[PATCH] cpuimx25 & cpuimx35: fix OTG port registration in host mode
Eric Bénard
eric at eukrea.com
Tue Oct 5 12:51:40 EDT 2010
the PHY is UTMI so don't create an ULPI viewpoint.
Signed-off-by: Eric Bénard <eric at eukrea.com>
---
arch/arm/mach-mx25/mach-cpuimx25.c | 14 ++++----------
arch/arm/mach-mx3/mach-cpuimx35.c | 14 ++++----------
2 files changed, 8 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index e064bb3..c530c8a 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -41,7 +41,6 @@
#include <mach/mxc_nand.h>
#include <mach/imxfb.h>
#include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
#include <mach/iomux-mx25.h>
#include "devices-imx25.h"
@@ -135,18 +134,13 @@ static void __init eukrea_cpuimx25_init(void)
ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
-#if defined(CONFIG_USB_ULPI)
- if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
+ if (otg_mode_host)
mxc_register_device(&mxc_otg, &otg_pdata);
- }
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-#endif
- if (!otg_mode_host)
+ else
mxc_register_device(&otg_udc_device, &otg_device_pdata);
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
eukrea_mbimxsd25_baseboard_init();
#endif
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index d16bec8..8ba5321 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -44,7 +44,6 @@
#include <mach/iomux-mx35.h>
#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
#include "devices-imx35.h"
#include "devices.h"
@@ -168,18 +167,13 @@ static void __init mxc_board_init(void)
ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
-#if defined(CONFIG_USB_ULPI)
- if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
+ if (otg_mode_host)
mxc_register_device(&mxc_otg_host, &otg_pdata);
- }
- mxc_register_device(&mxc_usbh1, &usbh1_pdata);
-#endif
- if (!otg_mode_host)
+ else
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+ mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+
#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
eukrea_mbimxsd35_baseboard_init();
#endif
--
1.7.0.4
More information about the linux-arm-kernel
mailing list