[PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1

kishore kadiyala kishorek.kadiyala at gmail.com
Fri Oct 1 02:59:48 EDT 2010


Ping !!

On Wed, Sep 29, 2010 at 4:11 PM, kishore kadiyala
<kishorek.kadiyala at gmail.com> wrote:
> Gentle Reminder !
>
> Regards,
> Kishore
>
> On Tue, Sep 28, 2010 at 12:22 PM, kishore kadiyala
> <kishorek.kadiyala at gmail.com> wrote:
>> Hi Samuel,
>>
>> Could you please review this patch which touches mfd/twl6030-irq.c for
>> card detect support
>> of MMC1 controller on OMAP4.
>>
>> Regards,
>> Kishore
>>
>> On Mon, Sep 27, 2010 at 1:25 PM, kishore kadiyala
>> <kishorek.kadiyala at gmail.com> wrote:
>>> Cc: Samuel Ortiz <sameo at linux.intel.com>
>>>
>>> On Fri, Sep 24, 2010 at 10:43 PM, kishore kadiyala
>>> <kishore.kadiyala at ti.com> wrote:
>>>> Adding card detect callback function and card detect configuration
>>>> function for MMC1 Controller on OMAP4.
>>>>
>>>> Card detect configuration function does initial configuration of the
>>>> MMC Control & PullUp-PullDown registers of Phoenix.
>>>>
>>>> For MMC1 Controller, card detect interrupt source is
>>>> twl6030 which is non-gpio. The card detect call back function provides
>>>> card present/absent status by reading MMC Control register present
>>>> on twl6030.
>>>>
>>>> Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
>>>> the suspend/resume initialization which was done in omap_hsmmc_gpio_init
>>>> previously is moved to the probe thus making it generic for both OMAP3 & OMAP4.
>>>>
>>>> Cc: Tony Lindgren <tony at atomide.com>
>>>> Cc: Andrew Morton <akpm at linux-foundation.org>
>>>> Cc: Madhusudhan Chikkature <madhu.cr at ti.com>
>>>> Cc: Adrian Hunter <adrian.hunter at nokia.com>
>>>> Signed-off-by: Kishore Kadiyala <kishore.kadiyala at ti.com>
>>>> ---
>>>>  arch/arm/mach-omap2/board-4430sdp.c |    7 +++-
>>>>  drivers/mfd/twl6030-irq.c           |   73 +++++++++++++++++++++++++++++++++++
>>>>  drivers/mmc/host/omap_hsmmc.c       |    4 +-
>>>>  include/linux/i2c/twl.h             |   31 +++++++++++++++
>>>>  4 files changed, 112 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
>>>> index 9447644..a49f285 100644
>>>> --- a/arch/arm/mach-omap2/board-4430sdp.c
>>>> +++ b/arch/arm/mach-omap2/board-4430sdp.c
>>>> @@ -227,9 +227,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
>>>>        struct omap_mmc_platform_data *pdata = dev->platform_data;
>>>>
>>>>        /* Setting MMC1 Card detect Irq */
>>>> -       if (pdev->id == 0)
>>>> +       if (pdev->id == 0) {
>>>> +               ret = twl6030_mmc_card_detect_config();
>>>> +               if (ret)
>>>> +                       pr_err("Failed configuring MMC1 card detect\n");
>>>>                pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
>>>>                                                MMCDETECT_INTR_OFFSET;
>>>> +               pdata->slots[0].card_detect = twl6030_mmc_card_detect;
>>>> +       }
>>>>        return ret;
>>>>  }
>>>>
>>>> diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
>>>> index 10bf228..2d3bb82 100644
>>>> --- a/drivers/mfd/twl6030-irq.c
>>>> +++ b/drivers/mfd/twl6030-irq.c
>>>> @@ -36,6 +36,7 @@
>>>>  #include <linux/irq.h>
>>>>  #include <linux/kthread.h>
>>>>  #include <linux/i2c/twl.h>
>>>> +#include <linux/platform_device.h>
>>>>
>>>>  /*
>>>>  * TWL6030 (unlike its predecessors, which had two level interrupt handling)
>>>> @@ -223,6 +224,78 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
>>>>  }
>>>>  EXPORT_SYMBOL(twl6030_interrupt_mask);
>>>>
>>>> +int twl6030_mmc_card_detect_config(void)
>>>> +{
>>>> +       int ret;
>>>> +       u8 reg_val = 0;
>>>> +
>>>> +       /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
>>>> +       twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
>>>> +                                               REG_INT_MSK_LINE_B);
>>>> +       twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
>>>> +                                               REG_INT_MSK_STS_B);
>>>> +       /*
>>>> +        * Intially Configuring MMC_CTRL for receving interrupts &
>>>> +        * Card status on TWL6030 for MMC1
>>>> +        */
>>>> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
>>>> +       if (ret < 0) {
>>>> +               pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
>>>> +               return ret;
>>>> +       }
>>>> +       reg_val &= ~VMMC_AUTO_OFF;
>>>> +       reg_val |= SW_FC;
>>>> +       ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
>>>> +       if (ret < 0) {
>>>> +               pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
>>>> +               return ret;
>>>> +       }
>>>> +
>>>> +       /* Configuring PullUp-PullDown register */
>>>> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
>>>> +                                               TWL6030_CFG_INPUT_PUPD3);
>>>> +       if (ret < 0) {
>>>> +               pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
>>>> +                                                                       ret);
>>>> +               return ret;
>>>> +       }
>>>> +       reg_val &= ~(MMC_PU | MMC_PD);
>>>> +       ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
>>>> +                                               TWL6030_CFG_INPUT_PUPD3);
>>>> +       if (ret < 0) {
>>>> +               pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
>>>> +                                                                       ret);
>>>> +               return ret;
>>>> +       }
>>>> +       return 0;
>>>> +}
>>>> +EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
>>>> +
>>>> +int twl6030_mmc_card_detect(struct device *dev, int slot)
>>>> +{
>>>> +       int ret = -EIO;
>>>> +       u8 read_reg = 0;
>>>> +       struct platform_device *pdev = to_platform_device(dev);
>>>> +
>>>> +       if (pdev->id) {
>>>> +               /* TWL6030 provide's Card detect support for
>>>> +                * only MMC1 controller.
>>>> +                */
>>>> +               pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__);
>>>> +               return ret;
>>>> +       }
>>>> +       /*
>>>> +        * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
>>>> +        * 0 - Card not present ,1 - Card present
>>>> +        */
>>>> +       ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
>>>> +                                               TWL6030_MMCCTRL);
>>>> +       if (ret >= 0)
>>>> +               ret = read_reg & STS_MMC;
>>>> +       return ret;
>>>> +}
>>>> +EXPORT_SYMBOL(twl6030_mmc_card_detect);
>>>> +
>>>>  int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
>>>>  {
>>>>
>>>> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
>>>> index 562dbbb..a51894d 100644
>>>> --- a/drivers/mmc/host/omap_hsmmc.c
>>>> +++ b/drivers/mmc/host/omap_hsmmc.c
>>>> @@ -466,8 +466,6 @@ static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
>>>>        int ret;
>>>>
>>>>        if (gpio_is_valid(pdata->slots[0].switch_pin)) {
>>>> -               pdata->suspend = omap_hsmmc_suspend_cdirq;
>>>> -               pdata->resume = omap_hsmmc_resume_cdirq;
>>>>                if (pdata->slots[0].cover)
>>>>                        pdata->slots[0].get_cover_state =
>>>>                                        omap_hsmmc_get_cover_state;
>>>> @@ -2211,6 +2209,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
>>>>                                "Unable to grab MMC CD IRQ\n");
>>>>                        goto err_irq_cd;
>>>>                }
>>>> +               pdata->suspend = omap_hsmmc_suspend_cdirq;
>>>> +               pdata->resume = omap_hsmmc_resume_cdirq;
>>>>        }
>>>>
>>>>        omap_hsmmc_disable_irq(host);
>>>> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
>>>> index 6de90bf..e64894c 100644
>>>> --- a/include/linux/i2c/twl.h
>>>> +++ b/include/linux/i2c/twl.h
>>>> @@ -141,6 +141,16 @@
>>>>  #define TWL6030_CHARGER_CTRL_INT_MASK  0x10
>>>>  #define TWL6030_CHARGER_FAULT_INT_MASK         0x60
>>>>
>>>> +#define TWL6030_MMCCTRL                0xEE
>>>> +#define VMMC_AUTO_OFF                  (0x1 << 3)
>>>> +#define SW_FC                          (0x1 << 2)
>>>> +#define STS_MMC                        0x1
>>>> +
>>>> +#define TWL6030_CFG_INPUT_PUPD3        0xF2
>>>> +#define MMC_PU                         (0x1 << 3)
>>>> +#define MMC_PD                         (0x1 << 2)
>>>> +
>>>> +
>>>>
>>>>  #define TWL4030_CLASS_ID               0x4030
>>>>  #define TWL6030_CLASS_ID               0x6030
>>>> @@ -173,6 +183,27 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
>>>>  int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
>>>>  int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
>>>>
>>>> +/* Card detect Configuration for MMC1 Controller on OMAP4 */
>>>> +#ifdef CONFIG_TWL4030_CORE
>>>> +int twl6030_mmc_card_detect_config(void);
>>>> +#else
>>>> +static inline int twl6030_mmc_card_detect_config(void)
>>>> +{
>>>> +       pr_debug("twl6030_mmc_card_detect_config not supported\n");
>>>> +       return 0;
>>>> +}
>>>> +#endif
>>>> +
>>>> +/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
>>>> +#ifdef CONFIG_TWL4030_CORE
>>>> +int twl6030_mmc_card_detect(struct device *dev, int slot);
>>>> +#else
>>>> +static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
>>>> +{
>>>> +       pr_debug("Call back twl6030_mmc_card_detect not supported\n");
>>>> +       return -EIO;
>>>> +}
>>>> +#endif
>>>>  /*----------------------------------------------------------------------*/
>>>>
>>>>  /*
>>>> --
>>>> 1.7.0.4
>>>>
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>>> the body of a message to majordomo at vger.kernel.org
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>
>



More information about the linux-arm-kernel mailing list