[PATCH] arm/nuc900: disable hardware cursor setting

[Wan ZongShun]

Hi Russell,

Currently, the nuc900 lcd driver did not implement controlling
hardware cursor function, so enabling it which results in penal upper left 64x64 
part has been shown in black, so I disable it.

Signed-off-by: Wan ZongShun <mcuos.com at gmail.com>
---
  arch/arm/mach-w90x900/dev.c |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 5b0c38a..e1d262c 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -438,7 +438,7 @@ static struct nuc900fb_display nuc900_lcd_info[] = {
  		.upper_margin	= 18,
  		.lower_margin	= 4,
  		.vsync_len	= 1,
-		.dccs		= 0x8e00041a,
+		.dccs		= 0x0e00041a,
  		.devctl		= 0x060800c0,
  		.fbctrl		= 0x00a000a0,
  		.scale		= 0x04000400,
-- 
1.6.3.3