[PATCH 3/9] ARM: S3C64XX: add touchscreen support for mach-real6410

Kukjin Kim kgene.kim at samsung.com
Mon Oct 18 09:29:26 EDT 2010


Darius Augulis wrote:
> 
> Add touchscreen device support for mach-real6410
> 
> Signed-off-by: Darius Augulis <augulis.darius at gmail.com>
> ---
>  arch/arm/mach-s3c64xx/Kconfig         |    2 ++
>  arch/arm/mach-s3c64xx/mach-real6410.c |   11 +++++++++++
>  2 files changed, 13 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index e4aede1..b706b80 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -107,6 +107,8 @@ config MACH_REAL6410
>  	select S3C_DEV_FB
>  	select S3C64XX_SETUP_FB_24BPP
>  	select S3C_DEV_NAND
> +	select SAMSUNG_DEV_ADC
> +	select SAMSUNG_DEV_TS
>  	help
>  	  Machine support for the CoreWind REAL6410
> 
> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-
> s3c64xx/mach-real6410.c
> index 9fd943d..bad6990 100644
> --- a/arch/arm/mach-s3c64xx/mach-real6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-real6410.c
> @@ -36,11 +36,13 @@
>  #include <mach/regs-srom.h>
>  #include <mach/s3c6410.h>
> 
> +#include <plat/adc.h>
>  #include <plat/cpu.h>
>  #include <plat/devs.h>
>  #include <plat/fb.h>
>  #include <plat/nand.h>
>  #include <plat/regs-serial.h>
> +#include <plat/ts.h>
> 
>  #include <video/platform_lcd.h>
> 
> @@ -191,6 +193,14 @@ static struct platform_device *real6410_devices[]
> __initdata = {
>  	&s3c_device_hsmmc1,
>  	&s3c_device_fb,
>  	&s3c_device_nand,
> +	&s3c_device_adc,
> +	&s3c_device_ts,
> +};
> +
> +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
> +	.delay			= 10000,
> +	.presc			= 49,
> +	.oversampling_shift	= 2,
>  };
> 
>  static void __init real6410_map_io(void)
> @@ -289,6 +299,7 @@ static void __init real6410_machine_init(void)
> 
>  	s3c_fb_set_platdata(&real6410_lcd_pdata);
>  	s3c_nand_set_platdata(&real6410_nand_info);
> +	s3c24xx_ts_set_platdata(&s3c_ts_platform);
> 
>  	/* configure nCS1 width to 16 bits */
> 

No need to add 's3c_adc_setname("s3c64xx-adc")' in mach-s3c64xx?

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.




More information about the linux-arm-kernel mailing list