[PATCH v2 1/4] ARM: S3C24XX: Fix gpiolib support for ports K..M

[Kukjin Kim]

Yauhen Kharuzhy wrote:
> 
> S3C2443 and S3C2416 has 12 GPIO banks (from A to M), increase
> ARCH_NR_GPIOS for this architectures.
> 
> Also typo from previous commit has been fixed: CONFIG_CPU_S3C24XX
> instead CONFIG_CPU_244X.
> 
> Signed-off-by: Yauhen Kharuzhy <jekhor at gmail.com>
> Tested-by: Vasily Khoruzhick <anarsoul at gmail.com>
> 
> ---
>  arch/arm/mach-s3c2410/include/mach/gpio.h |   10 +++++++---
>  1 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-
> s3c2410/include/mach/gpio.h
> index b649bf2..f7f6b07 100644
> --- a/arch/arm/mach-s3c2410/include/mach/gpio.h
> +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
> @@ -22,6 +22,8 @@
> 
>  #ifdef CONFIG_CPU_S3C244X
>  #define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
> +#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
> +#define ARCH_NR_GPIOS	(32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
>  #else
>  #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
>  #endif
> @@ -30,8 +32,10 @@
>  #include <mach/gpio-nrs.h>
>  #include <mach/gpio-fns.h>
> 
> -#ifdef CONFIG_CPU_S3C24XX
> -#define S3C_GPIO_END	(S3C2410_GPIO_BANKJ + 32)
> +#ifdef CONFIG_CPU_S3C244X
> +#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
> +#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
> +#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
>  #else
> -#define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
> +#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
>  #endif
> --

Looks ok to me...will apply.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.