[PATCH 8/10] ARM: S5PV210: Add EPLL clock operations

Kukjin Kim kgene.kim at samsung.com
Fri Oct 8 06:29:58 EDT 2010


Seungwhan Youn wrote:
> 
> This patch adds EPLL specific clock get_rate/set_rate operations
> on S5PV210.
> 
> Signed-off-by: Seungwhan Youn <sw.youn at samsung.com>
> ---
>  arch/arm/mach-s5pv210/clock.c        |   95
> ++++++++++++++++++++++++++++++++++
>  arch/arm/plat-s5p/include/plat/pll.h |    2 +
>  2 files changed, 97 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
> index bcbe7e9..affa5a0 100644
> --- a/arch/arm/mach-s5pv210/clock.c
> +++ b/arch/arm/mach-s5pv210/clock.c
> @@ -1003,6 +1003,97 @@ static struct clksrc_clk *sysclks[] = {
>  	&clk_sclk_spdif,
>  };
> 
> +static int s5pv210_epll_enable(struct clk *clk, int enable)
> +{
> +	unsigned int ctrlbit = clk->ctrlbit;
> +	unsigned int epll_con = __raw_readl(S5P_EPLL_CON0) & ~ctrlbit;
> +
> +	if (enable)
> +		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON0);
> +	else
> +		__raw_writel(epll_con, S5P_EPLL_CON0);
> +
> +	return 0;
> +}
> +

Maybe if we move s5p64x0_epll_enable() to common part i.e.,
plat-s5p/clock.c, we can use common_epll_enable() in here.
Of course, need to sort out the regarding definitions such as
S5PXX_EPLL_CON0...

> +static unsigned long s5pv210_epll_get_rate(struct clk *clk)
> +{
> +	return clk->rate;
> +}
> +
> +static u32 epll_div[][6] = {
> +	{  48000000, 0, 48, 3, 3, 0 },
> +	{  96000000, 0, 48, 3, 2, 0 },
> +	{ 144000000, 1, 72, 3, 2, 0 },
> +	{ 192000000, 0, 48, 3, 1, 0 },
> +	{ 288000000, 1, 72, 3, 1, 0 },
> +	{  32750000, 1, 65, 3, 4, 35127 },
> +	{  32768000, 1, 65, 3, 4, 35127 },
> +	{  45158400, 0, 45, 3, 3, 10355 },
> +	{  45000000, 0, 45, 3, 3, 10355 },
> +	{  45158000, 0, 45, 3, 3, 10355 },
> +	{  49125000, 0, 49, 3, 3, 9961 },
> +	{  49152000, 0, 49, 3, 3, 9961 },
> +	{  67737600, 1, 67, 3, 3, 48366 },
> +	{  67738000, 1, 67, 3, 3, 48366 },
> +	{  73800000, 1, 73, 3, 3, 47710 },
> +	{  73728000, 1, 73, 3, 3, 47710 },
> +	{  36000000, 1, 32, 3, 4, 0 },
> +	{  60000000, 1, 60, 3, 3, 0 },
> +	{  72000000, 1, 72, 3, 3, 0 },
> +	{  80000000, 1, 80, 3, 3, 0 },
> +	{  84000000, 0, 42, 3, 2, 0 },
> +	{  50000000, 0, 50, 3, 3, 0 },
> +};
> +
> +static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate)
> +{
> +	unsigned int epll_con, epll_con_k;
> +	unsigned int i;
> +
> +	/* Return if nothing changed */
> +	if (clk->rate == rate)
> +		return 0;
> +
> +	epll_con = __raw_readl(S5P_EPLL_CON0);
> +	epll_con_k = __raw_readl(S5P_EPLL_CON1);
> +
> +	epll_con_k &= ~(PLL90XX_KDIV_MASK << PLL90XX_KDIV_SHIFT);
> +	epll_con &= ~(PLL90XX_VSEL_MASK << PLL90XX_VSEL_SHIFT |
> +			PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT |
> +			PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT |
> +			PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
> +
> +	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
> +		if (epll_div[i][0] == rate) {
> +			epll_con_k |= epll_div[i][5] << 0;
> +			epll_con |= (epll_div[i][1] << PLL90XX_VSEL_SHIFT |
> +					epll_div[i][2] <<
> PLL90XX_MDIV_SHIFT |
> +					epll_div[i][3] <<
> PLL90XX_PDIV_SHIFT |
> +					epll_div[i][4] <<
> PLL90XX_SDIV_SHIFT);
> +			break;
> +		}
> +	}
> +
> +	if (i == ARRAY_SIZE(epll_div)) {
> +		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
> +				__func__);
> +		return -EINVAL;
> +	}
> +
> +	__raw_writel(epll_con, S5P_EPLL_CON0);
> +	__raw_writel(epll_con_k, S5P_EPLL_CON1);
> +
> +	clk->rate = rate;
> +
> +	return 0;
> +}
> +

Same...

> +static struct clk_ops s5pv210_epll_ops = {
> +	.get_rate = s5pv210_epll_get_rate,
> +	.set_rate = s5pv210_epll_set_rate,
> +};
> +
>  void __init_or_cpufreq s5pv210_setup_clocks(void)
>  {
>  	struct clk *xtal_clk;
> @@ -1022,6 +1113,10 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
>  	unsigned int ptr;
>  	u32 clkdiv0, clkdiv1;
> 
> +	/* Set functions for clk_fout_epll */
> +	clk_fout_epll.enable = s5pv210_epll_enable;
> +	clk_fout_epll.ops = &s5pv210_epll_ops;
> +
>  	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
> 
>  	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
> diff --git a/arch/arm/plat-s5p/include/plat/pll.h
b/arch/arm/plat-s5p/include/plat/pll.h
> index bf28fad..389663a 100644
> --- a/arch/arm/plat-s5p/include/plat/pll.h
> +++ b/arch/arm/plat-s5p/include/plat/pll.h
> @@ -102,6 +102,8 @@ static inline unsigned long s5p_get_pll46xx(unsigned
long
> baseclk,
>  #define PLL90XX_PDIV_SHIFT	(8)
>  #define PLL90XX_SDIV_SHIFT	(0)
>  #define PLL90XX_KDIV_SHIFT	(0)
> +#define PLL90XX_VSEL_MASK	1
> +#define PLL90XX_VSEL_SHIFT	27
> 
>  static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
>  					    u32 pll_con, u32 pll_conk)
> --


Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.




More information about the linux-arm-kernel mailing list