[PATCH 06/10] OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
Paul Walmsley
paul at pwsan.com
Fri Oct 1 17:35:31 EDT 2010
The OMAP ASoC McBSP code implemented CLKR and FSR signal muxing via
direct System Control Module writes on OMAP2+. This required the
omap_ctrl_{read,write}l() functions to be exported, which is against
policy: the only code that should call those functions directly is
OMAP core code, not device drivers. omap_ctrl_{read,write}*() are no
longer exported, so the driver no longer builds as a module.
Fix the pinmuxing part of the problem by removing calls to
omap_ctrl_{read,write}l() from the OMAP ASoC McBSP code and
implementing signal muxing functions in arch/arm/mach-omap2/mcbsp.c.
Due to the unfortunate way that McBSP support is implemented in ASoC
and the OMAP tree, these symbols must be exported for use by
sound/soc/omap/omap-mcbsp.c.
Going forward, the McBSP device driver should be moved from
arch/arm/*omap* into drivers/ or sound/soc/*, and the CPU DAI driver
should be implemented as a platform_driver as many other ASoC CPU DAI
drivers are. These two steps should resolve many of the layering
problems, which will rapidly reappear during a McBSP hwmod/PM runtime
conversion.
Signed-off-by: Paul Walmsley <paul at pwsan.com>
Cc: Jarkko Nikula <jhnikula at gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi at nokia.com>
---
arch/arm/mach-omap2/mcbsp.c | 30 +++++++++++++++++
arch/arm/plat-omap/include/plat/control.h | 2 +
arch/arm/plat-omap/include/plat/mcbsp.h | 13 +++++++
arch/arm/plat-omap/mcbsp.c | 1 +
sound/soc/omap/omap-mcbsp.c | 52 +++++++++--------------------
5 files changed, 62 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 88b8790..4c9c999 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -22,7 +22,37 @@
#include <plat/dma.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
+#include <plat/control.h>
+/* McBSP internal signal muxing functions */
+
+void omap2_mcbsp1_mux_clkr_src(u8 mux)
+{
+ u32 v;
+
+ v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+ if (mux == CLKR_SRC_CLKR)
+ v &= OMAP2_MCBSP1_CLKR_MASK;
+ else if (mux == CLKR_SRC_CLKX)
+ v |= OMAP2_MCBSP1_CLKR_MASK;
+ omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
+
+void omap2_mcbsp1_mux_fsr_src(u8 mux)
+{
+ u32 v;
+
+ v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+ if (mux == FSR_SRC_FSR)
+ v &= OMAP2_MCBSP1_FSR_MASK;
+ else if (mux == FSR_SRC_FSX)
+ v |= OMAP2_MCBSP1_FSR_MASK;
+ omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
+
+/* Platform data */
#ifdef CONFIG_ARCH_OMAP2420
static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index 19c9b2a..54b0c35 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -223,6 +223,8 @@
#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */
#define OMAP24XX_USBSTANDBYCTRL (1 << 15)
#define OMAP2_MCBSP2_CLKS_MASK (1 << 6)
+#define OMAP2_MCBSP1_FSR_MASK (1 << 4)
+#define OMAP2_MCBSP1_CLKR_MASK (1 << 3)
#define OMAP2_MCBSP1_CLKS_MASK (1 << 2)
/* CONTROL_DEVCONF1 bits */
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index b4ff6a1..886d0e6 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -312,6 +312,14 @@
#define RFSREN 0x0002
#define RSYNCERREN 0x0001
+/* CLKR signal muxing options */
+#define CLKR_SRC_CLKR 0
+#define CLKR_SRC_CLKX 1
+
+/* FSR signal muxing options */
+#define FSR_SRC_FSR 0
+#define FSR_SRC_FSX 1
+
/* we don't do multichannel for now */
struct omap_mcbsp_reg_cfg {
u16 spcr2;
@@ -501,7 +509,6 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng
int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
-
/* SPI specific API */
void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
@@ -510,6 +517,10 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf);
int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
+/* McBSP signal muxing API */
+void omap2_mcbsp1_mux_clkr_src(u8 mux);
+void omap2_mcbsp1_mux_fsr_src(u8 mux);
+
#ifdef CONFIG_ARCH_OMAP3
/* Sidetone specific API */
int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index dcb0926..89d7671 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -27,6 +27,7 @@
#include <plat/dma.h>
#include <plat/mcbsp.h>
+#include <plat/control.h>
#include "../mach-omap2/cm-regbits-34xx.h"
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 86f2139..f50a5ab 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -661,48 +661,23 @@ static int omap_mcbsp_dai_set_clks_src(struct omap_mcbsp_data *mcbsp_data,
return 0;
}
-static int omap_mcbsp_dai_set_rcvr_src(struct omap_mcbsp_data *mcbsp_data,
- int clk_id)
-{
- int sel_bit, set = 0;
- u16 reg = OMAP2_CONTROL_DEVCONF0;
-
- if (cpu_class_is_omap1())
- return -EINVAL; /* TODO: Can this be implemented for OMAP1? */
- if (mcbsp_data->bus_id != 0)
- return -EINVAL;
-
- switch (clk_id) {
- case OMAP_MCBSP_CLKR_SRC_CLKX:
- set = 1;
- case OMAP_MCBSP_CLKR_SRC_CLKR:
- sel_bit = 3;
- break;
- case OMAP_MCBSP_FSR_SRC_FSX:
- set = 1;
- case OMAP_MCBSP_FSR_SRC_FSR:
- sel_bit = 4;
- break;
- default:
- return -EINVAL;
- }
-
- if (set)
- omap_ctrl_writel(omap_ctrl_readl(reg) | (1 << sel_bit), reg);
- else
- omap_ctrl_writel(omap_ctrl_readl(reg) & ~(1 << sel_bit), reg);
-
- return 0;
-}
-
static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq,
int dir)
{
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
+ struct omap_mcbsp_platform_data *pdata = cpu_dai->dev->platform_data;
int err = 0;
+ /* The McBSP signal muxing functions are only available on McBSP1 */
+ if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR ||
+ clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
+ clk_id == OMAP_MCBSP_FSR_SRC_FSR ||
+ clk_id == OMAP_MCBSP_FSR_SRC_FSX)
+ if (cpu_class_is_omap1() || mcbsp_data->bus_id != 0)
+ return -EINVAL;
+
mcbsp_data->in_freq = freq;
switch (clk_id) {
@@ -720,11 +695,18 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
regs->pcr0 |= SCLKME;
break;
+
case OMAP_MCBSP_CLKR_SRC_CLKR:
+ omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR);
+ break;
case OMAP_MCBSP_CLKR_SRC_CLKX:
+ omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX);
+ break;
case OMAP_MCBSP_FSR_SRC_FSR:
+ omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR);
+ break;
case OMAP_MCBSP_FSR_SRC_FSX:
- err = omap_mcbsp_dai_set_rcvr_src(mcbsp_data, clk_id);
+ omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX);
break;
default:
err = -ENODEV;
More information about the linux-arm-kernel
mailing list