[PATCH 08/10] OMAP: split plat-omap/common.c
Felipe Balbi
balbi at ti.com
Mon Oct 4 02:56:24 EDT 2010
On Mon, Oct 04, 2010 at 12:34:48AM -0500, Shilimkar, Santosh wrote:
>Felipe,
>
>> -----Original Message-----
>> From: linux-omap-owner at vger.kernel.org [mailto:linux-omap-
>> owner at vger.kernel.org] On Behalf Of Paul Walmsley
>> Sent: Saturday, October 02, 2010 3:06 AM
>> To: linux-omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org
>> Subject: [PATCH 08/10] OMAP: split plat-omap/common.c
>>
>> Split plat-omap/common.c into three pieces:
>>
>> 1. the 32KiHz sync timer and clocksource code, which now lives in
>> plat-omap/32ksynctimer.c;
>>
>I remember you have converted the 32k sync time code to a platform driver.
>That was also addressing the multi-omap build and was removing all
>the compile time switches.
>Do you plan to rebase it and post it again ?
I still have that sitting on my gitorious tree. The patch is attached
to this mail. I compile tested (only) for omap3_defconfig, it probably
needs to start using pm_runtime functions at some point and probably
move to drivers/clocksource instead of arch/arm/plat-omap.
patch is also available at [1]
[1] git://gitorious.org/usb/usb.git clksource
8<------------------------------- cut here ---------------------------------
From 9aad17796072a2ee88aa11c0431fa99e8e9609f0 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi at ti.com>
Date: Tue, 23 Mar 2010 12:54:14 +0200
Subject: [PATCH] arm: omap1/2/3/4: convert 32k-sync driver to a platform_driver
Organization: Texas Instruments\n
Convert the omap32k clocksource driver into a platform_driver
and while at that, also remove the ifdeferry around the code.
Signed-off-by: Felipe Balbi <balbi at ti.com>
---
arch/arm/mach-omap1/devices.c | 24 ++++
arch/arm/mach-omap2/clock2420_data.c | 2 +-
arch/arm/mach-omap2/clock2430_data.c | 2 +-
arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
arch/arm/mach-omap2/devices.c | 35 +++++
arch/arm/plat-omap/Makefile | 4 +-
arch/arm/plat-omap/common.c | 158 ---------------------
arch/arm/plat-omap/counter-32k.c | 251 ++++++++++++++++++++++++++++++++++
8 files changed, 315 insertions(+), 163 deletions(-)
create mode 100644 arch/arm/plat-omap/counter-32k.c
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index aa07256..b276b4b 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -28,6 +28,29 @@
/*-------------------------------------------------------------------------*/
+#define OMAP16XX_TIMER_32K_BASE 0xfffbc400
+
+static struct resource omap_32k_resources[] = {
+ {
+ .start = OMAP16XX_TIMER_32K_BASE,
+ .end = SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap_32k_device = {
+ .name = "omap-counter-32k",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap_32k_resources),
+ .resource = omap_32k_resources,
+};
+
+static void omap_init_32k(void)
+{
+ if (cpu_is_omap16xx())
+ (void) platform_device_register(&omap_32k_device);
+};
+
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
#define OMAP_RTC_BASE 0xfffb4800
@@ -223,6 +246,7 @@ static int __init omap1_init_devices(void)
* in alphabetical order so they're easier to sort through.
*/
+ omap_init_32k();
omap_init_mbox();
omap_init_rtc();
omap_init_spi100k();
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 37d65d6..781bfeb 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1806,7 +1806,7 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gpios_fck", &gpios_fck, CK_242X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X),
CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_242X),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X),
+ CLK("omap-counter-32k", "ick", &sync_32k_ick, CK_242X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X),
CLK("omap24xxcam", "fck", &cam_fck, CK_242X),
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index b33118f..e997692 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1900,7 +1900,7 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "gpios_fck", &gpios_fck, CK_243X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X),
CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X),
+ CLK("omap-counter-32k", "ick", &sync_32k_ick, CK_243X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X),
CLK(NULL, "icr_ick", &icr_ick, CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index dfdce2d..257a8fe 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3343,7 +3343,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX),
CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX),
- CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
+ CLK("omap-counter-32k", "ick", &omap_32ksync_ick, CK_3XXX),
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_3XXX),
CLK(NULL, "gpt1_ick", &gpt1_ick, CK_3XXX),
CLK(NULL, "per_96m_fck", &per_96m_fck, CK_3XXX),
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 2dbb265..8f1714e 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -31,6 +31,40 @@
#include "mux.h"
+static struct resource omap_32k_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap_32k_device = {
+ .name = "omap-counter-32k",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap_32k_resources),
+ .resource = omap_32k_resources,
+};
+
+static void omap_init_32k(void)
+{
+ if (cpu_is_omap2420()) {
+ omap_32k_resources[0].start = OMAP2420_32KSYNCT_BASE;
+ omap_32k_resources[0].end = OMAP2420_32KSYNCT_BASE + SZ_4K;
+ } else if (cpu_is_omap2430()) {
+ omap_32k_resources[0].start = OMAP2430_32KSYNCT_BASE;
+ omap_32k_resources[0].end = OMAP2430_32KSYNCT_BASE + SZ_4K;
+ } else if (cpu_is_omap34xx()) {
+ omap_32k_resources[0].start = OMAP3430_32KSYNCT_BASE;
+ omap_32k_resources[0].end = OMAP3430_32KSYNCT_BASE + SZ_4K;
+ } else if (cpu_is_omap44xx()) {
+ omap_32k_resources[0].start = OMAP4430_32KSYNCT_BASE;
+ omap_32k_resources[0].end = OMAP4430_32KSYNCT_BASE + SZ_4K;
+ } else { /* not supported */
+ return;
+ }
+
+ (void) platform_device_register(&omap_32k_device);
+};
+
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static struct resource cam_resources[] = {
@@ -847,6 +881,7 @@ static int __init omap2_init_devices(void)
* in alphabetical order so they're easier to sort through.
*/
omap_hsmmc_reset();
+ omap_init_32k();
omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 9405831..ff57f33 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
- usb.o fb.o io.o
+ usb.o fb.o io.o counter-32k.o
obj-m :=
obj-n :=
obj- :=
@@ -31,4 +31,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 3008e71..b8683b2 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -89,164 +89,6 @@ void __init omap_reserve(void)
omap_vram_reserve_sdram_memblock();
}
-/*
- * 32KHz clocksource ... always available, on pretty most chips except
- * OMAP 730 and 1510. Other timers could be used as clocksources, with
- * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
- * but systems won't necessarily want to spend resources that way.
- */
-
-#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-
-#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
-
-#include <linux/clocksource.h>
-
-/*
- * offset_32k holds the init time counter value. It is then subtracted
- * from every counter read to achieve a counter that counts time from the
- * kernel boot (needed for sched_clock()).
- */
-static u32 offset_32k __read_mostly;
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static cycle_t omap16xx_32k_read(struct clocksource *cs)
-{
- return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
-}
-#else
-#define omap16xx_32k_read NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2420
-static cycle_t omap2420_32k_read(struct clocksource *cs)
-{
- return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap2420_32k_read NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2430
-static cycle_t omap2430_32k_read(struct clocksource *cs)
-{
- return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap2430_32k_read NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-static cycle_t omap34xx_32k_read(struct clocksource *cs)
-{
- return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap34xx_32k_read NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-static cycle_t omap44xx_32k_read(struct clocksource *cs)
-{
- return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap44xx_32k_read NULL
-#endif
-
-/*
- * Kernel assumes that sched_clock can be called early but may not have
- * things ready yet.
- */
-static cycle_t omap_32k_read_dummy(struct clocksource *cs)
-{
- return 0;
-}
-
-static struct clocksource clocksource_32k = {
- .name = "32k_counter",
- .rating = 250,
- .read = omap_32k_read_dummy,
- .mask = CLOCKSOURCE_MASK(32),
- .shift = 10,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-unsigned long long sched_clock(void)
-{
- return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
- clocksource_32k.mult, clocksource_32k.shift);
-}
-
-/**
- * read_persistent_clock - Return time from a persistent clock.
- *
- * Reads the time from a source which isn't disabled during PM, the
- * 32k sync timer. Convert the cycles elapsed since last read into
- * nsecs and adds to a monotonically increasing timespec.
- */
-static struct timespec persistent_ts;
-static cycles_t cycles, last_cycles;
-void read_persistent_clock(struct timespec *ts)
-{
- unsigned long long nsecs;
- cycles_t delta;
- struct timespec *tsp = &persistent_ts;
-
- last_cycles = cycles;
- cycles = clocksource_32k.read(&clocksource_32k);
- delta = cycles - last_cycles;
-
- nsecs = clocksource_cyc2ns(delta,
- clocksource_32k.mult, clocksource_32k.shift);
-
- timespec_add_ns(tsp, nsecs);
- *ts = *tsp;
-}
-
-static int __init omap_init_clocksource_32k(void)
-{
- static char err[] __initdata = KERN_ERR
- "%s: can't register clocksource!\n";
-
- if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
- struct clk *sync_32k_ick;
-
- if (cpu_is_omap16xx())
- clocksource_32k.read = omap16xx_32k_read;
- else if (cpu_is_omap2420())
- clocksource_32k.read = omap2420_32k_read;
- else if (cpu_is_omap2430())
- clocksource_32k.read = omap2430_32k_read;
- else if (cpu_is_omap34xx())
- clocksource_32k.read = omap34xx_32k_read;
- else if (cpu_is_omap44xx())
- clocksource_32k.read = omap44xx_32k_read;
- else
- return -ENODEV;
-
- sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
- if (sync_32k_ick)
- clk_enable(sync_32k_ick);
-
- clocksource_32k.mult = clocksource_hz2mult(32768,
- clocksource_32k.shift);
-
- offset_32k = clocksource_32k.read(&clocksource_32k);
-
- if (clocksource_register(&clocksource_32k))
- printk(err, clocksource_32k.name);
- }
- return 0;
-}
-arch_initcall(omap_init_clocksource_32k);
-
-#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
-
/* Global address base setup code */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
diff --git a/arch/arm/plat-omap/counter-32k.c b/arch/arm/plat-omap/counter-32k.c
new file mode 100644
index 0000000..6b2d0a6
--- /dev/null
+++ b/arch/arm/plat-omap/counter-32k.c
@@ -0,0 +1,251 @@
+/*
+ * counter-32k.c -- OMAP 32k Sync Timer Clocksource Driver
+ *
+ * Copyright (C) 2005-2010 Tony Lindgren <tony at atomide.com>
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010 Felipe Balbi <me at felipebalbi.com>
+ * Copyright (C) 2009-2010 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/clocksource.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+struct omap_counter_32k_device {
+ struct timespec persistent_ts;
+ struct clocksource cs;
+ cycles_t cycles;
+ cycles_t last_cycles;
+
+ struct device *dev;
+ struct clk *ick;
+ void __iomem *base;
+
+ /*
+ * offset_32k holds the init time counter value. It is then subtracted
+ * from every counter read to achieve a counter that counts time from the
+ * kernel boot (needed for sched_clock()).
+ */
+ u32 offset_32k __read_mostly;
+};
+
+#define to_omap_32k(cs) (container_of(cs, struct omap_counter_32k_device, cs))
+
+static struct omap_counter_32k_device *thecs;
+
+static inline u32 omap_counter_32k_readl(const void __iomem *base, unsigned offset)
+{
+ return __raw_readl(base + offset);
+}
+
+static cycle_t omap_counter_32k_32k_read(struct clocksource *cs)
+{
+ struct omap_counter_32k_device *omap = to_omap_32k(cs);
+
+ return omap_counter_32k_readl(omap->base, 0x10) - omap->offset_32k;
+}
+
+/*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+ struct omap_counter_32k_device *omap = thecs;
+
+ if (!omap)
+ return 0;
+
+ return clocksource_cyc2ns(omap->cs.read(&omap->cs),
+ omap->cs.mult, omap->cs.shift);
+}
+
+/**
+ * read_persistent_clock - Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer. Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+void read_persistent_clock(struct timespec *ts)
+{
+ struct omap_counter_32k_device *omap = thecs;
+ unsigned long long nsecs;
+ cycles_t delta;
+ struct timespec *tsp;
+
+ if (!omap) {
+ ts->tv_sec = 0;
+ ts->tv_nsec = 0;
+ return;
+ }
+
+ tsp = &omap->persistent_ts;
+
+ omap->last_cycles = omap->cycles;
+ omap->cycles = omap->cs.read(&omap->cs);
+ delta = omap->cycles - omap->last_cycles;
+
+ nsecs = clocksource_cyc2ns(delta,
+ omap->cs.mult, omap->cs.shift);
+
+ timespec_add_ns(tsp, nsecs);
+ *ts = *tsp;
+}
+
+static int __init omap_counter_32k_probe(struct platform_device *pdev)
+{
+ struct omap_counter_32k_device *omap;
+ struct resource *res;
+ struct clk *ick;
+
+ int ret;
+
+ void __iomem *base;
+
+ omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+ if (!omap) {
+ dev_dbg(&pdev->dev, "unable to allocate memory\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_dbg(&pdev->dev, "couldn't get resource\n");
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ base = ioremap(res->start, resource_size(res));
+ if (!base) {
+ dev_dbg(&pdev->dev, "ioremap failed\n");
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ ick = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(ick)) {
+ dev_dbg(&pdev->dev, "couldn't get clock\n");
+ ret = PTR_ERR(ick);
+ goto err3;
+ }
+
+ ret = clk_enable(ick);
+ if (ret) {
+ dev_dbg(&pdev->dev, "couldn't enable clock\n");
+ goto err4;
+ }
+
+ omap->base = base;
+ omap->dev = &pdev->dev;
+ omap->ick = ick;
+
+ omap->cs.name = "counter-32k";
+ omap->cs.rating = 250;
+ omap->cs.read = omap_counter_32k_32k_read;
+ omap->cs.mask = CLOCKSOURCE_MASK(32);
+ omap->cs.shift = 10;
+ omap->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ omap->cs.mult = clocksource_hz2mult(32768, omap->cs.shift);
+
+ platform_set_drvdata(pdev, omap);
+
+ ret = clocksource_register(&omap->cs);
+ if (ret) {
+ dev_dbg(&pdev->dev, "failed to register clocksource\n");
+ goto err5;
+ }
+
+ /* initialize our offset */
+ omap->offset_32k = omap_counter_32k_32k_read(&omap->cs);
+
+ /*
+ * REVISIT for now we need to keep a global static pointer
+ * to this clocksource instance. Would it make any sense
+ * to provide a get_clocksource() to fetch the clocksource
+ * we just registered ?
+ */
+ thecs = omap;
+
+ return 0;
+
+err5:
+ clk_disable(ick);
+
+err4:
+ clk_put(ick);
+
+err3:
+ iounmap(base);
+
+err2:
+err1:
+ kfree(omap);
+
+err0:
+ return ret;
+}
+
+static int __exit omap_counter_32k_remove(struct platform_device *pdev)
+{
+ struct omap_counter_32k_device *omap = platform_get_drvdata(pdev);
+
+ clocksource_unregister(&omap->cs);
+ clk_disable(omap->ick);
+ clk_put(omap->ick);
+ iounmap(omap->base);
+ kfree(omap);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static void omap_counter_32k_shutdown(struct platform_device *pdev)
+{
+ struct omap_counter_32k_device *omap = platform_get_drvdata(pdev);
+
+ clk_disable(omap->ick);
+}
+
+static struct platform_driver omap_counter_32k_driver = {
+ .remove = __exit_p(omap_counter_32k_remove),
+ .shutdown = omap_counter_32k_shutdown,
+ .driver = {
+ .name = "omap-counter-32k",
+ },
+};
+
+static int __init omap_counter_32k_init(void)
+{
+ return platform_driver_probe(&omap_counter_32k_driver, omap_counter_32k_probe);
+}
+arch_initcall(omap_counter_32k_init);
+
+static void __exit omap_counter_32k_exit(void)
+{
+ platform_driver_unregister(&omap_counter_32k_driver);
+}
+module_exit(omap_counter_32k_exit);
+
+MODULE_AUTHOR("Felipe Balbi <balbi at ti.com>");
+MODULE_LICENSE("GPL v2");
--
1.7.3.rc0.35.g8ac8c
--
balbi
More information about the linux-arm-kernel
mailing list