[PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration
Jeongbae Seo
jeongbae.seo at samsung.com
Tue Oct 5 02:58:26 EDT 2010
Marek Szyprowski wrote:
> Hello,
>
> On Thursday, September 16, 2010 10:37 AM Jeongbae Seo wrote:
>
> > From: Hyuk Lee <hyuk1.lee at samsung.com>
> >
> > This patch adds to support HSMMC for S5PV310 and S5PC210 and setup for
> > HSMMC host controller and also related GPIO.
> > At most 4 channel can be used at the same time.
> > A user can configure SDHCI data bus as 8bit or 4bit.
> >
> > Signed-off-by: Hyuk Lee <hyuk1.lee at samsung.com>
> > Signed-off-by: Jeongbae Seo <jeongbae.seo at samsung.com>
> > ---
> > arch/arm/mach-s5pv310/Kconfig | 39 ++++++++
> > arch/arm/mach-s5pv310/Makefile | 2 +
> > arch/arm/mach-s5pv310/setup-sdhci-gpio.c | 156
> ++++++++++++++++++++++++++++++
> > arch/arm/mach-s5pv310/setup-sdhci.c | 69 +++++++++++++
> > 4 files changed, 266 insertions(+), 0 deletions(-)
> > create mode 100644 arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> > create mode 100644 arch/arm/mach-s5pv310/setup-sdhci.c
> >
>
> <snip>
>
> > diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-
> s5pv310/setup-sdhci-gpio.c
> > new file mode 100644
> > index 0000000..8db8c81
> > --- /dev/null
> > +++ b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> > @@ -0,0 +1,156 @@
> > +/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> > + *
> > + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> > + * http://www.samsung.com/
> > + *
> > + * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO
> (HSMMC)
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > +*/
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/types.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/io.h>
> > +#include <linux/gpio.h>
> > +#include <linux/mmc/host.h>
> > +#include <linux/mmc/card.h>
> > +
> > +#include <plat/gpio-cfg.h>
> > +#include <plat/regs-sdhci.h>
> > +#include <plat/sdhci.h>
> > +
> > +void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int
> width)
> > +{
> > + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> > + unsigned int gpio;
> > +
> > + /* Set all the necessary GPK0[0:1] pins to special-function 2 */
> > + for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) {
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> > + }
> > +
> > + switch (width) {
> > + case 8:
> > + for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6);
gpio++)
> {
> > + /* Data pin GPK1[3:6] to special-funtion 3 */
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> > +
> > + /* Setup Drive Strength */
> > + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> > + }
> > + case 4:
> > + for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6);
gpio++)
> {
> > + /* Data pin GPK0[3:6] to special-funtion 2 */
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> > +
> > + /* Setup Drive Strength */
> > + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> > + }
> > + default:
> > + break;
> > + }
> > +
> > + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> > + s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP);
> > + }
> > +}
> > +
> > +void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int
> width)
> > +{
> > + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> > + unsigned int gpio;
> > +
> > + /* Set all the necessary GPK1[0:1] pins to special-function 2 */
> > + for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) {
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> > + }
> > +
> > + for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
> > + /* Data pin GPK1[3:6] to special-function 2 */
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> > +
> > + /* Setup Drive Strength */
> > + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> > + }
> > +
> > + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> > + s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP);
> > + }
> > +}
> > +
> > +void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int
> width)
> > +{
> > + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> > + unsigned int gpio;
> > +
> > + /* Set all the necessary GPK2[0:1] pins to special-function 2 */
> > + for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) {
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
>
> Lack of "s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4)" here causes
> problems with
> Universal C210 and external SD-card. IMHO driver strength should be set
> for all MMC
> pins, not only for data pins like below (and do this for all MMC blocks of
> course).
Okay, if a problem can be occurred owing to the lack of driver strength,
we'd better set all MMC with driver strength. I will re-make it and thanks
for your comment.
Best Regards
Jeongbae Seo
> > + }
> > +
> > + switch (width) {
> > + case 8:
> > + for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6);
gpio++)
> {
> > + /* Data pin GPK3[3:6] to special-function 3 */
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> > +
> > + /* Setup Drive Strength */
> > + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> > + }
> > + case 4:
> > + for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6);
gpio++)
> {
> > + /* Data pin GPK2[3:6] to special-function 2 */
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> > +
> > + /* Setup Drive Strength */
> > + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> > + }
> > + default:
> > + break;
> > + }
> > +
> > + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> > + s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP);
> > + }
> > +}
> > +
> > +void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int
> width)
> > +{
> > + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> > + unsigned int gpio;
> > +
> > + /* Set all the necessary GPK3[0:1] pins to special-function 2 */
> > + for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) {
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> > + }
> > +
> > + for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
> > + /* Data pin GPK3[3:6] to special-function 2 */
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> > +
> > + /* Setup Drive Strength */
> > + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> > + }
> > +
> > + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> > + s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2));
> > + s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP);
> > + }
> > +}
>
> <snip>
>
> Best regards
> --
> Marek Szyprowski
> Samsung Poland R&D Center
More information about the linux-arm-kernel
mailing list