[PATCH] ARM: imx: change mx51.h into mx5x.h

[Uwe Kleine-König]

Hello Dinh,

On Tue, Oct 19, 2010 at 04:57:03PM -0500, Dinh.Nguyen at freescale.com wrote:
> From: Dinh Nguyen <Dinh.Nguyen at freescale.com>
> 
> In preparation for submitting i.MX53 support, change mx51.h to
> mx5x.h so that mx5x.h can contain MX53 information as well.
Last time I found time to clean up the imx ports I worked hard that e.g.
mx27 machines only used MX27_ prefixed symbols, not the MX2x_ ones.  (I
don't remember off-hand if I was done, so there might be a few users
left.)

I'd prefer to just add an mx53.h instead.

> Signed-off-by: Dinh Nguyen <Dinh.Nguyen at freescale.com>
> ---
>  arch/arm/mach-mx5/devices-imx51.h                 |    2 +-
>  arch/arm/plat-mxc/include/mach/debug-macro.S      |    2 +-
>  arch/arm/plat-mxc/include/mach/hardware.h         |    2 +-
>  arch/arm/plat-mxc/include/mach/{mx51.h => mx5x.h} |    0
BTW, this is wrong, at least the header guard needs updating when you
rename the file.

>  4 files changed, 3 insertions(+), 3 deletions(-)
>  rename arch/arm/plat-mxc/include/mach/{mx51.h => mx5x.h} (100%)
> 
> diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
> index 5cc910e..f6abe2d 100644
> --- a/arch/arm/mach-mx5/devices-imx51.h
> +++ b/arch/arm/mach-mx5/devices-imx51.h
> @@ -6,7 +6,7 @@
>   * the terms of the GNU General Public License version 2 as published by the
>   * Free Software Foundation.
>   */
> -#include <mach/mx51.h>
> +#include <mach/mx5x.h>
>  #include <mach/devices-common.h>
>  
>  extern const struct imx_fec_data imx51_fec_data __initconst;
> diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
> index 2560640..ac8a2bf 100644
> --- a/arch/arm/plat-mxc/include/mach/debug-macro.S
> +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
> @@ -49,7 +49,7 @@
>  #ifdef UART_PADDR
>  #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
>  #endif
> -#include <mach/mx51.h>
> +#include <mach/mx5x.h>
>  #define UART_PADDR	MX51_UART1_BASE_ADDR
>  #define UART_VADDR	MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
>  #endif
> diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
> index ebadf4a..5a7395a 100644
> --- a/arch/arm/plat-mxc/include/mach/hardware.h
> +++ b/arch/arm/plat-mxc/include/mach/hardware.h
> @@ -28,7 +28,7 @@
>  	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
>  
>  #ifdef CONFIG_ARCH_MX5
> -#include <mach/mx51.h>
> +#include <mach/mx5x.h>
>  #endif
>  
>  #ifdef CONFIG_ARCH_MX3
> diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx5x.h
> similarity index 100%
> rename from arch/arm/plat-mxc/include/mach/mx51.h
> rename to arch/arm/plat-mxc/include/mach/mx5x.h
> -- 
> 1.6.0.4

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |