[PATCH 2/5] mx25: add defconfig

Fri Oct 15 03:22:54 EDT 2010

On Fri, Oct 15, 2010 at 01:00:02AM +0200, Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric at eukrea.com>
I'd like to see mx25 in a defconfig, too.  In case RMK subjects
that adding a defconfig isn't sensible, I think the best bet we have is
merging mx3 and mx25 into mach-imx and working to allow compiling a
kernel that supports these two in a single kernel.  (mx3 and mx25 share
PHYS_OFFSET, so this is easier than the other merges.)

Best regards
Uwe

> ---
>  arch/arm/configs/mx25_defconfig |  159 +++++++++++++++++++++++++++++++++++++++
>  1 files changed, 159 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/configs/mx25_defconfig
> 
> diff --git a/arch/arm/configs/mx25_defconfig b/arch/arm/configs/mx25_defconfig
> new file mode 100644
> index 0000000..25aa600
> --- /dev/null
> +++ b/arch/arm/configs/mx25_defconfig
> @@ -0,0 +1,159 @@
> +CONFIG_EXPERIMENTAL=y
> +CONFIG_SYSVIPC=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_LOG_BUF_SHIFT=14
> +CONFIG_SYSFS_DEPRECATED_V2=y
> +CONFIG_EMBEDDED=y
> +CONFIG_SLAB=y
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +CONFIG_MODULE_FORCE_UNLOAD=y
> +CONFIG_MODVERSIONS=y
> +# CONFIG_BLK_DEV_BSG is not set
> +CONFIG_DEFAULT_NOOP=y
> +CONFIG_ARCH_MXC=y
> +CONFIG_ARCH_MX25=y
> +CONFIG_MACH_MX25_3DS=y
> +CONFIG_MACH_EUKREA_CPUIMX25=y
> +CONFIG_MXC_IRQ_PRIOR=y
> +CONFIG_MXC_PWM=y
> +CONFIG_MXC_DEBUG_BOARD=y
> +CONFIG_NO_HZ=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_PREEMPT=y
> +CONFIG_AEABI=y
> +CONFIG_ZBOOT_ROM_TEXT=0x0
> +CONFIG_ZBOOT_ROM_BSS=0x0
> +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
Do you really want this?

> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> +# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_BEET is not set
> +# CONFIG_INET_LRO is not set
> +# CONFIG_INET_DIAG is not set
> +# CONFIG_IPV6 is not set
> +CONFIG_CAN=y
> +CONFIG_CAN_RAW=y
> +CONFIG_CAN_BCM=y
> +CONFIG_CAN_VCAN=y
> +CONFIG_CAN_DEV=y
> +CONFIG_CAN_CALC_BITTIMING=y
> +CONFIG_CAN_FLEXCAN=y
> +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> +CONFIG_MTD=y
> +CONFIG_MTD_PARTITIONS=y
> +CONFIG_MTD_CMDLINE_PARTS=y
> +CONFIG_MTD_CHAR=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_CFI=y
> +CONFIG_MTD_PHYSMAP=y
> +CONFIG_MTD_NAND=y
> +CONFIG_MTD_NAND_MXC=y
> +CONFIG_MTD_UBI=y
> +# CONFIG_BLK_DEV is not set
> +# CONFIG_MISC_DEVICES is not set
> +CONFIG_SCSI=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_CHR_DEV_SG=y
> +CONFIG_SCSI_MULTI_LUN=y
> +# CONFIG_SCSI_LOWLEVEL is not set
> +CONFIG_NETDEVICES=y
> +CONFIG_SMSC_PHY=y
> +CONFIG_NET_ETHERNET=y
> +CONFIG_MII=y
> +CONFIG_FEC=y
> +# CONFIG_NETDEV_1000 is not set
> +# CONFIG_NETDEV_10000 is not set
> +CONFIG_INPUT_EVDEV=y
> +# CONFIG_KEYBOARD_ATKBD is not set
> +CONFIG_KEYBOARD_GPIO=y
> +# CONFIG_INPUT_MOUSE is not set
> +CONFIG_INPUT_TOUCHSCREEN=y
> +CONFIG_TOUCHSCREEN_TSC2007=y
> +# CONFIG_SERIO is not set
> +# CONFIG_VT is not set
> +CONFIG_SERIAL_IMX=y
> +CONFIG_SERIAL_IMX_CONSOLE=y
> +# CONFIG_LEGACY_PTYS is not set
> +# CONFIG_HW_RANDOM is not set
> +CONFIG_I2C=y
> +CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_IMX=y
> +CONFIG_GPIO_SYSFS=y
> +# CONFIG_HWMON is not set
> +# CONFIG_MFD_SUPPORT is not set
> +CONFIG_MEDIA_SUPPORT=y
> +CONFIG_VIDEO_DEV=y
> +# CONFIG_VIDEO_ALLOW_V4L1 is not set
> +# CONFIG_VIDEO_IR_I2C is not set
> +CONFIG_SOC_CAMERA=y
> +CONFIG_SOC_CAMERA_PLATFORM=y
> +# CONFIG_RADIO_ADAPTERS is not set
> +CONFIG_FB=y
> +CONFIG_FB_IMX=y
> +CONFIG_BACKLIGHT_LCD_SUPPORT=y
> +CONFIG_LCD_CLASS_DEVICE=y
> +CONFIG_LCD_PLATFORM=m
> +CONFIG_BACKLIGHT_CLASS_DEVICE=y
> +CONFIG_LOGO=y
> +CONFIG_SOUND=y
> +CONFIG_SND=y
> +CONFIG_SND_SEQUENCER=y
> +CONFIG_SND_MIXER_OSS=y
> +CONFIG_SND_PCM_OSS=y
> +CONFIG_SND_SEQUENCER_OSS=y
> +CONFIG_SND_HRTIMER=y
> +# CONFIG_SND_DRIVERS is not set
> +# CONFIG_SND_ARM is not set
> +CONFIG_SND_SOC=y
> +CONFIG_SND_IMX_SOC=y
> +CONFIG_SND_SOC_EUKREA_TLV320=y
> +CONFIG_USB=y
> +CONFIG_USB_DEVICEFS=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_MXC=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_ETH=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_PLTFM=y
> +CONFIG_MMC_SDHCI_ESDHC_IMX=y
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_TRIGGERS=y
> +CONFIG_LEDS_TRIGGER_TIMER=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +CONFIG_LEDS_TRIGGER_BACKLIGHT=y
> +CONFIG_LEDS_TRIGGER_GPIO=y
> +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_PCF8563=y
> +CONFIG_DMADEVICES=y
> +CONFIG_EXT3_FS=y
> +# CONFIG_DNOTIFY is not set
> +CONFIG_AUTOFS4_FS=y
> +CONFIG_MSDOS_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_JFFS2_FS=y
> +CONFIG_UBIFS_FS=y
> +CONFIG_NFS_FS=y
> +CONFIG_NFS_V3=y
> +CONFIG_NFS_V4=y
> +CONFIG_ROOT_NFS=y
> +CONFIG_PARTITION_ADVANCED=y
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ISO8859_1=y
> +# CONFIG_ENABLE_WARN_DEPRECATED is not set
> +# CONFIG_ENABLE_MUST_CHECK is not set
> +# CONFIG_RCU_CPU_STALL_DETECTOR is not set
> +CONFIG_SYSCTL_SYSCALL_CHECK=y
> +# CONFIG_CRYPTO_ANSI_CPRNG is not set
> -- 

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |