[PATCH 09/27] ARM: S5PV310: Change to using s3c_gpio_cfgpin_range()

[Kukjin Kim]

This patch changes the code setting ranges of GPIO pins in mach-s5pv310 using
s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range().

Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
 arch/arm/mach-s5pv310/setup-i2c0.c |    3 +--
 arch/arm/mach-s5pv310/setup-i2c1.c |    3 +--
 arch/arm/mach-s5pv310/setup-i2c2.c |    3 +--
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-s5pv310/setup-i2c0.c
index 4367128..17c54c8 100644
--- a/arch/arm/mach-s5pv310/setup-i2c0.c
+++ b/arch/arm/mach-s5pv310/setup-i2c0.c
@@ -21,8 +21,7 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2));
+	s3c_gpio_cfgpin_range(S5PV310_GPD1(0), 2, S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-s5pv310/setup-i2c1.c
index 1ecd5bc..1740c9f 100644
--- a/arch/arm/mach-s5pv310/setup-i2c1.c
+++ b/arch/arm/mach-s5pv310/setup-i2c1.c
@@ -18,8 +18,7 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2));
+	s3c_gpio_cfgpin_range(S5PV310_GPD1(2), 2, S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2));
 	s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-s5pv310/setup-i2c2.c
index 4c0d8de..860f77b 100644
--- a/arch/arm/mach-s5pv310/setup-i2c2.c
+++ b/arch/arm/mach-s5pv310/setup-i2c2.c
@@ -18,8 +18,7 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3));
+	s3c_gpio_cfgpin_range(S5PV310_GPA0(6), 2, S3C_GPIO_SFN(3));
 	s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3));
 	s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP);
 }
-- 
1.6.2.5