[PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration
Marek Szyprowski
m.szyprowski at samsung.com
Mon Oct 4 07:03:44 EDT 2010
Hello,
On Thursday, September 16, 2010 10:37 AM Jeongbae Seo wrote:
> From: Hyuk Lee <hyuk1.lee at samsung.com>
>
> This patch adds to support HSMMC for S5PV310 and S5PC210 and setup for
> HSMMC host controller and also related GPIO.
> At most 4 channel can be used at the same time.
> A user can configure SDHCI data bus as 8bit or 4bit.
>
> Signed-off-by: Hyuk Lee <hyuk1.lee at samsung.com>
> Signed-off-by: Jeongbae Seo <jeongbae.seo at samsung.com>
> ---
> arch/arm/mach-s5pv310/Kconfig | 39 ++++++++
> arch/arm/mach-s5pv310/Makefile | 2 +
> arch/arm/mach-s5pv310/setup-sdhci-gpio.c | 156 ++++++++++++++++++++++++++++++
> arch/arm/mach-s5pv310/setup-sdhci.c | 69 +++++++++++++
> 4 files changed, 266 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> create mode 100644 arch/arm/mach-s5pv310/setup-sdhci.c
>
<snip>
> diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> new file mode 100644
> index 0000000..8db8c81
> --- /dev/null
> +++ b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> @@ -0,0 +1,156 @@
> +/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> + *
> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/gpio.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/card.h>
> +
> +#include <plat/gpio-cfg.h>
> +#include <plat/regs-sdhci.h>
> +#include <plat/sdhci.h>
> +
> +void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
> +{
> + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> + unsigned int gpio;
> +
> + /* Set all the necessary GPK0[0:1] pins to special-function 2 */
> + for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) {
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> + }
> +
> + switch (width) {
> + case 8:
> + for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
> + /* Data pin GPK1[3:6] to special-funtion 3 */
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> + /* Setup Drive Strength */
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> + }
> + case 4:
> + for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) {
> + /* Data pin GPK0[3:6] to special-funtion 2 */
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> + /* Setup Drive Strength */
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> + }
> + default:
> + break;
> + }
> +
> + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> + s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP);
> + }
> +}
> +
> +void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
> +{
> + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> + unsigned int gpio;
> +
> + /* Set all the necessary GPK1[0:1] pins to special-function 2 */
> + for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) {
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> + }
> +
> + for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
> + /* Data pin GPK1[3:6] to special-function 2 */
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> + /* Setup Drive Strength */
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> + }
> +
> + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> + s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP);
> + }
> +}
> +
> +void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
> +{
> + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> + unsigned int gpio;
> +
> + /* Set all the necessary GPK2[0:1] pins to special-function 2 */
> + for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) {
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
Lack of "s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4)" here causes problems with
Universal C210 and external SD-card. IMHO driver strength should be set for all MMC
pins, not only for data pins like below (and do this for all MMC blocks of course).
> + }
> +
> + switch (width) {
> + case 8:
> + for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
> + /* Data pin GPK3[3:6] to special-function 3 */
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> + /* Setup Drive Strength */
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> + }
> + case 4:
> + for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) {
> + /* Data pin GPK2[3:6] to special-function 2 */
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> + /* Setup Drive Strength */
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> + }
> + default:
> + break;
> + }
> +
> + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> + s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP);
> + }
> +}
> +
> +void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
> +{
> + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> + unsigned int gpio;
> +
> + /* Set all the necessary GPK3[0:1] pins to special-function 2 */
> + for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) {
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> + }
> +
> + for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
> + /* Data pin GPK3[3:6] to special-function 2 */
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> + /* Setup Drive Strength */
> + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> + }
> +
> + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> + s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP);
> + }
> +}
<snip>
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
More information about the linux-arm-kernel
mailing list