[PATCH 14/27] ARM: S5PC100: Change to using s3c_gpio_cfgall_range()

[Kukjin Kim]

From: Ben Dooks <ben-linux at fluff.org>

Change the code setting a range of GPIO pins' configuration and
pull state to use the recently introduced s3c_gpio_cfgall_range().

Mop up a few missed s3c_gpio_cfgpin_range() changes.

Signed-off-by: Ben Dooks <ben-linux at fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
 arch/arm/mach-s5pc100/setup-fb-24bpp.c   |   30 +++++++-----------------
 arch/arm/mach-s5pc100/setup-sdhci-gpio.c |   36 +++++++----------------------
 2 files changed, 18 insertions(+), 48 deletions(-)

diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
index 6eba6cb..5a882d4 100644
--- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
@@ -22,27 +22,15 @@
 
 #define DISR_OFFSET	0x7008
 
-void s5pc100_fb_gpio_setup_24bpp(void)
+static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
 {
-	unsigned int gpio = 0;
-
-	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgall_range(base, nr, S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE);
+}
 
-	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
 }
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index 79b031f..a8d22a7 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -25,8 +25,6 @@
 void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
 	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-	unsigned int end;
 	unsigned int num;
 
 	num = width;
@@ -34,19 +32,13 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 	if (width == 8)
 		num = width - 2;
 
-	end = S5PC100_GPG0(2 + num);
-
 	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
-	s3c_gpio_cfgpin_range(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
-	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++)
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgall_range(S5PC100_GPG0(0), 2 + num,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE);
 
-	if (width == 8) {
-		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
-	}
+	if (width == 8)
+		s3c_gpio_cfgall_range(S5PC100_GPG1(0), 2,
+				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE);
 
 	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
 		s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
@@ -57,15 +49,10 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
 	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG2(2 + width);
 
 	/* Set all the necessary GPG2 pins to special-function 2 */
-	s3c_gpio_cfgpin_range(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
-	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++)
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgall_range(S5PC100_GPG2(0), 2 + width,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE);
 
 	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
 		s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
@@ -76,15 +63,10 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 {
 	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG3(2 + width);
 
 	/* Set all the necessary GPG3 pins to special-function 2 */
-	s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
-	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++)
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgall_range(S5PC100_GPG3(0), 2 + width,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_NONE);
 
 	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
 		s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
-- 
1.6.2.5