[PATCH 1/7] mx3: fix the last users of IMX_NEEDS_DEPRECATED_SYMBOLS
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Tue Oct 26 04:49:50 EDT 2010
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/mach-mx3/Makefile | 3 --
arch/arm/mach-mx3/devices.c | 72 ++++++++++++++++++++-----------------
arch/arm/mach-mx3/mach-mx31_3ds.c | 2 +-
arch/arm/mach-mx3/mm.c | 48 ++++++++++++------------
4 files changed, 64 insertions(+), 61 deletions(-)
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 8a182d0a..7feb6c4 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,8 +5,6 @@
# Object file lists.
obj-y := mm.o devices.o cpu.o
-CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
@@ -15,7 +13,6 @@ obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
-CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o mx31moboard-smartbot.o
obj-$(CONFIG_MACH_QONG) += mach-qong.o
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d4da949..1e737ad 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -33,18 +33,18 @@
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
- .base = IO_ADDRESS(GPIO1_BASE_ADDR),
- .irq = MXC_INT_GPIO1,
+ .base = MX31_IO_ADDRESS(MX31_GPIO1_BASE_ADDR),
+ .irq = MX3x_INT_GPIO1,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
- .base = IO_ADDRESS(GPIO2_BASE_ADDR),
- .irq = MXC_INT_GPIO2,
+ .base = MX31_IO_ADDRESS(MX31_GPIO2_BASE_ADDR),
+ .irq = MX3x_INT_GPIO2,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
- .base = IO_ADDRESS(GPIO3_BASE_ADDR),
- .irq = MXC_INT_GPIO3,
+ .base = MX31_IO_ADDRESS(MX31_GPIO3_BASE_ADDR),
+ .irq = MX3x_INT_GPIO3,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}
};
@@ -56,8 +56,8 @@ int __init imx3x_register_gpios(void)
static struct resource mxc_w1_master_resources[] = {
{
- .start = OWIRE_BASE_ADDR,
- .end = OWIRE_BASE_ADDR + SZ_4K - 1,
+ .start = MX3x_OWIRE_BASE_ADDR,
+ .end = MX3x_OWIRE_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
@@ -110,8 +110,8 @@ struct platform_device mxcsdhc_device1 = {
static struct resource rnga_resources[] = {
{
- .start = RNGA_BASE_ADDR,
- .end = RNGA_BASE_ADDR + 0x28,
+ .start = MX3x_RNGA_BASE_ADDR,
+ .end = MX3x_RNGA_BASE_ADDR + 0x28,
.flags = IORESOURCE_MEM,
},
};
@@ -129,20 +129,20 @@ struct platform_device mxc_rnga_device = {
/* The resource order is important! */
static struct resource mx3_ipu_rsrc[] = {
{
- .start = IPU_CTRL_BASE_ADDR,
- .end = IPU_CTRL_BASE_ADDR + 0x5F,
+ .start = MX3x_IPU_CTRL_BASE_ADDR,
+ .end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F,
.flags = IORESOURCE_MEM,
}, {
- .start = IPU_CTRL_BASE_ADDR + 0x88,
- .end = IPU_CTRL_BASE_ADDR + 0xB3,
+ .start = MX3x_IPU_CTRL_BASE_ADDR + 0x88,
+ .end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_IPU_SYN,
- .end = MXC_INT_IPU_SYN,
+ .start = MX3x_INT_IPU_SYN,
+ .end = MX3x_INT_IPU_SYN,
.flags = IORESOURCE_IRQ,
}, {
- .start = MXC_INT_IPU_ERR,
- .end = MXC_INT_IPU_ERR,
+ .start = MX3x_INT_IPU_ERR,
+ .end = MX3x_INT_IPU_ERR,
.flags = IORESOURCE_IRQ,
},
};
@@ -156,8 +156,8 @@ struct platform_device mx3_ipu = {
static struct resource fb_resources[] = {
{
- .start = IPU_CTRL_BASE_ADDR + 0xB4,
- .end = IPU_CTRL_BASE_ADDR + 0x1BF,
+ .start = MX3x_IPU_CTRL_BASE_ADDR + 0xB4,
+ .end = MX3x_IPU_CTRL_BASE_ADDR + 0x1BF,
.flags = IORESOURCE_MEM,
},
};
@@ -174,8 +174,8 @@ struct platform_device mx3_fb = {
static struct resource camera_resources[] = {
{
- .start = IPU_CTRL_BASE_ADDR + 0x60,
- .end = IPU_CTRL_BASE_ADDR + 0x87,
+ .start = MX3x_IPU_CTRL_BASE_ADDR + 0x60,
+ .end = MX3x_IPU_CTRL_BASE_ADDR + 0x87,
.flags = IORESOURCE_MEM,
},
};
@@ -190,14 +190,15 @@ struct platform_device mx3_camera = {
},
};
+#ifdef CONFIG_ARCH_MX31
static struct resource otg_resources[] = {
{
.start = MX31_OTG_BASE_ADDR,
.end = MX31_OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_USB3,
- .end = MXC_INT_USB3,
+ .start = MX31_INT_USB3,
+ .end = MX31_INT_USB3,
.flags = IORESOURCE_IRQ,
},
};
@@ -215,6 +216,7 @@ struct platform_device mxc_otg_udc_device = {
.resource = otg_resources,
.num_resources = ARRAY_SIZE(otg_resources),
};
+#endif
/* OTG host */
struct platform_device mxc_otg_host = {
@@ -228,8 +230,8 @@ struct platform_device mxc_otg_host = {
.num_resources = ARRAY_SIZE(otg_resources),
};
+#ifdef CONFIG_ARCH_MX31
/* USB host 1 */
-
static u64 usbh1_dmamask = ~(u32)0;
static struct resource mxc_usbh1_resources[] = {
@@ -238,8 +240,8 @@ static struct resource mxc_usbh1_resources[] = {
.end = MX31_OTG_BASE_ADDR + 0x3ff,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_USB1,
- .end = MXC_INT_USB1,
+ .start = MX31_INT_USB1,
+ .end = MX31_INT_USB1,
.flags = IORESOURCE_IRQ,
},
};
@@ -264,8 +266,8 @@ static struct resource mxc_usbh2_resources[] = {
.end = MX31_OTG_BASE_ADDR + 0x5ff,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_USB2,
- .end = MXC_INT_USB2,
+ .start = MX31_INT_USB2,
+ .end = MX31_INT_USB2,
.flags = IORESOURCE_IRQ,
},
};
@@ -280,6 +282,7 @@ struct platform_device mxc_usbh2 = {
.resource = mxc_usbh2_resources,
.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
};
+#endif
static struct resource imx_wdt_resources[] = {
{
@@ -343,14 +346,17 @@ static int __init mx3_devices_init(void)
#endif
#if defined(CONFIG_ARCH_MX35)
if (cpu_is_mx35()) {
+ imx_gpio_ports[0].base = MX35_IO_ADDRESS(MX35_GPIO1_BASE_ADDR),
+ imx_gpio_ports[1].base = MX35_IO_ADDRESS(MX35_GPIO2_BASE_ADDR),
+ imx_gpio_ports[2].base = MX35_IO_ADDRESS(MX35_GPIO3_BASE_ADDR),
otg_resources[0].start = MX35_OTG_BASE_ADDR;
otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
- otg_resources[1].start = MXC_INT_USBOTG;
- otg_resources[1].end = MXC_INT_USBOTG;
+ otg_resources[1].start = MX35_INT_USBOTG;
+ otg_resources[1].end = MX35_INT_USBOTG;
mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
- mxc_usbh1_resources[1].start = MXC_INT_USBHS;
- mxc_usbh1_resources[1].end = MXC_INT_USBHS;
+ mxc_usbh1_resources[1].start = MX35_INT_USBHS;
+ mxc_usbh1_resources[1].end = MX35_INT_ESAI;
imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 6fe69e1..1d24617 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -281,7 +281,7 @@ static void __init mxc_board_init(void)
mx31_3ds_usbotg_init();
mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
- if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ if (!mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
printk(KERN_WARNING "Init of the debugboard failed, all "
"devices on the board are unusable.\n");
}
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index b4ffc53..809ee40 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -42,29 +42,29 @@
*/
static struct map_desc mxc_io_desc[] __initdata = {
{
- .virtual = X_MEMC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
- .length = X_MEMC_SIZE,
- .type = MT_DEVICE
+ .virtual = MX3x_X_MEMC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX3x_X_MEMC_BASE_ADDR),
+ .length = MX3x_X_MEMC_SIZE,
+ .type = MT_DEVICE
}, {
- .virtual = AVIC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AVIC_BASE_ADDR),
- .length = AVIC_SIZE,
- .type = MT_DEVICE_NONSHARED
+ .virtual = MX3x_AVIC_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX3x_AVIC_BASE_ADDR),
+ .length = MX3x_AVIC_SIZE,
+ .type = MT_DEVICE_NONSHARED
}, {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
+ .virtual = MX3x_AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX3x_AIPS1_BASE_ADDR),
+ .length = MX3x_AIPS1_SIZE,
+ .type = MT_DEVICE_NONSHARED
}, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
+ .virtual = MX3x_AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX3x_AIPS2_BASE_ADDR),
+ .length = MX3x_AIPS2_SIZE,
+ .type = MT_DEVICE_NONSHARED
}, {
- .virtual = SPBA0_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
- .length = SPBA0_SIZE,
+ .virtual = MX3x_SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX3x_SPBA0_BASE_ADDR),
+ .length = MX3x_SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
},
};
@@ -77,7 +77,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
void __init mx31_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
- mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+ mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
@@ -86,8 +86,8 @@ void __init mx31_map_io(void)
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+ mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX35_IO_ADDRESS(MX3x_WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
@@ -97,7 +97,7 @@ int imx3x_register_gpios(void);
void __init mx31_init_irq(void)
{
- mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+ mxc_init_irq(MX31_IO_ADDRESS(MX3x_AVIC_BASE_ADDR));
imx3x_register_gpios();
}
@@ -129,7 +129,7 @@ static int mxc_init_l2x0(void)
pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
}
- l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
+ l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
if (IS_ERR(l2x0_base)) {
printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
PTR_ERR(l2x0_base));
--
1.7.2.3
More information about the linux-arm-kernel
mailing list