[PATCH 40/47] net: davinci_emac: cleanup unused cpdma code
Kevin Hilman
khilman at deeprootsystems.com
Fri Oct 1 17:30:04 EDT 2010
From: Cyril Chemparathy <cyril at ti.com>
Having switched over to the newly introduced cpdma layer, this patch now
removes a whole bunch of code that is now unused. This patch has been
maintained separate strictly for reasons of readability.
Signed-off-by: Cyril Chemparathy <cyril at ti.com>
Acked-by: David S. Miller <davem at davemloft.net>
Tested-by: Michael Williamson <michael.williamson at criticallink.com>
Tested-by: Caglar Akyuz <caglarakyuz at gmail.com>
Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>
---
drivers/net/davinci_emac.c | 930 --------------------------------------------
1 files changed, 0 insertions(+), 930 deletions(-)
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 67dbcfb..2a628d1 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -127,7 +127,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
/* EMAC register related defines */
#define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF)
#define EMAC_NUM_MULTICAST_BITS (64)
-#define EMAC_TEARDOWN_VALUE (0xFFFFFFFC)
#define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1)
#define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1)
#define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2)
@@ -214,24 +213,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
#define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */
/* EMAC Peripheral Device Register Memory Layout structure */
-#define EMAC_TXIDVER 0x0
-#define EMAC_TXCONTROL 0x4
-#define EMAC_TXTEARDOWN 0x8
-#define EMAC_RXIDVER 0x10
-#define EMAC_RXCONTROL 0x14
-#define EMAC_RXTEARDOWN 0x18
-#define EMAC_TXINTSTATRAW 0x80
-#define EMAC_TXINTSTATMASKED 0x84
-#define EMAC_TXINTMASKSET 0x88
-#define EMAC_TXINTMASKCLEAR 0x8C
#define EMAC_MACINVECTOR 0x90
#define EMAC_DM646X_MACEOIVECTOR 0x94
-#define EMAC_RXINTSTATRAW 0xA0
-#define EMAC_RXINTSTATMASKED 0xA4
-#define EMAC_RXINTMASKSET 0xA8
-#define EMAC_RXINTMASKCLEAR 0xAC
#define EMAC_MACINTSTATRAW 0xB0
#define EMAC_MACINTSTATMASKED 0xB4
#define EMAC_MACINTMASKSET 0xB8
@@ -258,12 +243,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
#define EMAC_MACADDRHI 0x504
#define EMAC_MACINDEX 0x508
-/* EMAC HDP and Completion registors */
-#define EMAC_TXHDP(ch) (0x600 + (ch * 4))
-#define EMAC_RXHDP(ch) (0x620 + (ch * 4))
-#define EMAC_TXCP(ch) (0x640 + (ch * 4))
-#define EMAC_RXCP(ch) (0x660 + (ch * 4))
-
/* EMAC statistics registers */
#define EMAC_RXGOODFRAMES 0x200
#define EMAC_RXBCASTFRAMES 0x204
@@ -328,120 +307,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
/* EMAC Stats Clear Mask */
#define EMAC_STATS_CLR_MASK (0xFFFFFFFF)
-/** net_buf_obj: EMAC network bufferdata structure
- *
- * EMAC network buffer data structure
- */
-struct emac_netbufobj {
- void *buf_token;
- char *data_ptr;
- int length;
-};
-
-/** net_pkt_obj: EMAC network packet data structure
- *
- * EMAC network packet data structure - supports buffer list (for future)
- */
-struct emac_netpktobj {
- void *pkt_token; /* data token may hold tx/rx chan id */
- struct emac_netbufobj *buf_list; /* array of network buffer objects */
- int num_bufs;
- int pkt_length;
-};
-
-/** emac_tx_bd: EMAC TX Buffer descriptor data structure
- *
- * EMAC TX Buffer descriptor data structure
- */
-struct emac_tx_bd {
- int h_next;
- int buff_ptr;
- int off_b_len;
- int mode; /* SOP, EOP, ownership, EOQ, teardown,Qstarv, length */
- struct emac_tx_bd __iomem *next;
- void *buf_token;
-};
-
-/** emac_txch: EMAC TX Channel data structure
- *
- * EMAC TX Channel data structure
- */
-struct emac_txch {
- /* Config related */
- u32 num_bd;
- u32 service_max;
-
- /* CPPI specific */
- u32 alloc_size;
- void __iomem *bd_mem;
- struct emac_tx_bd __iomem *bd_pool_head;
- struct emac_tx_bd __iomem *active_queue_head;
- struct emac_tx_bd __iomem *active_queue_tail;
- struct emac_tx_bd __iomem *last_hw_bdprocessed;
- u32 queue_active;
- u32 teardown_pending;
- u32 *tx_complete;
-
- /** statistics */
- u32 proc_count; /* TX: # of times emac_tx_bdproc is called */
- u32 mis_queued_packets;
- u32 queue_reinit;
- u32 end_of_queue_add;
- u32 out_of_tx_bd;
- u32 no_active_pkts; /* IRQ when there were no packets to process */
- u32 active_queue_count;
-};
-
-/** emac_rx_bd: EMAC RX Buffer descriptor data structure
- *
- * EMAC RX Buffer descriptor data structure
- */
-struct emac_rx_bd {
- int h_next;
- int buff_ptr;
- int off_b_len;
- int mode;
- struct emac_rx_bd __iomem *next;
- void *data_ptr;
- void *buf_token;
-};
-
-/** emac_rxch: EMAC RX Channel data structure
- *
- * EMAC RX Channel data structure
- */
-struct emac_rxch {
- /* configuration info */
- u32 num_bd;
- u32 service_max;
- u32 buf_size;
- char mac_addr[6];
-
- /** CPPI specific */
- u32 alloc_size;
- void __iomem *bd_mem;
- struct emac_rx_bd __iomem *bd_pool_head;
- struct emac_rx_bd __iomem *active_queue_head;
- struct emac_rx_bd __iomem *active_queue_tail;
- u32 queue_active;
- u32 teardown_pending;
-
- /* packet and buffer objects */
- struct emac_netpktobj pkt_queue;
- struct emac_netbufobj buf_queue;
-
- /** statistics */
- u32 proc_count; /* number of times emac_rx_bdproc is called */
- u32 processed_bd;
- u32 recycled_bd;
- u32 out_of_rx_bd;
- u32 out_of_rx_buffers;
- u32 queue_reinit;
- u32 end_of_queue_add;
- u32 end_of_queue;
- u32 mis_queued_packets;
-};
-
/* emac_priv: EMAC private data structure
*
* EMAC adapter private data structure
@@ -452,17 +317,10 @@ struct emac_priv {
struct platform_device *pdev;
struct napi_struct napi;
char mac_addr[6];
- spinlock_t tx_lock;
- spinlock_t rx_lock;
void __iomem *remap_addr;
u32 emac_base_phys;
void __iomem *emac_base;
void __iomem *ctrl_base;
- void __iomem *emac_ctrl_ram;
- u32 ctrl_ram_size;
- u32 hw_ram_addr;
- struct emac_txch *txch[EMAC_DEF_MAX_TX_CH];
- struct emac_rxch *rxch[EMAC_DEF_MAX_RX_CH];
struct cpdma_ctlr *dma;
struct cpdma_chan *txchan;
struct cpdma_chan *rxchan;
@@ -491,18 +349,6 @@ struct emac_priv {
static struct clk *emac_clk;
static unsigned long emac_bus_frequency;
-#define emac_virt_to_phys(addr, priv) \
- (((u32 __force)(addr) - (u32 __force)(priv->emac_ctrl_ram)) \
- + priv->hw_ram_addr)
-
-/* Cache macros - Packet buffers would be from skb pool which is cached */
-#define EMAC_VIRT_NOCACHE(addr) (addr)
-
-/* DM644x does not have BD's in cached memory - so no cache functions */
-#define BD_CACHE_INVALIDATE(addr, size)
-#define BD_CACHE_WRITEBACK(addr, size)
-#define BD_CACHE_WRITEBACK_INVALIDATE(addr, size)
-
/* EMAC TX Host Error description strings */
static char *emac_txhost_errcodes[16] = {
"No error", "SOP error", "Ownership bit not set in SOP buffer",
@@ -545,20 +391,6 @@ static void emac_dump_regs(struct emac_priv *priv)
emac_ctrl_read(EMAC_CTRL_EWCTL),
emac_ctrl_read(EMAC_CTRL_EWINTTCNT));
}
- dev_info(emac_dev, "EMAC: TXID: %08X %s, RXID: %08X %s\n",
- emac_read(EMAC_TXIDVER),
- ((emac_read(EMAC_TXCONTROL)) ? "enabled" : "disabled"),
- emac_read(EMAC_RXIDVER),
- ((emac_read(EMAC_RXCONTROL)) ? "enabled" : "disabled"));
- dev_info(emac_dev, "EMAC: TXIntRaw:%08X, TxIntMasked: %08X, "\
- "TxIntMasSet: %08X\n", emac_read(EMAC_TXINTSTATRAW),
- emac_read(EMAC_TXINTSTATMASKED), emac_read(EMAC_TXINTMASKSET));
- dev_info(emac_dev, "EMAC: RXIntRaw:%08X, RxIntMasked: %08X, "\
- "RxIntMasSet: %08X\n", emac_read(EMAC_RXINTSTATRAW),
- emac_read(EMAC_RXINTSTATMASKED), emac_read(EMAC_RXINTMASKSET));
- dev_info(emac_dev, "EMAC: MacIntRaw:%08X, MacIntMasked: %08X, "\
- "MacInVector=%08X\n", emac_read(EMAC_MACINTSTATRAW),
- emac_read(EMAC_MACINTSTATMASKED), emac_read(EMAC_MACINVECTOR));
dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n",
emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL));
dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\
@@ -567,8 +399,6 @@ static void emac_dump_regs(struct emac_priv *priv)
dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\
"MacConfig=%08X\n", emac_read(EMAC_MACCONTROL),
emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG));
- dev_info(emac_dev, "EMAC: TXHDP[0]:%08X, RXHDP[0]: %08X\n",
- emac_read(EMAC_TXHDP(0)), emac_read(EMAC_RXHDP(0)));
dev_info(emac_dev, "EMAC Statistics\n");
dev_info(emac_dev, "EMAC: rx_good_frames:%d\n",
emac_read(EMAC_RXGOODFRAMES));
@@ -1223,373 +1053,6 @@ static void emac_tx_handler(void *token, int len, int status)
dev_kfree_skb_any(skb);
}
-/** EMAC on-chip buffer descriptor memory
- *
- * WARNING: Please note that the on chip memory is used for both TX and RX
- * buffer descriptor queues and is equally divided between TX and RX desc's
- * If the number of TX or RX descriptors change this memory pointers need
- * to be adjusted. If external memory is allocated then these pointers can
- * pointer to the memory
- *
- */
-#define EMAC_TX_BD_MEM(priv) ((priv)->emac_ctrl_ram)
-#define EMAC_RX_BD_MEM(priv) ((priv)->emac_ctrl_ram + \
- (((priv)->ctrl_ram_size) >> 1))
-
-/**
- * emac_init_txch: TX channel initialization
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: RX channel number
- *
- * Called during device init to setup a TX channel (allocate buffer desc
- * create free pool and keep ready for transmission
- *
- * Returns success(0) or mem alloc failures error code
- */
-static int emac_init_txch(struct emac_priv *priv, u32 ch)
-{
- struct device *emac_dev = &priv->ndev->dev;
- u32 cnt, bd_size;
- void __iomem *mem;
- struct emac_tx_bd __iomem *curr_bd;
- struct emac_txch *txch = NULL;
-
- txch = kzalloc(sizeof(struct emac_txch), GFP_KERNEL);
- if (NULL == txch) {
- dev_err(emac_dev, "DaVinci EMAC: TX Ch mem alloc failed");
- return -ENOMEM;
- }
- priv->txch[ch] = txch;
- txch->service_max = EMAC_DEF_TX_MAX_SERVICE;
- txch->active_queue_head = NULL;
- txch->active_queue_tail = NULL;
- txch->queue_active = 0;
- txch->teardown_pending = 0;
-
- /* allocate memory for TX CPPI channel on a 4 byte boundry */
- txch->tx_complete = kzalloc(txch->service_max * sizeof(u32),
- GFP_KERNEL);
- if (NULL == txch->tx_complete) {
- dev_err(emac_dev, "DaVinci EMAC: Tx service mem alloc failed");
- kfree(txch);
- return -ENOMEM;
- }
-
- /* allocate buffer descriptor pool align every BD on four word
- * boundry for future requirements */
- bd_size = (sizeof(struct emac_tx_bd) + 0xF) & ~0xF;
- txch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size;
- txch->alloc_size = (((bd_size * txch->num_bd) + 0xF) & ~0xF);
-
- /* alloc TX BD memory */
- txch->bd_mem = EMAC_TX_BD_MEM(priv);
- __memzero((void __force *)txch->bd_mem, txch->alloc_size);
-
- /* initialize the BD linked list */
- mem = (void __force __iomem *)
- (((u32 __force) txch->bd_mem + 0xF) & ~0xF);
- txch->bd_pool_head = NULL;
- for (cnt = 0; cnt < txch->num_bd; cnt++) {
- curr_bd = mem + (cnt * bd_size);
- curr_bd->next = txch->bd_pool_head;
- txch->bd_pool_head = curr_bd;
- }
-
- /* reset statistics counters */
- txch->out_of_tx_bd = 0;
- txch->no_active_pkts = 0;
- txch->active_queue_count = 0;
-
- return 0;
-}
-
-/**
- * emac_cleanup_txch: Book-keep function to clean TX channel resources
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: TX channel number
- *
- * Called to clean up TX channel resources
- *
- */
-static void emac_cleanup_txch(struct emac_priv *priv, u32 ch)
-{
- struct emac_txch *txch = priv->txch[ch];
-
- if (txch) {
- if (txch->bd_mem)
- txch->bd_mem = NULL;
- kfree(txch->tx_complete);
- kfree(txch);
- priv->txch[ch] = NULL;
- }
-}
-
-/**
- * emac_net_tx_complete: TX packet completion function
- * @priv: The DaVinci EMAC private adapter structure
- * @net_data_tokens: packet token - skb pointer
- * @num_tokens: number of skb's to free
- * @ch: TX channel number
- *
- * Frees the skb once packet is transmitted
- *
- */
-static int emac_net_tx_complete(struct emac_priv *priv,
- void **net_data_tokens,
- int num_tokens, u32 ch)
-{
- struct net_device *ndev = priv->ndev;
- u32 cnt;
-
- if (unlikely(num_tokens && netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
- for (cnt = 0; cnt < num_tokens; cnt++) {
- struct sk_buff *skb = (struct sk_buff *)net_data_tokens[cnt];
- if (skb == NULL)
- continue;
- ndev->stats.tx_packets++;
- ndev->stats.tx_bytes += skb->len;
- dev_kfree_skb_any(skb);
- }
- return 0;
-}
-
-/**
- * emac_txch_teardown: TX channel teardown
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: TX channel number
- *
- * Called to teardown TX channel
- *
- */
-static void emac_txch_teardown(struct emac_priv *priv, u32 ch)
-{
- struct device *emac_dev = &priv->ndev->dev;
- u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */
- struct emac_txch *txch = priv->txch[ch];
- struct emac_tx_bd __iomem *curr_bd;
-
- while ((emac_read(EMAC_TXCP(ch)) & EMAC_TEARDOWN_VALUE) !=
- EMAC_TEARDOWN_VALUE) {
- /* wait till tx teardown complete */
- cpu_relax(); /* TODO: check if this helps ... */
- --teardown_cnt;
- if (0 == teardown_cnt) {
- dev_err(emac_dev, "EMAC: TX teardown aborted\n");
- break;
- }
- }
- emac_write(EMAC_TXCP(ch), EMAC_TEARDOWN_VALUE);
-
- /* process sent packets and return skb's to upper layer */
- if (1 == txch->queue_active) {
- curr_bd = txch->active_queue_head;
- while (curr_bd != NULL) {
- dma_unmap_single(emac_dev, curr_bd->buff_ptr,
- curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE,
- DMA_TO_DEVICE);
-
- emac_net_tx_complete(priv, (void __force *)
- &curr_bd->buf_token, 1, ch);
- if (curr_bd != txch->active_queue_tail)
- curr_bd = curr_bd->next;
- else
- break;
- }
- txch->bd_pool_head = txch->active_queue_head;
- txch->active_queue_head =
- txch->active_queue_tail = NULL;
- }
-}
-
-/**
- * emac_stop_txch: Stop TX channel operation
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: TX channel number
- *
- * Called to stop TX channel operation
- *
- */
-static void emac_stop_txch(struct emac_priv *priv, u32 ch)
-{
- struct emac_txch *txch = priv->txch[ch];
-
- if (txch) {
- txch->teardown_pending = 1;
- emac_write(EMAC_TXTEARDOWN, 0);
- emac_txch_teardown(priv, ch);
- txch->teardown_pending = 0;
- emac_write(EMAC_TXINTMASKCLEAR, BIT(ch));
- }
-}
-
-/**
- * emac_tx_bdproc: TX buffer descriptor (packet) processing
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: TX channel number to process buffer descriptors for
- * @budget: number of packets allowed to process
- * @pending: indication to caller that packets are pending to process
- *
- * Processes TX buffer descriptors after packets are transmitted - checks
- * ownership bit on the TX * descriptor and requeues it to free pool & frees
- * the SKB buffer. Only "budget" number of packets are processed and
- * indication of pending packets provided to the caller
- *
- * Returns number of packets processed
- */
-static int emac_tx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
-{
- struct device *emac_dev = &priv->ndev->dev;
- unsigned long flags;
- u32 frame_status;
- u32 pkts_processed = 0;
- u32 tx_complete_cnt = 0;
- struct emac_tx_bd __iomem *curr_bd;
- struct emac_txch *txch = priv->txch[ch];
- u32 *tx_complete_ptr = txch->tx_complete;
-
- if (unlikely(1 == txch->teardown_pending)) {
- if (netif_msg_tx_err(priv) && net_ratelimit()) {
- dev_err(emac_dev, "DaVinci EMAC:emac_tx_bdproc: "\
- "teardown pending\n");
- }
- return 0; /* dont handle any pkt completions */
- }
-
- ++txch->proc_count;
- spin_lock_irqsave(&priv->tx_lock, flags);
- curr_bd = txch->active_queue_head;
- if (NULL == curr_bd) {
- emac_write(EMAC_TXCP(ch),
- emac_virt_to_phys(txch->last_hw_bdprocessed, priv));
- txch->no_active_pkts++;
- spin_unlock_irqrestore(&priv->tx_lock, flags);
- return 0;
- }
- BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
- frame_status = curr_bd->mode;
- while ((curr_bd) &&
- ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) &&
- (pkts_processed < budget)) {
- emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd, priv));
- txch->active_queue_head = curr_bd->next;
- if (frame_status & EMAC_CPPI_EOQ_BIT) {
- if (curr_bd->next) { /* misqueued packet */
- emac_write(EMAC_TXHDP(ch), curr_bd->h_next);
- ++txch->mis_queued_packets;
- } else {
- txch->queue_active = 0; /* end of queue */
- }
- }
-
- dma_unmap_single(emac_dev, curr_bd->buff_ptr,
- curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE,
- DMA_TO_DEVICE);
-
- *tx_complete_ptr = (u32) curr_bd->buf_token;
- ++tx_complete_ptr;
- ++tx_complete_cnt;
- curr_bd->next = txch->bd_pool_head;
- txch->bd_pool_head = curr_bd;
- --txch->active_queue_count;
- pkts_processed++;
- txch->last_hw_bdprocessed = curr_bd;
- curr_bd = txch->active_queue_head;
- if (curr_bd) {
- BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
- frame_status = curr_bd->mode;
- }
- } /* end of pkt processing loop */
-
- emac_net_tx_complete(priv,
- (void *)&txch->tx_complete[0],
- tx_complete_cnt, ch);
- spin_unlock_irqrestore(&priv->tx_lock, flags);
- return pkts_processed;
-}
-
-#define EMAC_ERR_TX_OUT_OF_BD -1
-
-/**
- * emac_send: EMAC Transmit function (internal)
- * @priv: The DaVinci EMAC private adapter structure
- * @pkt: packet pointer (contains skb ptr)
- * @ch: TX channel number
- *
- * Called by the transmit function to queue the packet in EMAC hardware queue
- *
- * Returns success(0) or error code (typically out of desc's)
- */
-static int emac_send(struct emac_priv *priv, struct emac_netpktobj *pkt, u32 ch)
-{
- unsigned long flags;
- struct emac_tx_bd __iomem *curr_bd;
- struct emac_txch *txch;
- struct emac_netbufobj *buf_list;
-
- txch = priv->txch[ch];
- buf_list = pkt->buf_list; /* get handle to the buffer array */
-
- /* check packet size and pad if short */
- if (pkt->pkt_length < EMAC_DEF_MIN_ETHPKTSIZE) {
- buf_list->length += (EMAC_DEF_MIN_ETHPKTSIZE - pkt->pkt_length);
- pkt->pkt_length = EMAC_DEF_MIN_ETHPKTSIZE;
- }
-
- spin_lock_irqsave(&priv->tx_lock, flags);
- curr_bd = txch->bd_pool_head;
- if (curr_bd == NULL) {
- txch->out_of_tx_bd++;
- spin_unlock_irqrestore(&priv->tx_lock, flags);
- return EMAC_ERR_TX_OUT_OF_BD;
- }
-
- txch->bd_pool_head = curr_bd->next;
- curr_bd->buf_token = buf_list->buf_token;
- curr_bd->buff_ptr = dma_map_single(&priv->ndev->dev, buf_list->data_ptr,
- buf_list->length, DMA_TO_DEVICE);
- curr_bd->off_b_len = buf_list->length;
- curr_bd->h_next = 0;
- curr_bd->next = NULL;
- curr_bd->mode = (EMAC_CPPI_SOP_BIT | EMAC_CPPI_OWNERSHIP_BIT |
- EMAC_CPPI_EOP_BIT | pkt->pkt_length);
-
- /* flush the packet from cache if write back cache is present */
- BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
-
- /* send the packet */
- if (txch->active_queue_head == NULL) {
- txch->active_queue_head = curr_bd;
- txch->active_queue_tail = curr_bd;
- if (1 != txch->queue_active) {
- emac_write(EMAC_TXHDP(ch),
- emac_virt_to_phys(curr_bd, priv));
- txch->queue_active = 1;
- }
- ++txch->queue_reinit;
- } else {
- register struct emac_tx_bd __iomem *tail_bd;
- register u32 frame_status;
-
- tail_bd = txch->active_queue_tail;
- tail_bd->next = curr_bd;
- txch->active_queue_tail = curr_bd;
- tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
- tail_bd->h_next = (int)emac_virt_to_phys(curr_bd, priv);
- frame_status = tail_bd->mode;
- if (frame_status & EMAC_CPPI_EOQ_BIT) {
- emac_write(EMAC_TXHDP(ch),
- emac_virt_to_phys(curr_bd, priv));
- frame_status &= ~(EMAC_CPPI_EOQ_BIT);
- tail_bd->mode = frame_status;
- ++txch->end_of_queue_add;
- }
- }
- txch->active_queue_count++;
- spin_unlock_irqrestore(&priv->tx_lock, flags);
- return 0;
-}
-
/**
* emac_dev_xmit: EMAC Transmit function
* @skb: SKB pointer
@@ -1664,207 +1127,6 @@ static void emac_dev_tx_timeout(struct net_device *ndev)
}
/**
- * emac_net_alloc_rx_buf: Allocate a skb for RX
- * @priv: The DaVinci EMAC private adapter structure
- * @buf_size: size of SKB data buffer to allocate
- * @data_token: data token returned (skb handle for storing in buffer desc)
- * @ch: RX channel number
- *
- * Called during RX channel setup - allocates skb buffer of required size
- * and provides the skb handle and allocated buffer data pointer to caller
- *
- * Returns skb data pointer or 0 on failure to alloc skb
- */
-static void *emac_net_alloc_rx_buf(struct emac_priv *priv, int buf_size,
- void **data_token, u32 ch)
-{
- struct net_device *ndev = priv->ndev;
- struct device *emac_dev = &ndev->dev;
- struct sk_buff *p_skb;
-
- p_skb = dev_alloc_skb(buf_size);
- if (unlikely(NULL == p_skb)) {
- if (netif_msg_rx_err(priv) && net_ratelimit())
- dev_err(emac_dev, "DaVinci EMAC: failed to alloc skb");
- return NULL;
- }
-
- /* set device pointer in skb and reserve space for extra bytes */
- p_skb->dev = ndev;
- skb_reserve(p_skb, NET_IP_ALIGN);
- *data_token = (void *) p_skb;
- return p_skb->data;
-}
-
-/**
- * emac_init_rxch: RX channel initialization
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: RX channel number
- * @param: mac address for RX channel
- *
- * Called during device init to setup a RX channel (allocate buffers and
- * buffer descriptors, create queue and keep ready for reception
- *
- * Returns success(0) or mem alloc failures error code
- */
-static int emac_init_rxch(struct emac_priv *priv, u32 ch, char *param)
-{
- struct device *emac_dev = &priv->ndev->dev;
- u32 cnt, bd_size;
- void __iomem *mem;
- struct emac_rx_bd __iomem *curr_bd;
- struct emac_rxch *rxch = NULL;
-
- rxch = kzalloc(sizeof(struct emac_rxch), GFP_KERNEL);
- if (NULL == rxch) {
- dev_err(emac_dev, "DaVinci EMAC: RX Ch mem alloc failed");
- return -ENOMEM;
- }
- priv->rxch[ch] = rxch;
- rxch->buf_size = priv->rx_buf_size;
- rxch->service_max = EMAC_DEF_RX_MAX_SERVICE;
- rxch->queue_active = 0;
- rxch->teardown_pending = 0;
-
- /* save mac address */
- for (cnt = 0; cnt < 6; cnt++)
- rxch->mac_addr[cnt] = param[cnt];
-
- /* allocate buffer descriptor pool align every BD on four word
- * boundry for future requirements */
- bd_size = (sizeof(struct emac_rx_bd) + 0xF) & ~0xF;
- rxch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size;
- rxch->alloc_size = (((bd_size * rxch->num_bd) + 0xF) & ~0xF);
- rxch->bd_mem = EMAC_RX_BD_MEM(priv);
- __memzero((void __force *)rxch->bd_mem, rxch->alloc_size);
- rxch->pkt_queue.buf_list = &rxch->buf_queue;
-
- /* allocate RX buffer and initialize the BD linked list */
- mem = (void __force __iomem *)
- (((u32 __force) rxch->bd_mem + 0xF) & ~0xF);
- rxch->active_queue_head = NULL;
- rxch->active_queue_tail = mem;
- for (cnt = 0; cnt < rxch->num_bd; cnt++) {
- curr_bd = mem + (cnt * bd_size);
- /* for future use the last parameter contains the BD ptr */
- curr_bd->data_ptr = emac_net_alloc_rx_buf(priv,
- rxch->buf_size,
- (void __force **)&curr_bd->buf_token,
- EMAC_DEF_RX_CH);
- if (curr_bd->data_ptr == NULL) {
- dev_err(emac_dev, "DaVinci EMAC: RX buf mem alloc " \
- "failed for ch %d\n", ch);
- kfree(rxch);
- return -ENOMEM;
- }
-
- /* populate the hardware descriptor */
- curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head,
- priv);
- curr_bd->buff_ptr = dma_map_single(emac_dev, curr_bd->data_ptr,
- rxch->buf_size, DMA_FROM_DEVICE);
- curr_bd->off_b_len = rxch->buf_size;
- curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT;
-
- /* write back to hardware memory */
- BD_CACHE_WRITEBACK_INVALIDATE((u32) curr_bd,
- EMAC_BD_LENGTH_FOR_CACHE);
- curr_bd->next = rxch->active_queue_head;
- rxch->active_queue_head = curr_bd;
- }
-
- /* At this point rxCppi->activeQueueHead points to the first
- RX BD ready to be given to RX HDP and rxch->active_queue_tail
- points to the last RX BD
- */
- return 0;
-}
-
-/**
- * emac_rxch_teardown: RX channel teardown
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: RX channel number
- *
- * Called during device stop to teardown RX channel
- *
- */
-static void emac_rxch_teardown(struct emac_priv *priv, u32 ch)
-{
- struct device *emac_dev = &priv->ndev->dev;
- u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */
-
- while ((emac_read(EMAC_RXCP(ch)) & EMAC_TEARDOWN_VALUE) !=
- EMAC_TEARDOWN_VALUE) {
- /* wait till tx teardown complete */
- cpu_relax(); /* TODO: check if this helps ... */
- --teardown_cnt;
- if (0 == teardown_cnt) {
- dev_err(emac_dev, "EMAC: RX teardown aborted\n");
- break;
- }
- }
- emac_write(EMAC_RXCP(ch), EMAC_TEARDOWN_VALUE);
-}
-
-/**
- * emac_stop_rxch: Stop RX channel operation
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: RX channel number
- *
- * Called during device stop to stop RX channel operation
- *
- */
-static void emac_stop_rxch(struct emac_priv *priv, u32 ch)
-{
- struct emac_rxch *rxch = priv->rxch[ch];
-
- if (rxch) {
- rxch->teardown_pending = 1;
- emac_write(EMAC_RXTEARDOWN, ch);
- /* wait for teardown complete */
- emac_rxch_teardown(priv, ch);
- rxch->teardown_pending = 0;
- emac_write(EMAC_RXINTMASKCLEAR, BIT(ch));
- }
-}
-
-/**
- * emac_cleanup_rxch: Book-keep function to clean RX channel resources
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: RX channel number
- *
- * Called during device stop to clean up RX channel resources
- *
- */
-static void emac_cleanup_rxch(struct emac_priv *priv, u32 ch)
-{
- struct emac_rxch *rxch = priv->rxch[ch];
- struct emac_rx_bd __iomem *curr_bd;
-
- if (rxch) {
- /* free the receive buffers previously allocated */
- curr_bd = rxch->active_queue_head;
- while (curr_bd) {
- if (curr_bd->buf_token) {
- dma_unmap_single(&priv->ndev->dev,
- curr_bd->buff_ptr,
- curr_bd->off_b_len
- & EMAC_RX_BD_BUF_SIZE,
- DMA_FROM_DEVICE);
-
- dev_kfree_skb_any((struct sk_buff *)\
- curr_bd->buf_token);
- }
- curr_bd = curr_bd->next;
- }
- if (rxch->bd_mem)
- rxch->bd_mem = NULL;
- kfree(rxch);
- priv->rxch[ch] = NULL;
- }
-}
-
-/**
* emac_set_type0addr: Set EMAC Type0 mac address
* @priv: The DaVinci EMAC private adapter structure
* @ch: RX channel number
@@ -2004,194 +1266,6 @@ static int emac_dev_setmac_addr(struct net_device *ndev, void *addr)
}
/**
- * emac_addbd_to_rx_queue: Recycle RX buffer descriptor
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: RX channel number to process buffer descriptors for
- * @curr_bd: current buffer descriptor
- * @buffer: buffer pointer for descriptor
- * @buf_token: buffer token (stores skb information)
- *
- * Prepares the recycled buffer descriptor and addes it to hardware
- * receive queue - if queue empty this descriptor becomes the head
- * else addes the descriptor to end of queue
- *
- */
-static void emac_addbd_to_rx_queue(struct emac_priv *priv, u32 ch,
- struct emac_rx_bd __iomem *curr_bd,
- char *buffer, void *buf_token)
-{
- struct emac_rxch *rxch = priv->rxch[ch];
-
- /* populate the hardware descriptor */
- curr_bd->h_next = 0;
- curr_bd->buff_ptr = dma_map_single(&priv->ndev->dev, buffer,
- rxch->buf_size, DMA_FROM_DEVICE);
- curr_bd->off_b_len = rxch->buf_size;
- curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT;
- curr_bd->next = NULL;
- curr_bd->data_ptr = buffer;
- curr_bd->buf_token = buf_token;
-
- /* write back */
- BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
- if (rxch->active_queue_head == NULL) {
- rxch->active_queue_head = curr_bd;
- rxch->active_queue_tail = curr_bd;
- if (0 != rxch->queue_active) {
- emac_write(EMAC_RXHDP(ch),
- emac_virt_to_phys(rxch->active_queue_head, priv));
- rxch->queue_active = 1;
- }
- } else {
- struct emac_rx_bd __iomem *tail_bd;
- u32 frame_status;
-
- tail_bd = rxch->active_queue_tail;
- rxch->active_queue_tail = curr_bd;
- tail_bd->next = curr_bd;
- tail_bd = EMAC_VIRT_NOCACHE(tail_bd);
- tail_bd->h_next = emac_virt_to_phys(curr_bd, priv);
- frame_status = tail_bd->mode;
- if (frame_status & EMAC_CPPI_EOQ_BIT) {
- emac_write(EMAC_RXHDP(ch),
- emac_virt_to_phys(curr_bd, priv));
- frame_status &= ~(EMAC_CPPI_EOQ_BIT);
- tail_bd->mode = frame_status;
- ++rxch->end_of_queue_add;
- }
- }
- ++rxch->recycled_bd;
-}
-
-/**
- * emac_net_rx_cb: Prepares packet and sends to upper layer
- * @priv: The DaVinci EMAC private adapter structure
- * @net_pkt_list: Network packet list (received packets)
- *
- * Invalidates packet buffer memory and sends the received packet to upper
- * layer
- *
- * Returns success or appropriate error code (none as of now)
- */
-static int emac_net_rx_cb(struct emac_priv *priv,
- struct emac_netpktobj *net_pkt_list)
-{
- struct net_device *ndev = priv->ndev;
- struct sk_buff *p_skb = net_pkt_list->pkt_token;
- /* set length of packet */
- skb_put(p_skb, net_pkt_list->pkt_length);
- p_skb->protocol = eth_type_trans(p_skb, priv->ndev);
- netif_receive_skb(p_skb);
- ndev->stats.rx_bytes += net_pkt_list->pkt_length;
- ndev->stats.rx_packets++;
- return 0;
-}
-
-/**
- * emac_rx_bdproc: RX buffer descriptor (packet) processing
- * @priv: The DaVinci EMAC private adapter structure
- * @ch: RX channel number to process buffer descriptors for
- * @budget: number of packets allowed to process
- * @pending: indication to caller that packets are pending to process
- *
- * Processes RX buffer descriptors - checks ownership bit on the RX buffer
- * descriptor, sends the receive packet to upper layer, allocates a new SKB
- * and recycles the buffer descriptor (requeues it in hardware RX queue).
- * Only "budget" number of packets are processed and indication of pending
- * packets provided to the caller.
- *
- * Returns number of packets processed (and indication of pending packets)
- */
-static int emac_rx_bdproc(struct emac_priv *priv, u32 ch, u32 budget)
-{
- unsigned long flags;
- u32 frame_status;
- u32 pkts_processed = 0;
- char *new_buffer;
- struct emac_rx_bd __iomem *curr_bd;
- struct emac_rx_bd __iomem *last_bd;
- struct emac_netpktobj *curr_pkt, pkt_obj;
- struct emac_netbufobj buf_obj;
- struct emac_netbufobj *rx_buf_obj;
- void *new_buf_token;
- struct emac_rxch *rxch = priv->rxch[ch];
-
- if (unlikely(1 == rxch->teardown_pending))
- return 0;
- ++rxch->proc_count;
- spin_lock_irqsave(&priv->rx_lock, flags);
- pkt_obj.buf_list = &buf_obj;
- curr_pkt = &pkt_obj;
- curr_bd = rxch->active_queue_head;
- BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
- frame_status = curr_bd->mode;
-
- while ((curr_bd) &&
- ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) &&
- (pkts_processed < budget)) {
-
- new_buffer = emac_net_alloc_rx_buf(priv, rxch->buf_size,
- &new_buf_token, EMAC_DEF_RX_CH);
- if (unlikely(NULL == new_buffer)) {
- ++rxch->out_of_rx_buffers;
- goto end_emac_rx_bdproc;
- }
-
- /* populate received packet data structure */
- rx_buf_obj = &curr_pkt->buf_list[0];
- rx_buf_obj->data_ptr = (char *)curr_bd->data_ptr;
- rx_buf_obj->length = curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE;
- rx_buf_obj->buf_token = curr_bd->buf_token;
-
- dma_unmap_single(&priv->ndev->dev, curr_bd->buff_ptr,
- curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE,
- DMA_FROM_DEVICE);
-
- curr_pkt->pkt_token = curr_pkt->buf_list->buf_token;
- curr_pkt->num_bufs = 1;
- curr_pkt->pkt_length =
- (frame_status & EMAC_RX_BD_PKT_LENGTH_MASK);
- emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd, priv));
- ++rxch->processed_bd;
- last_bd = curr_bd;
- curr_bd = last_bd->next;
- rxch->active_queue_head = curr_bd;
-
- /* check if end of RX queue ? */
- if (frame_status & EMAC_CPPI_EOQ_BIT) {
- if (curr_bd) {
- ++rxch->mis_queued_packets;
- emac_write(EMAC_RXHDP(ch),
- emac_virt_to_phys(curr_bd, priv));
- } else {
- ++rxch->end_of_queue;
- rxch->queue_active = 0;
- }
- }
-
- /* recycle BD */
- emac_addbd_to_rx_queue(priv, ch, last_bd, new_buffer,
- new_buf_token);
-
- /* return the packet to the user - BD ptr passed in
- * last parameter for potential *future* use */
- spin_unlock_irqrestore(&priv->rx_lock, flags);
- emac_net_rx_cb(priv, curr_pkt);
- spin_lock_irqsave(&priv->rx_lock, flags);
- curr_bd = rxch->active_queue_head;
- if (curr_bd) {
- BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE);
- frame_status = curr_bd->mode;
- }
- ++pkts_processed;
- }
-
-end_emac_rx_bdproc:
- spin_unlock_irqrestore(&priv->rx_lock, flags);
- return pkts_processed;
-}
-
-/**
* emac_hw_enable: Enable EMAC hardware for packet transmission/reception
* @priv: The DaVinci EMAC private adapter structure
*
@@ -2717,8 +1791,6 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
priv->ndev = ndev;
priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG);
- spin_lock_init(&priv->tx_lock);
- spin_lock_init(&priv->rx_lock);
spin_lock_init(&priv->lock);
pdata = pdev->dev.platform_data;
@@ -2766,8 +1838,6 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev)
ndev->base_addr = (unsigned long)priv->remap_addr;
priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
- priv->ctrl_ram_size = pdata->ctrl_ram_size;
- priv->emac_ctrl_ram = priv->remap_addr + pdata->ctrl_ram_offset;
hw_ram_addr = pdata->hw_ram_addr;
if (!hw_ram_addr)
--
1.7.2.1
More information about the linux-arm-kernel
mailing list