[PATCH 1/6] rtc: rtc-s3c: Fix access unit from byte to word on RTCCON
Kukjin Kim
kgene.kim at samsung.com
Thu Oct 7 19:41:14 EDT 2010
From: Changhwan Youn <chaos.youn at samsung.com>
S3C2410_RTCCON of TYPE_S3C64XX RTC should be read/written by
readw and writew, because TYPE_S3C64XX RTC uses bit 8 and 9.
And TYPE_S3C2410 RTC also can access it by readw and writew.
Signed-off-by: Changhwan Youn <chaos.youn at samsung.com>
[atul.dahiya at samsung.com: tested on smdk2416]
Tested-by: Atul Dahiya <atul.dahiya at samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
Cc: Ben Dooks <ben-linux at fluff.org>
---
drivers/rtc/rtc-s3c.c | 36 ++++++++++++++++++------------------
1 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index f57a87f..4a0b875 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -100,7 +100,7 @@ static int s3c_rtc_setpie(struct device *dev, int enabled)
spin_lock_irq(&s3c_rtc_pie_lock);
if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
- tmp = readb(s3c_rtc_base + S3C2410_RTCCON);
+ tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
tmp &= ~S3C64XX_RTCCON_TICEN;
if (enabled)
@@ -318,7 +318,7 @@ static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
unsigned int ticnt;
if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
- ticnt = readb(s3c_rtc_base + S3C2410_RTCCON);
+ ticnt = readw(s3c_rtc_base + S3C2410_RTCCON);
ticnt &= S3C64XX_RTCCON_TICEN;
} else {
ticnt = readb(s3c_rtc_base + S3C2410_TICNT);
@@ -391,11 +391,11 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
return;
if (!en) {
- tmp = readb(base + S3C2410_RTCCON);
+ tmp = readw(base + S3C2410_RTCCON);
if (s3c_rtc_cpu_type == TYPE_S3C64XX)
tmp &= ~S3C64XX_RTCCON_TICEN;
tmp &= ~S3C2410_RTCCON_RTCEN;
- writeb(tmp, base + S3C2410_RTCCON);
+ writew(tmp, base + S3C2410_RTCCON);
if (s3c_rtc_cpu_type == TYPE_S3C2410) {
tmp = readb(base + S3C2410_TICNT);
@@ -405,25 +405,25 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
} else {
/* re-enable the device, and check it is ok */
- if ((readb(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){
+ if ((readw(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){
dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
- tmp = readb(base + S3C2410_RTCCON);
- writeb(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON);
+ tmp = readw(base + S3C2410_RTCCON);
+ writew(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON);
}
- if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){
+ if ((readw(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){
dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n");
- tmp = readb(base + S3C2410_RTCCON);
- writeb(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON);
+ tmp = readw(base + S3C2410_RTCCON);
+ writew(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON);
}
- if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){
+ if ((readw(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){
dev_info(&pdev->dev, "removing RTCCON_CLKRST\n");
- tmp = readb(base + S3C2410_RTCCON);
- writeb(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON);
+ tmp = readw(base + S3C2410_RTCCON);
+ writew(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON);
}
}
}
@@ -514,8 +514,8 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
s3c_rtc_enable(pdev, 1);
- pr_debug("s3c2410_rtc: RTCCON=%02x\n",
- readb(s3c_rtc_base + S3C2410_RTCCON));
+ pr_debug("s3c2410_rtc: RTCCON=%02x\n",
+ readw(s3c_rtc_base + S3C2410_RTCCON));
device_init_wakeup(&pdev->dev, 1);
@@ -578,7 +578,7 @@ static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
/* save TICNT for anyone using periodic interrupts */
ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
- ticnt_en_save = readb(s3c_rtc_base + S3C2410_RTCCON);
+ ticnt_en_save = readw(s3c_rtc_base + S3C2410_RTCCON);
ticnt_en_save &= S3C64XX_RTCCON_TICEN;
}
s3c_rtc_enable(pdev, 0);
@@ -596,8 +596,8 @@ static int s3c_rtc_resume(struct platform_device *pdev)
s3c_rtc_enable(pdev, 1);
writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
if (s3c_rtc_cpu_type == TYPE_S3C64XX && ticnt_en_save) {
- tmp = readb(s3c_rtc_base + S3C2410_RTCCON);
- writeb(tmp | ticnt_en_save, s3c_rtc_base + S3C2410_RTCCON);
+ tmp = readw(s3c_rtc_base + S3C2410_RTCCON);
+ writew(tmp | ticnt_en_save, s3c_rtc_base + S3C2410_RTCCON);
}
if (device_may_wakeup(&pdev->dev))
--
1.6.2.5
More information about the linux-arm-kernel
mailing list