[PATCH 9/9] ARM: S5PV310: Add audio platform devices
Kyungmin Park
kmpark at infradead.org
Tue Oct 26 00:21:51 EDT 2010
On Tue, Oct 26, 2010 at 10:41 AM, Jassi Brar <jassisinghbrar at gmail.com> wrote:
> From: Jassi Brar <jassi.brar at samsung.com>
>
> Define platform devices for all audio devices found on S5PV310
>
> Signed-off-by: Jassi Brar <jassi.brar at samsung.com>
> ---
> arch/arm/mach-s5pv310/Makefile | 1 +
> arch/arm/mach-s5pv310/dev-audio.c | 364 +++++++++++++++++++++++++++++
> arch/arm/mach-s5pv310/include/mach/map.h | 16 ++
> arch/arm/plat-samsung/include/plat/devs.h | 9 +
> 4 files changed, 390 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-s5pv310/dev-audio.c
>
> diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile
> index d265adb..61e3cb6 100644
> --- a/arch/arm/mach-s5pv310/Makefile
> +++ b/arch/arm/mach-s5pv310/Makefile
> @@ -27,6 +27,7 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
>
> # device support
>
> +obj-y += dev-audio.o
Why it's default build? could you make a config as others?
> obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o
> obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o
> obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o
> diff --git a/arch/arm/mach-s5pv310/dev-audio.c b/arch/arm/mach-s5pv310/dev-audio.c
> new file mode 100644
> index 0000000..18ede29
> --- /dev/null
> +++ b/arch/arm/mach-s5pv310/dev-audio.c
> @@ -0,0 +1,364 @@
> +/* linux/arch/arm/mach-s5pv310/dev-audio.c
> + *
> + * Copyright (c) 2010 Samsung Electronics Co. Ltd
> + * Jaswinder Singh <jassi.brar at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/gpio.h>
> +
> +#include <plat/gpio-cfg.h>
> +#include <plat/audio.h>
> +
> +#include <mach/map.h>
> +#include <mach/dma.h>
> +#include <mach/irqs.h>
> +
> +static const char *rclksrc[] = {
> + [0] = "busclk",
> + [1] = "i2sclk",
> +};
> +
> +static int s5pv310_cfg_i2s(struct platform_device *pdev)
> +{
> + /* configure GPIO for i2s port */
> + switch (pdev->id) {
> + case 0:
> + s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2));
Does it default setup for i2s? In my board some pins are used for
other purpose.
I mean GPZ(1, 5, 6) doesn't used it for I2S.
then how do you handle this one?
> + break;
> + case 1:
> + s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2));
> + break;
> + case 2:
> + s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4));
> + break;
> + default:
> + printk(KERN_ERR "Invalid Device %d\n", pdev->id);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static struct s3c_audio_pdata i2sv5_pdata = {
> + .cfg_gpio = s5pv310_cfg_i2s,
> + .type = {
> + .i2s = {
> + .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
> + | QUIRK_NEED_RSTCLR,
> + .src_clk = rclksrc,
> + },
> + },
> +};
> +
> +static struct resource s5pv310_iis0_resource[] = {
You wrote that there are some users to use iis but c210/v310 doesn't.
So you should use the i2s at least c210/v310 series
> + [0] = {
> + .start = S5PV310_PA_IIS0,
> + .end = S5PV310_PA_IIS0 + 0x100 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = DMACH_I2S0_TX,
> + .end = DMACH_I2S0_TX,
> + .flags = IORESOURCE_DMA,
> + },
> + [2] = {
> + .start = DMACH_I2S0_RX,
> + .end = DMACH_I2S0_RX,
> + .flags = IORESOURCE_DMA,
> + },
> + [3] = {
> + .start = DMACH_I2S0S_TX,
> + .end = DMACH_I2S0S_TX,
> + .flags = IORESOURCE_DMA,
> + },
> +};
> +
> +struct platform_device s5pv310_device_iis0 = {
> + .name = "samsung-i2s",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(s5pv310_iis0_resource),
> + .resource = s5pv310_iis0_resource,
> + .dev = {
> + .platform_data = &i2sv5_pdata,
> + },
> +};
> +
> +static const char *rclksrc_v3[] = {
> + [0] = "sclk_i2s",
> + [1] = "no_such_clock",
> +};
> +
> +static struct s3c_audio_pdata i2sv3_pdata = {
> + .cfg_gpio = s5pv310_cfg_i2s,
> + .type = {
> + .i2s = {
> + .quirks = QUIRK_NO_MUXPSR,
> + .src_clk = rclksrc_v3,
> + },
> + },
> +};
> +
> +static struct resource s5pv310_iis1_resource[] = {
> + [0] = {
> + .start = S5PV310_PA_IIS1,
> + .end = S5PV310_PA_IIS1 + 0x100 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = DMACH_I2S1_TX,
> + .end = DMACH_I2S1_TX,
> + .flags = IORESOURCE_DMA,
> + },
> + [2] = {
> + .start = DMACH_I2S1_RX,
> + .end = DMACH_I2S1_RX,
> + .flags = IORESOURCE_DMA,
> + },
> +};
> +
> +struct platform_device s5pv310_device_iis1 = {
> + .name = "samsung-i2s",
> + .id = 1,
> + .num_resources = ARRAY_SIZE(s5pv310_iis1_resource),
> + .resource = s5pv310_iis1_resource,
> + .dev = {
> + .platform_data = &i2sv3_pdata,
> + },
> +};
> +
> +static struct resource s5pv310_iis2_resource[] = {
> + [0] = {
> + .start = S5PV310_PA_IIS2,
> + .end = S5PV310_PA_IIS2 + 0x100 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = DMACH_I2S2_TX,
> + .end = DMACH_I2S2_TX,
> + .flags = IORESOURCE_DMA,
> + },
> + [2] = {
> + .start = DMACH_I2S2_RX,
> + .end = DMACH_I2S2_RX,
> + .flags = IORESOURCE_DMA,
> + },
> +};
> +
> +struct platform_device s5pv310_device_iis2 = {
> + .name = "samsung-i2s",
> + .id = 2,
> + .num_resources = ARRAY_SIZE(s5pv310_iis2_resource),
> + .resource = s5pv310_iis2_resource,
> + .dev = {
> + .platform_data = &i2sv3_pdata,
> + },
> +};
> +
> +/* PCM Controller platform_devices */
> +
> +static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev)
> +{
> + switch (pdev->id) {
> + case 0:
> + s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3));
> + break;
> + case 1:
> + s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3));
> + break;
> + case 2:
> + s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3));
> + break;
> + default:
> + printk(KERN_DEBUG "Invalid PCM Controller number!");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static struct s3c_audio_pdata s3c_pcm_pdata = {
> + .cfg_gpio = s5pv310_pcm_cfg_gpio,
> +};
> +
> +static struct resource s5pv310_pcm0_resource[] = {
> + [0] = {
> + .start = S5PV310_PA_PCM0,
> + .end = S5PV310_PA_PCM0 + 0x100 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = DMACH_PCM0_TX,
> + .end = DMACH_PCM0_TX,
> + .flags = IORESOURCE_DMA,
> + },
> + [2] = {
> + .start = DMACH_PCM0_RX,
> + .end = DMACH_PCM0_RX,
> + .flags = IORESOURCE_DMA,
> + },
> +};
> +
> +struct platform_device s5pv310_device_pcm0 = {
> + .name = "samsung-pcm",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(s5pv310_pcm0_resource),
> + .resource = s5pv310_pcm0_resource,
> + .dev = {
> + .platform_data = &s3c_pcm_pdata,
> + },
> +};
> +
> +static struct resource s5pv310_pcm1_resource[] = {
> + [0] = {
> + .start = S5PV310_PA_PCM1,
> + .end = S5PV310_PA_PCM1 + 0x100 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = DMACH_PCM1_TX,
> + .end = DMACH_PCM1_TX,
> + .flags = IORESOURCE_DMA,
> + },
> + [2] = {
> + .start = DMACH_PCM1_RX,
> + .end = DMACH_PCM1_RX,
> + .flags = IORESOURCE_DMA,
> + },
> +};
> +
> +struct platform_device s5pv310_device_pcm1 = {
> + .name = "samsung-pcm",
> + .id = 1,
> + .num_resources = ARRAY_SIZE(s5pv310_pcm1_resource),
> + .resource = s5pv310_pcm1_resource,
> + .dev = {
> + .platform_data = &s3c_pcm_pdata,
> + },
> +};
> +
> +static struct resource s5pv310_pcm2_resource[] = {
> + [0] = {
> + .start = S5PV310_PA_PCM2,
> + .end = S5PV310_PA_PCM2 + 0x100 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = DMACH_PCM2_TX,
> + .end = DMACH_PCM2_TX,
> + .flags = IORESOURCE_DMA,
> + },
> + [2] = {
> + .start = DMACH_PCM2_RX,
> + .end = DMACH_PCM2_RX,
> + .flags = IORESOURCE_DMA,
> + },
> +};
> +
> +struct platform_device s5pv310_device_pcm2 = {
> + .name = "samsung-pcm",
> + .id = 2,
> + .num_resources = ARRAY_SIZE(s5pv310_pcm2_resource),
> + .resource = s5pv310_pcm2_resource,
> + .dev = {
> + .platform_data = &s3c_pcm_pdata,
> + },
> +};
> +
> +/* AC97 Controller platform devices */
> +
> +static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev)
> +{
> + return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4));
> +}
> +
> +static struct resource s5pv310_ac97_resource[] = {
> + [0] = {
> + .start = S5PV310_PA_AC97,
> + .end = S5PV310_PA_AC97 + 0x100 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = DMACH_AC97_PCMOUT,
> + .end = DMACH_AC97_PCMOUT,
> + .flags = IORESOURCE_DMA,
> + },
> + [2] = {
> + .start = DMACH_AC97_PCMIN,
> + .end = DMACH_AC97_PCMIN,
> + .flags = IORESOURCE_DMA,
> + },
> + [3] = {
> + .start = DMACH_AC97_MICIN,
> + .end = DMACH_AC97_MICIN,
> + .flags = IORESOURCE_DMA,
> + },
> + [4] = {
> + .start = IRQ_AC97,
> + .end = IRQ_AC97,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct s3c_audio_pdata s3c_ac97_pdata = {
> + .cfg_gpio = s5pv310_ac97_cfg_gpio,
> +};
> +
> +static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32);
> +
> +struct platform_device s5pv310_device_ac97 = {
> + .name = "samsung-ac97",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(s5pv310_ac97_resource),
> + .resource = s5pv310_ac97_resource,
> + .dev = {
> + .platform_data = &s3c_ac97_pdata,
> + .dma_mask = &s5pv310_ac97_dmamask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> +/* S/PDIF Controller platform_device */
> +
> +static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev)
> +{
> + s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3));
> +
> + return 0;
> +}
> +
> +static struct resource s5pv310_spdif_resource[] = {
> + [0] = {
> + .start = S5PV310_PA_SPDIF,
> + .end = S5PV310_PA_SPDIF + 0x100 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = DMACH_SPDIF,
> + .end = DMACH_SPDIF,
> + .flags = IORESOURCE_DMA,
> + },
> +};
> +
> +static struct s3c_audio_pdata samsung_spdif_pdata = {
> + .cfg_gpio = s5pv310_spdif_cfg_gpio,
> +};
> +
> +static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32);
> +
> +struct platform_device s5pv310_device_spdif = {
> + .name = "samsung-spdif",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(s5pv310_spdif_resource),
> + .resource = s5pv310_spdif_resource,
> + .dev = {
> + .platform_data = &samsung_spdif_pdata,
> + .dma_mask = &s5pv310_spdif_dmamask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
> index f6a6587..d99eff3 100644
> --- a/arch/arm/mach-s5pv310/include/mach/map.h
> +++ b/arch/arm/mach-s5pv310/include/mach/map.h
> @@ -61,6 +61,22 @@
>
> #define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
>
> +/* S/PDIF */
> +#define S5PV310_PA_SPDIF 0xE1100000
> +
> +/* I2S */
> +#define S5PV310_PA_IIS0 0x03830000
> +#define S5PV310_PA_IIS1 0xE3100000
> +#define S5PV310_PA_IIS2 0xE2A00000
> +
> +/* PCM */
> +#define S5PV310_PA_PCM0 0x03840000
> +#define S5PV310_PA_PCM1 0x13980000
> +#define S5PV310_PA_PCM2 0x13990000
> +
> +/* AC97 */
> +#define S5PV310_PA_AC97 0x139A0000
> +
> #define S5PV310_PA_UART (0x13800000)
>
> #define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
> diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
> index 16521cc..9764268 100644
> --- a/arch/arm/plat-samsung/include/plat/devs.h
> +++ b/arch/arm/plat-samsung/include/plat/devs.h
> @@ -94,6 +94,15 @@ extern struct platform_device s5pv210_device_iis1;
> extern struct platform_device s5pv210_device_iis2;
> extern struct platform_device s5pv210_device_spdif;
>
> +extern struct platform_device s5pv310_device_ac97;
> +extern struct platform_device s5pv310_device_pcm0;
> +extern struct platform_device s5pv310_device_pcm1;
> +extern struct platform_device s5pv310_device_pcm2;
> +extern struct platform_device s5pv310_device_iis0;
> +extern struct platform_device s5pv310_device_iis1;
> +extern struct platform_device s5pv310_device_iis2;
> +extern struct platform_device s5pv310_device_spdif;
> +
How to make common audio platform data? If not, we should list all
samsung soc audio node in the future.
> extern struct platform_device s5p6442_device_pcm0;
> extern struct platform_device s5p6442_device_pcm1;
> extern struct platform_device s5p6442_device_iis0;
> --
> 1.6.2.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
More information about the linux-arm-kernel
mailing list