[RFC 2/2] arm: mach-mx3: pcm043: add write-protect-pin for SDHC

[Wolfram Sang]

Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
---
 arch/arm/mach-mx3/mach-pcm043.c |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index ddb0c5c..f5a9aa7 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -43,6 +43,7 @@
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
 #include <mach/ssi.h>
+#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -224,12 +225,15 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
 };
 
 #define AC97_GPIO_TXFS	(1 * 32 + 31)
 #define AC97_GPIO_TXD	(1 * 32 + 28)
 #define AC97_GPIO_RESET	(1 * 32 + 0)
 
+#define SD1_GPIO_WP	(1 * 32 + 23)
+
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
 	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
@@ -312,6 +316,10 @@ pcm037_nand_board_info __initconst = {
 	.hw_ecc = 1,
 };
 
+static struct esdhc_platform_data sd1_pdata = {
+	.wp_gpio = SD1_GPIO_WP,
+};
+
 #if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
@@ -396,7 +404,7 @@ static void __init mxc_board_init(void)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_esdhc0(NULL);
+	imx35_add_esdhc0(&sd1_pdata);
 }
 
 static void __init pcm043_timer_init(void)
-- 
1.7.1