[PATCHv2 2/2] mx51: add support for genesi efikamx nettop

[Amit Kucheria]

Get serial port and OTG USB working for now. There is an ethernet device
(asix) attached to OTG, so we should get ethernet too.

Signed-off-by: Amit Kucheria <amit.kucheria at linaro.org>
---
 arch/arm/mach-mx5/Kconfig              |    8 +++
 arch/arm/mach-mx5/Makefile             |    1 +
 arch/arm/mach-mx5/board-mx51_efikamx.c |   95 ++++++++++++++++++++++++++++++++
 3 files changed, 104 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-mx5/board-mx51_efikamx.c

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 3a4c3b3..1c8b263 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -18,6 +18,14 @@ config MACH_MX51_BABBAGE
 	  u-boot. This includes specific configurations for the board and its
 	  peripherals.
 
+config MACH_MX51_EFIKAMX
+	bool "Support MX51 Genesi Efika MX nettop"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	 Include support for Genesi Efika MX nettop. This includes specific
+	 configurations for the board and its peripherals.
+
+
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
 	select IMX_HAVE_PLATFORM_IMX_UART
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index ac0d14c..f370d70 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -6,6 +6,7 @@
 obj-y   := cpu.o mm.o clock-mx51.o devices.o usb.o
 
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
new file mode 100644
index 0000000..5d61175
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2010 Linaro Limited
+ *
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+#include "usb.h"
+
+static struct pad_desc mx51efikamx_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init   = mx51_initialize_otg_port,
+	.portsc = MXC_EHCI_UTMI_16BIT,
+	.flags  = MXC_EHCI_INTERNAL_PHY,
+};
+
+static void __init mx51_efikamx_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
+					ARRAY_SIZE(mx51efikamx_pads));
+	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	mxc_init_imx_uart();
+}
+
+static void __init mx51_efikamx_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_efikamx_timer_init,
+};
+
+MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
+	/* Maintainer: Amit Kucheria <amit.kucheria at linaro.org> */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = mx51_efikamx_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
-- 
1.7.0.4