[PATCH 4/9] ARM: S3C64XX: add USB host support for mach-real6410

[Kukjin Kim]

Darius Augulis wrote:
> 
> Add USB host device support for mach-real6410
> 
> Signed-off-by: Darius Augulis <augulis.darius at gmail.com>
> ---
>  arch/arm/mach-s3c64xx/Kconfig         |    1 +
>  arch/arm/mach-s3c64xx/mach-real6410.c |    1 +
>  2 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index b706b80..c05ae12 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -109,6 +109,7 @@ config MACH_REAL6410
>  	select S3C_DEV_NAND
>  	select SAMSUNG_DEV_ADC
>  	select SAMSUNG_DEV_TS
> +	select S3C_DEV_USB_HOST
>  	help
>  	  Machine support for the CoreWind REAL6410
> 
> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-
> s3c64xx/mach-real6410.c
> index bad6990..00e7d7e 100644
> --- a/arch/arm/mach-s3c64xx/mach-real6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-real6410.c
> @@ -195,6 +195,7 @@ static struct platform_device *real6410_devices[]
> __initdata = {
>  	&s3c_device_nand,
>  	&s3c_device_adc,
>  	&s3c_device_ts,
> +	&s3c_device_ohci,
>  };
> 
>  static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {

No need any gpio configuration for it?

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.