[PATCH 5/9 v2] ARM: S3C64XX: add support for mach-mini6410

[Kukjin Kim]

Darius Augulis wrote:
> 
> Add support for mini6410 board from FriendlyARM
> 
> Signed-off-by: Darius Augulis <augulis.darius at gmail.com>
> ---
> 
> Changelog since v1:
>  - Ben's comments about coding style fixed
> 
>  arch/arm/mach-s3c64xx/Kconfig         |   10 ++
>  arch/arm/mach-s3c64xx/Makefile        |    1
>  arch/arm/mach-s3c64xx/mach-mini6410.c |  157
> +++++++++++++++++++++++++++++++++
>  3 files changed, 168 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-s3c64xx/mach-mini6410.c
> 

(snip)

> +
> +MACHINE_START(MINI6410, "MINI6410")
> +	/* Maintainer: Darius Augulis <augulis.darius at gmail.com> */
> +	.phys_io	= S3C_PA_UART & 0xfff00000,
> +	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,

Now, we no need to add above two members since commit 861bd81ee62a0d6759144c22909a8a3938951656 ("arm: remove machine_desc.io_pg_offst and .phys_io") from the arm tree

> +	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
> +
> +	.init_irq	= s3c6410_init_irq,
> +	.map_io		= mini6410_map_io,
> +	.init_machine	= mini6410_machine_init,
> +	.timer		= &s3c24xx_timer,
> +MACHINE_END

Others, looks ok.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.