[PATCHv4 1/2] ARM: imx: Add gpio-keys to mx51 babbage board
Amit Kucheria
amit.kucheria at canonical.com
Fri Oct 22 06:47:51 EDT 2010
Dinh,
The platform code should be separated from the board-specific code.
Can you split this into two patches?
Regards,
Amit
On 10 Oct 21, Dinh.Nguyen at freescale.com wrote:
> From: Dinh Nguyen <Dinh.Nguyen at freescale.com>
>
> Add functionality for the power button on MX51 Babbage board.
>
> This patch is based on Sascha Hauer's imx/linux-2.6 for-rmk tree.
>
> Signed-off-by: Dinh Nguyen <Dinh.Nguyen at freescale.com>
> ---
> arch/arm/configs/mx51_defconfig | 1 +
> arch/arm/mach-mx5/board-mx51_babbage.c | 22 +++++++++++++++++
> arch/arm/mach-mx5/devices-imx51.h | 2 +
> arch/arm/plat-mxc/devices/Kconfig | 5 ++++
> arch/arm/plat-mxc/devices/Makefile | 1 +
> arch/arm/plat-mxc/devices/platform-buttons.c | 29 +++++++++++++++++++++++
> arch/arm/plat-mxc/include/mach/devices-common.h | 4 +++
> arch/arm/plat-mxc/include/mach/iomux-mx51.h | 2 +-
> 8 files changed, 65 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/plat-mxc/devices/platform-buttons.c
>
> diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
> index 163cfee..5c7a872 100644
> --- a/arch/arm/configs/mx51_defconfig
> +++ b/arch/arm/configs/mx51_defconfig
> @@ -82,6 +82,7 @@ CONFIG_FEC=y
> CONFIG_INPUT_FF_MEMLESS=m
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_EVDEV=y
> +CONFIG_KEYBOARD_GPIO=y
> CONFIG_INPUT_EVBUG=m
> CONFIG_MOUSE_PS2=m
> CONFIG_MOUSE_PS2_ELANTECH=y
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
> index 23ee4a4..f6ce0d6 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -18,6 +18,8 @@
> #include <linux/io.h>
> #include <linux/fsl_devices.h>
> #include <linux/fec.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/input.h>
>
> #include <mach/common.h>
> #include <mach/hardware.h>
> @@ -37,6 +39,7 @@
> #define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
> #define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */
> #define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */
> +#define BABBAGE_POWER_KEY (1*32 + 21) /* GPIO_2_21 */
>
> /* USB_CTRL_1 */
> #define MX51_USB_CTRL_1_OFFSET 0x10
> @@ -46,6 +49,21 @@
> #define MX51_USB_PLL_DIV_19_2_MHZ 0x01
> #define MX51_USB_PLL_DIV_24_MHZ 0x02
>
> +static struct gpio_keys_button babbage_buttons[] = {
> + {
> + .gpio = BABBAGE_POWER_KEY,
> + .code = BTN_0,
> + .desc = "PWR",
> + .active_low = 1,
> + .wakeup = 1,
> + },
> +};
> +
> +static struct gpio_keys_platform_data imx_button_data = {
> + .buttons = babbage_buttons,
> + .nbuttons = ARRAY_SIZE(babbage_buttons),
> +};
> +
> static struct pad_desc mx51babbage_pads[] = {
> /* UART1 */
> MX51_PAD_UART1_RXD__UART1_RXD,
> @@ -112,6 +130,9 @@ static struct pad_desc mx51babbage_pads[] = {
>
> /* FEC PHY reset line */
> MX51_PAD_EIM_A20__GPIO_2_14,
> +
> + /* Power Key */
> + MX51_PAD_EIM_A27__GPIO_2_21,
> };
>
> /* Serial ports */
> @@ -287,6 +308,7 @@ static void __init mxc_board_init(void)
> mxc_init_imx_uart();
> babbage_fec_reset();
> imx51_add_fec(NULL);
> + imx51_add_buttons(&imx_button_data);
>
> imx51_add_imx_i2c(0, &babbage_i2c_data);
> imx51_add_imx_i2c(1, &babbage_i2c_data);
> diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
> index 5cc910e..a114d65 100644
> --- a/arch/arm/mach-mx5/devices-imx51.h
> +++ b/arch/arm/mach-mx5/devices-imx51.h
> @@ -9,6 +9,8 @@
> #include <mach/mx51.h>
> #include <mach/devices-common.h>
>
> +#define imx51_add_buttons(pdata) imx_add_buttons(pdata)
> +
> extern const struct imx_fec_data imx51_fec_data __initconst;
> #define imx51_add_fec(pdata) \
> imx_add_fec(&imx51_fec_data, pdata)
> diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
> index 4047994..dbd688b 100644
> --- a/arch/arm/plat-mxc/devices/Kconfig
> +++ b/arch/arm/plat-mxc/devices/Kconfig
> @@ -23,3 +23,8 @@ config IMX_HAVE_PLATFORM_MXC_NAND
>
> config IMX_HAVE_PLATFORM_SPI_IMX
> bool
> +
> +config IMX_HAVE_PLATFORM_GPIO_BUTTONS
> + bool
> + default y if ARCH_MX51
> +
> diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
> index 0a3c1f0..41008be 100644
> --- a/arch/arm/plat-mxc/devices/Makefile
> +++ b/arch/arm/plat-mxc/devices/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
> obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
> obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
> obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
> +obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_BUTTONS) += platform-buttons.o
> \ No newline at end of file
> diff --git a/arch/arm/plat-mxc/devices/platform-buttons.c b/arch/arm/plat-mxc/devices/platform-buttons.c
> new file mode 100644
> index 0000000..23ceed8
> --- /dev/null
> +++ b/arch/arm/plat-mxc/devices/platform-buttons.c
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor,
> + * Boston, MA 02110-1301, USA.
> + */
> +#include <asm/sizes.h>
> +#include <mach/hardware.h>
> +#include <mach/devices-common.h>
> +
> +struct platform_device *__init imx_add_buttons(
> + const struct gpio_keys_platform_data *pdata)
> +{
> +
> + return imx_add_platform_device("gpio-keys", -1, NULL,
> + NULL, pdata, sizeof(*pdata));
> +
> +}
> diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
> index 86d7575..0b37d6d 100644
> --- a/arch/arm/plat-mxc/include/mach/devices-common.h
> +++ b/arch/arm/plat-mxc/include/mach/devices-common.h
> @@ -14,6 +14,10 @@ struct platform_device *imx_add_platform_device(const char *name, int id,
> const struct resource *res, unsigned int num_resources,
> const void *data, size_t size_data);
>
> +#include <linux/gpio_keys.h>
> +struct platform_device *__init imx_add_buttons(
> + const struct gpio_keys_platform_data *pdata);
> +
> #include <linux/fec.h>
> struct imx_fec_data {
> resource_size_t iobase;
> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> index e46b1c2..7ae27e8 100644
> --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> @@ -114,7 +114,7 @@ typedef enum iomux_config {
> #define MX51_PAD_EIM_A24__GPIO_2_18 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL)
> #define MX51_PAD_EIM_A25__GPIO_2_19 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL)
> #define MX51_PAD_EIM_A26__GPIO_2_20 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL)
> -#define MX51_PAD_EIM_A27__GPIO_2_21 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL)
> +#define MX51_PAD_EIM_A27__GPIO_2_21 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, MX51_GPIO_PAD_CTRL | PAD_CTL_PUS_100K_UP)
> #define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
> #define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
> #define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL)
> --
> 1.6.0.4
>
>
--
----------------------------------------------------------------------
Amit Kucheria, Kernel Engineer || amit.kucheria at canonical.com
----------------------------------------------------------------------
More information about the linux-arm-kernel
mailing list