[PATCH v2] ARM: S3C64XX: add support for mach-mini6410

Darius Augulis augulis.darius at gmail.com
Tue Oct 19 13:19:55 EDT 2010


Kukjin,

please replace old patch in my previously sent series with this new one.
Other I think should be OK. Could you please add this series to your 
tree? I'm afraid it's too late to have it in 2.3.37 even thought I sent 
them early enough.

Thanks,
Darius


On 10/19/2010 08:11 PM, Darius Augulis wrote:
> Add support for mini6410 board from FriendlyARM
>
> Signed-off-by: Darius Augulis<augulis.darius at gmail.com>
> ---
>
> Changelog since v1:
>   - Removed .phys_io and .io_pg_offst from MACHINE_START
>
>   arch/arm/mach-s3c64xx/Kconfig         |   10 ++
>   arch/arm/mach-s3c64xx/Makefile        |    1
>   arch/arm/mach-s3c64xx/mach-mini6410.c |  154 +++++++++++++++++++++++++++++++++
>   3 files changed, 165 insertions(+), 0 deletions(-)
>   create mode 100644 arch/arm/mach-s3c64xx/mach-mini6410.c
>
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index c05ae12..bbeb4ca 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -98,6 +98,16 @@ config MACH_ANW6410
>   	help
>   	  Machine support for the A&W6410
>
> +config MACH_MINI6410
> +	bool "MINI6410"
> +	select CPU_S3C6410
> +	select S3C_DEV_HSMMC
> +	select S3C_DEV_HSMMC1
> +	select S3C64XX_SETUP_SDHCI
> +	select S3C_DEV_USB_HOST
> +	help
> +	  Machine support for the FriendlyARM MINI6410
> +
>   config MACH_REAL6410
>   	bool "REAL6410"
>   	select CPU_S3C6410
> diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
> index 90221a2..4657363 100644
> --- a/arch/arm/mach-s3c64xx/Makefile
> +++ b/arch/arm/mach-s3c64xx/Makefile
> @@ -53,6 +53,7 @@ obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
>   obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
>   obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
>   obj-$(CONFIG_MACH_REAL6410)     += mach-real6410.o
> +obj-$(CONFIG_MACH_MINI6410)     += mach-mini6410.o
>   obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
>   obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
>   obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
> new file mode 100644
> index 0000000..3970125
> --- /dev/null
> +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
> @@ -0,0 +1,154 @@
> +/* linux/arch/arm/mach-s3c64xx/mach-mini6410.c
> + *
> + * Copyright 2010 Darius Augulis<augulis.darius at gmail.com>
> + * Copyright 2008 Openmoko, Inc.
> + * Copyright 2008 Simtec Electronics
> + *	Ben Dooks<ben at simtec.co.uk>
> + *	http://armlinux.simtec.co.uk/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> +*/
> +
> +#include<linux/init.h>
> +#include<linux/interrupt.h>
> +#include<linux/gpio.h>
> +#include<linux/kernel.h>
> +#include<linux/list.h>
> +#include<linux/dm9000.h>
> +#include<linux/serial_core.h>
> +#include<linux/types.h>
> +
> +#include<asm/mach-types.h>
> +#include<asm/mach/arch.h>
> +#include<asm/mach/map.h>
> +
> +#include<mach/map.h>
> +#include<mach/regs-gpio.h>
> +#include<mach/regs-srom.h>
> +#include<mach/s3c6410.h>
> +
> +#include<plat/cpu.h>
> +#include<plat/devs.h>
> +#include<plat/regs-serial.h>
> +
> +#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
> +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
> +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
> +
> +static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
> +	[0] = {
> +		.hwport	= 0,
> +		.flags	= 0,
> +		.ucon	= UCON,
> +		.ulcon	= ULCON,
> +		.ufcon	= UFCON,
> +	},
> +	[1] = {
> +		.hwport	= 1,
> +		.flags	= 0,
> +		.ucon	= UCON,
> +		.ulcon	= ULCON,
> +		.ufcon	= UFCON,
> +	},
> +	[2] = {
> +		.hwport	= 2,
> +		.flags	= 0,
> +		.ucon	= UCON,
> +		.ulcon	= ULCON,
> +		.ufcon	= UFCON,
> +	},
> +	[3] = {
> +		.hwport	= 3,
> +		.flags	= 0,
> +		.ucon	= UCON,
> +		.ulcon	= ULCON,
> +		.ufcon	= UFCON,
> +	},
> +};
> +
> +/* DM9000AEP 10/100 ethernet controller */
> +
> +static struct resource mini6410_dm9k_resource[] = {
> +	[0] = {
> +		.start	= S3C64XX_PA_XM0CSN1,
> +		.end	= S3C64XX_PA_XM0CSN1 + 1,
> +		.flags	= IORESOURCE_MEM
> +	},
> +	[1] = {
> +		.start	= S3C64XX_PA_XM0CSN1 + 4,
> +		.end	= S3C64XX_PA_XM0CSN1 + 5,
> +		.flags	= IORESOURCE_MEM
> +	},
> +	[2] = {
> +		.start	= S3C_EINT(7),
> +		.end	= S3C_EINT(7),
> +		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
> +	}
> +};
> +
> +static struct dm9000_plat_data mini6410_dm9k_pdata = {
> +	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
> +};
> +
> +static struct platform_device mini6410_device_eth = {
> +	.name		= "dm9000",
> +	.id		= -1,
> +	.num_resources	= ARRAY_SIZE(mini6410_dm9k_resource),
> +	.resource	= mini6410_dm9k_resource,
> +	.dev		= {
> +		.platform_data	=&mini6410_dm9k_pdata,
> +	},
> +};
> +
> +static struct platform_device *mini6410_devices[] __initdata = {
> +	&mini6410_device_eth,
> +	&s3c_device_hsmmc0,
> +	&s3c_device_hsmmc1,
> +	&s3c_device_ohci,
> +};
> +
> +static void __init mini6410_map_io(void)
> +{
> +	s3c64xx_init_io(NULL, 0);
> +	s3c24xx_init_clocks(12000000);
> +	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
> +}
> +
> +static void __init mini6410_machine_init(void)
> +{
> +	u32 cs1;
> +
> +	/* configure nCS1 width to 16 bits */
> +
> +	cs1 = __raw_readl(S3C64XX_SROM_BW)&
> +		~(S3C64XX_SROM_BW__CS_MASK<<  S3C64XX_SROM_BW__NCS1__SHIFT);
> +	cs1 |= ((1<<  S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
> +		(1<<  S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
> +		(1<<  S3C64XX_SROM_BW__BYTEENABLE__SHIFT))<<
> +			S3C64XX_SROM_BW__NCS1__SHIFT;
> +	__raw_writel(cs1, S3C64XX_SROM_BW);
> +
> +	/* set timing for nCS1 suitable for ethernet chip */
> +
> +	__raw_writel((0<<  S3C64XX_SROM_BCX__PMC__SHIFT) |
> +		(6<<  S3C64XX_SROM_BCX__TACP__SHIFT) |
> +		(4<<  S3C64XX_SROM_BCX__TCAH__SHIFT) |
> +		(1<<  S3C64XX_SROM_BCX__TCOH__SHIFT) |
> +		(13<<  S3C64XX_SROM_BCX__TACC__SHIFT) |
> +		(4<<  S3C64XX_SROM_BCX__TCOS__SHIFT) |
> +		(0<<  S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
> +
> +	platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
> +}
> +
> +MACHINE_START(MINI6410, "MINI6410")
> +	/* Maintainer: Darius Augulis<augulis.darius at gmail.com>  */
> +	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
> +	.init_irq	= s3c6410_init_irq,
> +	.map_io		= mini6410_map_io,
> +	.init_machine	= mini6410_machine_init,
> +	.timer		=&s3c24xx_timer,
> +MACHINE_END




More information about the linux-arm-kernel mailing list