault when using ping6   Baruch Siach
• Segmentation fault when using ping6   Rogerio Pimentel
• Segmentation fault when using ping6   Eric Dumazet
• Segmentation fault when using ping6   George G. Davis
• Smargo Cardreader problem with QNAP-TS119(2.6.32-5-kirkwood)   Wieslaw Prymka
• Smargo Cardreader problem with QNAP-TS119(2.6.32-5-kirkwood)   Wieslaw Prymka
• Smargo Cardreader problem with QNAP-TS119(2.6.32-5-kirkwood)   Wieslaw Prymka
• Smargo Cardreader problem with QNAP-TS119(2.6.32-5-kirkwood)   Wieslaw Prymka
• Smargo Cardreader problem with QNAP-TS119(2.6.32-5-kirkwood)   Wieslaw Prymka
• unrecognized/unsupported machine ID   Tuomas Vainikka
• unrecognized/unsupported machine ID   Arnaud Patard (Rtp)
• USB Mass Storage write problem   Morgan Howe
• USB Mass Storage write problem   Baurzhan Ismagulov
• USB Mass Storage write problem   Morgan Howe