[PATCH 3/5] mx27: update defconfig

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Fri Oct 15 03:27:12 EDT 2010


On Fri, Oct 15, 2010 at 01:00:03AM +0200, Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric at eukrea.com>
> ---
OK in general, though I would prefer a more verbose commit log about
what you (or others) changed and why.

Best regards
Uwe

>  arch/arm/configs/mx27_defconfig |   60 ++++++++++++++++++++++++++++++++++----
>  1 files changed, 53 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
> index 813cfb3..9623f42 100644
> --- a/arch/arm/configs/mx27_defconfig
> +++ b/arch/arm/configs/mx27_defconfig
> @@ -72,6 +72,10 @@ CONFIG_MTD_NAND=y
>  CONFIG_MTD_NAND_MXC=y
>  CONFIG_MTD_UBI=y
>  CONFIG_EEPROM_AT24=y
> +CONFIG_SCSI=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_SCSI_MULTI_LUN=y
> +# CONFIG_SCSI_LOWLEVEL is not set
>  CONFIG_NETDEVICES=y
>  CONFIG_NET_ETHERNET=y
>  CONFIG_FEC=y
> @@ -79,12 +83,12 @@ CONFIG_FEC=y
>  # CONFIG_NETDEV_10000 is not set
>  # CONFIG_INPUT_MOUSEDEV is not set
>  CONFIG_INPUT_EVDEV=y
> -# CONFIG_INPUT_KEYBOARD is not set
> +CONFIG_KEYBOARD_IMX=y
>  # CONFIG_INPUT_MOUSE is not set
>  CONFIG_INPUT_TOUCHSCREEN=y
> -CONFIG_TOUCHSCREEN_ADS7846=m
> -# CONFIG_SERIO is not set
> -CONFIG_SERIAL_8250=m
> +CONFIG_TOUCHSCREEN_ADS7846=y
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_IMX=y
>  CONFIG_SERIAL_IMX_CONSOLE=y
>  # CONFIG_LEGACY_PTYS is not set
> @@ -94,21 +98,64 @@ CONFIG_I2C_CHARDEV=y
>  CONFIG_I2C_IMX=y
>  CONFIG_SPI=y
>  CONFIG_SPI_IMX=y
> +CONFIG_GPIO_SYSFS=y
>  CONFIG_W1=y
>  CONFIG_W1_MASTER_MXC=y
>  CONFIG_W1_SLAVE_THERM=y
>  # CONFIG_HWMON is not set
> +CONFIG_WATCHDOG=y
> +CONFIG_IMX2_WDT=y
> +CONFIG_MEDIA_SUPPORT=y
> +CONFIG_VIDEO_DEV=y
> +CONFIG_SOC_CAMERA=y
> +CONFIG_SOC_CAMERA_MT9M001=y
> +CONFIG_SOC_CAMERA_MT9M111=y
> +CONFIG_SOC_CAMERA_MT9T031=y
> +CONFIG_SOC_CAMERA_MT9T112=y
> +CONFIG_SOC_CAMERA_MT9V022=y
> +CONFIG_SOC_CAMERA_RJ54N1=y
> +CONFIG_SOC_CAMERA_TW9910=y
> +CONFIG_SOC_CAMERA_PLATFORM=y
> +CONFIG_SOC_CAMERA_OV772X=y
> +CONFIG_SOC_CAMERA_OV9640=y
> +CONFIG_VIDEO_MX2=y
> +# CONFIG_RADIO_ADAPTERS is not set
>  CONFIG_FB=y
>  CONFIG_FB_IMX=y
>  CONFIG_FRAMEBUFFER_CONSOLE=y
>  CONFIG_FONTS=y
>  CONFIG_FONT_8x8=y
> -# CONFIG_HID_SUPPORT is not set
> -CONFIG_USB=m
> +CONFIG_SOUND=y
> +CONFIG_SND=y
> +CONFIG_SND_SEQUENCER=y
> +CONFIG_SND_MIXER_OSS=y
> +CONFIG_SND_PCM_OSS=y
> +CONFIG_SND_SEQUENCER_OSS=y
> +# CONFIG_SND_DRIVERS is not set
> +# CONFIG_SND_ARM is not set
> +# CONFIG_SND_SPI is not set
> +# CONFIG_SND_USB is not set
> +CONFIG_SND_SOC=y
> +CONFIG_SND_IMX_SOC=y
> +CONFIG_SND_SOC_PHYCORE_AC97=y
> +CONFIG_SND_SOC_EUKREA_TLV320=y
> +# CONFIG_USB_HID is not set
> +CONFIG_USB=y
>  # CONFIG_USB_DEVICE_CLASS is not set
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_MXC=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_ETH=y
>  CONFIG_USB_ULPI=y
> +CONFIG_NOP_USB_XCEIV=y
>  CONFIG_MMC=y
>  CONFIG_MMC_MXC=y
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_TRIGGERS=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
>  CONFIG_RTC_CLASS=y
>  CONFIG_RTC_DRV_PCF8563=y
>  # CONFIG_DNOTIFY is not set
> @@ -119,7 +166,6 @@ CONFIG_UBIFS_FS=y
>  CONFIG_NFS_FS=y
>  CONFIG_NFS_V3=y
>  CONFIG_ROOT_NFS=y
> -CONFIG_NLS=y
>  CONFIG_NLS_CODEPAGE_437=m
>  CONFIG_NLS_CODEPAGE_850=m
>  CONFIG_NLS_ISO8859_1=y
> -- 
> 1.7.0.4
> 
> 

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |



More information about the linux-arm-kernel mailing list