[PATCH v2 1/1] mx35pdk: add debug board support

[Baruch Siach]

Hi jgq516,

On Wed, Oct 20, 2010 at 05:34:43PM +0800, jgq516 at gmail.com wrote:
> From: Xiao Jiang <jgq516 at gmail.com>
> 
> Enable debug board support for mx35pdk. As suggested
> by Fabio, add MXC_DEBUG_BOARD config and redefinition
> EXPIO_PARENT_INT.
> 
> Signed-off-by: Xiao Jiang <jgq516 at gmail.com>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  arch/arm/mach-mx3/Kconfig         |    1 +
>  arch/arm/mach-mx3/mach-mx35_3ds.c |    8 ++++++++
>  2 files changed, 9 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
> index 85beece..cdf6ac5 100644
> --- a/arch/arm/mach-mx3/Kconfig
> +++ b/arch/arm/mach-mx3/Kconfig

[snip]

> @@ -95,6 +99,10 @@ static void __init mxc_board_init(void)
>  	imx35_add_imx_uart0(&uart_pdata);
>  
>  	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
> +
> +	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
> +		pr_warn("Init of the debugboard failed, all "
> +			"devices on the board are unusable.\n");
                            ^^^^^
You probably mean debugboard here. I'd change the wording.

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -