No subject

configuration bahaves. It looks like a uart tx loopback in the iomuxer.
Is this correct?

Sascha

On Wed, Feb 09, 2011 at 10:54:01AM +0100, julien.boibessot at free.fr wrote:
> From: Julien Boibessot <julien.boibessot at armadeus.com>
>
> 
> Signed-off-by: Julien Boibessot <julien.boibessot at armadeus.com>
> ---
>  arch/arm/plat-mxc/include/mach/iomux-mx51.h |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> index b6767f9..df531aa 100644
> --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
> @@ -473,7 +473,7 @@
>  #define _MX51_PAD_UART2_RXD__UART2_RXD		IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0)
>  #define _MX51_PAD_UART2_TXD__FIRI_RXD		IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0)
>  #define _MX51_PAD_UART2_TXD__GPIO1_21		IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0)
> -#define _MX51_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(0x62c, 0x23c, 0, 0x09ec, 3, 0)
> +#define _MX51_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(0x62c, 0x23c, 0, 0x0000, 0, 0)
>  #define _MX51_PAD_UART3_RXD__CSI1_D0		IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0)
>  #define _MX51_PAD_UART3_RXD__GPIO1_22		IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0)
>  #define _MX51_PAD_UART3_RXD__UART1_DTR		IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0)
> -- 
> 1.6.0.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |