[PATCH v2 2/2] ARM: S5PV210: Add init code of audio to Goni and Auqila board

[Kukjin Kim]

Chanwoo Choi wrote:
> 
> This patch add initialization code of audio and I2S platform drivers
> to Goni and Aquila board.
> 
> Signed-off-by : Chanwoo Choi <cw00.choi at samsung.com>
> Signed-off-by : Joonyoung Shim <jy0922.shim at samsung.com>
> Signed-off-by : Kyungmin Park <kyungmin.park at samsung.com>
> Reviewed-by : Mark Brown <broonie at opensource.wolfsonmicro.com>
> ---
>  arch/arm/mach-s5pv210/mach-aquila.c |   24 ++++++++++++++++++++++++
>  arch/arm/mach-s5pv210/mach-goni.c   |   11 +++++++++++
>  2 files changed, 35 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-
> aquila.c
> index 0663ec4..a232937 100644
> --- a/arch/arm/mach-s5pv210/mach-aquila.c
> +++ b/arch/arm/mach-s5pv210/mach-aquila.c
> @@ -507,8 +507,31 @@ static struct platform_device *aquila_devices[] __initdata
> = {
>  	&s5p_device_fimc0,
>  	&s5p_device_fimc1,
>  	&s5p_device_fimc2,
> +	&s5pv210_device_iis0,
>  };
> 
> +static void __init aquila_sound_init(void)
> +{
> +	unsigned int gpio;
> +
> +	/* CODEC_XTAL_EN
> +	 *
> +	 * The Aquila board have a oscillator which provide main clock
> +	 * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
> +	 * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
> +	 * */
> +	gpio = S5PV210_GPH3(2);		/* XEINT_26 */
> +	gpio_request(gpio, "CODEC_XTAL_EN");
> +	s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
> +	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> +
> +	/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
> +	 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
> +	 * because it needs 24MHz clock to operate WM8994 codec.
> +	 */
> +	__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
> +}
> +
>  static void __init aquila_map_io(void)
>  {
>  	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
> @@ -530,6 +553,7 @@ static void __init aquila_machine_init(void)
>  	s3c_fimc_setname(2, "s5p-fimc");
> 
>  	/* SOUND */
> +	aquila_sound_init();
>  	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
>  			ARRAY_SIZE(i2c_gpio5_devs));
> 
> diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-
> goni.c
> index df5c2d1..63855c5 100644
> --- a/arch/arm/mach-s5pv210/mach-goni.c
> +++ b/arch/arm/mach-s5pv210/mach-goni.c
> @@ -488,8 +488,18 @@ static struct platform_device *goni_devices[] __initdata =
> {
>  	&s3c_device_hsmmc0,
>  	&s3c_device_hsmmc1,
>  	&s3c_device_hsmmc2,
> +	&s5pv210_device_iis0,
>  };
> 
> +static void __init goni_sound_init(void)
> +{
> +	/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
> +	 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
> +	 * because it needs 24MHz clock to operate WM8994 codec.
> +	 */
> +	__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
> +}
> +
>  static void __init goni_map_io(void)
>  {
>  	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
> @@ -507,6 +517,7 @@ static void __init goni_machine_init(void)
>  	goni_setup_sdhci();
> 
>  	/* SOUND */
> +	goni_sound_init();
>  	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
>  			ARRAY_SIZE(i2c_gpio5_devs));
> 
> --

Ok...will apply...
And I will think about handling of similar/same platform date later.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.