September 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Sep 1 01:10:48 EDT 2011
Ending: Fri Sep 30 22:32:58 EDT 2011
Messages: 4099

• [PATCH] arm: gic: fix gic_set_affinity   Ming Lei
• [PATCH] mmc: core: eMMC4.5 Add the timeout for switch   Girish K S
• [PATCH 1/1] mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms   Tony Lin
• [PATCH 1/1] mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms   Wolfram Sang
• [PATCHv2 2/3] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Barry Song
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Barry Song
• [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Lee Jones
• [PATCH 01/10] ARM: kprobes: Add config option for selecting the ARM kprobes tests   Tixy
• [PATCH 1/1] mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms   Lin Tony-B19295
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Jamie Iles
• [PATCH 0/3] RFC: addition to DMA API   Will Deacon
• [PATCH 1/4 v5] drivers: create a pin control subsystem v5   Linus Walleij
• [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v2 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v2 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH v2 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH v2 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v2 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v2 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH 0/3] RFC: addition to DMA API   Will Deacon
• [PATCH 1/4 v5] drivers: create a pin control subsystem v5   Linus Walleij
• [PATCH 0/3] RFC: addition to DMA API   Ming Lei
• [PATCH 0/4] pin controller subsystem v6   Linus Walleij
• [PATCH 1/4 v6] drivers: create a pin control subsystem v6   Linus Walleij
• [PATCH 2/4 v6] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 3/4 v6] amba: request muxing for PrimeCell devices   Linus Walleij
• [PATCH 4/4 v6] mach-u300: activate pinmux driver, delete old padmux driver   Linus Walleij
• [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Roedel, Joerg
• [PATCH] mach-ux500: unlock I&D l2x0 caches before init   Linus Walleij
• [PATCH 09/24] C6X: signal management   Matt Fleming
• [PATCH 1/3] add dma_coherent_write_sync to DMA API   Michał Mirosław
• [PATCH V2 0/6] spi/spi-pl022 fixes   Viresh Kumar
• [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
• Kernel panic in 2.6.35.12 kernel   Russell King - ARM Linux
• [PATCH] ARM: vfp: Fix the comment to make it consistent with the code.   Russell King - ARM Linux
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Marc Zyngier
• [PATCH V2 0/6] spi/spi-pl022 fixes   Linus Walleij
• [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux   Linus Walleij
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Marc Dietich
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Tomasz Figa
• [PATCH v3 10/13] of: add a generic pinmux helper   Linus Walleij
• [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux   Barry Song
• [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Ohad Ben-Cohen
• [PATCH 1/7] OMAP: PM: omap_device: add omap_hwmod_name_get_odev   Cousson, Benoit
• [PATCH 2/7] OMAP: PM: omap_device: add few quick access functions   Cousson, Benoit
• [PATCH] arm: mach-davinci: use kzalloc()   Nori, Sekhar
• [PATCH v4] ARM: davinci: AM18x: Add wl1271/wlan support   Nori, Sekhar
• [PATCH 7/7] OMAP2+: devices: Remove all omap_device_pm_latency structures   Cousson, Benoit
• [PATCH v2 4/6] DMA: PL330: Add device tree support   Rob Herring
• [PATCH v2 7/7] ARM: highbank: add suspend support   Shawn Guo
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH 2/5] Add documentation for new sysfs devices/soc functionality   Lee Jones
• [PATCH 3/5] mach-ux500: export System-on-Chip information ux500 via sysfs   Lee Jones
• [PATCH 4/5] mach-ux500: move top level platform devices in sysfs to /sys/devices/soc/X   Lee Jones
• [PATCH 5/5] mach-ux500: add a SoC ID (serial) callback for the u8500   Lee Jones
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Mark Brown
• [PATCH 1/3] add dma_coherent_write_sync to DMA API   Mark Salter
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Russell King - ARM Linux
• [PATCH 01/11] ARM: pm: CPU specific code should not overwrite r1 (v:p offset)   Russell King - ARM Linux
• [PATCH 02/11] ARM: pm: arm920/926: fix number of registers saved   Russell King - ARM Linux
• [PATCH 03/11] ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness   Russell King - ARM Linux
• [PATCH 04/11] ARM: pm: avoid writing the auxillary control register for ARMv7   Russell King - ARM Linux
• [PATCH 05/11] ARM: pm: force non-zero return value from __cpu_suspend when aborting   Russell King - ARM Linux
• [PATCH 06/11] ARM: pm: preallocate a page table for suspend/resume   Russell King - ARM Linux
• [PATCH 07/11] ARM: pm: only use preallocated page table during resume   Russell King - ARM Linux
• [PATCH 08/11] ARM: pm: no need to save/restore context ID register   Russell King - ARM Linux
• [PATCH 09/11] ARM: pm: get rid of cpu_resume_turn_mmu_on   Russell King - ARM Linux
• [PATCH 10/11] ARM: pm: convert some assembly to C   Russell King - ARM Linux
• [PATCH 11/11] ARM: pm: add L2 cache cleaning for suspend   Russell King - ARM Linux
• [PATCH RESEND] video: nuc900fb: remove include of mach/clkdev.h   Florian Tobias Schandinat
• [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Laurent Pinchart
• try_to_freeze() called with IRQs disabled on ARM   Ulrich Weigand
• [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Roedel, Joerg
• [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Laurent Pinchart
• try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
• [PATCH v2 0/7] Initial Calxeda Highbank support   Jamie Iles
• [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Ohad Ben-Cohen
• [PATCH] iommu: omap_iovmm: support non page-aligned buffers in iommu_vmap   Laurent Pinchart
• [PATCH] mach-ux500: unlock I&D l2x0 caches before init   Rob Herring
• [PATCH 3/4] mach-ux500: export System-on-Chip information ux500 via sysfs   Greg KH
• [PATCH] [ARM] davinci: gpio: eliminate unused variable warnings   Nori, Sekhar
• Remove from mailing list   Robert Kariniemi
• [RFC PATCH 5/5] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Arnd Bergmann
• [PATCH 2/7] OMAP: PM: omap_device: add few quick access functions   Kevin Hilman
• [PATCH 0/3] RFC: addition to DMA API   Alan Stern
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Shawn Guo
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Russell King - ARM Linux
• [PATCH 0/3] RFC: addition to DMA API   Alan Stern
• [PATCH 0/3] RFC: addition to DMA API   Ming Lei
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Shawn Guo
• [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume   Arnd Bergmann
• [PATCH] gpio: exynos4: Add device tree support   Thomas Abraham
• [PATCH 0/3] RFC: addition to DMA API   Russell King - ARM Linux
• [PATCH] ARM: mach-davinci: Select PHYLIB for ARCH_DAVINCI_DM644x   Nori, Sekhar
• [PATCH 0/7] OMAP: omap_device cleanup before device-tree integration   Kevin Hilman
• [PATCH 0/2] video: s3c-fb: Add window positioning support   Florian Tobias Schandinat
• [PATCH 0/3] RFC: addition to DMA API   Alan Stern
• [PATCH 00/13] OMAP4: Add DT support for i2c and twl6030   Benoit Cousson
• [PATCH 01/13] irq: Add stub for none DT build in irqdomain.h   Benoit Cousson
• [PATCH 02/13] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH 03/13] documentation/dt: Add OMAP i2c bindings documentation   Benoit Cousson
• [PATCH 04/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Benoit Cousson
• [PATCH 05/13] documentation/dt: Add TWL4030 and TWL6030 bindings   Benoit Cousson
• [PATCH 06/13] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH 07/13] arm/dts: omap4-sdp: Set clock freq for i2c controllers   Benoit Cousson
• [PATCH 08/13] arm/dts: omap4-panda: Set clock freq for i2c controllers   Benoit Cousson
• [PATCH 09/13] arm/dts: omap4-sdp: Add twl6030 node   Benoit Cousson
• [PATCH 10/13] arm/dts: omap4-panda: Add twl6030 node   Benoit Cousson
• [PATCH 11/13] OMAP4: board-dt: Remove static i2c init   Benoit Cousson
• [PATCH 12/13] arm/dts: omap4-sdp: Add i2c3 & i2c4 devices   Benoit Cousson
• [PATCH 13/13] arm/dts: omap4-panda: Add EEPROM entry in i2c3   Benoit Cousson
• [PATCH 0/7] OMAP3: Add basic DT support + i2c + twl   Benoit Cousson
• [PATCH 1/7] arm/dts: Add initial device-tree support for OMAP3 SoC   Benoit Cousson
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Benoit Cousson
• [PATCH 3/7] arm/dts: OMAP3: Add i2c controllers nodes   Benoit Cousson
• [PATCH 4/7] arm/dts: omap3-beagle: Include the generic omap3.dtsi   Benoit Cousson
• [PATCH 5/7] arm/dts: omap3-beagle: Add twl4030 and EEPROM i2c devices   Benoit Cousson
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Benoit Cousson
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Benoit Cousson
• [PATCH 0/3] RFC: addition to DMA API   Will Deacon
• [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller   Cousson, Benoit
• [PATCH 1/1] OMAP: omap_device: only override _noirq methods, not normal suspend/resume   Kevin Hilman
• [PATCH 0/3] RFC: addition to DMA API   Russell King - ARM Linux
• [PATCH] OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers   Kevin Hilman
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Arnd Bergmann
• [PATCH] OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers   Arnd Bergmann
• [PATCH 04/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Arnd Bergmann
• [RFC PATCH 1/3] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Kevin Hilman
• [RFC PATCH 2/3] OMAP: omap_device: Add a DT parser for multiple strings   Kevin Hilman
• [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Timur Tabi
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Stephen Warren
• [PATCH 00/13] OMAP4: Add DT support for i2c and twl6030   Arnd Bergmann
• [PATCH 0/3] RFC: addition to DMA API   Mark Salter
• [PATCH 09/24] C6X: signal management   Mark Salter
• [PATCH] mmc: omap_hsmmc: DMA unmap only once in case of MMC error   S, Venkatraman
• [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Lars-Peter Clausen
• [PATCH 1/4 v5] drivers: create a pin control subsystem v5   Stephen Warren
• [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Timur Tabi
• [PATCH 1/7] OMAP: PM: omap_device: add omap_hwmod_name_get_odev   Menon, Nishanth
• [GIT PULL] Perf, PMU and hw_breakpoint updates for 3.2   Will Deacon
• [GIT PULL] CPU mapping platform updates for 3.2   Will Deacon
• [PATCH 1/4 v6] drivers: create a pin control subsystem v6   Stephen Warren
• [PATCH 2/4 v6] pinmux: add a driver for the U300 pinmux   Stephen Warren
• [PATCH v2 7/7] ARM: highbank: add suspend support   Rob Herring
• [PATCH] mach-ux500: unlock I&D l2x0 caches before init   Linus Walleij
• [PATCH] OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers   Rafael J. Wysocki
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Greg KH
• [PATCH] ARM: mach-davinci: Select PHYLIB for ARCH_DAVINCI_DM644x   Axel Lin
• [RFC PATCH 3/3] OMAP: omap_device: Add a method to build an omap_device from a DT node   Kevin Hilman
• [GIT PULL v2] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc   Paul Walmsley
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Boojin Kim
• [PATCH v8 01/16] DMA: PL330: Add support runtime PM for PL330 DMAC   Boojin Kim
• [PATCH v8 02/16] DMA: PL330: Update PL330 DMA API driver   Boojin Kim
• [PATCH v8 03/16] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• [PATCH v8 04/16] DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command   Boojin Kim
• [PATCH v8 05/16] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
• [PATCH v8 06/16] ARM: SAMSUNG: Update to use PL330-DMA driver   Boojin Kim
• [PATCH v8 07/16] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH v8 08/16] ARM: EXYNOS4: Use generic DMA PL330 driver   Boojin Kim
• [PATCH v8 09/16] ARM: S5PV210: Use generic DMA PL330 driver   Boojin Kim
• [PATCH v8 10/16] ARM: S5PC100: Use generic DMA PL330 driver   Boojin Kim
• [PATCH v8 11/16] ARM: S5P64X0: Use generic DMA PL330 driver   Boojin Kim
• [PATCH v8 12/16] ARM: SAMSUNG: Remove S3C-PL330-DMA driver   Boojin Kim
• [PATCH v8 13/16] spi/s3c64xx: Add support DMA engine API   Boojin Kim
• [PATCH v8 14/16] spi/s3c64xx: Merge dma control code   Boojin Kim
• [PATCH v8 15/16] ASoC: Samsung: Update DMA interface   Boojin Kim
• [PATCH v8 16/16] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Boojin Kim
• [PATCH 0/3] RFC: addition to DMA API   Ming Lei
• [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Kyungmin Park
• [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Rob Clark
• [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Rob Clark
• [PATCH 0/4] OMAP2: clockdomain/powerdomain: remove OMAP_CHIP bitmasks   Paul Walmsley
• [PATCH 1/4] OMAP: clockdomain: split clkdm_init()   Paul Walmsley
• [PATCH 2/4] OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain   Paul Walmsley
• [PATCH 3/4] OMAP: powerdomain: split pwrdm_init() into two functions   Paul Walmsley
• [PATCH 4/4] OMAP: powerdomain: remove omap_chip bitmasks   Paul Walmsley
• [PATCH 0/6] OMAP/Davinci debug UART code cleanup   Nicolas Pitre
• [PATCH 1/6] ARM: add an extra temp register to the addruart low level debugging macro   Nicolas Pitre
• [PATCH 2/6] ARM: plat-omap: make OMAP_UART_INFO into a relative offset   Nicolas Pitre
• [PATCH 3/6] ARM: mach-omap1: clean up debug-macro.S   Nicolas Pitre
• [PATCH 4/6] ARM: mach-omap2: clean up debug-macro.S   Nicolas Pitre
• [PATCH 5/6] ARM: mach-davinci: make DAVINCI_UART_INFO into a relative offset   Nicolas Pitre
• [PATCH 6/6] ARM: mach-davinci: clean up debug-macro.S   Nicolas Pitre
• KVM ARM interrupt virtualization   carson bill
• [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller   G, Manjunath Kondaiah
• [GIT PULL] CPU mapping platform updates for 3.2   Nicolas Pitre
• [PATCH 1/4 v4] drivers: create a pin control subsystem   Stijn Devriendt
• [PATCH 1/4 v4] drivers: create a pin control subsystem   Linus Walleij
• [PATCH 1/4 v5] drivers: create a pin control subsystem v5   Linus Walleij
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Tony Lindgren
• [PATCH 2/4 v6] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Tony Lindgren
• [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Thomas Gleixner
• [GIT PULL] CPU mapping platform updates for 3.2   Will Deacon
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [RFC PATCH] genirq: set pending flag for disabled level interrupt   Thomas Gleixner
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Cousson, Benoit
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Russell King - ARM Linux
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Russell King - ARM Linux
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Jamie Iles
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Marc Zyngier
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Jamie Iles
• [PATCH 0/2] video: s3c-fb: Add window positioning support   Tomi Valkeinen
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Tony Lindgren
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Tony Lindgren
• [PATCH] at91: add Atmel ISI and ov2640 support on m10/g45 board.   Josh Wu
• [PATCH V2 00/16] omap_hsmmc patches   Tony Lindgren
• [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Phil Sutter
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Marc Dietich
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Tony Lindgren
• [RFC][PATCH v3] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Cousson, Benoit
• [RFC 0/2] Memory mapped virtio device   Pawel Moll
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   Tony Lindgren
• [PATCH 0/4] OMAP2: clockdomain/powerdomain: remove OMAP_CHIP bitmasks   Tony Lindgren
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Cousson, Benoit
• [PATCH 2/7] OMAP: PM: omap_device: add few quick access functions   Cousson, Benoit
• [PATCH v3] ARM: sched_clock: allow sched_clock to be selected at runtime   Tony Lindgren
• [PATCH] ARM: remove missing cns3xxx includes   Imre Kaloz
• [PATCH v3] ARM: sched_clock: allow sched_clock to be selected at runtime   Marc Zyngier
• [PATCH 1/4 v6] drivers: create a pin control subsystem v6   Linus Walleij
• [PATCH 7/7] OMAP3: beagleboard: Remove DT support from regular board   Tony Lindgren
• [GIT PULL] CPU mapping platform updates for 3.2   Nicolas Pitre
• [GIT PULL] CPU mapping platform updates for 3.2   Will Deacon
• [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Ben Hutchings
• [PATCH/RFC 0/8 v2] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [PATCH 1/7] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [PATCH 2/7] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [PATCH 0/3] RFC: addition to DMA API   Alan Stern
• [PATCH 3/7] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Marek Szyprowski
• [PATCH 4/7] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [PATCH 5/7] ARM: dma-mapping: remove redundant code and cleanup   Marek Szyprowski
• [PATCH 6/7] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH 7/7] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Marek Szyprowski
• [RFC 0/2 v2] ARM: DMA-mapping & IOMMU integration   Marek Szyprowski
• [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Marek Szyprowski
• [PATCH 2/2] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Marek Szyprowski
• [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Phil Sutter
• FW: [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   chetan loke
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH] ARM: S5P64X0: Fix mask value for S5P64X0 CPU IDs   Ajay Kumar
• [PATCH 5/5] mach-ux500: add a SoC ID (serial) callback for the u8500   Arnd Bergmann
• [PATCH v2 0/6] OMAP: omap_device cleanup before device-tree integration   Benoit Cousson
• [PATCH v2 1/6] OMAP: omap_device: Add omap_hwmod_name_get_dev   Benoit Cousson
• [PATCH v2 2/6] OMAP3: beagle-board: Use the omap_hwmod_name_get_dev API   Benoit Cousson
• [PATCH v2 3/6] OMAP2+: pm: Use hwmod name instead of dev pointer   Benoit Cousson
• [PATCH v2 4/6] OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PM   Benoit Cousson
• [PATCH v2 5/6] OMAP: omap_device: Create a default omap_device_pm_latency   Benoit Cousson
• [PATCH v2 6/6] OMAP2+: devices: Remove all omap_device_pm_latency structures   Benoit Cousson
• [PATCH 3/5] mach-ux500: export System-on-Chip information ux500 via sysfs   Arnd Bergmann
• [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Wolfram Sang
• try_to_freeze() called with IRQs disabled on ARM   Ulrich Weigand
• [PATCH v2 1/2] ASoC: mxs-saif: add record function   Wolfram Sang
• [PATCH v2 2/2] ASoC: mxs-sgtl5000: add record function   Wolfram Sang
• [PATCH 5/5] mach-ux500: add a SoC ID (serial) callback for the u8500   Lee Jones
• [PATCH 0/2] Move sdhci-s3c platform helper into driver   Thomas Abraham
• [PATCH 1/2] mmc: sdhci-s3c: add default controller configuration   Thomas Abraham
• [PATCH 2/2] arm: samsung: remove sdhci default configuration setup platform helper   Thomas Abraham
• [RFC PATCH 1/3] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Cousson, Benoit
• [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Stephen Warren
• FW: [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Phil Sutter
• [RFC PATCH 2/3] OMAP: omap_device: Add a DT parser for multiple strings   Cousson, Benoit
• [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Stephen Warren
• [RFC PATCH 3/3] OMAP: omap_device: Add a method to build an omap_device from a DT node   Cousson, Benoit
• [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it   Thomas Gleixner
• [PATCH 5/5] mach-ux500: add a SoC ID (serial) callback for the u8500   Arnd Bergmann
• [PATCH 2/4 v6] pinmux: add a driver for the U300 pinmux   Stephen Warren
• [RFC PATCH 1/3] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Kevin Hilman
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Greg KH
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Greg KH
• [PATCH 1/4 v6] drivers: create a pin control subsystem v6   Stephen Warren
• FW: [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   chetan loke
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Stephen Warren
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Arnd Bergmann
• try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
• [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Russell King - ARM Linux
• [PATCH/RFC 0/7] iommu: fixes & extensions   Ohad Ben-Cohen
• [PATCH 1/7] iommu/omap-iovmm: support non page-aligned buffers in iommu_vmap   Ohad Ben-Cohen
• [PATCH 2/7] iommu/omap: cleanup: remove a redundant statement   Ohad Ben-Cohen
• [PATCH 3/7] iommu/core: use the existing IS_ALIGNED macro   Ohad Ben-Cohen
• [PATCH 4/7] iommu/omap: ->unmap() should return order of unmapped page   Ohad Ben-Cohen
• [PATCH 5/7] iommu/msm: ->unmap() should return order of unmapped page   Ohad Ben-Cohen
• [RFC 6/7] iommu/core: add fault reporting   Ohad Ben-Cohen
• [RFC 7/7] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Arnd Bergmann
• try_to_freeze() called with IRQs disabled on ARM   Ulrich Weigand
• try_to_freeze() called with IRQs disabled on ARM   Russell King - ARM Linux
• [PATCH] OMAP: convert new boards to atag_offset   Kevin Hilman
• testing-board branch: rebase to RMK's devel-stable?   Kevin Hilman
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Greg KH
• [PATCH] at91: add Atmel ISI and ov2640 support on m10/g45 board.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91/usb: always provide all the clocks   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] iommu/msm: ->unmap() should return order of unmapped page   David Brown
• [PATCH] ARM: S3C64XX: Add devices for Kilchoman audio module on Cragganmore   Mark Brown
• testing-board branch: rebase to RMK's devel-stable?   Nicolas Pitre
• testing-board branch: rebase to RMK's devel-stable?   Nicolas Pitre
• [PATCH] ARM: S3C64XX: Register Lowland audio device on Cragganmore   Mark Brown
• IRQF_TRIGGER_LOW and ARM GIC   Stephen Warren
• [PATCH 00/14] McBSP cleanup and generalization   Kevin Hilman
• [PATCH] arm: exynos4: add support for dt irq specifier to linux virq conversion   Thomas Abraham
• [RFC PATCH 0/3] Yet another GIC OF binding series   Thomas Abraham
• [PATCH v2 0/5] CPU PM notifiers   Santosh Shilimkar
• [PATCH v2 1/5] cpu_pm: Add cpu power management notifiers   Santosh Shilimkar
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Santosh Shilimkar
• [PATCH v2 3/5] ARM: gic: Use cpu pm notifiers to save gic state   Santosh Shilimkar
• [PATCH v2 4/5] ARM: vfp: Use cpu pm notifiers to save vfp state   Santosh Shilimkar
• [PATCH v2 5/5] ARM: gic: Allow gic arch extensions to provide irqchip flags   Santosh Shilimkar
• [PATCH] rtc: rtc-s3c: Add device tree support   Thomas Abraham
• [PATCH 08/11] ARM: pm: no need to save/restore context ID register   Santosh
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Santosh
• 3rd Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Paul Walmsley
• [PATCH] ARM: l2x0: make sure I&D are not locked down on init   Linus Walleij
• [PATCH] arm: exynos4: fix incorrect pad configuration for keypad row lines   Thomas Abraham
• [PATCH] arm: exynos4: fix incorrect pad configuration for keypad row lines   Alan Cox
• [PATCH 08/11] ARM: pm: no need to save/restore context ID register   Russell King - ARM Linux
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Russell King - ARM Linux
• [PATCH] ARM: l2x0: make sure I&D are not locked down on init   Santosh
• [PATCH] arm: exynos4: fix incorrect pad configuration for keypad row lines   Thomas Abraham
• [PATCH] ARM: l2x0: make sure I&D are not locked down on init   Will Deacon
• [PATCH] ARM: l2x0: make sure I&D are not locked down on init   Santosh
• [PATCH] ARM: remove missing cns3xxx includes   Sergei Shtylyov
• [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Santosh Shilimkar
• [PATCH 01/25] ARM: mm: Add strongly ordered descriptor support.   Santosh Shilimkar
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Santosh Shilimkar
• [PATCH 03/25] OMAP4: PM: Use custom omap_do_wfi() for suspend and default idle.   Santosh Shilimkar
• [PATCH 04/25] OMAP4: Remove un-used do_wfi() macro.   Santosh Shilimkar
• [PATCH 05/25] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit   Santosh Shilimkar
• [PATCH 06/25] OMAP4: Export omap4_get_base*() rather than global address pointers   Santosh Shilimkar
• [PATCH 07/25] OMAP4: PM: Add SAR RAM support   Santosh Shilimkar
• [PATCH 08/25] OMAP4: PM: Keep static dep between MPUSS-EMIF and MPUSS-L3 and DUCATI-L3   Santosh Shilimkar
• [PATCH 09/25] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0   Santosh Shilimkar
• [PATCH 10/25] OMAP4: PM: Initialise all the clockdomains to supported states   Santosh Shilimkar
• [PATCH 11/25] OMAP: Add Secure HAL and monitor mode API infrastructure.   Santosh Shilimkar
• [PATCH 12/25] OMAP: Add support to allocate the memory for secure RAM   Santosh Shilimkar
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh Shilimkar
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Santosh Shilimkar
• [PATCH 15/25] OMAP4: Remove __INIT from omap_secondary_startup() to re-use it for hotplug.   Santosh Shilimkar
• [PATCH 16/25] OMAP4: PM: Program CPU1 to hit OFF when off-lined   Santosh Shilimkar
• [PATCH 17/25] OMAP4: PM: CPU1 wakeup workaround from Low power modes   Santosh Shilimkar
• [PATCH 18/25] OMAP4: suspend: Add MPUSS power domain RETENTION support   Santosh Shilimkar
• [PATCH 19/25] OMAP4: PM: Add WakeupGen and secure GIC low power support   Santosh Shilimkar
• [PATCH 20/25] OMAP4: PM: Add L2X0 cache lowpower support   Santosh Shilimkar
• [PATCH 21/25] OMAP4: PM: Add MPUSS power domain OSWR support   Santosh Shilimkar
• [PATCH 22/25] OMAP4: PM: Add power domain statistics support   Santosh Shilimkar
• [PATCH 23/25] OMAP4: PM: Add CPUidle support   Santosh Shilimkar
• [PATCH 24/25] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.   Santosh Shilimkar
• [PATCH 25/25] OMAP3: CPUidle: Make use of CPU PM notifiers   Santosh Shilimkar
• [PATCH] ARM: remove missing cns3xxx includes   Imre Kaloz
• [PATCHv2] ARM: remove missing cns3xxx includes   Imre Kaloz
• [PATCH] mach-integrator: fix VGA base regression   Linus Walleij
• [PATCH 1/2] s3c24xx_gpiolib_init: only register available gpio banks   Peter Korsgaard
• [PATCH 2/2] s3c2410/gpio-nr.h: fix S3C_GPIO_SPACE #error message to match reality   Peter Korsgaard
• [PATCH 1/2] mmc: sdhci-s3c: add default controller configuration   Jaehoon Chung
• [PATCH 2/4] OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain   Paul Walmsley
• [PATCH 4/4] OMAP: powerdomain: remove omap_chip bitmasks   Paul Walmsley
• [PATCH] OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[]   Paul Walmsley
• [PATCH] OMAP2+: hwmod: remove OMAP_CHIP*   Paul Walmsley
• [PATCH] OMAP: id: remove OMAP_CHIP declarations, code   Paul Walmsley
• [PATCH] arm: ixp4xx, u300: Select ARCH_REQUIRE_GPIOLIB, not GENERIC_GPIO   Ben Hutchings
• [PATCH] mach-integrator: fix VGA base regression   Rob Herring
• [PATCH 1/3] ARM: CSR: add lost Resource Sharing Control(RSC) node in dts   Barry Song
• [PATCH 2/3] ARM: CSR: extend the compatibility of gpio controller to pinmux in dts   Barry Song
• [PATCH 3/3] ARM: CSR: IRQ: add simple irq_domain so that hw irq can map to Linux   Barry Song
• [PATCH 1/2] mmc: sdhci-s3c: add default controller configuration   Kukjin Kim
• [PATCH 2/2] arm: samsung: remove sdhci default configuration setup platform helper   Kukjin Kim
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Kukjin Kim
• [PATCH 0/6] Add device tree support for PL330 dma controller driver   Kukjin Kim
• [PATCH] mach-integrator: fix VGA base regression   Linus Walleij
• [PATCH] arm: ixp4xx, u300: Select ARCH_REQUIRE_GPIOLIB, not GENERIC_GPIO   Arnaud Patard (Rtp)
• [PATCH v2] ARM: l2x0: make sure I&D are not locked down on init   Linus Walleij
• [PATCH 1/2] mmc: sdhci-s3c: add default controller configuration   Thomas Abraham
• [PATCH v2] mach-ux500: unlock I&D l2x0 caches before init   Linus Walleij
• [PATCH v2] ARM: l2x0: make sure I&D are not locked down on init   Santosh
• [PATCH 1/2] mmc: sdhci-s3c: add default controller configuration   Thomas Abraham
• Kernel crash (2.6.35.13)   naveen yadav
• 3rd Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Cousson, Benoit
• [PATCH] at91: add Atmel ISI and ov2640 support on m10/g45 board.   Wu, Josh
• [PATCH v2 1/3] dmaengine: imx-sdma: use platform_device_id to identify sdma version   Uwe Kleine-König
• [PATCH v2 2/3] dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name   Uwe Kleine-König
• [PATCH v2 3/3] dmaengine: imx-sdma: add device tree probe support   Uwe Kleine-König
• [PATCH 2/6] ARM: plat-omap: make OMAP_UART_INFO into a relative offset   Tony Lindgren
• [PATCH 2.5/6] ARM: omap: prepare debug-macro.S for offset based calculation of omap_uart_phys and virt   Tony Lindgren
• [PATCH 3/6] ARM: mach-omap1: clean up debug-macro.S   Tony Lindgren
• [PATCH 4/6] ARM: mach-omap2: clean up debug-macro.S   Tony Lindgren
• [PATCH 3/6] ARM: mach-omap1: clean up debug-macro.S   Tony Lindgren
• [RFC 6/7] iommu/core: add fault reporting   Roedel, Joerg
• [PATCH 22/25] OMAP4: PM: Add power domain statistics support   Sergei Shtylyov
• [PATCH 05/25] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit   Sergei Shtylyov
• [PATCH 2/2] arm: samsung: remove sdhci default configuration setup platform helper   Thomas Abraham
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH 2/2] ARM: SAMSUNG: Fix mask for S3C64xx CPU IDs   Kukjin Kim
• [PATCH] ARM: S5P64X0: Fix mask value for S5P64X0 CPU IDs   Kukjin Kim
• [PATCH] ARM: S3C64XX: Add devices for Kilchoman audio module on Cragganmore   Kukjin Kim
• [PATCH] ARM: S3C64XX: Register Lowland audio device on Cragganmore   Kukjin Kim
• [PATCH] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Josh Wu
• testing-board branch: rebase to RMK's devel-stable?   Tony Lindgren
• [PATCH] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Russell King - ARM Linux
• [PATCH] arm: ixp4xx, u300: Select ARCH_REQUIRE_GPIOLIB, not GENERIC_GPIO   Russell King - ARM Linux
• [PATCH 05/25] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit   Santosh
• [PATCH 22/25] OMAP4: PM: Add power domain statistics support   Santosh
• [PATCH 6/7] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Joerg Roedel
• [PATCH 05/25] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit   Russell King - ARM Linux
• [PATCH 05/25] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit   Santosh
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH] OMAP2+: hwmod: remove OMAP_CHIP*   Grazvydas Ignotas
• [PATCH 6/7] OMAP3: board-dt: Add generic board file for DT support   G, Manjunath Kondaiah
• [PATCH] arm: ixp4xx, u300: Select ARCH_REQUIRE_GPIOLIB, not GENERIC_GPIO   Arnaud Patard (Rtp)
• [PATCH] mach-integrator: fix VGA base regression   Linus Walleij
• [PATCH] arm: ixp4xx, u300: Select ARCH_REQUIRE_GPIOLIB, not GENERIC_GPIO   Linus Walleij
• [PATCH] spi: Fix builderror in spi-pl022.c   Linus Walleij
• [RFC/PATCH] ARM: ixp4xx gpiolib support   Imre Kaloz
• [PATCH 0/6] Add device tree support for PL330 dma controller driver   Vinod Koul
• [PATCH] dmaengine: amba-pl08x: make filter check that the channel is owned by pl08x   Vinod Koul
• [PATCH v8 04/16] DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command   Vinod Koul
• [PATCH 20/25] OMAP4: PM: Add L2X0 cache lowpower support   Lorenzo Pieralisi
• [PATCH 20/25] OMAP4: PM: Add L2X0 cache lowpower support   Santosh
• [PATCH] mach-integrator: fix VGA base regression   Arnd Bergmann
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Arnd Bergmann
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Cousson, Benoit
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Arnd Bergmann
• [PATCH 4.5/6] ARM: omap: pass phys, virt and lsr from uncompress.h to debug-macro.S   Tony Lindgren
• [PATCH v11 1/3] MTD : add the common code for GPMI-NAND controller driver   Wolfram Sang
• [PATCH] OMAP2+: hwmod: remove OMAP_CHIP*   Tony Lindgren
• [PATCH] mach-integrator: fix VGA base regression   Rob Herring
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Tony Lindgren
• [PATCH 04/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Cousson, Benoit
• A question about the abbreviation of the Cache Size Selection Register   Catalin Marinas
• [PATCH] arm: ixp4xx, u300: Select ARCH_REQUIRE_GPIOLIB, not GENERIC_GPIO   Ben Hutchings
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Arnd Bergmann
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Mitch Bradley
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Eric Miao
• [PATCH 2/2] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Ohad Ben-Cohen
• [PATCH 2/6] ARM: plat-omap: make OMAP_UART_INFO into a relative offset   Nicolas Pitre
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Arnaud Patard (Rtp)
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Phil Sutter
• [PATCH] ARM: Footbridge: Sort KConfig Options alphabetically   Peter Huewe
• [PATCH] mach-integrator: fix the clocksource   Linus Walleij
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Ohad Ben-Cohen
• [PATCH v2 5/7] ARM: highbank: add SMP support   Shawn Guo
• [PATCH v11 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
• [PATCH v2 0/5] CPU PM notifiers   Shawn Guo
• [PATCH] [media] at91: add code to initialize and manage theISI_MCK for Atmel ISI driver.   Wu, Josh
• [PATCH v2 0/5] CPU PM notifiers   Santosh
• [PATCH] mach-integrator: fix VGA base regression   Linus Walleij
• [PATCH] dmaengine: amba-pl08x: make filter check that the channel is owned by pl08x   Linus Walleij
• [PATCH v2 0/2] make reinitialization of ARM core components possible   Shawn Guo
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Shawn Guo
• [PATCH v2 2/2] ARM: smp_scu: remove __init annotation from scu_enable()   Shawn Guo
• [PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Josh Wu
• [PATCH v2 0/2] make reinitialization of ARM core components possible   Santosh
• [PATCH] at91: add Atmel ISI and ov2640 support on m10/g45 board.   Jean-Christophe PLAGNIOL-VILLARD
• [RFC/PATCH] ARM: ixp4xx gpiolib support   Arnaud Patard (Rtp)
• [PATCH] ARM: S3C64XX: Raise the frequency of the second I2C bus on Cragganmore   Mark Brown
• [PATCH v4] mach-realview: expose PB1176 ROM using physmap and map_rom   Linus Walleij
• [PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Guennadi Liakhovetski
• [PATCH v2 0/2] make reinitialization of ARM core components possible   Santosh
• [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Linus Walleij
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Linus Walleij
• [PATCH 2/7] arm/dts: OMAP3: Add mpu and iva nodes   Cousson, Benoit
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Linus Walleij
• [PATCH] arm: ixp4xx, u300: Select ARCH_REQUIRE_GPIOLIB, not GENERIC_GPIO   Linus Walleij
• [PATCH 1/2] ux500: Adding support for u8500 Hsem functionality V2   Ohad Ben-Cohen
• [RFC/PATCH] ARM: ixp4xx gpiolib support   Uwe Kleine-König
• [PATCH] OMAP: hsmmc: Fix mux for non-OMAP pins   Thomas Weber
• [PATCH] OMAP: hsmmc: Fix mux for non-OMAP pins   Uwe Kleine-König
• [PATCH] ARM: i.MX5/mm: use static mapping for TZIC   Uwe Kleine-König
• [PATCH] gpio: rewrite U300 GPIO to use gpiolib   Linus Walleij
• [PATCH] ARM: mxs: Add initial support for DENX MX28   Uwe Kleine-König
• [PATCH] ARM: mxs: Add initial support for DENX MX28   Wolfram Sang
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Hector Oron
• [PATCH] gpio: rewrite U300 GPIO to use gpiolib   Russell King - ARM Linux
• [PATCH] ARM: mxs: Add initial support for DENX MX28   Lothar Waßmann
• [PATCH] ARM: mxs: Add initial support for DENX MX28   Stefano Babic
• [PATCH] ARM: mxs: Add initial support for DENX MX28   Stefano Babic
• [PATCH] gpio: rewrite U300 GPIO to use gpiolib   Linus Walleij
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Tony Lindgren
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• FW: [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Phil Sutter
• [PATCH] gpio: rewrite U300 GPIO to use gpiolib   Arnaud Patard (Rtp)
• [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Russell King - ARM Linux
• [PATCH 0/6] add initial imx6q support   Shawn Guo
• [PATCH 1/6] arm/imx6q: add device tree source   Shawn Guo
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH 5/6] arm/imx6q: add device tree machine support   Shawn Guo
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH/RFC 0/7] iommu: fixes & extensions   Roedel, Joerg
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Tony Lindgren
• [PATCH 2/2] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   KyongHo Cho
• [PATCH v11 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Tomasz Figa
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Tony Lindgren
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Russell King - ARM Linux
• [PATCH] af_packet: flush complete kernel cache in packet_sendmsg   Phil Sutter
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Linus Walleij
• [PATCH/RFC 0/7] iommu: fixes & extensions   Ohad Ben-Cohen
• [GIT PULL v3] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc   Tony Lindgren
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Tomasz Figa
• [GIT PULL v3] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc   Russell King - ARM Linux
• [PATCH] head.S: The official name of the Cache Size Selection Register is CSSELR.   Il Han
• [PATCH] head.S: The official name of the Cache Size Selection Register is CSSELR.   Catalin Marinas
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Russell King - ARM Linux
• [PATCH v8 04/16] DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command   Jassi Brar
• [PATCH v8 04/16] DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command   Russell King - ARM Linux
• [Linaro-mm-sig] [PATCH 2/2] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver   Ohad Ben-Cohen
• [PATCH v8 04/16] DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command   Jassi Brar
• OMAP2+: hwmod: remove OMAP_CHIP*   Aaro Koskinen
• [PATCH] ARM: mxs: Add initial support for DENX MX28   Shawn Guo
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Eric Miao
• [PATCH] mach-integrator: fix VGA base regression   Rob Herring
• [PATCH] DaVinci: correct MDSTAT_STATE_MASK   Sergei Shtylyov
• [PATCH 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH] arm: omap: Fix build error in ispccdc.c   Joerg Roedel
• [PATCH 0/2] video: s3c-fb: Add window positioning support   Ajay kumar
• [PATCH v11 1/3] MTD : add the common code for GPMI-NAND controller driver   Wolfram Sang
• [PATCH v2 1/2] ASoC: mxs-saif: add record function   Dong Aisheng-B29396
• [PATCH 1/3] add dma_coherent_write_sync to DMA API   Catalin Marinas
• [PATCH 2/3] define ARM-specific dma_coherent_write_sync   Catalin Marinas
• [PATCH 2/3] define ARM-specific dma_coherent_write_sync   Mark Salter
• [PATCH 2/3] define ARM-specific dma_coherent_write_sync   Catalin Marinas
• [PATCH 2/3] define ARM-specific dma_coherent_write_sync   Mark Salter
• [PATCH] arm: omap: Fix build error in ispccdc.c   Laurent Pinchart
• [PATCH] OMAP2: Devkit8000: Remove double omap_mux_init_gpio   Thomas Weber
• [PATCH] Optimize multi-CPU tlb flushing a little more   Catalin Marinas
• Help in running top of git on Freescale MX28 EVK board   Sam Gandhi
• [PATCH] DaVinci: correct MDSTAT_STATE_MASK   Nori, Sekhar
• [PATCH 0/6] add initial imx6q support   Arnd Bergmann
• [PATCH 2.5/6] ARM: omap: prepare debug-macro.S for offset based calculation of omap_uart_phys and virt   Nicolas Pitre
• [PATCH 1/6] arm/imx6q: add device tree source   Arnd Bergmann
• [PATCH 3/6] ARM: mach-omap1: clean up debug-macro.S   Nicolas Pitre
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Arnd Bergmann
• [PATCH 4.5/6] ARM: omap: pass phys, virt and lsr from uncompress.h to debug-macro.S   Nicolas Pitre
• [PATCH 4/6] arm/imx6q: add smp and cpu hotplug support   Arnd Bergmann
• [PATCH 5/6] arm/imx6q: add device tree machine support   Arnd Bergmann
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Arnd Bergmann
• [PATCH 1/4] ARM: mx53: Add pads for flexcan pins   Rogerio Pimentel
• [PATCH 2/4] ARM: mx53: Add clock for flexcan   Rogerio Pimentel
• [PATCH 3/4] ARM: mx53: Add resources for flexcan   Rogerio Pimentel
• [PATCH 4/4] ARM: mx53_ard: Add flexcan support   Rogerio Pimentel
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Arnd Bergmann
• [GIT PULL] i.MX features for next   Uwe Kleine-König
• [PATCH 3/4] ARM: mx53: Add resources for flexcan   Uwe Kleine-König
• [PATCH 4/4] ARM: mx53_ard: Add flexcan support   Uwe Kleine-König
• [PATCH 1/4] ARM: mx53: Add pads for flexcan pins   Uwe Kleine-König
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH 0/6] add initial imx6q support   Uwe Kleine-König
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Uwe Kleine-König
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Greg KH
• Help in running top of git on Freescale MX28 EVK board   Sam Gandhi
• [PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: platform_device: pdev_archdata: add omap_device pointer   Kevin Hilman
• [PATCH] OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers   Kevin Hilman
• [PATCH] OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers   Kevin Hilman
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Uwe Kleine-König
• Help in running top of git on Freescale MX28 EVK board   Uwe Kleine-König
• [PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Sylwester Nawrocki
• [PATCH 0/6] OMAP/Davinci debug UART code cleanup   Kevin Hilman
• [GIT PULL] I2C: OMAP: misc. cleanup for v3.2   Kevin Hilman
• [GIT PULL] gpio/omap: minor cleanups for v3.2   Kevin Hilman
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH REPOST 0/3] i2c: tegra: Outstanding patches   Ben Dooks
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   Kevin Hilman
• [PATCH v6 19/25] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Kevin Hilman
• [PATCH v6 20/25] gpio/omap: skip operations in runtime callbacks   Kevin Hilman
• [PATCH v6 21/25] gpio/omap: remove omap_gpio_save_context overhead   Kevin Hilman
• [PATCH v6 22/25] gpio/omap: save and restore debounce registers   Kevin Hilman
• [PATCH v6 24/25] gpio/omap: restore OE only after setting the output level   Kevin Hilman
• [PATCH v6 25/25] gpio/omap: handle set_dataout reg capable IP on restore   Kevin Hilman
• [PATCH v6 23/25] gpio/omap: enable irq at the end of all configuration in restore   Kevin Hilman
• [RFC 7/7] iommu/core: split mapping to page sizes as supported by the hardware   KyongHo Cho
• [PATCH 0/6] OMAP/Davinci debug UART code cleanup   Nicolas Pitre
• [PATCH 0/6] add initial imx6q support   Shawn Guo
• [PATCH 0/6] add initial imx6q support   Shawn Guo
• [PATCH 5/6] arm/imx6q: add device tree machine support   Shawn Guo
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [PATCH 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH 4/6] arm/imx6q: add smp and cpu hotplug support   Shilimkar, Santosh
• [PATCH v6 19/25] gpio/omap: cleanup prepare_for_idle and resume_after_idle   DebBarma, Tarun Kanti
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v6 20/25] gpio/omap: skip operations in runtime callbacks   DebBarma, Tarun Kanti
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [RFC 7/7] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH 2/5] ARM: SAMSUNG: Make the sleep code common for S3C64XX and newer SoCs   Kukjin Kim
• [PATCH 3/5] ARM: S5P64X0: Add pm save/restore functions for GPIO banks   Kukjin Kim
• [PATCH 4/5] ARM: S5P64X0: Fix incorrect serial clock name   Kukjin Kim
• [PATCH 5/5] ARM: S5P64X0: Add Power Management support   Kukjin Kim
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH 1/5] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH v6 22/25] gpio/omap: save and restore debounce registers   DebBarma, Tarun Kanti
• [PATCH v6 24/25] gpio/omap: restore OE only after setting the output level   DebBarma, Tarun Kanti
• [PATCH] ARM: mxs: Add initial support for DENX MX28   Stefano Babic
• [PATCH 4/5] ARM: S5P64X0: Fix incorrect serial clock name   Abhilash Kesavan
• [PATCH 5/5] ARM: S5P64X0: Add Power Management support   Abhilash Kesavan
• [PATCH 2/5] ARM: SAMSUNG: Make the sleep code common for S3C64XX and newer SoCs   Abhilash Kesavan
• [PATCH 3/5] ARM: S5P64X0: Add pm save/restore functions for GPIO banks   Abhilash Kesavan
• [PATCH V2] ARM: mxs: Add initial support for DENX MX28   Stefano Babic
• [PATCH 00/14] McBSP cleanup and generalization   Péter Ujfalusi
• [PATCH V3 4/7] ARM: S5P64X0: Add GPIO and SPCON settings for LCD   Kukjin Kim
• [PATCH V3 5/7] ARM: S5P64X0: Add file to hold common Framebuffer and LCD code   Kukjin Kim
• [PATCH V3 1/7] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata   Kukjin Kim
• [PATCH v8 04/16] DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command   Kukjin Kim
• [PATCH 0/3] ARM: SAMSUNG: register the second instance of PL330 DMAC   Kukjin Kim
• [PATCH 5/6] arm/imx6q: add device tree machine support   Arnd Bergmann
• [PATCH v6 25/25] gpio/omap: handle set_dataout reg capable IP on restore   DebBarma, Tarun Kanti
• [PATCH 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH v8 04/16] DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command   Jassi Brar
• [PATCH] mtd: drop Integrator flash map Kconfig   Linus Walleij
• [PATCH] mach-integrator: fix VGA base regression   Linus Walleij
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Arnd Bergmann
• [RFC 7/7] iommu/core: split mapping to page sizes as supported by the hardware   KyongHo Cho
• [PATCH 27/62] [SCSI] irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 33/62] dmaengine: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 36/62] i2c: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 38/62] Input: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 52/62] rtc: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 55/62] USB: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 56/62] video: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 58/62] watchdog: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 60/62] sound: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH v2] gpio: rewrite U300 GPIO to use gpiolib   Linus Walleij
• [PATCH] gpio: rewrite U300 GPIO to use gpiolib   Linus Walleij
• [PATCH] mtd: drop Integrator flash map Kconfig   Marc Zyngier
• [PATCH 0/4] Integrator/AP clockevent patches   Linus Walleij
• [PATCH 1/4] mach-integrator: retire some timer macros   Linus Walleij
• [PATCH 2/4] mach-integrator: clockevent supports oneshot mode   Linus Walleij
• [PATCH 3/4] mach-integrator: modernize clock event registration   Linus Walleij
• =?y?q?=5BPATCH=204/4=5D=20mach-integrator=3A=20get=20timer=20frequency=20from=20clock?=   Linus Walleij
• [PATCH 60/62] sound: irq: Remove IRQF_DISABLED   Péter Ujfalusi
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH] at91/usb: always provide all the clocks   Nicolas Ferre
• [PATCH 11/22] OMAP4: powerdomain data: add voltage domains   Jean Pihet
• [RFC 7/7] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH 13/22] OMAP2+: voltage: keep track of powerdomains in each voltagedomain   Jean Pihet
• [PATCH V2] ARM: mxs: Add initial support for DENX MX28   Wolfram Sang
• [PATCH V2] ARM: mxs: Add initial support for DENX MX28   Stefano Babic
• [PATCH 0/6] add initial imx6q support   Arnd Bergmann
• [RFC 7/7] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH 17/22] OMAP2+: voltage: split out voltage processor (VP) code into new layer   Jean Pihet
• [PATCH 2/5] ARM: SAMSUNG: Make the sleep code common for S3C64XX and newer SoCs   Russell King - ARM Linux
• [PATCH v11 1/3] MTD : add the common code for GPMI-NAND controller driver   Wolfram Sang
• [PATCH 1/4] mach-integrator: retire some timer macros   Thomas Gleixner
• [PATCH 3/4] mach-integrator: modernize clock event registration   Thomas Gleixner
• [PATCH 4/4] mach-integrator: get timer frequency from clock   Thomas Gleixner
• [PATCH] Add platform driver support to the CS890x driver   Jaccon Bastiaansen
• [PATCH] Add CS890x0 ethernet controller support to the i.MX21ADS   Jaccon Bastiaansen
• [PATCH 09/22] OMAP2: add voltage domains and connect to powerdomains   Jean Pihet
• [PATCH 14/22] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer   Jean Pihet
• [PATCH 1/3] ohci-at91: add vbus_pin_inverted platform attribute   Nicolas Ferre
• [PATCH 2/3] at91-ohci: support overcurrent notification   Nicolas Ferre
• [PATCH 3/3] at91-ohci: configure overcurrent pins as input GPIOs   Nicolas Ferre
• [RFC PATCH 5/5] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Dave Martin
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH 3.1-rc1] ARM: entry: fix wrong parameter used in do_thumb_abort   Janusz Krzysztofik
• [PATCH 1/6] arm/imx6q: add device tree source   Shawn Guo
• [PATCH 2/5] ARM: SAMSUNG: Make the sleep code common for S3C64XX and newer SoCs   Abhilash Kesavan
• [RFC PATCH] mmc: sdio: rw extended, use a sg entry for each block   Nicolas Ferre
• [PATCH 3.1-rc1] ARM: entry: fix wrong parameter used in do_thumb_abort   Russell King - ARM Linux
• [GIT PULL] DaVinci fixes for v3.1-rc6   Nori, Sekhar
• [PATCH 09/12] OMAP: VP: Explicitly mask VPVOLTAGE field   Jean Pihet
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   Kevin Hilman
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Uwe Kleine-König
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Barry Song
• [PATCH] Add platform driver support to the CS890x driver   Uwe Kleine-König
• [PATCH v3 1/1] ASoC: mxs-saif: add record function   Dong Aisheng
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH v4 00/11] OMAP2+: Serial: Runtime adaptation + cleanup   Govindraj.R
• [PATCH v4 01/11] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Govindraj.R
• [PATCH v4 02/11] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH v4 03/11] OMAP2+: UART: cleanup + remove certain uart calls from pm code   Govindraj.R
• [PATCH v4 04/11] OMAP2+: UART: Remove uart clock handling code from serial.c   Govindraj.R
• [PATCH v4 05/11] OMAP2+: Serial: Add default mux for all uarts.   Govindraj.R
• [PATCH v4 06/11] Serial: OMAP: Store certain reg values to port structure   Govindraj.R
• [PATCH v4 07/11] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj.R
• [PATCH v4 08/11] Serial: OMAP2+: Move erratum handling from serial.c   Govindraj.R
• [PATCH v4 09/11] OMAP2+: Serial: Use prepare and resume calls to gate uart clocks   Govindraj.R
• [PATCH v4 10/11] OMAP: Serial: Allow UART parameters to be configured from board file.   Govindraj.R
• [PATCH v4 11/11] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART   Govindraj.R
• [PATCH v2] gpio: rewrite U300 GPIO to use gpiolib   Barry Song
• [PATCH 3/3] at91-ohci: configure overcurrent pins as input GPIOs   Nicolas Ferre
• [PATCH] ARM: alignment: setup alignment handler earlier   John Ogness
• [PATCH] at91/usb: always provide all the clocks   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91/usb: always provide all the clocks   Nicolas Ferre
• [PATCH v2] at91/usb: always provide all the clocks   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Barry Song
• [PATCH] ARM: alignment: setup alignment handler earlier   Måns Rullgård
• [PATCH v2 0/3] ARM: mxs: add recording support for saif   Dong Aisheng
• [PATCH v2 1/3] ARM: mx28evk: add platform data for saif   Dong Aisheng
• [PATCH v2 2/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng
• [PATCH v2 3/3] arm: mxs: disable clock-gates when setting saif-clocks   Dong Aisheng
• [PATCH] at91/usb: always provide all the clocks   Nicolas Ferre
• Tasks schedule/migration issue with CPU hotplug?   TAO HU
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Russell King - ARM Linux
• [PATCH] ARM: alignment: setup alignment handler earlier   Catalin Marinas
• [PATCH v2] at91/usb: always provide all the clocks   Nicolas Ferre
• [PATCH] ARM: alignment: setup alignment handler earlier   Catalin Marinas
• [PATCH 33/62] dmaengine: irq: Remove IRQF_DISABLED   Vinod Koul
• [PATCH 0/2] video: s3c-fb: Add window positioning support   Laurent Pinchart
• KVM ARM interrupt virtualization   Catalin Marinas
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Nicolas Pitre
• [PATCH 03/11] ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness   Catalin Marinas
• [GIT PULL] DaVinci fixes for v3.1-rc6   Karicheri, Muralidharan
• [PATCH 10/11] ARM: pm: convert some assembly to C   Lorenzo Pieralisi
• [RFC PATCH 0/3] ARM: iwmmxt/pj4 fixes for v7/Thumb-2   Dave Martin
• [RFC PATCH 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Dave Martin
• [RFC PATCH 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Dave Martin
• [RFC PATCH 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Dave Martin
• [PATCH] ARM: tegra: Remove redundant change to the CPSR in headsmp.S   Dave Martin
• [PATCH] ARM: Documentation: Update the Booting document with SMP boot advice   Dave Martin
• [RFC PATCH 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Eric Miao
• [RFC PATCH 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Eric Miao
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Koul, Vinod
• [RFC PATCH 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Eric Miao
• [PATCH 03/11] ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness   Russell King - ARM Linux
• [PATCH 03/11] ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness   Catalin Marinas
• [PATCH] ARM: alignment: setup alignment handler earlier   Russell King - ARM Linux
• [RFC 6/7] iommu/core: add fault reporting   Ohad Ben-Cohen
• [PATCH] ARM: alignment: setup alignment handler earlier   Måns Rullgård
• [PATCH] ARM: alignment: setup alignment handler earlier   Catalin Marinas
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH 03/11] ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness   Catalin Marinas
• [PATCH] ARM: alignment: setup alignment handler earlier   Russell King - ARM Linux
• [PATCH 60/62] sound: irq: Remove IRQF_DISABLED   Mark Brown
• [RFC PATCH 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Nicolas Pitre
• [PATCH] ARM: alignment: setup alignment handler earlier   Catalin Marinas
• [PATCH] ARM: alignment: setup alignment handler earlier   Måns Rullgård
• [PATCH 3.1-rc1] ARM: entry: fix wrong parameter used in do_thumb_abort   Janusz Krzysztofik
• [PATCH v2] gpio: rewrite U300 GPIO to use gpiolib   Grant Likely
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Koul, Vinod
• [PATCH v2 1/3] ARM: mx28evk: add platform data for saif   Uwe Kleine-König
• [PATCH v2 2/3] ARM: mx28evk: set a initial clock rate for saif   Uwe Kleine-König
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Dmitry Torokhov
• [PATCH v2 3/3] arm: mxs: disable clock-gates when setting saif-clocks   Uwe Kleine-König
• [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Koul, Vinod
• [PATCH 1/3] iommu/core: add fault reporting mechanism   Ohad Ben-Cohen
• [PATCH 2/3] iommu/omap: migrate to the generic fault report mechanism   Ohad Ben-Cohen
• [PATCH 3/3] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Mark Brown
• [PATCH 1/2] OMAP2/3: PM: trigger CPU PM notifiers in idle and suspend path   Kevin Hilman
• [RFC] Kbuild: allow code re-use across different directories   Nicolas Pitre
• [PATCH 0/7] OMAP: voltage cleanup part D: voltage domain   Jean Pihet
• [PATCH 00/10] OMAP: voltage cleanup part B: VC cleanup   Jean Pihet
• [PATCH 00/12] OMAP: voltage cleanup part C: VP cleanup   Jean Pihet
• [PATCH 00/22] OMAP: voltage cleanup part A   Jean Pihet
• [PATCH v2] gpio: rewrite U300 GPIO to use gpiolib   Linus Walleij
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Linus Walleij
• [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [RFC] Kbuild: allow code re-use across different directories   Nicolas Pitre
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Kevin Hilman
• [RFC PATCH 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Arnd Bergmann
• [RFC PATCH 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Arnd Bergmann
• [RFC PATCH 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Arnd Bergmann
• [PATCH] media i.MX27 camera: remove legacy dma support   Guennadi Liakhovetski
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Dmitry Torokhov
• [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Dmitry Torokhov
• [PATCH 00/14] McBSP cleanup and generalization   Janusz Krzysztofik
• [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Linus Walleij
• [PATCH 38/62] Input: irq: Remove IRQF_DISABLED   Dmitry Torokhov
• [PATCH V2] ARM: mxs: Add initial support for DENX MX28   Marek Vasut
• [PATCH v8 04/16] DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command   Boojin Kim
• [RFC PATCH v2 5/6] TI81XX: Add minimal hwmod data   Pedanekar, Hemant
• [PATCH 3/3] TI814X: Create board support and enable build for TI8148 EVM   Pedanekar, Hemant
• [PATCH v11 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
• KVM ARM interrupt virtualization   carson bill
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v12 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
• [PATCH v12 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Huang Shijie
• [PATCH v12 3/3] MTD : add GPMI-NAND driver in the config and Makefile   Huang Shijie
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH v3 0/4] Consolidate and clean up the arch/arm/mach-mx5/mm-*.c   Jason Liu
• [PATCH v3 1/4] ARM: i.MX5/mm: Consolidate arch/arm/mach-mx5/mm-*.c   Jason Liu
• [PATCH v3 2/4] ARM: i.MX5/mm: Remove MX51_DEBUG related mapping   Jason Liu
• [PATCH v3 3/4] ARM: i.MX5/mm: add the TZIC mapping resource   Jason Liu
• [PATCH v3 4/4] ARM: i.MX5/mm: consolidate TZIC map code   Jason Liu
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
• [PATCH v2] gpio: rewrite U300 GPIO to use gpiolib   Grant Likely
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Santosh
• [PATCH 0/8] OMAP3/4: Misc fixes and clean-up   Santosh Shilimkar
• [PATCH 1/8] OMAP: hwmod: Fix the addr spaces count API.   Santosh Shilimkar
• [PATCH 2/8] OMAP: Improve register access in L3 Error handler.   Santosh Shilimkar
• [PATCH 3/8] OMAP: Fix a BUG in l3 error handler.   Santosh Shilimkar
• [PATCH 4/8] OMAP: Fix indentation issues in l3 error handler.   Santosh Shilimkar
• [PATCH 5/8] OMAP: Fix sparse warnings in l3 error handler.   Santosh Shilimkar
• [PATCH 6/8] OMAP: Print Initiator name for l3 custom error.   Santosh Shilimkar
• [PATCH 7/8] OMAP4: clock: Add CPU local timer clock node.   Santosh Shilimkar
• [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping   Santosh Shilimkar
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH] media i.MX27 camera: remove legacy dma support   Robert Schwebel
• Tasks schedule/migration issue with CPU hotplug?   TAO HU
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [GIT PULL] DaVinci fixes for v3.1-rc6   Nori, Sekhar
• [PATCH REPOST v2 0/2] Add device tree probe for i2c-imx driver   Shawn Guo
• [PATCH REPOST 1/2] i2c-imx: remove init/exit hooks from platform data   Shawn Guo
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Shawn Guo
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Cousson, Benoit
• Tasks schedule/migration issue with CPU hotplug?   Yong Zhang
• Tasks schedule/migration issue with CPU hotplug?   Yong Zhang
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Russell King - ARM Linux
• [PATCH 1/8] OMAP: hwmod: Fix the addr spaces count API.   Cousson, Benoit
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH v2 1/3] ARM: mx28evk: add platform data for saif   Dong Aisheng-B29396
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [PATCH v2] gpio: rewrite U300 GPIO to use gpiolib   Linus Walleij
• [PATCH v2 2/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng-B29396
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Cousson, Benoit
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [PATCH v2 3/3] arm: mxs: disable clock-gates when setting saif-clocks   Dong Aisheng-B29396
• [RFC PATCH 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Dave Martin
• KVM ARM interrupt virtualization   Catalin Marinas
• [PATCH 3/4] mach-integrator: modernize clock event registration   Russell King - ARM Linux
• [PATCH v2 2/3] ARM: mx28evk: set a initial clock rate for saif   Uwe Kleine-König
• [RFC PATCH 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Dave Martin
• [RFC PATCH 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Haojian Zhuang
• [RFC PATCH 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Russell King - ARM Linux
• [PATCH v2 2/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng-B29396
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Russell King - ARM Linux
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH 3/4] mach-integrator: modernize clock event registration   Linus Walleij
• [PATCH 3/4] mach-integrator: modernize clock event registration   Thomas Gleixner
• [PATCH 3/4] mach-integrator: modernize clock event registration   Thomas Gleixner
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH] ARM: supply a DTB file to be appended   Linus Walleij
• [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Linus Walleij
• KVM ARM interrupt virtualization   bill4carson
• [RFC PATCH 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Sergei Shtylyov
• [RFC PATCH 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Dave Martin
• [RFC PATCH 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Dave Martin
• [Android-virt] KVM ARM interrupt virtualization   Peter Maydell
• [PATCH v3 0/2] AM3517: Booting up   Abhilash K V
• [PATCH v3 1/2] AM35x: Using OMAP3 generic hwmods   Abhilash K V
• [PATCH v3 2/2] omap_twl: Prevent SR to enable for am3517/am3505 devices   Abhilash K V
• [PATCH v2 0/3] AM35x: Adding PM init   Abhilash K V
• [PATCH v2 1/3] AM35x: voltage: Basic initialization   Abhilash K V
• [PATCH v2 2/3] OMAP3: Add support for TPS65023 (AM35x only)   Abhilash K V
• [PATCH v2 3/3] OMAP3: Remove auto-selection of PMICs   Abhilash K V
• [RFC 7/7] iommu/core: split mapping to page sizes as supported by the hardware   KyongHo Cho
• Tasks schedule/migration issue with CPU hotplug?   Peter Zijlstra
• [PATCH v11 0/4] Consolidating GIC per-cpu interrupts   Thomas Gleixner
• [GIT PULL] DaVinci fixes for v3.1-rc6   Karicheri, Muralidharan
• [PATCH 0/8] OMAP3EVM: Add tvp514x video decoder support   Deepthy Ravi
• [PATCH 1/8] omap3evm: Enable regulators for camera interface   Deepthy Ravi
• [PATCH 2/8] omap3evm: Add Camera board init/hookup file   Deepthy Ravi
• [PATCH 3/8] tvp514x: Migrate to media-controller framework   Deepthy Ravi
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Deepthy Ravi
• [PATCH 5/8] ispccdc: Configure CCDC registers   Deepthy Ravi
• [PATCH 6/8] ispccdc: Add support for BT656 interface   Deepthy Ravi
• [PATCH 7/8] omap3evm: camera: Configure BT656 interface   Deepthy Ravi
• [PATCH 8/8] omap2plus_defconfig: Enable tvp514x video decoder support   Deepthy Ravi
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Kevin Hilman
• [RFC 7/7] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [RFC PATCH 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Arnd Bergmann
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Arnd Bergmann
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Arnd Bergmann
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Arnd Bergmann
• [PATCH v3] net/smsc911x: add device tree probe support   Dave Martin
• [PATCH] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• [alsa-devel] [PATCH] ASoC: omap: convert per-board modules to platform drivers   Lars-Peter Clausen
• [GIT PULL v3] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc   Arnd Bergmann
• [GIT PULL] i.MX features for next   Arnd Bergmann
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Cousson, Benoit
• [alsa-devel] [PATCH] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Arnd Bergmann
• [PATCH v2 0/3] ARM: iwmmxt/pj4 fixes for v7/Thumb-2   Dave Martin
• [PATCH v2 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Dave Martin
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Dave Martin
• [PATCH v2 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Dave Martin
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Santosh
• [PATCH v11 0/4] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Arnd Bergmann
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Russell King - ARM Linux
• [PATCH 1/4] ARM: mx53: Add pads for flexcan pins   Rogerio Pimentel
• [PATCH] ARM: supply a DTB file to be appended   Grant Likely
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Dmitry Torokhov
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [alsa-devel] [PATCH] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Laura Abbott
• [PATCH v2 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Arnd Bergmann
• [PATCH v2 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Arnd Bergmann
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Arnd Bergmann
• [PATCH] ARM: supply a DTB file to be appended   Nicolas Pitre
• [PATCH 1/8] omap3evm: Enable regulators for camera interface   Laurent Pinchart
• [RFC PATCH 0/3] Per SoC descriptor   Marc Zyngier
• [RFC PATCH 1/3] ARM: SoC: Introduce per SoC descriptor   Marc Zyngier
• [RFC PATCH 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [RFC PATCH 3/3] ARM: SoC: convert VExpress/RealView to SoC descriptor   Marc Zyngier
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Eric Miao
• [PATCH v2 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Nicolas Pitre
• [PATCH v2 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Eric Miao
• [PATCH v2 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Eric Miao
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Lorenzo Pieralisi
• [PATCH v2 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Nicolas Pitre
• [PATCH 2/8] omap3evm: Add Camera board init/hookup file   Laurent Pinchart
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Jon Medhurst (Tixy)
• [PATCH v2 1/3] ARM: iwmmxt: Fix Makefile rules for building iwmmxt for Thumb-2   Dave Martin
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Eric Miao
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Dave Martin
• [PATCH 3/8] tvp514x: Migrate to media-controller framework   Laurent Pinchart
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Laurent Pinchart
• [PATCH v2 3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2   Dave Martin
• [PATCH 5/8] ispccdc: Configure CCDC registers   Laurent Pinchart
• [PATCH 6/8] ispccdc: Add support for BT656 interface   Laurent Pinchart
• [PATCH 7/8] ARM: integrate CMA with DMA-mapping subsystem   Mike Frysinger
• [RFC PATCH v2 5/6] TI81XX: Add minimal hwmod data   Kevin Hilman
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Nicolas Pitre
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Nicolas Pitre
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• [alsa-devel] [PATCH] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• [GIT PULL v3] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc   Nicolas Pitre
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Kevin Hilman
• [PATCH 25/25] OMAP3: CPUidle: Make use of CPU PM notifiers   Kevin Hilman
• [RFC PATCH 01/10] OMAP2+: l3-noc: Add support for device-tree   Grant Likely
• [PATCH 3.1-rc1] ARM: entry: fix wrong parameter used in do_thumb_abort   Janusz Krzysztofik
• [RFC PATCH 02/10] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Grant Likely
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Colin Cross
• [PATCH v11 0/4] Consolidating GIC per-cpu interrupts   Thomas Gleixner
• [PATCH 2/8] mm: alloc_contig_freed_pages() added   Dave Hansen
• [RFC PATCH 03/10] documentation/dt: Add l3-noc bindings   Grant Likely
• [PATCH 08/25] OMAP4: PM: Keep static dep between MPUSS-EMIF and MPUSS-L3 and DUCATI-L3   Kevin Hilman
• [RFC PATCH 04/10] arm/dts: OMAP4: Add mpu, dsp and iva nodes   Grant Likely
• [RFC PATCH 05/10] documentation/dt: Add mpu, dsp and iva bindings   Grant Likely
• [RFC PATCH 07/10] documentation/dt: Add spinlock bindings   Grant Likely
• [RFC PATCH 08/10] gpio/omap: Adapt GPIO driver to DT   Grant Likely
• [RFC PATCH 09/10] arm/dts: OMAP4: Add gpio nodes   Grant Likely
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Jassi Brar
• [GIT PULL] i.MX features for next   Nicolas Pitre
• [RFC PATCH 10/10] documentation/dt: Add OMAP GPIO properties   Grant Likely
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Kevin Hilman
• [PATCH v3] net/smsc911x: add device tree probe support   Grant Likely
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Jassi Brar
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Linus Walleij
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Eric Miao
• [PATCH 05/25] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit   Jean Pihet
• [PATCH 11/25] OMAP: Add Secure HAL and monitor mode API infrastructure.   Jean Pihet
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• [PATCH 1/4] ARM: mx53: Add pads for flexcan pins   Uwe Kleine-König
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Jean Pihet
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Jassi Brar
• [PATCH 12/25] OMAP: Add support to allocate the memory for secure RAM   Jean Pihet
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Nicolas Pitre
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Jean Pihet
• [PATCH 0/7] S3C2443/S3C2416: Implement support for ADC   Heiko Stübner
• [PATCH 1/7] S3C2443/S3C2416: Add adc registers   Heiko Stübner
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Heiko Stübner
• [PATCH 3/7] s3c-adc: Replace TYPE_ADCVx conditionals with quirks   Heiko Stübner
• [PATCH 4/7] s3c-adc: Fix mux bit modification in s3c_adc_select   Heiko Stübner
• [PATCH 5/7] S3C24XX: Allow overriding of adc device name   Heiko Stübner
• [PATCH 6/7] s3c-adc: Add support for S3C2443   Heiko Stübner
• [PATCH 7/7] s3c-adc: Add support for S3C2416/S3C2450   Heiko Stübner
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Arnd Bergmann
• [PATCH 2/4 v2] mach-integrator: clockevent supports oneshot mode   Linus Walleij
• [PATCH 3/4 v2] mach-integrator: modernize clock event registration   Linus Walleij
• [PATCH 4/4 v2] mach-integrator: get timer frequency from clock   Linus Walleij
• [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Jean Pihet
• [PATCH 3/4] mach-integrator: modernize clock event registration   Linus Walleij
• [RFC PATCH 0/3] Per SoC descriptor   Arnd Bergmann
• [RFC PATCH 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Arnd Bergmann
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Arnd Bergmann
• [RFC] Kbuild: allow code re-use across different directories   Nicolas Pitre
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Kevin Hilman
• [RFC PATCH 0/3] Per SoC descriptor   Nicolas Pitre
• [PATCH v15 00/12] OMAP: dmtimer: adaptation to platform_driver   Tarun Kanti DebBarma
• [PATCH v15 01/12] OMAP2+: dmtimer: add device names to flck nodes   Tarun Kanti DebBarma
• [PATCH v15 02/12] OMAP4: hwmod data: add dmtimer version information   Tarun Kanti DebBarma
• [PATCH v15 03/12] OMAP1: dmtimer: conversion to platform devices   Tarun Kanti DebBarma
• [PATCH v15 04/12] OMAP2+: dmtimer: convert to platform devices   Tarun Kanti DebBarma
• [PATCH v15 05/12] OMAP: dmtimer: platform driver   Tarun Kanti DebBarma
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   Tarun Kanti DebBarma
• [PATCH v15 07/12] OMAP: dmtimer: pm_runtime support   Tarun Kanti DebBarma
• [PATCH v15 08/12] OMAP: dmtimer: add timeout to low-level routines   Tarun Kanti DebBarma
• [PATCH v15 09/12] OMAP: dmtimer: mark clocksource and clockevent timers reserved   Tarun Kanti DebBarma
• [PATCH v15 10/12] OMAP: dmtimer: low-power mode support   Tarun Kanti DebBarma
• [PATCH v15 11/12] OMAP: dmtimer: extend spinlock to exported APIs   Tarun Kanti DebBarma
• [PATCH v15 12/12] OMAP: dmtimer: add error handling to export APIs   Tarun Kanti DebBarma
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Sakari Ailus
• [PATCH v3 1/1] ASoC: mxs-saif: add record function   Wolfram Sang
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH] ARM: supply a DTB file to be appended   Linus Walleij
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH 16/18] dmaengine/ambhe rest oa-pl08x: Add support for sg len greater than one for slave transfers   Vinod Koul
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Thomas Gleixner
• [RFC PATCH 01/10] OMAP2+: l3-noc: Add support for device-tree   Cousson, Benoit
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Russell King - ARM Linux
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Mark Salter
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Russell King - ARM Linux
• [PATCH] ARM: imx: move pwm driver to use platform device id table   Eric Miao
• [RFC PATCH 01/10] OMAP2+: l3-noc: Add support for device-tree   Grant Likely
• [PATCH v4 04/11] OMAP2+: UART: Remove uart clock handling code from serial.c   Kevin Hilman
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [RFC PATCH 02/10] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Cousson, Benoit
• [RFC PATCH 03/10] documentation/dt: Add l3-noc bindings   Cousson, Benoit
• [PATCH v4 07/11] Serial: OMAP: Add runtime pm support for omap-serial driver   Kevin Hilman
• [RFC PATCH 05/10] documentation/dt: Add mpu, dsp and iva bindings   Cousson, Benoit
• [RFC PATCH 07/10] documentation/dt: Add spinlock bindings   Cousson, Benoit
• [PATCH] ARM: imx: move pwm driver to use platform device id table   Fabio Estevam
• [PATCH] ARM: imx: move pwm driver to use platform device id table   Eric Miao
• [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
• [PATCH] ARM: imx: move pwm driver to use platform device id table   Fabio Estevam
• [RFC PATCH 08/10] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [RFC PATCH 10/10] documentation/dt: Add OMAP GPIO properties   Cousson, Benoit
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [RFC PATCH 05/10] documentation/dt: Add mpu, dsp and iva bindings   Grant Likely
• [RFC PATCH 02/10] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Grant Likely
• [RFC PATCH v2 5/6] TI81XX: Add minimal hwmod data   Pedanekar, Hemant
• [PATCH] ARM: imx: move pwm driver to use platform device id table   Eric Miao
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH 3/4] ARM: pxa: add irq ack for gpio irq   Eric Miao
• [PATCH 1/4] ARM: mmp: add irq_disable callback for gpio chip   Eric Miao
• [PATCH 4/4] ARM: pxa: update gpio number to 192   Eric Miao
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Santosh
• [PATCH 1/4] ARM: mmp: add irq_disable callback for gpio chip   Chao Xie
• [PATCH 2/4] ARM: mmp: add irq_disable callback for icu chip   Chao Xie
• [PATCH 3/4] ARM: pxa: add irq ack for gpio irq   Chao Xie
• [PATCH 4/4] ARM: pxa: update gpio number to 192   Chao Xie
• [PATCH 25/25] OMAP3: CPUidle: Make use of CPU PM notifiers   Santosh
• [PATCH 08/25] OMAP4: PM: Keep static dep between MPUSS-EMIF and MPUSS-L3 and DUCATI-L3   Santosh
• [PATCH 11/25] OMAP: Add Secure HAL and monitor mode API infrastructure.   Santosh
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Santosh
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH] ARM: supply a DTB file to be appended   Rob Herring
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Rob Herring
• [PATCH v4 04/11] OMAP2+: UART: Remove uart clock handling code from serial.c   Govindraj
• [PATCH 1/4] ARM: mmp: add irq_disable callback for gpio chip   Chao Xie
• [PATCH v2 2/5] cpu_pm: call notifiers during suspend   Santosh
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Barry Song
• [PATCH v4 07/11] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH 25/25] OMAP3: CPUidle: Make use of CPU PM notifiers   Santosh
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Uwe Kleine-König
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Thomas Gleixner
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH 36/62] i2c: irq: Remove IRQF_DISABLED   Wolfram Sang
• [PATCH v3 1/4] ARM: i.MX5/mm: Consolidate arch/arm/mach-mx5/mm-*.c   Uwe Kleine-König
• [PATCH 58/62] watchdog: irq: Remove IRQF_DISABLED   Wolfram Sang
• [PATCH] arm/dt: Add SoC detection macros   Allen Martin
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shawn Guo
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Santosh
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Russell King - ARM Linux
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Thomas Gleixner
• [PATCH v3 3/4] ARM: i.MX5/mm: add the TZIC mapping resource   Uwe Kleine-König
• [PATCH v3 4/4] ARM: i.MX5/mm: consolidate TZIC map code   Uwe Kleine-König
• [PATCH] irq: Add IRQCHIP_SKIP_SET_WAKE flag to avoid need of dummy set_wake() handler.   Santosh Shilimkar
• [PATCH v11 0/4] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Jassi Brar
• [PATCH v3] net/smsc911x: add device tree probe support   Dave Martin
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH v4 0/3] consolidate and clean up the arch/arm/mach-mx5/mm-*.c   Jason Liu
• [PATCH v4 1/3] ARM: i.MX5/mm: Consolidate arch/arm/mach-mx5/mm-*.c   Jason Liu
• [PATCH v4 2/3] ARM: i.MX5/mm: Remove MX51_DEBUG related mapping   Jason Liu
• [PATCH v4 3/3] ARM: i.MX5/mm: consolidate TZIC map code   Jason Liu
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Russell King - ARM Linux
• [PATCH 12/25] OMAP: Add support to allocate the memory for secure RAM   Santosh
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Jon Medhurst (Tixy)
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Santosh
• [PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Nicolas Ferre
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Shawn Guo
• [PATCH REPOST 2/2] i2c-imx: add device tree probe support   Lothar Waßmann
• [PATCH v3] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• [PATCH v3] net/smsc911x: add device tree probe support   Shawn Guo
• at91 next tree   Nicolas Ferre
• [RFC] Kbuild: allow code re-use across different directories   Michal Marek
• [RFC] Kbuild: allow code re-use across different directories   Michal Marek
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [GIT PULL] at91: changes for next   Nicolas Ferre
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH 12/25] OMAP: Add support to allocate the memory for secure RAM   Jean Pihet
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Arnd Bergmann
• [PATCH v3] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Nicolas Pitre
• [PATCH v3 1/1] ASoC: mxs-saif: add record function   Wolfram Sang
• [PATCH v2 1/3] ARM: mx28evk: add platform data for saif   Wolfram Sang
• [PATCH v2 3/3] arm: mxs: disable clock-gates when setting saif-clocks   Wolfram Sang
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Jon Medhurst (Tixy)
• [PATCH 12/25] OMAP: Add support to allocate the memory for secure RAM   Shilimkar, Santosh
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shilimkar, Santosh
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shawn Guo
• [PATCH 10/24] C6X: time management   Thomas Gleixner
• [PATCH 1/2] Adding platform level cpuidle driver for i.MX SoCs.   Shawn Guo
• [PATCH 11/24] C6X: interrupt handling   Thomas Gleixner
• [RFC PATCH v2 0/3] Per SoC descriptor   Marc Zyngier
• [RFC PATCH v2 1/3] ARM: SoC: Introduce per SoC descriptor   Marc Zyngier
• [RFC PATCH v2 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [RFC PATCH v2 3/3] ARM: SoC: convert VExpress/RealView to SoC descriptor   Marc Zyngier
• [RFC PATCH v2 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Santosh
• [RFC PATCH v2 3/3] ARM: SoC: convert VExpress/RealView to SoC descriptor   Arnd Bergmann
• [RFC PATCH v2 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Arnd Bergmann
• [RFC PATCH v2 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [RFC PATCH v2 3/3] ARM: SoC: convert VExpress/RealView to SoC descriptor   Marc Zyngier
• [PATCH 0/5] Convert ARM subarchitectures to generic wfi macro.   Nick Bowler
• [PATCH 1/5] ARM: realview: Use wfi macro in platform_do_lowpower.   Nick Bowler
• [PATCH 2/5] ARM: exynos4: Use wfi macro in platform_do_lowpower.   Nick Bowler
• [PATCH 3/5] ARM: shmobile: Use wfi macro in platform_cpu_die.   Nick Bowler
• [PATCH 4/5] ARM: tegra: Use wfi macro in platform_do_lowpower.   Nick Bowler
• [PATCH 5/5] ARM: omap4: Kill private do_wfi macro.   Nick Bowler
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shawn Guo
• [PATCH 0/5] Convert ARM subarchitectures to generic wfi macro.   Nick Bowler
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [PATCH v3] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Dave Martin
• [PATCH] arm/dt: Add SoC detection macros   Olof Johansson
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Santosh
• [PATCH 5/5] ARM: omap4: Kill private do_wfi macro.   Santosh
• [RFC PATCH v2 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Santosh
• [RFC PATCH v2 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Santosh
• [PATCH 5/5] ARM: omap4: Kill private do_wfi macro.   Nick Bowler
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Tony Lindgren
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Nicolas Pitre
• [PATCH V4 RESEND 1/6] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata   Ajay Kumar
• [PATCH v2 0/5] CPU PM notifiers   Kevin Hilman
• [PATCH V4 0/6] ARM: S5P64X0: Add Framebuffer support   Ajay Kumar
• [PATCH V4 RESEND 1/6] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata   Ajay Kumar
• [PATCH V4 RESEND 2/6] ARM: S5P64X0: Add register base and IRQ for Framebuffer   Ajay Kumar
• [PATCH V4 RESEND 3/6] ARM: S5P64X0: Set s3c_device_fb name   Ajay Kumar
• [PATCH V4 4/6] ARM: S5P64X0: Add GPIO setup for LCD   Ajay Kumar
• [PATCH V4 5/6] ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer support   Ajay Kumar
• [PATCH V4 6/6] ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer support   Ajay Kumar
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   Kevin Hilman
• [PATCH v4 07/11] Serial: OMAP: Add runtime pm support for omap-serial driver   Kevin Hilman
• [RFC PATCH v2 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Nicolas Pitre
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Kevin Hilman
• [PATCH 6/6] arm/imx6q: add suspend/resume support   Russell King - ARM Linux
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH v4 09/11] OMAP2+: Serial: Use prepare and resume calls to gate uart clocks   Kevin Hilman
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Russell King - ARM Linux
• [PATCH 0/5] Convert ARM subarchitectures to generic wfi macro.   Russell King - ARM Linux
• [PATCH v3] ASoC: omap: convert per-board modules to platform drivers   Russell King - ARM Linux
• [PATCH v4 10/11] OMAP: Serial: Allow UART parameters to be configured from board file.   Kevin Hilman
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [PATCHv2] ARM: remove missing cns3xxx includes   Anton Vorontsov
• [GIT PULL] ARM: Cavium CNS3xxx updates for 3.1   Anton Vorontsov
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
• [PATCH v2 1/4] ARM: mx53: Add pads for flexcan pins   Rogerio Pimentel
• [PATCH v2 2/4] ARM: mx53: Add clock for flexcan   Rogerio Pimentel
• [PATCH v2 3/4] ARM: mx53: Add resources for flexcan   Rogerio Pimentel
• [PATCH v2 4/4] ARM: mx53_ard: Add flexcan support   Rogerio Pimentel
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Russell King - ARM Linux
• [PATCH v6 17/25] gpio/omap: use pm-runtime framework   Kevin Hilman
• [PATCH 09/22] OMAP2: add voltage domains and connect to powerdomains   Kevin Hilman
• [PATCH 09/22] OMAP2: add voltage domains and connect to powerdomains   Kevin Hilman
• [PATCH 11/22] OMAP4: powerdomain data: add voltage domains   Kevin Hilman
• [PATCH 14/22] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer   Kevin Hilman
• [PATCH 13/22] OMAP2+: voltage: keep track of powerdomains in each voltagedomain   Kevin Hilman
• [PATCH v2 1/5] cpu_pm: Add cpu power management notifiers   Andrew Morton
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shawn Guo
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH 1/2 v2] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH 2/2 v2] power: bq20z75: Add Device Tree Binding   Rhyland Klein
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shilimkar, Santosh
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shilimkar, Santosh
• [PATCH v2 1/5] cpu_pm: Add cpu power management notifiers   Santosh
• [PATCH] ARM: make cpu_is_v6_unaliagned() independent of CONFIG_PROC_FS   Eric Miao
• [PATCH v2] ARM: make cpu_is_v6_unaligned() and safe_usermode() independent of CONFIG_PROC_FS   eric.miao at linaro.org
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shawn Guo
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Santosh
• [PATCH v2 0/5] CPU PM notifiers   Santosh
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH v2 1/5] cpu_pm: Add cpu power management notifiers   Santosh
• [PATCH] arm: mx28: fix bit operation in clock setting   Wolfram Sang
• [PATCH] arm: mx28: check for gated clocks when setting saif divider   Wolfram Sang
• [PATCH v2 00/10] ARM: kprobes: Add test code to kernel tree   Tixy
• [PATCH v2 01/10] ARM: kprobes: Add config option for selecting the ARM kprobes tests   Tixy
• [PATCH v2 02/10] ARM: kprobes: Add basic API tests   Tixy
• [PATCH v2 03/10] ARM: kprobes: Framework for instruction set test cases   Tixy
• [PATCH v2 04/10] ARM: kprobes: Add Thumb instruction simulation test cases   Tixy
• [PATCH v2 05/10] ARM: kprobes: Add ARM instruction simulation test cases   Tixy
• [PATCH v2 06/10] ARM: kprobes: Add exports for test code   Tixy
• [PATCH v2 07/10] ARM: kprobes: Add decoding table self-consistency tests   Tixy
• [PATCH v2 08/10] ARM: kprobes: Add decoding table test coverage analysis   Tixy
• [PATCH v2 09/10] ARM: kprobes: Add some benchmarking to test module   Tixy
• [PATCH v2 10/10] ARM: kprobes: Add introductory comment to test code   Tixy
• [PATCH] Add platform driver support to the CS890x driver   Jaccon Bastiaansen
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Thomas Hellstrom
• [PATCH v2 1/3] ARM: mx28evk: add platform data for saif   Uwe Kleine-König
• [PATCH] Add platform driver support to the CS890x driver   Uwe Kleine-König
• [PATCH] ARM: make cpu_is_v6_unaliagned() independent of CONFIG_PROC_FS   Nicolas Pitre
• [PATCH v2] ARM: make cpu_is_v6_unaligned() and safe_usermode() independent of CONFIG_PROC_FS   Nicolas Pitre
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Shawn Guo
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Rob Clark
• [GIT PULL] ARM: Cavium CNS3xxx updates for 3.1   Arnd Bergmann
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Arnd Bergmann
• [GIT PULL] at91: changes for next   Arnd Bergmann
• [GIT PULL] i.MX features for next   Arnd Bergmann
• [GIT PULL v3] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc   Arnd Bergmann
• [GIT PULL] DaVinci fixes for v3.1-rc6   Arnd Bergmann
• [GIT PULL] CPU mapping platform updates for 3.2   Arnd Bergmann
• [GIT PULL] msm: initial devicetree support   Arnd Bergmann
• [PATCH v2] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [GIT PULL] CSR prima2 changes for next   Barry Song
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Barry Song
• at91 next tree   Stephen Rothwell
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   Russell King - ARM Linux
• [PATCH 0/7] ASoC: ep93xx: convert to use snd_soc_register_card()   Mika Westerberg
• [PATCH 1/7] ASoC: ep93xx-pcm: add MODULE_ALIAS   Mika Westerberg
• [PATCH 2/7] ASoC: simone: convert to use snd_soc_register_card()   Mika Westerberg
• [PATCH 3/7] ASoC: edb93xx: convert to use snd_soc_register_card()   Mika Westerberg
• [PATCH 4/7] ASoC: snappercl15: convert to use snd_soc_register_card()   Mika Westerberg
• [PATCH 5/7] ARM: ep93xx: simone: register audio platform device   Mika Westerberg
• [PATCH 6/7] ARM: ep93xx: edb93xx: register audio platform device   Mika Westerberg
• [PATCH 7/7] ARM: ep93xx: snappercl15: register audio platform device   Mika Westerberg
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Artem Bityutskiy
• temporary move of linux-arm-soc.git to git.linaro.org   Arnd Bergmann
• [PATCH v4] ASoC: omap: convert per-board modules to platform drivers   Mans Rullgard
• temporary move of linux-arm-soc.git to git.linaro.org   Stephen Rothwell
• [PATCH v4] mach-realview: expose PB1176 ROM using physmap and map_rom   Artem Bityutskiy
• [PATCH] mtd: drop Integrator flash map Kconfig   Artem Bityutskiy
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH] Add platform driver support to the CS890x driver   Jaccon Bastiaansen
• [PATCH] Add platform driver support to the CS890x driver   Uwe Kleine-König
• [PATCH v4] mach-realview: expose PB1176 ROM using physmap and map_rom   Linus Walleij
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Thomas Hellstrom
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Linus Walleij
• [PATCH 36/62] i2c: irq: Remove IRQF_DISABLED   Linus Walleij
• [PATCH 58/62] watchdog: irq: Remove IRQF_DISABLED   Linus Walleij
• [PATCH 33/62] dmaengine: irq: Remove IRQF_DISABLED   Linus Walleij
• [PATCH 52/62] rtc: irq: Remove IRQF_DISABLED   Linus Walleij
• [PATCH 0/7] ASoC: ep93xx: convert to use snd_soc_register_card()   Ryan Mallon
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [RFC 1/2] virtio: Add AMBA bus driver for virtio device   Rusty Russell
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH v2 09/10] ARM: kprobes: Add some benchmarking to test module   Nicolas Pitre
• [PATCH v2 03/10] ARM: kprobes: Framework for instruction set test cases   Nicolas Pitre
• [PATCH v2 00/10] ARM: kprobes: Add test code to kernel tree   Nicolas Pitre
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v2 1/5] cpu_pm: Add cpu power management notifiers   Santosh
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Shawn Guo
• [PATCH v2 0/2] make reinitialization of ARM core components possible   Shawn Guo
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Thomas Hellstrom
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH v4 10/11] OMAP: Serial: Allow UART parameters to be configured from board file.   Govindraj
• [PATCH v4 09/11] OMAP2+: Serial: Use prepare and resume calls to gate uart clocks   Govindraj
• [PATCH v4 07/11] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v4 07/11] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v2 09/10] ARM: kprobes: Add some benchmarking to test module   Tixy
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Uwe Kleine-König
• [PATCH v2 09/10] ARM: kprobes: Add some benchmarking to test module   Russell King - ARM Linux
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Thomas Gleixner
• [PATCH] mmc: omap_hsmmc: DMA unmap only once in case of MMC error   Per Forlin
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Sascha Hauer
• [GIT PULL] at91: changes for next   Nicolas Ferre
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Sascha Hauer
• OMAP3503, SMC911x: mac address issue   A.Schallenberg
• [PATCH 1/2] Adding platform level cpuidle driver for i.MX SoCs.   Sascha Hauer
• [PATCH 0/7] ASoC: ep93xx: convert to use snd_soc_register_card()   Mark Brown
• OMAP3503, SMC911x: mac address issue   Russell King - ARM Linux
• [RFC PATCH 5/5] ARM: entry: Fix Thumb-2 undef handling for multi-CPU kernels   Dave Martin
• [PATCH] Add platform driver support to the CS890x driver   Jaccon Bastiaansen
• [RFC PATCH v3 0/3] Per SoC descriptor   Marc Zyngier
• [RFC PATCH v3 1/3] ARM: SoC: Introduce per SoC descriptor   Marc Zyngier
• [RFC PATCH v3 2/3] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [RFC PATCH v3 3/3] ARM: SoC: convert VExpress/RealView to SoC descriptor   Marc Zyngier
• [PATCH v4] ASoC: omap: convert per-board modules to platform drivers   Mark Brown
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH 1/2] Adding platform level cpuidle driver for i.MX SoCs.   Shawn Guo
• [PATCH] Add platform driver support to the CS890x driver   Uwe Kleine-König
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Uwe Kleine-König
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Arnd Bergmann
• [RESEND][PATCH] pxa/hx4700: add platform device and I2C info for AK4641 codec   Dmitry Artamonow
• [PATCH 1/2] mmc: core: clarify how to use post_req in case of errors   Linus Walleij
• [PATCH 2/2] mmc: mmci: simplify err check in mmci_post_request   Linus Walleij
• [PATCH 10/24] C6X: time management   Mark Salter
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Russell King - ARM Linux
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [RFC PATCH 06/10] hwspinlock: OMAP4: Add spinlock support in DT   Arnd Bergmann
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Dave Martin
• [PATCH v2] ARM: make cpu_is_v6_unaligned() and safe_usermode() independent of CONFIG_PROC_FS   Dave Martin
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Russell King - ARM Linux
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Nicolas Pitre
• [GIT PULL] CSR prima2 changes for next   Arnd Bergmann
• [GIT PULL] CSR prima2 changes for next   Barry Song
• [PATCH 0/7] ASoC: ep93xx: convert to use snd_soc_register_card()   Mika Westerberg
• [PATCH 1/3] iommu/core: add fault reporting mechanism   Roedel, Joerg
• [GIT PULL] arm-soc fixes for 3.1   Arnd Bergmann
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH 1/3] iommu/core: add fault reporting mechanism   Ohad Ben-Cohen
• [PATCH v2 2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2   Dave Martin
• [PATCH v6 00/25] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [RFC 1/2] virtio: Add AMBA bus driver for virtio device   Pawel Moll
• [PATCH 00/10] hwspinlock-next   Ohad Ben-Cohen
• [PATCH 01/10] hwspinlock/core: simplify Kconfig   Ohad Ben-Cohen
• [PATCH 02/10] hwspinlock/core: simplify 'owner' handling   Ohad Ben-Cohen
• [PATCH 03/10] hwspinlock/omap: simplify allocation scheme   Ohad Ben-Cohen
• [PATCH 04/10] hwspinlock/core/omap: fix id issues on multiple hwspinlock devices   Ohad Ben-Cohen
• [PATCH 05/10] hwspinlock/core: use a mutex to protect the radix tree   Ohad Ben-Cohen
• [PATCH 06/10] hwspinlock/core: remove stubs for register/unregister   Ohad Ben-Cohen
• [PATCH 07/10] hwspinlock/core: register a bank of hwspinlocks in a single API call   Ohad Ben-Cohen
• [PATCH 08/10] hwspinlock/u8500: add hwspinlock driver   Ohad Ben-Cohen
• [PATCH 09/10] hwspinlock/omap: omap_hwspinlock_remove should be __devexit   Ohad Ben-Cohen
• [PATCH 10/10] hwspinlock: add MAINTAINERS entries   Ohad Ben-Cohen
• [PATCH] ARM: tegra: Remove redundant change to the CPSR in headsmp.S   Dave Martin
• [PATCH 10/10] hwspinlock: add MAINTAINERS entries   Joe Perches
• [PATCH v4 07/11] Serial: OMAP: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH 10/10] hwspinlock: add MAINTAINERS entries   Ohad Ben-Cohen
• [RFC v2] arm: Add platform bus driver for virtio device   Anthony Liguori
• [GIT PULL] I2C: OMAP: misc. cleanup for v3.2   Kevin Hilman
• [PATCH] OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers   Kevin Hilman
• [PATCH v3 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v3 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH v3 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH v3 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v3 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v3 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH v3 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [GIT PULL] arm-soc fixes for 3.1   Arnd Bergmann
• [PATCH 21/25] OMAP4: PM: Add MPUSS power domain OSWR support   Kevin Hilman
• [PATCH v3 1/6] DMA: PL330: move filter function into driver   Jassi Brar
• [PATCH v3 4/6] DMA: PL330: Add device tree support   Jassi Brar
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Grant Likely
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Grant Likely
• [PATCH 06/24] C6X: devicetree   Grant Likely
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Arnd Bergmann
• [PATCH 0/7] ASoC: ep93xx: convert to use snd_soc_register_card()   H Hartley Sweeten
• [PATCH 2/2 v2] power: bq20z75: Add Device Tree Binding   Grant Likely
• [PATCH 1/2 v2] power: bq20z75: devicetree init support   Grant Likely
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Grant Likely
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Kevin Hilman
• [PATCH 16/25] OMAP4: PM: Program CPU1 to hit OFF when off-lined   Kevin Hilman
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH 10/24] C6X: time management   john stultz
• [RFC PATCH] genirq: set pending flag for disabled level interrupt   Abhijeet Dharmapurikar
• [RFC 1/2] virtio: Add AMBA bus driver for virtio device   Rusty Russell
• [PATCH v3 0/2] Add device tree support for Samsung's I2C driver   Thomas Abraham
• [PATCH v3 1/2] i2c: s3c2410: Keep a copy of platform data and use it   Thomas Abraham
• [PATCH v3 2/2] i2c: s3c2410: Add device tree support   Thomas Abraham
• [Android-virt] KVM ARM interrupt virtualization   bill4carson
• [PATCH 16/25] OMAP4: PM: Program CPU1 to hit OFF when off-lined   Santosh
• [PATCH 21/25] OMAP4: PM: Add MPUSS power domain OSWR support   Santosh
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Santosh
• [PATCH v2 1/5] cpu_pm: Add cpu power management notifiers   Santosh
• [[PATCH v2] mtd: check parts pointer before using it   Jason Liu
• [PATCH] ARM: CACHE-L2X0: filter start address can be 0 and is often 0   Barry Song
• [[PATCH v2] mtd: check parts pointer before using it   Artem Bityutskiy
• [[PATCH v2] mtd: check parts pointer before using it   Jason Liu
• [PATCH v3 1/2] i2c: s3c2410: Keep a copy of platform data and use it   Stephen Boyd
• [PATCH 1/8] omap3evm: Enable regulators for camera interface   Ravi, Deepthy
• [PATCH 21/25] OMAP4: PM: Add MPUSS power domain OSWR support   Jean Pihet
• [Android-virt] KVM ARM interrupt virtualization   Peter Maydell
• [PATCH] Add platform driver support to the CS890x driver   Sascha Hauer
• [PATCH] Add platform driver support to the CS890x driver   Uwe Kleine-König
• [PATCH 21/25] OMAP4: PM: Add MPUSS power domain OSWR support   Santosh
• [RFC v2] arm: Add platform bus driver for virtio device   Pawel Moll
• [PATCH] ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII   Barry Song
• [PATCH 1/4 v6] drivers: create a pin control subsystem v6   Linus Walleij
• [RFC 1/2] virtio: Add AMBA bus driver for virtio device   Pawel Moll
• [Android-virt] KVM ARM interrupt virtualization   bill4carson
• [PATCH 1/3] iommu/core: add fault reporting mechanism   Roedel, Joerg
• [PATCH 0/3] ARCH: CSR: basic PM suspend/resume support   Barry Song
• [PATCH 1/3] ARM: CSR: PM: save/restore timer status in suspend cycles   Barry Song
• [PATCH 2/3] ARM: CSR: PM: save/restore irq status in suspend cycles   Barry Song
• [PATCH 3/3] ARM: CSR: PM: add sleep entry for SiRFprimaII   Barry Song
• [PATCH 3/3] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• Fwd: [PATCH] Fix build errors with gpio-generic.c   Russell King - ARM Linux
• [PATCH 1/3] iommu/core: add fault reporting mechanism   Ohad Ben-Cohen
• [PATCH 3/3] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH 3/3] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH 1/4] AM3517 : support for suspend/resume   Koyamangalath, Abhilash
• [PATCH v2 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH 3/3] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• Merging Cadence macb/gem patches   Jamie Iles
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v7 01/26] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
• [PATCH v7 02/26] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
• [PATCH v7 03/26] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
• [PATCH v7 04/26] gpio/omap: fix pwrdm_post_transition call sequence   Tarun Kanti DebBarma
• [PATCH v7 05/26] gpio/omap: handle save/restore context in GPIO driver   Tarun Kanti DebBarma
• [PATCH v7 06/26] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
• [PATCH v7 07/26] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
• [PATCH v7 08/26] gpio/omap: further cleanup using wkup_en register   Tarun Kanti DebBarma
• [PATCH v7 09/26] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
• [PATCH v7 10/26] gpio/omap: remove hardcoded offsets in context save/restore   Tarun Kanti DebBarma
• [PATCH v7 11/26] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
• [PATCH v7 12/26] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
• [PATCH v7 13/26] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
• [PATCH v7 14/26] gpio/omap: remove unnecessary bit-masking for read access   Tarun Kanti DebBarma
• [PATCH v7 15/26] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
• [PATCH v7 16/26] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
• [PATCH v7 17/26] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
• [PATCH v7 18/26] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
• [PATCH v7 19/26] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
• [PATCH v7 20/26] gpio/omap: skip operations in runtime callbacks   Tarun Kanti DebBarma
• [PATCH v7 21/26] gpio/omap: remove omap_gpio_save_context overhead   Tarun Kanti DebBarma
• [PATCH v7 22/26] gpio/omap: save and restore debounce registers   Tarun Kanti DebBarma
• [PATCH v7 23/26] gpio/omap: enable irq at the end of all configuration in restore   Tarun Kanti DebBarma
• [PATCH v7 24/26] gpio/omap: restore OE only after setting the output level   Tarun Kanti DebBarma
• [PATCH v7 25/26] gpio/omap: handle set_dataout reg capable IP on restore   Tarun Kanti DebBarma
• [PATCH v7 26/26] gpio/omap: add dbclk aliases for all gpio modules   Tarun Kanti DebBarma
• [PATCH 2/4 v6] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   amit kachhap
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Russell King - ARM Linux
• [PATCH] ARM: CACHE-L2X0: filter start address can be 0 and is often 0   Rob Herring
• Merging Cadence macb/gem patches   Arnd Bergmann
• [PATCH] ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII   Rob Herring
• [PATCH] ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII   Barry Song
• [PATCH] ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII   Rob Herring
• [PATCH 0/3] ARCH: CSR: basic PM suspend/resume support   Arnd Bergmann
• [PATCH] ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII   Arnd Bergmann
• Merging Cadence macb/gem patches   David Miller
• [RFC PATCH] mmc: sdio: rw extended, use a sg entry for each block   Nicolas Ferre
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Vincent Guittot
• [Question] RPC and SMD implementation   David Brown
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Kevin Hilman
• [PATCH 0/7] ASoC: ep93xx: convert to use snd_soc_register_card()   Mika Westerberg
• [ltt-dev] LTTng 2.0 on ARM   Rabin Vincent
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Russell King - ARM Linux
• [PATCH] ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII   Rob Herring
• [PATCH] OMAP3: PM: fix UART handling when using no_console_suspend   Kevin Hilman
• [PATCH 1/4] AM3517 : support for suspend/resume   Kevin Hilman
• [PATCH 01/11] clk: Add a generic clock infrastructure   Stephen Boyd
• [PATCH 02/11] clk: Implement clk_set_rate   Stephen Boyd
• [PATCH 04/11] clk: Add simple gated clock   Stephen Boyd
• [PATCH 05/11] clk: Prototype and document clk_register()   Stephen Boyd
• [PATCH 08/11] clk: Avoid clock name collisions   Stephen Boyd
• [PATCH v2 1/2] iommu/core: add fault reporting mechanism   Ohad Ben-Cohen
• [PATCH v2 2/2] iommu/omap: migrate to the generic fault report mechanism   Ohad Ben-Cohen
• [PATCH v2 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v2 2/6] iommu/omap: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v2 3/6] iommu/msm: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v2 4/6] iommu/amd: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v2 5/6] iommu/intel: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v2 6/6] iommu/core: remove the temporary register_iommu_pgsize API   Ohad Ben-Cohen
• [PATCH 01/25] ARM: mm: Add strongly ordered descriptor support.   Tony Lindgren
• [PATCH] ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded   Fabio Estevam
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Tony Lindgren
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Tony Lindgren
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Thomas Gleixner
• [RFC] Kbuild: allow code re-use across different directories   Arnaud Lacombe
• [PATCH 1/2 v3] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH 2/2 v3] power: bq20z75: Add Device Tree Binding   Rhyland Klein
• [PATCH 0/6] OMAP2+: id: cleanup for 3.2   Paul Walmsley
• [PATCH 1/6] OMAP3: id: remove identification codes that only correspond to marketing names   Paul Walmsley
• [PATCH 2/6] OMAP3: id: remove useless strcpy()s   Paul Walmsley
• [PATCH 3/6] OMAP3: id: use explicit omap_revision codes for 3505/3517 ES levels   Paul Walmsley
• [PATCH 4/6] OMAP3: id: add fallthrough warning; fix some CodingStyle issues   Paul Walmsley
• [PATCH 5/6] OMAP3: id: remove duplicate code for testing SoC ES level   Paul Walmsley
• [PATCH 6/6] OMAP2+: id: remove OMAP_REVBITS_* macros   Paul Walmsley
• [PATCH v2 5/6] iommu/intel: announce supported page sizes   David Woodhouse
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Russell King - ARM Linux
• [PATCH v15 11/12] OMAP: dmtimer: extend spinlock to exported APIs   Tony Lindgren
• [RFC 1/2] virtio: Add AMBA bus driver for virtio device   Rusty Russell
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Frank Rowand
• [PATCH 0/3] ARCH: CSR: basic PM suspend/resume support   Barry Song
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH] ARM: tegra: Remove redundant change to the CPSR in headsmp.S   Colin Cross
• [PATCH 2/4 v6] pinmux: add a driver for the U300 pinmux   Barry Song
• [RFC] Kbuild: allow code re-use across different directories   Michal Marek
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH 01/11] clk: Add a generic clock infrastructure   Saravana Kannan
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Rob Clark
• [PATCH] ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded   Fabio Estevam
• [PATCH] ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded   Shawn Guo
• [PATCH] ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded   Shawn Guo
• [PATCH] ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded   Shawn Guo
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v15 11/12] OMAP: dmtimer: extend spinlock to exported APIs   DebBarma, Tarun Kanti
• [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board   Kyungmin Park
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v2 5/6] iommu/intel: announce supported page sizes   Ohad Ben-Cohen
• [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support   Shilimkar, Santosh
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Shilimkar, Santosh
• [PATCH 01/25] ARM: mm: Add strongly ordered descriptor support.   Shilimkar, Santosh
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Shilimkar, Santosh
• [PATCH 0/6] zImage improvements with DTB append and ATAG compatibility   Nicolas Pitre
• [PATCH 1/6] ARM: zImage: ensure it is always a multiple of 64 bits in size   Nicolas Pitre
• [PATCH 2/6] ARM: zImage: Allow the appending of a device tree binary   Nicolas Pitre
• [PATCH 3/6] ARM: zImage: make sure appended DTB doesn't get overwritten by kernel .bss   Nicolas Pitre
• [PATCH 4/6] ARM: zImage: gather some string functions into string.c   Nicolas Pitre
• [PATCH 5/6] ARM: zImage: allow supplementing appended DTB with traditional ATAG data   Nicolas Pitre
• [PATCH 6/6] ARM: zImage: prevent constant copy+rebuild of lib1funcs.S   Nicolas Pitre
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Vinod Koul
• [PATCH] ARM: EXYNOS4: Enable double linefill in PL310 Prefetch Control Register   Kyungmin Park
• [PATCH] ARM: EXYNOS4: Enable double linefill in PL310 Prefetch Control Register   Santosh
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Jassi Brar
• [PATCH] ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII   Arnd Bergmann
• Fwd: Re: [PATCH v2 1/5] cpu_pm: Add cpu power management notifiers   Santosh
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Vincent Guittot
• [PATCH] ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded   Uwe Kleine-König
• [PATCH v2 0/2] Move sdhci-s3c platform helper into driver   Thomas Abraham
• [PATCH v2 1/2] mmc: sdhci-s3c: add default controller configuration   Thomas Abraham
• [PATCH v2 2/2] arm: samsung: remove sdhci default configuration setup platform helper   Thomas Abraham
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH] ARM: EXYNOS4: Enable double linefill in PL310 Prefetch Control Register   Siarhei Siamashka
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Thomas Hellstrom
• [PATCH] ARM: EXYNOS4: Enable double linefill in PL310 Prefetch Control Register   Kyungmin Park
• [PATCH] ARM: EXYNOS4: Enable double linefill in PL310 Prefetch Control Register   Siarhei Siamashka
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Santosh
• [PATCH 0/6] zImage improvements with DTB append and ATAG compatibility   Shawn Guo
• [PATCH] ARM: tegra: Remove redundant change to the CPSR in headsmp.S   Dave Martin
• [PATCH 01/11] clk: Add a generic clock infrastructure   Mark Brown
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Barry Song
• [ltt-dev] LTTng 2.0 on ARM   Dave Martin
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Santosh
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Vinod Koul
• [PATCH v7 14/26] gpio/omap: remove unnecessary bit-masking for read access   Sergei Shtylyov
• [PATCH] ARM: EXYNOS4: Enable double linefill in PL310 Prefetch Control Register   Kukjin Kim
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Kukjin Kim
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Jassi Brar
• [PATCH v2 1/6] OMAP3: id: remove identification codes that only correspond to marketing names   Paul Walmsley
• [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board   Kukjin Kim
• [PATCH] OMAP2+: hwmod: remove OMAP_CHIP*   Paul Walmsley
• [PATCH 3/6] OMAP3: id: use explicit omap_revision codes for 3505/3517 ES levels   Igor Grinberg
• [PATCH 6/6] OMAP2+: id: remove OMAP_REVBITS_* macros   Igor Grinberg
• [PATCH 6/6] OMAP2+: id: remove OMAP_REVBITS_* macros   Paul Walmsley
• [PATCH v2 0/6] OMAP2+: id: cleanup for 3.2   Paul Walmsley
• [PATCH v2 1/6] OMAP3: id: remove identification codes that only correspond to marketing names   Paul Walmsley
• [PATCH v2 2/6] OMAP3: id: remove useless strcpy()s   Paul Walmsley
• [PATCH v2 3/6] OMAP3: id: use explicit omap_revision codes for 3505/3517 ES levels   Paul Walmsley
• [PATCH v2 4/6] OMAP3: id: add fallthrough warning; fix some CodingStyle issues   Paul Walmsley
• [PATCH v2 5/6] OMAP3: id: remove duplicate code for testing SoC ES level   Paul Walmsley
• [PATCH v2 6/6] OMAP2+: id: remove OMAP_REVBITS_* macros   Paul Walmsley
• [PATCH 6/6] OMAP2+: id: remove OMAP_REVBITS_* macros   Igor Grinberg
• [PATCH 1/4] AM3517 : support for suspend/resume   Koyamangalath, Abhilash
• [PATCH] test patch for Igor   Paul Walmsley
• [PATCH V4 5/6] ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer support   Kukjin Kim
• [PATCH v7 14/26] gpio/omap: remove unnecessary bit-masking for read access   DebBarma, Tarun Kanti
• [PATCH 6/6] OMAP2+: id: remove OMAP_REVBITS_* macros   Paul Walmsley
• [PATCH 4/6] ARM: zImage: gather some string functions into string.c   Dave Martin
• [PATCH 0/6] zImage improvements with DTB append and ATAG compatibility   Dave Martin
• [PATCH v2] ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded   Fabio Estevam
• [PATCH] ARM: mach-mxs/mx28evk: Only register devices if their GPIO requests succeeded   Fabio Estevam
• [PATCH v15 11/12 REPOST] OMAP: dmtimer: extend spinlock in request functions   Tarun Kanti DebBarma
• [PATCH v15 12/12 REPOST] OMAP: dmtimer: add error handling to export APIs   Tarun Kanti DebBarma
• [PATCH 6/6] OMAP2+: id: remove OMAP_REVBITS_* macros   Igor Grinberg
• [PATCH 2/6] ARM: zImage: Allow the appending of a device tree binary   Dave Martin
• [PATCH 4/6] ARM: zImage: gather some string functions into string.c   Nicolas Pitre
• [PATCH v2] AM3517 : support for suspend/resume   Abhilash K V
• [PATCH 2/6] ARM: zImage: Allow the appending of a device tree binary   Nicolas Pitre
• [PATCH 2/6] ARM: zImage: Allow the appending of a device tree binary   Dave Martin
• [PATCH 4/6] ARM: zImage: gather some string functions into string.c   Dave Martin
• [PATCH 4/6] ARM: zImage: gather some string functions into string.c   Nicolas Pitre
• [PATCH 2/6] ARM: zImage: Allow the appending of a device tree binary   Nicolas Pitre
• [PATCH] ARM: rename temp variable in read*_relaxed()   Olof Johansson
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Tony Lindgren
• [PATCH 0/6] zImage improvements with DTB append and ATAG compatibility   Thomas Abraham
• [PATCH] ARM: rename temp variable in read*_relaxed()   Nicolas Pitre
• [PATCH] arm: omap: Fix build error in ispccdc.c   Roedel, Joerg
• [PATCH v2 2/2] iommu/omap: migrate to the generic fault report mechanism   Roedel, Joerg
• [PATCH V3 3/6] MTD : add the database for the NANDs   Brian Norris
• [PATCH] arm: omap: Fix build error in ispccdc.c   Laurent Pinchart
• [PATCH 1/2 v3] power: bq20z75: devicetree init support   Grant Likely
• [PATCH 2/2 v3] power: bq20z75: Add Device Tree Binding   Grant Likely
• [PATCH 2/6] ARM: zImage: Allow the appending of a device tree binary   Dave Martin
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Grant Likely
• [PATCH v3 4/6] DMA: PL330: Add device tree support   Grant Likely
• [PATCH v3 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Grant Likely
• [ltt-dev] LTTng 2.0 on ARM   Jon Medhurst (Tixy)
• [PATCH 0/5] GIC OF bindings   Rob Herring
• [PATCH 1/5] irq: add declaration of irq_domain_simple_ops to irqdomain.h   Rob Herring
• [PATCH 2/5] irq: fix existing domain check in irq_domain_add   Rob Herring
• [PATCH 3/5] of/irq: introduce of_irq_init   Rob Herring
• [PATCH 4/5] ARM: gic: allow irq_start to be 0   Rob Herring
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 2/5] irq: fix existing domain check in irq_domain_add   Thomas Gleixner
• [RFC 1/2] virtio: Add AMBA bus driver for virtio device   Pawel Moll
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH] ARM: mx31pdk: Fix build by passing IMX_HAVE_PLATFORM_MXC_MMC   Fabio Estevam
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Tony Lindgren
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Grant Likely
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Tony Lindgren
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH v3 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH 5/5] ARM: gic: add OF based initialization   Marc Zyngier
• Git pull request: support the appending of a DTB to zImage   Nicolas Pitre
• [PATCH v3 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH v4] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH 5/5] ARM: gic: add OF based initialization   Marc Zyngier
• [PATCH/RFC] mm: add vm_area_add_early()   Nicolas Pitre
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [PATCH v2] i2c: QUP based bus driver for Qualcomm MSM chipsets   Kenneth Heitke
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Tony Lindgren
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Russell King - ARM Linux
• [PATCH v2 0/2] make reinitialization of ARM core components possible   Russell King - ARM Linux
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Grant Likely
• [PATCH v4] power: bq20z75: devicetree init support   Grant Likely
• [PATCH v5] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH v3 0/2] Add device tree support for Samsung's I2C driver   Ben Dooks
• [PATCH V4 RESEND 1/6] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata   Florian Tobias Schandinat
• [PATCH] ARM: EXYNOS4: Enable double linefill in PL310 Prefetch Control Register   Siarhei Siamashka
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   Tony Lindgren
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Rob Clark
• [PATCH v3 0/6] OMAP2+: id: cleanup for 3.2   Paul Walmsley
• [PATCH v3 1/6] OMAP3: id: remove identification codes that only correspond to marketing names   Paul Walmsley
• [PATCH v3 2/6] OMAP3: id: remove useless strcpy()s   Paul Walmsley
• [PATCH v3 3/6] OMAP3: id: use explicit omap_revision codes for 3505/3517 ES levels   Paul Walmsley
• [PATCH v3 4/6] OMAP3: id: add fallthrough warning; fix some CodingStyle issues   Paul Walmsley
• [PATCH v3 5/6] OMAP3: id: remove duplicate code for testing SoC ES level   Paul Walmsley
• [PATCH v3 6/6] OMAP2+: id: remove OMAP_REVBITS_* macros   Paul Walmsley
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   Tony Lindgren
• [PATCH v2 0/4] OMAP2: clockdomain/powerdomain: remove OMAP_CHIP bitmasks   Paul Walmsley
• [PATCH v2 1/4] OMAP: clockdomain: split clkdm_init()   Paul Walmsley
• [PATCH v2 2/4] OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain   Paul Walmsley
• [PATCH v2 3/4] OMAP: powerdomain: split pwrdm_init() into two functions   Paul Walmsley
• [PATCH v2 4/4] OMAP: powerdomain: remove omap_chip bitmasks   Paul Walmsley
• [PATCH v2] OMAP2+: hwmod: remove OMAP_CHIP*   Paul Walmsley
• [PATCH 0/6] zImage improvements with DTB append and ATAG compatibility   David Brown
• OMAP2+: hwmod: remove OMAP_CHIP*   Paul Walmsley
• [Linaro-mm-sig] [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Kyungmin Park
• [PATCH v3 2/4] OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain   Paul Walmsley
• [PATCH v2] OMAP: id: remove OMAP_CHIP declarations, code   Paul Walmsley
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Rusty Russell
• [PATCH v2] OMAP3: powerdomains: Match silicon revision to select the correct "core_pwrdm" definition   Tony Lindgren
• [PATCH 18/25] OMAP4: suspend: Add MPUSS power domain RETENTION support   Kevin Hilman
• [RFC PATCH-V2 0/4] Introducing TI's New SoC/board AM335XEVM   Tony Lindgren
• [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data   Tony Lindgren
• [PATCH 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH v3 0/2] Add device tree support for Samsung's I2C driver   Thomas Abraham
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Shawn Guo
• [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data   Pedanekar, Hemant
• [PATCH v2 0/2] make reinitialization of ARM core components possible   Shawn Guo
• No subject   Jongpill Lee
• [PATCH 1/3] ARM: EXYNOS4: Modify PMU register setting function   Jongpill Lee
• [PATCH 2/3] ARM: EXYNOS4: Add PMU register definition for EXYNOS4212   Jongpill Lee
• [PATCH 3/3] ARM: EXYNOS4: Support suspend/resume for EXYNOS4212   Jongpill Lee
• [PATCH V3 3/6] MTD : add the database for the NANDs   Huang Shijie
• Tasks schedule/migration issue with CPU hotplug?   TAO HU
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh
• [PATCH 18/25] OMAP4: suspend: Add MPUSS power domain RETENTION support   Santosh
• gpio_ensure_requested error on mx31pdk boot   Fabio Estevam
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   DebBarma, Tarun Kanti
• [PATCH] arm: exynos4: fix incorrect pad configuration for keypad row lines   Kukjin Kim
• [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board   Kukjin Kim
• [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board   Kyungmin Park
• [RFC PATCH-V2 0/4] Introducing TI's New SoC/board AM335XEVM   Hiremath, Vaibhav
• gpio_ensure_requested error on mx31pdk boot   Uwe Kleine-König
• [PATCH v2 0/4] S3C2416: Enable IIS and HSSPI clocks   Heiko Stübner
• [PATCH] arm: sched_clock: Enable HAVE_SCHED_CLOCK support without init_sched_clock   Kyungmin Park
• [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board   Kukjin Kim
• [PATCH 2/2] ARM: Exynos4: use s5p-timer for UniversalC210 board   Kyungmin Park
• [PATCH 5/5] ARM: gic: add OF based initialization   Thomas Abraham
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [PATCH] ARM: exynos4: use the variable for S5P_VA_SYSRAM   Kyungmin Park
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Thomas Hellstrom
• [PATCH] arm: sched_clock: Enable HAVE_SCHED_CLOCK support without init_sched_clock   Russell King - ARM Linux
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Russell King - ARM Linux
• [PATCH] arm: sched_clock: Enable HAVE_SCHED_CLOCK support without init_sched_clock   Kyungmin Park
• [PATCH v2 0/2] make reinitialization of ARM core components possible   Russell King - ARM Linux
• [PATCHv2 0/3] Initial support for Picochip picoxcell   Jamie Iles
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   Mohammed, Afzal
• [PATCH v2 0/4] S3C2416: Enable IIS and HSSPI clocks   Kukjin Kim
• [PATCH 0/5] GIC OF bindings   Jamie Iles
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Cousson, Benoit
• [GIT PULL] Samsung Fixes for v3.1-rc7   Kukjin Kim
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• READ THIS: the next mach-types update   Russell King - ARM Linux
• [PATCH 5/5] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [PATCH 3/5] of/irq: introduce of_irq_init   Arnd Bergmann
• [PATCH 5/5] ARM: gic: add OF based initialization   Arnd Bergmann
• [RFC PATCH 00/11] Device tree support for regulators   Rajendra Nayak
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Rajendra Nayak
• [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply   Rajendra Nayak
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rajendra Nayak
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Rajendra Nayak
• [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT   Rajendra Nayak
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Rajendra Nayak
• [RFC PATCH 07/11] regulator: Make fixed regulator driver extract data from DT   Rajendra Nayak
• [RFC PATCH 08/11] omap4: panda: Pass fixed regulator data from DT   Rajendra Nayak
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Rajendra Nayak
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree   Rajendra Nayak
• [RFC PATCH 11/11] DT: regulator: register regulators as platform devices   Rajendra Nayak
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Benjamin Herrenschmidt
• confusion regarding the CMD19 and CMD21 in eMMC/SD card spec   Girish K S
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Shilimkar, Santosh
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Jamie Iles
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 5/5] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH v3 1/1] ASoC: mxs-saif: add record function   Dong Aisheng-B29396
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Woodruff, Richard
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Mark Brown
• [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply   Mark Brown
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Mark Brown
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Mark Brown
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Mark Brown
• [RFC PATCH 07/11] regulator: Make fixed regulator driver extract data from DT   Mark Brown
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 0/5] GIC OF bindings   Shawn Guo
• [PATCH v3 1/1] ASoC: mxs-saif: add record function   Wolfram Sang
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Mark Brown
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree   Mark Brown
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Konrad Rzeszutek Wilk
• [RFC PATCH 11/11] DT: regulator: register regulators as platform devices   Mark Brown
• [PATCH] DaVinci: only poll EPCPR on DM644x and DM355   Sergei Shtylyov
• [PATCH 2/2] ARM: mmp: add audio sram allocator   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/6] add initial imx6q support   Shawn Guo
• [PATCH v2 1/6] arm/imx6q: add device tree source   Shawn Guo
• [PATCH v2 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH v2 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH v2 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH v2 5/6] arm/imx6q: add device tree machine support   Shawn Guo
• [PATCH v2 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• READ THIS: the next mach-types update   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [PATCH 0/6] mc13783 cleanup   Samuel Ortiz
• [PATCH 0/6] mc13783 cleanup   Samuel Ortiz
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   gianluca
• READ THIS: the next mach-types update   Arnd Bergmann
• [PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Sylwester Nawrocki
• [GIT PULL] Samsung Fixes for v3.1-rc7   Arnd Bergmann
• [PATCH v3 0/2] Add device tree probe for i2c-imx driver   Shawn Guo
• [PATCH v3 1/2] i2c-imx: remove init/exit hooks from platform data   Shawn Guo
• [PATCH v3 2/2] i2c-imx: add device tree probe support   Shawn Guo
• [PATCH v3 0/2] Add device tree probe for i2c-imx driver   Ben Dooks
• Freescale i.mx25 SDIO/Libertas issue   Albert
• [PATCH 0/6] mc13783 cleanup   Uwe Kleine-König
• gpio_ensure_requested error on mx31pdk boot   Fabio Estevam
• [PATCH] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Fabio Estevam
• confusion regarding the CMD19 and CMD21 in eMMC/SD card spec   Philip Rakity
• [PATCH v2 6/6] arm/imx6q: add suspend/resume support   Lorenzo Pieralisi
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [RFC PATCH 0/3] genirq: handling GIC per-cpu interrupts   Marc Zyngier
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [RFC PATCH 2/3] ARM: gic: consolidate PPI handling   Marc Zyngier
• [RFC PATCH 3/3] ARM: gic, local timers: use the request_percpu_irq() interface   Marc Zyngier
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   Tony Lindgren
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   Tony Lindgren
• [PATCH 1/4] AM3517 : support for suspend/resume   Kevin Hilman
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Kevin Hilman
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Shilimkar, Santosh
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Stephen Boyd
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Tony Lindgren
• READ THIS: the next mach-types update   Olof Johansson
• [PATCH] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Uwe Kleine-König
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rob Herring
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Shilimkar, Santosh
• [PATCH] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Fabio Estevam
• [PATCH] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Fabio Estevam
• [PATCH v2] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Fabio Estevam
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rob Herring
• 3.1-rc1 link failure   Stephen Boyd
• READ THIS: the next mach-types update   Russell King - ARM Linux
• 3.1-rc1 link failure   Russell King - ARM Linux
• [PATCH] DaVinci: only poll EPCPR on DM644x and DM355   Karicheri, Muralidharan
• READ THIS: the next mach-types update   Nicolas Pitre
• [GIT PULL] OMAP voltage layer cleanup for v3.2   Kevin Hilman
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Tony Lindgren
• [PATCH v2] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Uwe Kleine-König
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Shilimkar, Santosh
• [PATCH v2] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Uwe Kleine-König
• [PATCH v3] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Fabio Estevam
• [PATCH v2] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Grant Likely
• [PATCH v2] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Grant Likely
• [PATCH v2] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Fabio Estevam
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Michał Mirosław
• [PATCH v3] spi/imx: Fix spi-imx when the hardware SPI chipselects are used   Grant Likely
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Grant Likely
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Grant Likely
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Grant Likely
• [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT   Grant Likely
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Grant Likely
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Thomas Gleixner
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Grant Likely
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Mark Brown
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Russell King - ARM Linux
• [GIT PULL] OMAP voltage layer cleanup for v3.2   Tony Lindgren
• [GIT PULL] OMAP: omap_device cleanup for v3.2   Kevin Hilman
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Thomas Gleixner
• [GIT PULL] OMAP: omap_device cleanup for v3.2   Kevin Hilman
• [RFC PATCH] ARM: mxc: Select ARCH_HAS_HOLES_MEMORYMODEL   Fabio Estevam
• [PATCH 2/2] ARM: mmp: add audio sram allocator   Leo Yan
• [PATCH v2] ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII   Barry Song
• [PATCH v8 0/4] add the GPMI-NAND support for imx23/imx28   Huang Shijie
• [alsa-devel] [PATCH v3 1/1] ASoC: mxs-saif: add record function   Dong Aisheng
• [alsa-devel] [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Dong Aisheng
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Barry Song
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   DebBarma, Tarun Kanti
• [PATCH 6/6] ARM: zImage: prevent constant copy+rebuild of lib1funcs.S   Stephen Boyd
• confusion regarding the CMD19 and CMD21 in eMMC/SD card spec   Girish K S
• confusion regarding the CMD19 and CMD21 in eMMC/SD card spec   Aaron Lu
• [PATCH 6/6] ARM: zImage: prevent constant copy+rebuild of lib1funcs.S   Nicolas Pitre
• [PATCH v2 0/5] CPU PM notifiers   Santosh
• confusion regarding the CMD19 and CMD21 in eMMC/SD card spec   Girish K S
• [PATCH] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Lei Wen
• [PATCH] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Simon Horman
• confusion regarding the CMD19 and CMD21 in eMMC/SD card spec   Aaron Lu
• [PATCH v2 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• Query about ARM interrupt virtualization   bill4carson
• confusion regarding the CMD19 and CMD21 in eMMC/SD card spec   Girish K S
• [PATCH 0/19] removal of mach/vmalloc.h and generic optimizations   Nicolas Pitre
• [PATCH 01/19] ARM: sort the meminfo array earlier   Nicolas Pitre
• [PATCH 02/19] ARM: mach-dove: remove inclusion of <mach/vmalloc.h>   Nicolas Pitre
• [PATCH 03/19] ARM: mach-prima2: don't define SIRFSOC_VA in terms of VMALLOC_END   Nicolas Pitre
• [PATCH 04/19] ARM: plat-mxc: remove inclusion of <mach/vmalloc.h>   Nicolas Pitre
• [PATCH 05/19] ARM: plat-omap: don't define OMAP1_SRAM_VA in terms of VMALLOC_END   Nicolas Pitre
• [PATCH 06/19] ARM: mach-at91: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 07/19] ARM: mach-davinci: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 08/19] ARM: mach-tegra: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 09/19] ARM: plat-omap: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 10/19] ARM: mach-bcmring: use proper constant to identify DMA memory area   Nicolas Pitre
• [PATCH 11/19] ARM: mach-orion5x: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 12/19] ARM: mach-kirkwood: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 13/19] ARM: mach-ixp23xx: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 14/19] ARM: plat-iop: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 15/19] mm: add vm_area_add_early()   Nicolas Pitre
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Nicolas Pitre
• [PATCH 17/19] ARM: simplify __iounmap() when dealing with section based mapping   Nicolas Pitre
• [PATCH 18/19] ARM: add generic ioremap optimization by reusing static mappings   Nicolas Pitre
• [PATCH 19/19] ARM: big removal of now unused vmalloc.h files   Nicolas Pitre
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Rajendra Nayak
• [RFC PATCH 02/11] regulator: Fix error check in set_consumer_device_supply   Rajendra Nayak
• [PATCH 6/6] ARM: zImage: prevent constant copy+rebuild of lib1funcs.S   Russell King - ARM Linux
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rajendra Nayak
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Rajendra Nayak
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Rajendra Nayak
• [RFC PATCH 09/11] DT: regulator: Helper to extract regulator node based on supply name   Rajendra Nayak
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree   Rajendra Nayak
• [RFC PATCH 11/11] DT: regulator: register regulators as platform devices   Rajendra Nayak
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Rajendra Nayak
• [RFC PATCH 05/11] TWL: regulator: Make twl-regulator driver extract data from DT   Rajendra Nayak
• [PATCH 03/19] ARM: mach-prima2: don't define SIRFSOC_VA in terms of VMALLOC_END   Barry Song
• READ THIS: the next mach-types update   Russell King - ARM Linux
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [alsa-devel] [PATCH v3 1/1] ASoC: mxs-saif: add record function   Mark Brown
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Mark Brown
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Mark Brown
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Mark Brown
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Mark Brown
• [RFC PATCH 10/11] regulator: Implement consumer regulator mapping from device tree   Mark Brown
• [PATCH] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH 0/7] ASoC: ep93xx: convert to use snd_soc_register_card()   Mark Brown
• [RFC PATCH 01/11] OMAP: TWL: Clean up mode and ops mask passed from board files   Rajendra Nayak
• [RFC PATCH 04/11] omap4: SDP: Pass regulator_init_data from DT   Rajendra Nayak
• [RFC PATCH 06/11] DT: regulator: Helper routine to extract fixed_voltage_config   Rajendra Nayak
• [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver   DebBarma, Tarun Kanti
• [PATCH 5/5] ARM: gic: add OF based initialization   Thomas Abraham
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Thomas Gleixner
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Thomas Gleixner
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Barry Song
• [RFC PATCH 03/11] DT: regulator: Helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH 0/4] ARM: Samsung: Add board setup for M-5MOLS and NOON010PC30 camera sensors   Sylwester Nawrocki
• [PATCH 1/4 (RESEND)] ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver   Sylwester Nawrocki
• [PATCH v2 2/4] ARM: S5PV210: Add support for NOON010PC30 sensor on GONI board   Sylwester Nawrocki
• [PATCH 3/4 (RESEND)] ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver   Sylwester Nawrocki
• [PATCH 4/4] ARM: S5PV210: UNIVERSAL_C210: Add support for M-5MOLS image sensor   Sylwester Nawrocki
• READ THIS: the next mach-types update   Richard Cochran
• try_to_freeze() called with IRQs disabled on ARM   Martin Schwidefsky
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Jamie Iles
• [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART   Will Deacon
• [GIT PULL] Perf, PMU and hw_breakpoint updates for 3.2   Will Deacon
• [GIT PULL] Samsung Fixes for v3.1-rc7   Kukjin Kim
• [PATCH v2 5/6] OMAP: omap_device: Create a default omap_device_pm_latency   Cousson, Benoit
• [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers.   Shilimkar, Santosh
• [PATCH 0/2] pin controller subsystem v7   Linus Walleij
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Ravi, Deepthy
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Laurent Pinchart
• [PATCH 0/19] removal of mach/vmalloc.h and generic optimizations   Jamie Iles
• [GIT PULL] Samsung Fixes for v3.1-rc7   Greg KH
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [RFC PATCH v2 0/3] genirq: handling GIC per-cpu interrupts   Marc Zyngier
• [RFC PATCH v2 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [RFC PATCH v2 2/3] ARM: gic: consolidate PPI handling   Marc Zyngier
• [RFC PATCH v2 3/3] ARM: gic, local timers: use the request_percpu_irq() interface   Marc Zyngier
• [PATCH] CLKDEV: Reduce scaning time   Jonghwan Choi
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH v2 0/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Benoit Cousson
• [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Benoit Cousson
• [PATCH v2 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Benoit Cousson
• [PATCH v2 6/6] arm/imx6q: add suspend/resume support   Lorenzo Pieralisi
• [ltt-dev] [PATCH] ARM: Set bit 0 for thumb mode in kallsyms_lookup_name returned address   Dave Martin
• [PATCH v3 1/2] mmc: sdio add regulator vsdio   Daniel Drake
• [PATCH 5/5] ARM: gic: add OF based initialization   Dave Martin
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [ltt-dev] LTTng 2.0 on ARM   Dave Martin
• [GIT PULL] Samsung Fixes for v3.1-rc7   Arnd Bergmann
• [PATCH v2 5/6] OMAP: omap_device: Create a default omap_device_pm_latency   Kevin Hilman
• [PATCH 3/7] ASoC: edb93xx: convert to use snd_soc_register_card()   Alexander Sverdlin
• [RFC v3] arm: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH] OMAP3: PM: fix UART handling when using no_console_suspend   Kevin Hilman
• [GIT PULL] OMAP PM cleanup for v3.2   Kevin Hilman
• [RFC v3] arm: Add platform bus driver for memory mapped virtio device   Anthony Liguori
• [PATCH 6/6] ARM: zImage: prevent constant copy+rebuild of lib1funcs.S   Stephen Boyd
• [PATCH 01/19] ARM: sort the meminfo array earlier   Stephen Boyd
• [PATCH 20/25] OMAP4: PM: Add L2X0 cache lowpower support   Kevin Hilman
• [PATCH v2 0/3] ARM: imx: Add cpuidle for imx platforms   Robert Lee
• [PATCH v2 1/3] ARM: imx: Add imx cpuidle driver   Robert Lee
• [PATCH v2 2/3] ARM: imx: Add cpuidle for mach-mx5   Robert Lee
• [PATCH v2 3/3] ARM: imx: Add cpuidle for i.MX51   Robert Lee
• [PATCH 23/25] OMAP4: PM: Add CPUidle support   Kevin Hilman
• [PATCH v2 0/6] OMAP3+ Clock Fixes   Jon Hunter
• [PATCH v2 1/6] OMAP4: Add missing clock divider for OCP_ABE_ICLK   Jon Hunter
• [PATCH v2 2/6] OMAP4: Clock: round_rate and recalc functions for DPLL_ABE   Jon Hunter
• [PATCH v3 3/6] OMAP3+: use DPLL's round_rate when setting rate   Jon Hunter
• [PATCH v2 4/6] OMAP3+: use DPLLs recalc function instead of omap2_get_dpll_rate   Jon Hunter
• [PATCH v2 5/6] OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devices   Jon Hunter
• [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks   Jon Hunter
• [PATCH 24/25] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.   Kevin Hilman
• [PATCH v3 0/6] iommu: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 2/6] iommu/omap: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v3 3/6] iommu/msm: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v3 4/6] iommu/amd: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v3 5/6] iommu/intel: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v3 6/6] iommu/core: remove the temporary register_iommu_pgsize API   Ohad Ben-Cohen
• [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping   Kevin Hilman
• [PATCH 01/19] ARM: sort the meminfo array earlier   Nicolas Pitre
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH 01/19] ARM: sort the meminfo array earlier   Stephen Boyd
• [PATCH 01/19] ARM: sort the meminfo array earlier   Nicolas Pitre
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Rob Herring
• [PATCH v2 1/3] ARM: imx: Add imx cpuidle driver   Russell King - ARM Linux
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Russell King - ARM Linux
• [GIT PULL] Samsung Fixes for v3.1-rc7   Kukjin Kim
• [GIT PULL] Samsung Fixes for v3.1-rc7   Kukjin Kim
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)   Tony Lindgren
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Tony Lindgren
• [GIT PULL] omap voltage cleanup for v3.2 merge window   Tony Lindgren
• READ THIS: the next mach-types update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ARM: vfp: fix a hole in VFP thread migration   Colin Cross
• [PATCH] ARM: BUG() dies silently   Rabin Vincent
• [PATCH 3/7] ASoC: edb93xx: convert to use snd_soc_register_card()   Mika Westerberg
• [PATCH v2 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH v2 2/2] ARM: smp_scu: remove __init annotation from scu_enable()   Shawn Guo
• [GIT PULL] Samsung Fixes for v3.1-rc7   Arnd Bergmann
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Martin Hostettler
• [PATCH] arm/dt: Add SoC detection macros   Russell King - ARM Linux
• [PATCH] arm/dt: Add SoC detection macros   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Russell King - ARM Linux
• [PATCH] arm/dt: Add SoC detection macros   Russell King - ARM Linux
• [GIT PULL] davinci fixes for v3.2 merge window   Nori, Sekhar
• [GIT PULL] davinci features for v3.2 merge windiow   Nori, Sekhar
• [PATCH 3/7] ASoC: edb93xx: convert to use snd_soc_register_card()   Alexander Sverdlin
• [PATCH 2/6] arm/imx6q: add core definitions and low-level debug uart   Russell King - ARM Linux
• [PATCH v2 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Lei Wen
• [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin   Axel Lin
• READ THIS: the next mach-types update   Pedanekar, Hemant
• READ THIS: the next mach-types update   Russell King - ARM Linux
• [ltt-dev] LTTng 2.0 on ARM   Jon Medhurst (Tixy)
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Barry Song
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Russell King - ARM Linux
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Russell King - ARM Linux
• [PATCH 01/19] ARM: sort the meminfo array earlier   Russell King - ARM Linux
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Shawn Guo
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Russell King - ARM Linux
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Grant Likely
• [PATCH 01/19] ARM: sort the meminfo array earlier   Nicolas Pitre
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Nicolas Pitre
• [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Grant Likely
• [PATCH v2 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Grant Likely
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Russell King - ARM Linux
• [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Russell King - ARM Linux
• [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Grant Likely
• [PATCH v4] power: bq20z75: devicetree init support   Grant Likely
• [PATCH] arm/dt: Add SoC detection macros   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Arnd Bergmann
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Arnd Bergmann
• [PATCH 1/3] at91/gpio: make gpio register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] at91/gpio: drop PIN_BASE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] at91/gpio: fix display of number of irq setuped   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Joe Perches
• [PATCH 0/19] removal of mach/vmalloc.h and generic optimizations   Arnd Bergmann
• [PATCH] arm/dt: Add SoC detection macros   Arnd Bergmann
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Grant Likely
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Sylwester Nawrocki
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Laurent Pinchart
• [PATCH 2/5] irq: fix existing domain check in irq_domain_add   Grant Likely
• [PATCH 3/5] of/irq: introduce of_irq_init   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH] arm/dt: Add SoC detection macros   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: mmp: add audio sram allocator   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] of/irq: introduce of_irq_init   Rob Herring
• [PATCH 0/19] removal of mach/vmalloc.h and generic optimizations   Nicolas Pitre
• [PATCH 3/5] of/irq: introduce of_irq_init   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 4/5] ARM: gic: allow irq_start to be 0   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 3/7] ASoC: edb93xx: convert to use snd_soc_register_card()   Mika Westerberg
• [PATCH 0/19] removal of mach/vmalloc.h and generic optimizations   Arnd Bergmann
• [PATCH 20/25] OMAP4: PM: Add L2X0 cache lowpower support   Santosh
• [PATCH 23/25] OMAP4: PM: Add CPUidle support   Santosh
• [PATCH 24/25] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.   Santosh
• [PATCH] arm/dt: Add SoC detection macros   Arnd Bergmann
• [PATCH v3] ARM: kprobes: Add some benchmarking to test module   Tixy
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH 3/7] ASoC: edb93xx: convert to use snd_soc_register_card()   Alexander Sverdlin
• [PATCH 0/4] add fec support for imx6q   Shawn Guo
• [PATCH 1/4] net/fec: change phy-reset-gpio request warning to debug message   Shawn Guo
• [PATCH 2/4] net/fec: fix fec1 check in fec_enet_mii_init()   Shawn Guo
• [PATCH 3/4] net/fec: set phy_speed to the optimal frequency 2.5 MHz   Shawn Guo
• [PATCH 4/4] net/fec: add imx6q enet support   Shawn Guo
• [PATCH 4/5] ARM: gic: allow irq_start to be 0   Russell King - ARM Linux
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)   DebBarma, Tarun Kanti
• [PATCH 1/3] ARM: EXYNOS4: Modify PMU register setting function   Sylwester Nawrocki
• READ THIS: the next mach-types update   Arnd Bergmann
• [PATCH 0/6] mc13783 cleanup   Samuel Ortiz
• [PATCH 4/4] net/fec: add imx6q enet support   Francois Romieu
• [PATCH 0/2] video: s3c-fb: Add window positioning support   Florian Tobias Schandinat
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   martin at neutronstar.dyndns.org
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   martin at neutronstar.dyndns.org
• [PATCH 0/2] video: s3c-fb: Add window positioning support   Laurent Pinchart
• [PATCH v2 0/7] S3C2443/S3C2416: Implement support for ADC   Heiko Stübner
• [PATCH 1/7] S3C2443/S3C2416: Add adc registers   Heiko Stübner
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Heiko Stübner
• [PATCH 3/7] s3c-adc: Replace TYPE_ADCVx conditionals with quirks   Heiko Stübner
• [PATCH 4/7] s3c-adc: Fix mux bit modification in s3c_adc_select   Heiko Stübner
• [PATCH 5/7] S3C24XX: Allow overriding of adc device name   Heiko Stübner
• [PATCH v2 6/7] s3c-adc: Add support for S3C2443   Heiko Stübner
• [PATCH v2 7/7] s3c-adc: Add support for S3C2416/S3C2450   Heiko Stübner
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Laurent Pinchart
• [PATCH 1/3] at91/gpio: make gpio register base soc independant   Ryan Mallon
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Abhijeet Dharmapurikar
• [PATCH 1/3] ARM: EXYNOS4: Modify PMU register setting function   Jongpill Lee
• [PATCH 2/3] ARM: EXYNOS4: Add PMU register definition for EXYNOS4212   Jongpill Lee
• [PATCH 3/3] ARM: EXYNOS4: Support suspend/resume for EXYNOS4212   Jongpill Lee
• [PATCH V2 0/3] ARM: EXYNOS4: Support suspend/resume for EXYNOS4212   Jongpill Lee
• [PATCH V2 1/3] ARM: EXYNOS4: Modify PMU register setting function   Jongpill Lee
• [PATCH V2 2/3] ARM: EXYNOS4: Add PMU register definition for EXYNOS4212   Jongpill Lee
• [PATCH V2 3/3] ARM: EXYNOS4: Support suspend/resume for EXYNOS4212   Jongpill Lee
• No subject   Saleem Abdulrasool
• [PATCH] mxcuart: add polled io methods   Saleem Abdulrasool
• [PATCH] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Lei Wen
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Vinod Koul
• [RFC v3] arm: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Barry Song
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)   Pedanekar, Hemant
• [PATCH 01/19] ARM: sort the meminfo array earlier   Nicolas Pitre
• [PATCH v4] mach-realview: expose PB1176 ROM using physmap and map_rom   Artem Bityutskiy
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Nicolas Pitre
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Nicolas Pitre
• [PATCH 0/19] removal of mach/vmalloc.h and generic optimizations   Nicolas Pitre
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)   Mohammed, Afzal
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Barry Song
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Hiremath, Vaibhav
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   martin at neutronstar.dyndns.org
• [PATCH v4 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• Freescale i.mx25 SDIO/Libertas issue   albert
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Laurent Pinchart
• [PATCH 1/2] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Tomasz Stanislawski
• [PATCH 2/3] at91/gpio: drop PIN_BASE   Nicolas Ferre
• [PATCH 36/62] i2c: irq: Remove IRQF_DISABLED   Barry Song
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH] ARM: supply a DTB file to be appended   Linus Walleij
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [RFC v3] arm: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH 4/4] net/fec: add imx6q enet support   Shawn Guo
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Linus Walleij
• [PATCH] gpio/mxc: make it work with imx6q   Shawn Guo
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [RFC PATCH] ARM: mxc: Select ARCH_HAS_HOLES_MEMORYMODEL   Sascha Hauer
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [PATCH] mmc: sdhci-esdhc-imx: add basic imx6q usdhc support   Shawn Guo
• [PATCH v2 2/6] arm/imx6q: add core definitions and low-level debug uart   Sascha Hauer
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v2 2/6] arm/imx6q: add core definitions and low-level debug uart   Eric Miao
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH] ARM: S3C2410: Adds WIZnet W5300E01-ARM board support   Taehun Kim
• [PATCH v2 2/6] arm/imx6q: add core definitions and low-level debug uart   Sascha Hauer
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v2 2/6] arm/imx6q: add core definitions and low-level debug uart   Eric Miao
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH v3 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH v3 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH v3 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Pawel Moll
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Kukjin Kim
• Temporary change the URL of s5p tree for linux-next   Kukjin Kim
• [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Kukjin Kim
• [PATCH v2 1/4] ARM: mx53: Add pads for flexcan pins   Sascha Hauer
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Jassi Brar
• [GIT PULL] Samsung cleanup for v3.2   Kukjin Kim
• [GIT PULL] Samsung boards for v3.2   Kukjin Kim
• [PATCH v2 4/4] ARM: mx53_ard: Add flexcan support   Sascha Hauer
• [PATCH] pata-generic/of: Make probing via device tree non-powerpc-specific   Dave Martin
• [PATCH 1/7 (RE-SEND)] gpio/s3c24xx: move gpio driver into drivers/gpio/   Kukjin Kim
• [PATCH] CLKDEV: Reduce scaning time   Russell King - ARM Linux
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Russell King - ARM Linux
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Russell King - ARM Linux
• [PATCH 01/19] ARM: sort the meminfo array earlier   Russell King - ARM Linux
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH] ARM: SAMSUNG: Cleanup mach/clkdev.h   Kukjin Kim
• [PATCH] ARM: SAMSUNG: plat-samsung/include/plat/pwm-clock.h   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Cleanup plat/pll.h   Kukjin Kim
• [PATCH 5/5] ARM: gic: add OF based initialization   Dave Martin
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• Link failures due to __bug_table in current -next   Mark Brown
• [PATCH] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Russell King - ARM Linux
• [PATCH 01/11] at91/gpio: make gpio register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] at91/boards: use -1 for invalid gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] at91/soc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] at91/pata: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] at91/ide: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] ARM: gic: add OF based initialization   Thomas Abraham
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Cousson, Benoit
• [PATCH v2 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Cousson, Benoit
• [RFC v3] arm: Add platform bus driver for memory mapped virtio device   Anthony Liguori
• [PATCH 5/5] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [PATCH 06/19] ARM: mach-at91: remove arch specific special handling for ioremap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH] ARM: mach-qong: Add watchdog support   Fabio Estevam
• [PATCH 06/11] at91/mmc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] at92/nand: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] at92/udc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] at92/ohci: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] at91/gpio: drop PIN_BASE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] at91/gpio: fix display of number of irq setuped   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Lei Wen
• [PATCH 06/19] ARM: mach-at91: remove arch specific special handling for ioremap   Russell King - ARM Linux
• [PATCH v2 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH] ARM: BUG() dies silently   Ramirez Luna, Omar
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Russell King - ARM Linux
• [PATCH] ARM: BUG() dies silently   Russell King - ARM Linux
• READ THIS: the next mach-types update   Pedanekar, Hemant
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Russell King - ARM Linux
• [PATCH 16/19] ARM: move iotable mappings within the vmalloc region   Nicolas Pitre
• [PATCH v2 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Cousson, Benoit
• [PATCH 06/19] ARM: mach-at91: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 06/19] ARM: mach-at91: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH] ARM: supply a DTB file to be appended   Nicolas Pitre
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Hiremath, Vaibhav
• READ THIS: the next mach-types update   Richard Cochran
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Arnd Bergmann
• [PATCH 5/5] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Russell King - ARM Linux
• [PATCH] ARM: mach-qong: Add watchdog support   Stefano Babic
• [PATCH 10/11] ARM: pm: convert some assembly to C   Russell King - ARM Linux
• [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend   Russell King - ARM Linux
• [PATCH 1/7] ARM: pm: force non-zero return value from __cpu_suspend when aborting   Russell King - ARM Linux
• [PATCH 2/7] ARM: pm: preallocate a page table for suspend/resume   Russell King - ARM Linux
• [PATCH 3/7] ARM: pm: only use preallocated page table during resume   Russell King - ARM Linux
• [PATCH 4/7] ARM: pm: no need to save/restore context ID register   Russell King - ARM Linux
• [PATCH 5/7] ARM: pm: get rid of cpu_resume_turn_mmu_on   Russell King - ARM Linux
• [PATCH 6/7] ARM: pm: convert some assembly to C   Russell King - ARM Linux
• [PATCH 7/7] ARM: pm: add L2 cache cleaning for suspend   Russell King - ARM Linux
• [PATCH] ARM: BUG() dies silently   Russell King - ARM Linux
• [PATCH] ARM: pl330: Fix a race condition   Javi Merino
• [PATCH] arm/dt: Add SoC detection macros   Allen Martin
• [PATCH v3 0/4] ARM: Samsung: Add board setup for M-5MOLS and NOON010PC30 camera sensors   Sylwester Nawrocki
• [PATCH v3 1/4] ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver   Sylwester Nawrocki
• [PATCH v3 2/4] ARM: S5PV210: Add support for NOON010PC30 sensor on GONI board   Sylwester Nawrocki
• [PATCH v3 3/4] ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver   Sylwester Nawrocki
• [PATCH v3 4/4] ARM: S5PV210: UNIVERSAL_C210: Add support for M-5MOLS image sensor   Sylwester Nawrocki
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)   Tony Lindgren
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)   Tony Lindgren
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)   Tony Lindgren
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH V5 0/6] ARM: S5P64X0: Add Framebuffer support   Ajay Kumar
• [PATCH RESEND V5 1/6] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata   Ajay Kumar
• [PATCH RESEND V5 2/6] ARM: S5P64X0: Add register base and IRQ for Framebuffer   Ajay Kumar
• [PATCH RESEND V5 3/6] ARM: S5P64X0: Set s3c_device_fb name   Ajay Kumar
• [PATCH RESEND V5 4/6] ARM: S5P64X0: Add GPIO setup for LCD   Ajay Kumar
• [PATCH V5 5/6] ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer support   Ajay Kumar
• [PATCH V5 6/6] ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer support   Ajay Kumar
• [PATCH] msm: platsmp: Mark ioremapped memory as __iomem   Stephen Boyd
• [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice   Stephen Boyd
• [PATCH 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Stephen Boyd
• [PATCH] ARM: BUG() dies silently   Simon Glass
• [PATCH] ARM: pl330: Fix a race condition   Jassi Brar
• [PATCH] ARM: BUG() dies silently   Russell King - ARM Linux
• [PATCH] ARM: BUG() dies silently   Ramirez Luna, Omar
• Link failures due to __bug_table in current -next   Russell King - ARM Linux
• Link failures due to __bug_table in current -next   Mark Brown
• Link failures due to __bug_table in current -next   Russell King - ARM Linux
• Link failures due to __bug_table in current -next   Mark Brown
• [PATCH] msm: platsmp: Mark ioremapped memory as __iomem   Arnd Bergmann
• Link failures due to __bug_table in current -next   Russell King - ARM Linux
• Link failures due to __bug_table in current -next   Russell King - ARM Linux
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Guennadi Liakhovetski
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   martin at neutronstar.dyndns.org
• [PATCH v2] arm: omap3evm: Add support for an MT9M032 based camera board.   Hiremath, Vaibhav
• Link failures due to __bug_table in current -next   Russell King - ARM Linux
• [PATCH] arm/dt: Add SoC detection macros   Olof Johansson
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice   Will Deacon
• [PATCH 5/5] ARM: gic: add OF based initialization   Rob Herring
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Laura Abbott
• [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice   Stephen Boyd
• alloc_safe_buffer/map_single problem related to ath9k on ARM   B. J.
• alloc_safe_buffer/map_single problem related to ath9k on ARM   Russell King - ARM Linux
• [PATCH 3/4] net/fec: set phy_speed to the optimal frequency 2.5 MHz   Troy Kisky
• [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice   Russell King - ARM Linux
• [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice   Stephen Boyd
• READ THIS: the next mach-types update   H Hartley Sweeten
• [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice   Will Deacon
• Sept 14th struct_clk discussion meetings notes   Deepak Saxena
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Nicolas Pitre
• [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states   Kevin Hilman
• [PATCH] ARM: OMAP: Add support for dmtimer v2 ip (Re: [PATCH v15 06/12] OMAP: dmtimer: switch-over to platform device driver)   Pedanekar, Hemant
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• Temporary change the URL of s5p tree for linux-next   Stephen Rothwell
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Laura Abbott
• [PATCH 3/4] net/fec: set phy_speed to the optimal frequency 2.5 MHz   Shawn Guo
• [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend   Shawn Guo
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend   Shawn Guo
• [PATCH 5/5] ARM: gic: add OF based initialization   Grant Likely
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Jassi Brar
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH] mach-ux500: enable fix for ARM errata 754322   srinidhi kasagar
• [PATCH 16/18] dmaengine/ambhe rest oa-pl08x: Add support for sg len greater than one for slave transfers   Vinod Koul
• [PATCH 16/18] dmaengine/ambhe rest oa-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
• [PATCH] mach-ux500: enable fix for ARM errata 754322   Linus Walleij
• [PATCH 0/6] mc13783 cleanup   Philippe Rétornaz
• Link failures due to __bug_table in current -next   Simon Glass
• [PATCH v2 0/3] ARM: imx: Add cpuidle for imx platforms   Sascha Hauer
• Link failures due to __bug_table in current -next   Uwe Kleine-König
• [PATCH] ARM: mach-qong: Add watchdog support   Sascha Hauer
• [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend   Russell King - ARM Linux
• [PATCH 3/4] net/fec: set phy_speed to the optimal frequency 2.5 MHz   Lothar Waßmann
• [GIT PULL] ux500-core for 3.2   Linus Walleij
• Link failures due to __bug_table in current -next   Russell King - ARM Linux
• [PATCH v2 0/3] ARM: imx: Add cpuidle for imx platforms   Amit Kucheria
• [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend   Shawn Guo
• [PATCH 16/18] dmaengine/ambhe rest oa-pl08x: Add support for sg len greater than one for slave transfers   Vinod Koul
• [PATCH 3/4] net/fec: set phy_speed to the optimal frequency 2.5 MHz   Shawn Guo
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Linus Walleij
• [PATCH 15/19] plat-pxa: break out GPIO driver specifics   Linus Walleij
• [PATCH 1/2] gpio/nomadik: disable clocks when unused   Linus Walleij
• [PATCH 2/2] gpio/nomadik: use genirq core to track enablement   Linus Walleij
• [PATCH] usb: musb: OMAP4430: Remove a redundant omap4430_phy_init call in usb_musb_init   Axel Lin
• [PATCH 1/1] mx31moboard: Add poweroff support   Philippe Rétornaz
• [PATCH 00/10] hwspinlock-next   Ohad Ben-Cohen
• [PATCH 08/11] at92/udc: use gpio_is_valid to check the gpio   Sebastian Andrzej Siewior
• [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend   Santosh
• Link failures due to __bug_table in current -next   Mark Brown
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Tomi Valkeinen
• [PATCH V2 0/6] spi/spi-pl022 fixes   Viresh Kumar
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Baruch Siach
• [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Vishwanath Sripathy
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver   Tarun Kanti DebBarma
• [PATCH v16 01/12] OMAP2+: dmtimer: add device names to flck nodes   Tarun Kanti DebBarma
• [PATCH v16 02/12] OMAP1: dmtimer: conversion to platform devices   Tarun Kanti DebBarma
• [PATCH v16 03/12] OMAP2+: dmtimer: convert to platform devices   Tarun Kanti DebBarma
• [PATCH v16 04/12] OMAP: dmtimer: platform driver   Tarun Kanti DebBarma
• [PATCH v16 05/12] OMAP: dmtimer: switch-over to platform device driver   Tarun Kanti DebBarma
• [PATCH v16 06/12] OMAP: dmtimer: pm_runtime support   Tarun Kanti DebBarma
• [PATCH v16 07/12] OMAP: dmtimer: add timeout to low-level routines   Tarun Kanti DebBarma
• [PATCH v16 08/12] OMAP: dmtimer: do remaining initialization in probe   Tarun Kanti DebBarma
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support   Tarun Kanti DebBarma
• [PATCH v16 10/12] OMAP: dmtimer: extend spinlock in request functions   Tarun Kanti DebBarma
• [PATCH v16 11/12] OMAP: dmtimer: add error handling to export APIs   Tarun Kanti DebBarma
• [PATCH v16 12/12] OMAP: dmtimer: get rid of timer_ip_version field   Tarun Kanti DebBarma
• [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Santosh
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Philippe Rétornaz
• [PATCH 0/7] Add L2 cache cleaning to generic CPU suspend   Lorenzo Pieralisi
• DT vs ARM static mappings   Pawel Moll
• [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Santosh
• [PATCH V2] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Lei Wen
• [PATCH] i.MX: use CONFIG_MULTI_IRQ_HANDLER   Sascha Hauer
• [PATCH 1/4] ARM i.MX avic: add handle_irq function   Sascha Hauer
• [PATCH 2/4] ARM i.MX tzic: add handle_irq function   Sascha Hauer
• [PATCH 3/4] ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER   Sascha Hauer
• [PATCH 4/4] ARM i.MX entry-macro.S: remove now unused code   Sascha Hauer
• DT vs ARM static mappings   Rob Herring
• [PATCH] gpio/mxc: make it work with imx6q   Jamie Iles
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Nicolas Pitre
• [PATCH] ARM: pl330: Fix a race condition   Javi Merino
• DT vs ARM static mappings   Pawel Moll
• [PATCH] usb: musb: OMAP4430: Remove a redundant omap4430_phy_init call in usb_musb_init   Bjarne Steinsbo
• [PATCH-V3 0/4] Introducing TI's New SoC/board AM335XEVM   hvaibhav at ti.com
• [PATCH-V3 1/4] arm:omap:am33xx: Update common omap platform files   hvaibhav at ti.com
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources   hvaibhav at ti.com
• [PATCH-V3 3/4] arm:omap:am33xx: Create board support and enable build for AM335XEVM   hvaibhav at ti.com
• [PATCH-V3 4/4] arm:omap:am33xx: Add low level debugging support   hvaibhav at ti.com
• DT vs ARM static mappings   Rob Herring
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Ajay kumar
• [PATCH 0/5] OMAP3EVM: Add support for MT9T111 sensor   Deepthy Ravi
• [PATCH 1/5] omap3evm: Enable regulators for camera interface   Deepthy Ravi
• [PATCH 2/5] [media] v4l: Add mt9t111 sensor driver   Deepthy Ravi
• [PATCH 3/5] omap3evm: Add Camera board init/hookup file   Deepthy Ravi
• [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats   Deepthy Ravi
• [PATCH 5/5] omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers   Deepthy Ravi
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Catalin Marinas
• [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping   Santosh Shilimkar
• [PATCH 2/5] [media] v4l: Add mt9t111 sensor driver   Guennadi Liakhovetski
• [PATCH 5/5] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Ajay kumar
• [PATCH 0/3] FB: Add window positioning support   Ajay Kumar
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Ajay Kumar
• [PATCH 2/3] ARM: SAMSUNG: Embed window positioning data structure in s3c-fb plat data   Ajay Kumar
• [PATCH 3/3] video: s3c-fb: Modify s3c-fb driver to support window positioning   Ajay Kumar
• [PATCH v2 6/6] arm/imx6q: add suspend/resume support   Lorenzo Pieralisi
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Tomi Valkeinen
• [PATCH v2 0/3] ARM: imx: Add cpuidle for imx platforms   Rob Lee
• [PATCH v2 0/3] ARM: imx: Add cpuidle for imx platforms   Rob Lee
• DT vs ARM static mappings   Pawel Moll
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Stephen Warren
• [PATCH REPOST 2/2] arm/dt: Tegra: Add support-8bit to SDHCI nodes   Stephen Warren
• [PATCH] i2c/tegra: I2C driver uses the suspend_noirq/resume_noirq   Stephen Warren
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Florian Tobias Schandinat
• Link failures due to __bug_table in current -next   Simon Glass
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Baruch Siach
• [PATCH V2 1/6] spi/spi-pl022: Resolve formatting issues   Grant Likely
• [PATCH V2 0/6] spi/spi-pl022 fixes   Grant Likely
• [PATCH 2/2] gpio/nomadik: use genirq core to track enablement   Grant Likely
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Grant Likely
• [PATCH REPOST 2/2] arm/dt: Tegra: Add support-8bit to SDHCI nodes   Grant Likely
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Grant Likely
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Arnd Bergmann
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   H Hartley Sweeten
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Stephen Warren
• [GIT PULL] ux500-core for 3.2   Nicolas Pitre
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Chris Ball
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Grant Likely
• Link failures due to __bug_table in current -next   Russell King - ARM Linux
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Tomi Valkeinen
• [PATCH v2 0/3] ARM: imx: Add cpuidle for imx platforms   Sascha Hauer
• [PATCH 0/4] add fec support for imx6q   David Miller
• [PATCH 3/4] net/fec: set phy_speed to the optimal frequency 2.5 MHz   David Miller
• Link failures due to __bug_table in current -next   Arnd Bergmann
• DT vs ARM static mappings   Arnd Bergmann
• [PATCH v2] pata-generic/of: Make probing via device tree non-powerpc-specific   Jeff Garzik
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Arnd Bergmann
• IRQF_TRIGGER_LOW and ARM GIC   Stephen Warren
• Link failures due to __bug_table in current -next   Nicolas Pitre
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Arnd Bergmann
• [PATCH 3/4] net/fec: set phy_speed to the optimal frequency 2.5 MHz   Troy Kisky
• [GIT PULL] omap voltage cleanup for v3.2 merge window   Arnd Bergmann
• [GIT PULL] davinci fixes for v3.2 merge window   Arnd Bergmann
• [PATCH 3/4] net/fec: set phy_speed to the optimal frequency 2.5 MHz   Troy Kisky
• [PATCH 0/2] pin controller subsystem v7   Stephen Warren
• [GIT PULL] davinci features for v3.2 merge windiow   Arnd Bergmann
• [GIT PULL] Samsung cleanup for v3.2   Arnd Bergmann
• [PATCH 0/3] GIC OF bindings   Rob Herring
• [PATCH 1/3] of/irq: of_irq_find_parent: check for parent equal to child   Rob Herring
• [PATCH 2/3] of/irq: introduce of_irq_init   Rob Herring
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [GIT PULL] Samsung boards for v3.2   Arnd Bergmann
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Sascha Hauer
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Linus Walleij
• [PATCH] mach-integrator: fix VGA base regression   Linus Walleij
• [PATCH] spi: Fix builderror in spi-pl022.c   Linus Walleij
• [GIT PULL] ux500-core for 3.2   Arnd Bergmann
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Tony Lindgren
• [PATCH] mach-integrator: fix VGA base regression   Arnd Bergmann
• [PATCH 1/3] of/irq: of_irq_find_parent: check for parent equal to child   Grant Likely
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Arnd Bergmann
• [GIT PULL] omap voltage cleanup for v3.2 merge window   Tony Lindgren
• [GIT PULL] arm-soc fixes for v3.1-rc7   Arnd Bergmann
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Arnd Bergmann
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Olof Johansson
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Arnd Bergmann
• [PATCH] spi: Fix builderror in spi-pl022.c   Grant Likely
• [PATCH 1/2] drivers: create a pin control subsystem v7   Stephen Warren
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Stephen Warren
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Tony Lindgren
• [PATCH V2] ARM: kdump: copy kernel relocation code at the kexec prepare stage   Russell King - ARM Linux
• [PATCH 2/3] of/irq: introduce of_irq_init   Grant Likely
• [PATCH 3/3] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 00/10] hwspinlock-next   Tony Lindgren
• [PATCH 5/5] omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers   Laurent Pinchart
• [PATCH] ARM: OMAP2+: Fix missing inline functions for Makefile cleanup (Re: [GIT PULL] omap cleanup part1 for v3.2 merge window)   Tony Lindgren
• [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats   Laurent Pinchart
• [PATCH 4/7] gpio/samsung: Remove useless old Samsung related GPIO drivers   Grant Likely
• [PATCH 00/10] hwspinlock-next   Greg KH
• [PATCH 5/7] gpio/samsung: Added gpio-samsung.c to support Samsung GPIOs   Grant Likely
• [PATCH 1/7 (RE-SEND)] gpio/s3c24xx: move gpio driver into drivers/gpio/   Grant Likely
• [PATCH 5/5] omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers   Tony Lindgren
• [PATCH 4/7] gpio/samsung: Remove useless old Samsung related GPIO drivers   Kukjin Kim
• [PATCH 5/7] gpio/samsung: Added gpio-samsung.c to support Samsung GPIOs   Kukjin Kim
• [PATCH 1/7 (RE-SEND)] gpio/s3c24xx: move gpio driver into drivers/gpio/   Kukjin Kim
• [PATCH 0/19] removal of mach/vmalloc.h and generic optimizations   Nicolas Pitre
• [PATCHv2 1/2] ARM: debug: Add UART1 config choices   Stephen Boyd
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Stephen Boyd
• [GIT PULL] Samsung boards for v3.2   Kukjin Kim
• [GIT PULL] Samsung cleanup for v3.2   Kukjin Kim
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH 0/3] GIC OF bindings   David Miller
• [PATCH] serial: samsung: move handling of fclk/n clock to platform code   Thomas Abraham
• [PATCH] mxcuart: add polled io methods   Fabio Estevam
• [PATCH 0/3] GIC OF bindings   Grant Likely
• [PATCH 0/3] GIC OF bindings   Mitch Bradley
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
• [PATCH 0/3] GIC OF bindings   Segher Boessenkool
• [PATCH 0/3] GIC OF bindings   David Miller
• [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats   Ravi, Deepthy
• [PATCH V2 0/3] Add TVOUT support for SMDKV310   Hatim Ali
• [PATCH V2 1/3] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Hatim Ali
• [RESEND PATCH 2/3] ARM: EXYNOS4: Update consistent DMA size to 8MB   Hatim Ali
• [RESEND PATCH 3/3] s5p-tv: Add PM_RUNTIME dependency   Hatim Ali
• [PATCH] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH v8 00/16] To use DMA generic APIs for Samsung DMA   Vinod Koul
• [RESEND PATCH 2/3] ARM: EXYNOS4: Update consistent DMA size to 8MB   Kyungmin Park
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Tomi Valkeinen
• [PATCH] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Sascha Hauer
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Arnd Bergmann
• [PATCH 0/3] GIC OF bindings   Mitch Bradley
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Ajay kumar
• omap3: I2C: failure in wakeup from S2R   Ming Lei
• [PATCH 1/3] include: fb: Add definiton for window positioning structure   Ajay kumar
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Shawn Guo
• [GIT PULL] ARM: kprobes: Add test code to kernel tree   Tixy
• [PATCH] ARM: cache-l2x0: add resume entry for l2 in secure mode   Russell King - ARM Linux
• [PATCH] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH] ARM: cache-l2x0: add resume entry for l2 in secure mode   Russell King - ARM Linux
• [PATCH] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Stephen Boyd
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Jassi Brar
• [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats   Laurent Pinchart
• [PATCH 1/2] drivers: create a pin control subsystem v7   Linus Walleij
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [RESEND PATCH 2/3] ARM: EXYNOS4: Update consistent DMA size to 8MB   Tushar Behera
• [PATCH 24/57] SCSI: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 30/57] dmaengine: irq: Remove IRQF_DISABLED   Yong Zhang
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Arnd Bergmann
• [PATCH 32/57] i2c: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 02/11] at91/boards: use -1 for invalid gpio   Nicolas Ferre
• [PATCH 46/57] rtc: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 49/57] video: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 51/57] watchdog: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 53/57] sound: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH RESEND] mmc: sdio: rw extended, use a sg entry for each block   Nicolas Ferre
• DT vs ARM static mappings   Pawel Moll
• [PATCH 0/3] GIC OF bindings   Shawn Guo
• [PATCH 2/3] at91/gpio: drop PIN_BASE   Nicolas Ferre
• [PATCH 53/57] sound: irq: Remove IRQF_DISABLED   Takashi Iwai
• [PATCH 46/57] rtc: irq: Remove IRQF_DISABLED   Wan ZongShun
• [PATCH 53/57] sound: irq: Remove IRQF_DISABLED   Thomas Gleixner
• DT vs ARM static mappings   Dave Martin
• [PATCH 2/3] of/irq: introduce of_irq_init   Jamie Iles
• DT vs ARM static mappings   Pawel Moll
• [PATCH 53/57] sound: irq: Remove IRQF_DISABLED   Ujfalusi, Peter
• [rtc-linux] [PATCH 46/57] rtc: irq: Remove IRQF_DISABLED   Wolfram Sang
• [PATCH 2/2] arm: samsung: remove sdhci default configuration setup platform helper   Kukjin Kim
• [PATCH v2 0/2] Move sdhci-s3c platform helper into driver   Kukjin Kim
• [PATCH 0/2] pin controller subsystem v7   Linus Walleij
• [PATCH v2 0/2] Move sdhci-s3c platform helper into driver   Thomas Abraham
• [PATCH v2 1/2] mmc: sdhci-s3c: add default controller configuration   Kukjin Kim
• [PATCH v2 3/3] net/fec: add imx6q enet support   Fabio Estevam
• [PATCH v2 0/3] add fec support for imx6q   Shawn Guo
• [PATCH v2 1/3] net/fec: change phy-reset-gpio request warning to debug message   Shawn Guo
• [PATCH v2 2/3] net/fec: fix fec1 check in fec_enet_mii_init()   Shawn Guo
• [PATCH v2 3/3] net/fec: add imx6q enet support   Shawn Guo
• [PATCH] OMAP2+: UART: Do not gate uart clocks if used for debug_pr=   Govindraj.R
• [PATCH v2 1/3] net/fec: change phy-reset-gpio request warning to debug message   Wolfram Sang
• [PATCH 0/11 v2] ARM: AT91: update gpio implementation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/3] net/fec: add imx6q enet support   Shawn Guo
• [PATCH 01/11 V2] ARM: at91/gpio: make gpio register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11 vw] ARM: at91/boards: use -EINVAL for invalid gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11 V2] ARM: at91/soc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11 v2] ARM: at91/pata: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11 v2] ARM: at91/ide: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11 v2] ARM: at91/mmc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11 v2] ARM: at92/nand: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11 v2] ARM: at92/udc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11 v2] ARM: at92/ohci: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11 v2] ARM: at91/gpio: drop PIN_BASE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11 v2] ARM: at91/gpio: fix display of number of irq setuped   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 3/3] net/fec: add imx6q enet support   Wolfram Sang
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Dave Martin
• [PATCH v3 0/4] ARM: Samsung: Add board setup for M-5MOLS and NOON010PC30 camera sensors   Kukjin Kim
• [PATCH V2 0/3] ARM: EXYNOS4: Support suspend/resume for EXYNOS4212   Kukjin Kim
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Russell King - ARM Linux
• [RESEND PATCH 2/3] ARM: EXYNOS4: Update consistent DMA size to 8MB   Kukjin Kim
• [PATCH v2 3/3] net/fec: add imx6q enet support   Shawn Guo
• [PATCH v2 1/3] net/fec: change phy-reset-gpio request warning to debug message   Shawn Guo
• [PATCH V2 1/3] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Kukjin Kim
• [PATCH 53/57] sound: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH v5 00/15] OMAP2+: Serial: Runtime adaptation + cleanup   Govindraj.R
• [PATCH v2 1/3] net/fec: change phy-reset-gpio request warning to debug message   Wolfram Sang
• [PATCH v5 01/15] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Govindraj.R
• [PATCH v5 02/15] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH 53/57] sound: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH V5 0/6] ARM: S5P64X0: Add Framebuffer support   Kukjin Kim
• [PATCH v5 03/15] OMAP2+: UART: cleanup + remove uart pm specific API   Govindraj.R
• [PATCH v5 04/15] OMAP2+: UART: cleanup 8250 console driver support   Govindraj.R
• [PATCH v5 05/15] OMAP2+: UART: Cleanup part of clock gating mechanism for uart   Govindraj.R
• [PATCH v5 06/15] OMAP2+: UART: Remove certain feilds from omap_uart_state struct   Govindraj.R
• [PATCH v5 07/15] OMAP2+: UART: Add default mux for all uarts.   Govindraj.R
• [PATCH v5 08/15] OMAP2+: UART: Store certain reg values to port structure   Govindraj.R
• [PATCH v5 09/15] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj.R
• [PATCH v5 10/15] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Govindraj.R
• [PATCH v5 11/15] OMAP2+: UART: Allow UART parameters to be configured from board file.   Govindraj.R
• [PATCH v5 12/15] OMAP2+: UART: Make the RX_TIMEOUT for DMA configurable for each UART   Govindraj.R
• [PATCH v5 13/15] OMAP2+: UART: Take console_lock in suspend path if not taken   Govindraj.R
• [PATCH v5 14/15] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Govindraj.R
• [PATCH v5 15/15] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Govindraj.R
• [PATCH v2 1/2] mmc: sdhci-s3c: add default controller configuration   Chris Ball
• [PATCH] gpio/mxc: make it work with imx6q   Shawn Guo
• [PATCH v2 3/3] net/fec: add imx6q enet support   Wolfram Sang
• [PATCH v2 1/2] mmc: sdhci-s3c: add default controller configuration   Kukjin Kim
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Kukjin Kim
• [PATCH 0/5] S5P64X0 PM Support   Kukjin Kim
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Marek Szyprowski
• [PATCH v2 1/3] net/fec: change phy-reset-gpio request warning to debug message   Shawn Guo
• [PATCH V2 1/3] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Tomasz Stanislawski
• [PATCH v2 1/3] net/fec: change phy-reset-gpio request warning to debug message   Wolfram Sang
• [PATCH V5 0/6] ARM: S5P64X0: Add Framebuffer support   Ajay kumar
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Heiko Stübner
• [PATCH V2 1/3] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Sylwester Nawrocki
• [V3 0/4] ARM: mmp: Add mmc support on pxa910 DKB board   Jun Nie
• [PATCH] mmc: check SDIO card wake up during suspending   Jun Nie
• [PATCH] spi: Fix builderror in spi-pl022.c   Russell King - ARM Linux
• [PATCH 2/8] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH v2 1/3] net/fec: change phy-reset-gpio request warning to debug message   Shawn Guo
• [GIT PULL] davinci fixes for v3.2 merge window   Nori, Sekhar
• [PATCH] gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler()   Shawn Guo
• [PATCH] ARM: vexpress: initial device tree support   Rob Herring
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Dave Martin
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Rob Clark
• [PATCH V2 1/3] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Hatim R.V.
• [PATCH 7/8] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH V2 1/3] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Hatim R.V.
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Tony Lindgren
• [PATCH 15/19] plat-pxa: break out GPIO driver specifics   Eric Miao
• [PATCH 2/8] mm: alloc_contig_freed_pages() added   Dave Hansen
• [PATCH 00/10] hwspinlock-next   Arnd Bergmann
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [PATCH] ARM: vexpress: initial device tree support   Pawel Moll
• [PATCH v7 01/26] gpio/omap: remove dependency on gpio_bank_count   Tony Lindgren
• [PATCH v7 04/26] gpio/omap: fix pwrdm_post_transition call sequence   Tony Lindgren
• [PATCH v7 05/26] gpio/omap: handle save/restore context in GPIO driver   Tony Lindgren
• [PATCH v7 06/26] gpio/omap: make non-wakeup GPIO part of pdata   Tony Lindgren
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Arnd Bergmann
• [PATCH v7 07/26] gpio/omap: avoid cpu checks during module ena/disable   Tony Lindgren
• [PATCH v7 08/26] gpio/omap: further cleanup using wkup_en register   Tony Lindgren
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Marek Szyprowski
• [PATCH v7 09/26] gpio/omap: use level/edge detect reg offsets   Tony Lindgren
• [PATCH v7 10/26] gpio/omap: remove hardcoded offsets in context save/restore   Tony Lindgren
• [PATCH v7 11/26] gpio/omap: cleanup set_gpio_triggering function   Tony Lindgren
• [PATCH v7 12/26] gpio/omap: cleanup omap_gpio_mod_init function   Tony Lindgren
• [PATCH v7 13/26] gpio/omap: use pinctrl offset instead of macro   Tony Lindgren
• [PATCH] ARM: vexpress: initial device tree support   Grant Likely
• [RFC v2 PATCH 1/1] ASoC: soc-core: symmetry checking for each DAIs separately   Mark Brown
• [PATCH v7 13/26] gpio/omap: use pinctrl offset instead of macro   Tony Lindgren
• [PATCH v7 15/26] gpio/omap: remove bank->method & METHOD_* macros   Tony Lindgren
• [PATCH v7 16/26] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tony Lindgren
• [PATCH v7 26/26] gpio/omap: add dbclk aliases for all gpio modules   Tony Lindgren
• [PATCH v2 0/3] ARCH: CSR: basic PM suspend/resume support   Barry Song
• [PATCH v2 1/3] ARM: CSR: PM: save/restore timer status in suspend cycle   Barry Song
• [PATCH v2 2/3] ARM: CSR: PM: save/restore irq status in suspend cycle   Barry Song
• [PATCH v2 3/3] ARM: CSR: PM: add sleep entry for SiRFprimaII   Barry Song
• [PATCH 1/3] fixup! mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH 00/10] hwspinlock-next   Tony Lindgren
• [PATCH 00/10] hwspinlock-next   Tony Lindgren
• [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping   Santosh Shilimkar
• [GIT PULL] CSR prima2 PM support for 3.2   Barry Song
• [PATCH 1/3] fixup! mm: alloc_contig_freed_pages() added   Dave Hansen
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [PATCH 00/10] hwspinlock-next   Linus Walleij
• [PATCH] spi: Fix builderror in spi-pl022.c   Linus Walleij
• [PATCH 00/10] hwspinlock-next   Ohad Ben-Cohen
• [PATCH] ARM: vexpress: initial device tree support   Pawel Moll
• [PATCH v3 0/3] add fec support for imx6q   Shawn Guo
• [PATCH v3 1/3] net/fec: fec_reset_phy() does not need to always succeed   Shawn Guo
• [PATCH v3 2/3] net/fec: fix fec1 check in fec_enet_mii_init()   Shawn Guo
• [PATCH v3 3/3] net/fec: add imx6q enet support   Shawn Guo
• [PATCH 00/10] hwspinlock-next   Ohad Ben-Cohen
• [PATCH 04/10] hwspinlock/core/omap: fix id issues on multiple hwspinlock devices   Tony Lindgren
• [PATCH] ARM: tegra: Remove redundant change to the CPSR in headsmp.S   Colin Cross
• [PATCH 00/10] hwspinlock-next   Tony Lindgren
• [PATCH 00/10] hwspinlock-next   Ohad Ben-Cohen
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [PATCH 00/10] hwspinlock-next   Arnd Bergmann
• [PATCH] ARM: OMAP: voltage layer present, even when CONFIG_PM=n   Kevin Hilman
• [PATCH] gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler()   Grant Likely
• [PATCH 1/3] fixup! mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH] ARM: vexpress: initial device tree support   Pawel Moll
• [PATCH 1/3] fixup! mm: alloc_contig_freed_pages() added   Dave Hansen
• [PATCH] ARM: vexpress: initial device tree support   Rob Herring
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Kevin Hilman
• [PATCH 0/19] removal of mach/vmalloc.h and generic optimizations   Nicolas Pitre
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [PATCH 3/3] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping   Kevin Hilman
• [PATCH v2 0/3] Add support for TI814X processor series   Hemant Pedanekar
• [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support   Hemant Pedanekar
• [PATCH v2 2/3] TI814X: Add cpu type macros and detection support   Hemant Pedanekar
• [PATCH v2 3/3] TI814X: Create board support and enable build for TI8148 EVM   Hemant Pedanekar
• [PATCH] ARM: vexpress: initial device tree support   Mitch Bradley
• DT vs ARM static mappings   Nicolas Pitre
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [GIT PULL] OMAP: omap_device cleanup for v3.2   Tony Lindgren
• [PATCH 0/2] mmc: clarifications on host.post_req()   Chris Ball
• [GIT PULL] OMAP: omap_device cleanup for v3.2   Kevin Hilman
• [PATCH 0/2] mmc: clarifications on host.post_req()   Per Fridén Förlin
• [PATCH] mmc: sdhci-esdhc-imx: add basic imx6q usdhc support   Chris Ball
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Konrad Rzeszutek Wilk
• Git pull request: OMAP/Davinci debug-macro.S cleanups   Nicolas Pitre
• [PATCH 3/3] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 1/3] arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h   Stephen Warren
• [PATCH 2/3] arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h>   Stephen Warren
• [PATCH 3/3] arm/tegra: Move "gpio-names.h" into <mach/gpio-tegra.h>   Stephen Warren
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Stephen Warren
• [PATCH 1/2] drivers: create a pin control subsystem v7   Stephen Warren
• [PATCH 3/3] arm/tegra: Move "gpio-names.h" into <mach/gpio-tegra.h>   Olof Johansson
• [PATCH 1/3] arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h   Olof Johansson
• [PATCH 2/3] arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h>   Olof Johansson
• [PATCH 49/57] video: irq: Remove IRQF_DISABLED   David Brown
• [PATCH 3/3] ARM: gic: add OF based initialization   Cousson, Benoit
• [PATCH 3/3] arm/tegra: Move "gpio-names.h" into <mach/gpio-tegra.h>   Stephen Warren
• [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support   Tony Lindgren
• [PATCH v2 3/3] TI814X: Create board support and enable build for TI8148 EVM   Tony Lindgren
• [PATCH v2 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Kevin Hilman
• change_page_attr() implementation for ARM?   Vinod Rex
• [PATCH] arm/tegra: Harmony: Configure PMC for low-level interrupts   Stephen Warren
• Link failures due to __bug_table in current -next   Simon Glass
• Link failures due to __bug_table in current -next   Simon Glass
• [PATCH v2 3/3] ARM: CSR: PM: add sleep entry for SiRFprimaII   Barry Song
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Barry Song
• [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support   Pedanekar, Hemant
• [PATCH v2 3/3] TI814X: Create board support and enable build for TI8148 EVM   Pedanekar, Hemant
• [PATCH v16 10/12] OMAP: dmtimer: extend spinlock in request functions   Tony Lindgren
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Tony Lindgren
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver   Tony Lindgren
• [PATCH v16 08/12] OMAP: dmtimer: do remaining initialization in probe   Tony Lindgren
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support   Tony Lindgren
• [PATCH v16 12/12] OMAP: dmtimer: get rid of timer_ip_version field   Tony Lindgren
• [PATCH v16 01/12] OMAP2+: dmtimer: add device names to flck nodes   Tony Lindgren
• [PATCH v16 07/12] OMAP: dmtimer: add timeout to low-level routines   Tony Lindgren
• [PATCH v16 05/12] OMAP: dmtimer: switch-over to platform device driver   Tony Lindgren
• [PATCH v4] DRM: add DRM Driver for Samsung SoC EXYNOS4210.   Inki Dae
• [PATCH] ARM: futex: fix clobbering oldval   mhban
• [PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.   Wu, Josh
• [PATCH v3 1/2][media] Add code to enable/disable ISI_MCK clock.   Josh Wu
• [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board.   Josh Wu
• [PATCH v4 0/3] add fec support for imx6q   Shawn Guo
• [PATCH v4 1/3] net/fec: fec_reset_phy() does not need to always succeed   Shawn Guo
• [PATCH v4 2/3] net/fec: fix fec1 check in fec_enet_mii_init()   Shawn Guo
• [PATCH v4 3/3] net/fec: add imx6q enet support   Shawn Guo
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Jassi Brar
• [PATCH v16 07/12] OMAP: dmtimer: add timeout to low-level routines   DebBarma, Tarun Kanti
• [PATCH 8/8] OMAP4: Fix the emif and dmm virtual mapping   Shilimkar, Santosh
• [PATCH v3 0/2] Add TVOUT support for SMDKV310   Hatim Ali
• [PATCH v3 1/2] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Hatim Ali
• [RESEND PATCH 2/2] s5p-tv: Add PM_RUNTIME dependency   Hatim Ali
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Barry Song
• [PATCH v16 05/12] OMAP: dmtimer: switch-over to platform device driver   DebBarma, Tarun Kanti
• [PATCH v16 01/12] OMAP2+: dmtimer: add device names to flck nodes   DebBarma, Tarun Kanti
• [PATCH v16 10/12] OMAP: dmtimer: extend spinlock in request functions   DebBarma, Tarun Kanti
• [PATCH v16 08/12] OMAP: dmtimer: do remaining initialization in probe   DebBarma, Tarun Kanti
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support   DebBarma, Tarun Kanti
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver   DebBarma, Tarun Kanti
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Jassi Brar
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Barry Song
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Jassi Brar
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Barry Song
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Jon Medhurst (Tixy)
• parallel load of modules on an ARM multicore   George G. Davis
• [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board.   Guennadi Liakhovetski
• [PATCH v5 09/15] OMAP2+: UART: Add runtime pm support for omap-serial driver   Ming Lei
• [PATCH v5 09/15] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH 1/3] arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h   Russell King - ARM Linux
• [PATCH] dmaengine: delete redundant chan_id and chancnt initialization in dma drivers   Russell King - ARM Linux
• [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Deepthi Dharwar
• [RFC PATCH V6 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state   Deepthi Dharwar
• [RFC PATCH V6 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Deepthi Dharwar
• [RFC PATCH V6 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields   Deepthi Dharwar
• [RFC PATCH V6 4/4] cpuidle: Single/Global registration of idle states   Deepthi Dharwar
• parallel load of modules on an ARM multicore   Catalin Marinas
• [PATCH 24/55] SCSI: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 30/55] dmaengine: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 32/55] i2c: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 46/55] rtc: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 49/55] video: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 51/55] watchdog: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 53/55] sound: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Hector Oron
• [PATCH] ARM i.MX avic: convert to use generic irq chip   Hui Wang
• [PATCH 53/57] sound: irq: Remove IRQF_DISABLED   Takashi Iwai
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Catalin Marinas
• [RESEND PATCH 2/2] s5p-tv: Add PM_RUNTIME dependency   Marek Szyprowski
• [PATCH] clk: provide prepare/unprepare functions   Russell King - ARM Linux
• [PATCH 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [PATCH 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [V8 PATCH 0/5] imx53 ahci driver v8   Richard Zhu
• [V8 PATCH 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
• [V8 PATCH 2/5] ahci_plt Add the board_ids and pi refer to different features   Richard Zhu
• [V8 PATCH 3/5] MX53 Enable the AHCI SATA on MX53 ARD board   Richard Zhu
• [V8 PATCH 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board   Richard Zhu
• [V8 PATCH 5/5] MX53 Enable the AHCI SATA on MX53 SMD board   Richard Zhu
• [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin   Igor Grinberg
• [V8 PATCH 5/5] MX53 Enable the AHCI SATA on MX53 SMD board   Fabio Estevam
• booting single uImage on platforms with different base addresses for SDRAM   Peter De Schrijver
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Jon Medhurst (Tixy)
• booting single uImage on platforms with different base addresses for SDRAM   Russell King - ARM Linux
• [GIT PULL] ux500-core for 3.2   Linus Walleij
• [GIT PULL] ux500-core for 3.2   Arnd Bergmann
• [V8 PATCH 5/5] MX53 Enable the AHCI SATA on MX53 SMD board   Sergei Shtylyov
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Catalin Marinas
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Jon Medhurst (Tixy)
• [PATCH 1/2] ARM: mach-ux500: enable fix for ARM errata 754322   Linus Walleij
• [PATCH 2/2] ARM: mach-ux500: unlock I&D l2x0 caches before init   Linus Walleij
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Eric Miao
• [PATCH] ARM: vexpress: initial device tree support   Dave Martin
• [PATCH 5/5] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [GIT PULL] ux500-fixes for v3.1   Linus Walleij
• booting single uImage on platforms with different base addresses for SDRAM   Nicolas Pitre
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Catalin Marinas
• DT vs ARM static mappings   Pawel Moll
• DT vs ARM static mappings   Russell King - ARM Linux
• [PATCH] arm: Add unwinding annotations for 64bit division functions   Jon Medhurst (Tixy)
• [PATCH v4 0/3] AM3517: Booting up   Abhilash K V
• [PATCH v4 1/3] AM35x: Using OMAP3 generic hwmods   Abhilash K V
• [PATCH v4 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices   Abhilash K V
• [PATCH v4 3/3] OMAP2+: voltage: add check for missing PMIC info in vp init   Abhilash K V
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Peter De Schrijver
• [PATCH v3 0/3] AM35x: Adding PM init   Abhilash K V
• [PATCH v3 1/3] AM35x: voltage: Basic initialization   Abhilash K V
• [PATCH v3 2/3] OMAP3: Add support for TPS65023 (AM35x only)   Abhilash K V
• [PATCH v3 3/3] OMAP3: Remove auto-selection of PMICs   Abhilash K V
• DT vs ARM static mappings   Pawel Moll
• [PATCH 0/7] Ux500 timer patches for 3.2   Linus Walleij
• [PATCH 1/7] ARM: plat-nomadik: MTU sched_clock as an option   Linus Walleij
• [PATCH 2/7] clocksource: add DBX500 PRCMU Timer support   Linus Walleij
• [PATCH 3/7] ARM: ux500: add support for clocksource DBX500 PRCMU   Linus Walleij
• [PATCH 4/7] ARM: ux500: Move timer code to separate file   Linus Walleij
• [PATCH 5/7] ARM: plat-nomadik: timer: Add support for periodic timers   Linus Walleij
• [PATCH 6/7] ARM: plat-nomadik: timer: Export reset functions   Linus Walleij
• [PATCH 7/7] ARM: ux500: Reprogram timers upon resume   Linus Walleij
• [PATCH] ARM i.MX avic: convert to use generic irq chip   Shawn Guo
• Samsung GPIO changes break boot on Cragganmore   Mark Brown
• booting single uImage on platforms with different base addresses for SDRAM   Wolfgang Denk
• [PATCH 6/7] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH] ARM: platform fixups: remove mdesc argument to fixup function   Russell King - ARM Linux
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Arnd Bergmann
• [PATCH REPOST 1/2] arm/dt: Tegra: Update SDHCI nodes to match bindings   Arnd Bergmann
• [PATCH v2 2/2] ARM: smp_scu: remove __init annotation from scu_enable()   Shawn Guo
• [GIT PULL] CSR prima2 PM support for 3.2   Arnd Bergmann
• [PATCH v2 3/3] ARM: CSR: PM: add sleep entry for SiRFprimaII   Arnd Bergmann
• [V8 PATCH 5/5] MX53 Enable the AHCI SATA on MX53 SMD board   Richard Zhu
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH] i2c/tegra: I2C driver uses the suspend_noirq/resume_noirq   Arnd Bergmann
• [RFC] Shrink sched_clock some more   Russell King - ARM Linux
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Kevin Hilman
• DT vs ARM static mappings   Pawel Moll
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Stephen Warren
• [PATCH 1/3] arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h   Stephen Warren
• [PATCH 1/3] arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h   Russell King - ARM Linux
• [GIT PULL] OMAP: omap_device cleanup for v3.2   Kevin Hilman
• [PATCH 2/3] arm/tegra: add support for ventana pinmuxing   Stephen Warren
• [PATCH for 3.1] ARM: at91: add PWM driver selector in Kconfig for 9g45 family   Nicolas Ferre
• [PATCH for 3.1] ARM: at91: add defconfig for at91sam9g45 family   Nicolas Ferre
• [PATCH 1/3] arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h   Grant Likely
• [PATCH 2/3] arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h>   Grant Likely
• [PATCH] ARM: futex: fix clobbering oldval   Will Deacon
• [PATCH v3 1/4] ARM: mx53: Change pad configs for flexcan pins   Rogerio Pimentel
• [PATCH v3 2/4] ARM: mx53: Add clock for flexcan   Rogerio Pimentel
• [PATCH v3 3/4] ARM: mx53: Add resources for flexcan   Rogerio Pimentel
• [PATCH v3 4/4] ARM: mx53_ard: Add flexcan support   Rogerio Pimentel
• [PATCH v3 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Grant Likely
• [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Arjan van de Ven
• [PATCH] ARM: platform fixups: remove mdesc argument to fixup function   Nicolas Pitre
• [PATCH] clk: provide prepare/unprepare functions   Saravana Kannan
• [PATCH v3 2/2] input: samsung-keypad: Add device tree support   Grant Likely
• [PATCH v2] i2c-tegra: Use the suspend_noirq/resume_noirq not suspend/resume   Stephen Warren
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Peter De Schrijver
• [PATCH] ARM: S3C64xx: Add LDOVDD supply for CODEC on Cragganmore   Mark Brown
• [PATCH v2] i2c-tegra: Use the suspend_noirq/resume_noirq not suspend/resume   Grant Likely
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Colin Cross
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Jeff Garzik
• [PATCH v2] i2c-tegra: Use the suspend_noirq/resume_noirq not suspend/resume   Mark Brown
• [RFC] Shrink sched_clock some more   Nicolas Pitre
• Identifying Primecells   jonsmirl at gmail.com
• [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support   Tony Lindgren
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Anton Vorontsov
• [PATCH] ARM: futex: preserve oldval in SMP __futex_atomic_op   Will Deacon
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Joe Perches
• [PATCH] ARM: futex: preserve oldval in SMP __futex_atomic_op   Nicolas Pitre
• [PATCH v4 1/3] AM35x: Using OMAP3 generic hwmods   Paul Walmsley
• [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Jean Pihet
• [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Kevin Hilman
• [PATCH] ARM: Don't include mach-nuc93x/Kconfig   Stephen Warren
• [PATCH] ARM: Don't include mach-nuc93x/Kconfig   Nicolas Pitre
• [PATCH] ARM: futex: preserve oldval in SMP __futex_atomic_op   Will Deacon
• [PATCH][RESEND] ARM: cache: detect PIPT I-cache using CTR   Will Deacon
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Alan Cox
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH v3 0/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Benoit Cousson
• [PATCH v3 1/2] OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration   Benoit Cousson
• [PATCH v3 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Benoit Cousson
• [PATCH][RESEND] ARM: cache: detect PIPT I-cache using CTR   Russell King - ARM Linux
• [PATCH 0/4] arm/tegra: Convert gpio & pinmux to platform devices   Stephen Warren
• [PATCH 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs   Stephen Warren
• [PATCH 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi   Stephen Warren
• [PATCH 3/4] gpio/tegra: Convert to a platform device   Stephen Warren
• [PATCH 4/4] arm/tegra: Convert pinmux driver to a platform device   Stephen Warren
• [PATCH 00/10] cpufreq: OMAP: move into drivers, cleanups/fixes for v3.2   Kevin Hilman
• [PATCH 01/10] cpufreq: OMAP: cleanup for multi-SoC support, move into drivers/cpufreq   Kevin Hilman
• [PATCH 02/10] cpufreq: OMAP: Add SMP support for OMAP4+   Kevin Hilman
• [PATCH 03/10] cpufreq: OMAP: Enable all CPUs in shared policy mask   Kevin Hilman
• [PATCH 04/10] cpufreq: OMAP: notify even with bad boot frequency   Kevin Hilman
• [PATCH 05/10] cpufreq: OMAP: move clk name decision to init   Kevin Hilman
• [PATCH 06/10] cpufreq: OMAP: deny initialization if no mpudev   Kevin Hilman
• [PATCH 07/10] cpufreq: OMAP: dont support !freq_table   Kevin Hilman
• [PATCH 08/10] cpufreq: OMAP: only supports OPP library   Kevin Hilman
• [PATCH 09/10] cpufreq: OMAP: put clk if cpu_init failed   Kevin Hilman
• [PATCH 10/10] cpufreq: OMAP: fix freq_table leak   Kevin Hilman
• [PATCH] S3C2443: Fix bit-reset in setrate of clk_armdiv   Heiko Stübner
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH v4 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices   Kevin Hilman
• [PATCH v4 3/3] OMAP2+: voltage: add check for missing PMIC info in vp init   Kevin Hilman
• [PATCH 01/10] cpufreq: OMAP: cleanup for multi-SoC support, move into drivers/cpufreq   Tony Lindgren
• [PATCH v2] AM3517 : support for suspend/resume   Kevin Hilman
• [PATCH v3 3/3] OMAP3: Remove auto-selection of PMICs   Kevin Hilman
• [PATCH v3 3/3] OMAP3: Remove auto-selection of PMICs   Tony Lindgren
• [PATCH v2 0/7] Add a generic struct clk   Mike Turquette
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Mike Turquette
• [PATCH v2 2/7] clk: Implement clk_set_rate   Mike Turquette
• [PATCH v2 3/7] clk: Add fixed-rate clock   Mike Turquette
• [PATCH v2 4/7] clk: Add simple gated clock   Mike Turquette
• [PATCH v2 5/7] clk: Add Kconfig option to build all generic clk drivers   Mike Turquette
• [PATCH v2 6/7] clk: Add initial WM831x clock driver   Mike Turquette
• [PATCH v2 7/7] x86: Enable generic clk API on x86   Mike Turquette
• [PATCH v3 1/3] AM35x: voltage: Basic initialization   Kevin Hilman
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Alan Cox
• [PATCH v2] gpio: pl061: add DT binding support   Rob Herring
• [PATCH 02/10] cpufreq: OMAP: Add SMP support for OMAP4+   Kevin Hilman
• [PATCH v2 0/7] Add a generic struct clk   Turquette, Mike
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH] ARM: futex: fix clobbering oldval   mhban
• [PATCH v2 1/3] TI81XX: Prepare for addition of TI814X support   Pedanekar, Hemant
• [PATCH 24/55] SCSI: irq: Remove IRQF_DISABLED   Jack Wang
• [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v3] of/irq: introduce of_irq_init   Rob Herring
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Barry Song
• [PATCH 15/19] plat-pxa: break out GPIO driver specifics   Haojian Zhuang
• [PATCHv2 3/3] picoxcell: add the DTS for the PC7302 board   Benjamin Herrenschmidt
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH v3] of/irq: introduce of_irq_init   Grant Likely
• [PATCH 0/4] ARM: CSR: cleanup some minor coding-style issues   Barry Song
• [PATCH 1/4] ARM: CSR: timer: do not initialise statics to 0 or NULL   Barry Song
• [PATCH 2/4] ARM: CSR: timer: space required before the open parenthesis '('   Barry Song
• [PATCH 3/4] ARM: CSR: prima2: fix trailing whitespace   Barry Song
• [PATCH 4/4] ARM: CSR: clock: Fix indentation   Barry Song
• [V3 4/4] ARM: mmp: support emmc on dkb board   Haojian Zhuang
• [RFC] Shrink sched_clock some more   Kyungmin Park
• [PATCH] arm/mxs: PHYS_OFFSET can not be defined in platform any longer   Shawn Guo
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Russell King - ARM Linux
• [PATCH] ARM: futex: fix clobbering oldval   Will Deacon
• [GIT PULL] CPU PM notifiers and ARM driver PM updates for v3.2.   Santosh Shilimkar
• [RFC] Shrink sched_clock some more   Marc Zyngier
• [PATCH] ARM i.MX avic: convert to use generic irq chip   Hui Wang
• [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Hector Oron
• change_page_attr() implementation for ARM?   Catalin Marinas
• [correction] [PATCH 09/12] OMAP: dmtimer: low-power mode support   Tarun Kanti DebBarma
• [PATCH 01/10] cpufreq: OMAP: cleanup for multi-SoC support,move into drivers/cpufreq   Vishwanath Sripathy
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver   DebBarma, Tarun Kanti
• [RFC PATCH V6 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Deepthi Dharwar
• [PATCH 4/5] ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and YUYV8_2X8 formats   Ravi, Deepthy
• [PATCH 0/7]: ARM: SAMSUNG: Add SPI clkdev support   Padmavathi Venna
• [PATCH 1/7] SPI: S3C64XX: Use bus clocks created using clkdev   Padmavathi Venna
• [PATCH 2/7] ARM: SAMSUNG: Add CLK Macro for clkdev support   Padmavathi Venna
• [PATCH 3/7] ARM: S3C64XX: Add SPI clkdev support   Padmavathi Venna
• [PATCH 4/7] ARM: S5PC100: Add SPI clkdev support   Padmavathi Venna
• [PATCH 5/7] ARM: S5P64X0: Add SPI clkdev support   Padmavathi Venna
• [PATCH 6/7] ARM: S5PV210: Add SPI clkdev support   Padmavathi Venna
• [PATCH 7/7] ARM: SAMSUNG: Remove SPI bus clocks from platform data   Padmavathi Venna
• I-cache/D-cache inconsistency issue with page cache   Mike Hommey
• [PATCH 0/3] iommu/exynos: Add iommu driver for Exynos4 SoCs   KyongHo Cho
• [PATCH 1/3] ARM: EXYNOS4: Change System MMU device definition   KyongHo Cho
• [PATCH 2/3] ARM: S5P: Remove system MMU driver from arm/plat-s5p   KyongHo Cho
• [PATCH 3/3] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH v5 0/3] add fec support for imx6q   Shawn Guo
• [PATCH v5 1/3] net/fec: fec_reset_phy() does not need to always succeed   Shawn Guo
• [PATCH v5 2/3] net/fec: fix fec1 check in fec_enet_mii_init()   Shawn Guo
• [PATCH v5 3/3] net/fec: add imx6q enet support   Shawn Guo
• [PATCH v3 1/3] AM35x: voltage: Basic initialization   Koyamangalath, Abhilash
• [PATCHv9 00/18] omap PRCM chain handler   Tero Kristo
• [PATCHv9 01/18] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Tero Kristo
• [PATCHv9 02/18] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Tero Kristo
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Tero Kristo
• [PATCHv9 04/18] TEMP: OMAP4xxx: hwmod data: add PRM hwmod   Tero Kristo
• [PATCHv9 05/18] mfd: omap-prm: add driver skeleton   Tero Kristo
• [PATCHv9 06/18] mfd: omap-prm: added chain interrupt handler   Tero Kristo
• [PATCHv9 07/18] mfd: omap-prm: added suspend prepare and complete callbacks   Tero Kristo
• [PATCHv9 08/18] OMAP2+: mux: add support for PAD wakeup interrupts   Tero Kristo
• [PATCHv9 09/18] omap3: pm: use prcm chain handler   Tero Kristo
• [PATCHv9 10/18] OMAP3: pm: do not enable PRCM MPU interrupts manually   Tero Kristo
• [PATCHv9 11/18] omap3+: add omap prm driver initialization   Tero Kristo
• [PATCHv9 12/18] TEMP: serial: added mux support   Tero Kristo
• [PATCHv9 13/18] TEMP: 4430sdp: use common serial init with mux support   Tero Kristo
• [PATCHv9 14/18] TEMP: mux: added trace for io wkup event   Tero Kristo
• [PATCHv9 15/18] TEMP: OMAP3: pm: remove serial resume / idle calls from idle path   Tero Kristo
• [PATCHv9 16/18] TEMP: OMAP3: serial: made serial to work properly with PRCM chain handler   Tero Kristo
• [PATCHv9 17/18] TEMP: OMAP: serial: remove padconf hacks   Tero Kristo
• [PATCHv9 18/18] TEMP: OMAP device: change pr_warnings to pr_debugs   Tero Kristo
• Identifying Primecells   Rob Herring
• [PATCH v4 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices   Koyamangalath, Abhilash
• Identifying Primecells   jonsmirl at gmail.com
• [PATCH v2] AM3517 : support for suspend/resume   Koyamangalath, Abhilash
• Identifying Primecells   Rob Herring
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Nicolas Pitre
• Identifying Primecells   jonsmirl at gmail.com
• [PATCH 01/10] cpufreq: OMAP: cleanup for multi-SoC support, move into drivers/cpufreq   Kevin Hilman
• Identifying Primecells   Pawel Moll
• Identifying Primecells   jonsmirl at gmail.com
• Identifying Primecells   jonsmirl at gmail.com
• Identifying Primecells   Pawel Moll
• [PATCH] ARM i.MX avic: convert to use generic irq chip   Sascha Hauer
• DT vs ARM static mappings   Arnd Bergmann
• [PATCH v2] ARM: OMAP2+: clock: cleanup CPUfreq leftovers   Kevin Hilman
• [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts   Marc Zyngier
• [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [PATCH v3 2/3] ARM: gic: consolidate PPI handling   Marc Zyngier
• [PATCH v3 3/3] ARM: gic, local timers: use the request_percpu_irq() interface   Marc Zyngier
• [PATCH v2] AM3517 : support for suspend/resume   Kevin Hilman
• [PATCH 0/4] arm/tegra: Convert gpio & pinmux to platform devices   Arnd Bergmann
• [RFC PATCH 00/14] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 01/14] ARM: GIC: Add global gic_handle_irq() function   Marc Zyngier
• [RFC PATCH 02/14] ARM: RealView: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 03/14] ARM: VExpress: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 04/14] ARM: msm: convert SMP platforms to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 05/14] ARM: GIC: Add global gic_handle_irq_offset() function   Marc Zyngier
• [RFC PATCH 06/14] ARM: exynos4: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 07/14] ARM: tegra2: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 08/14] ARM: ux500: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 09/14] ARM: shmobile: convert smp platforms to gic_handle_irq()   Marc Zyngier
• [RFC PATCH 10/14] ARM: cns3xxx: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 11/14] ARM: zynq: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 12/14] ARM: omap2/3: Add global omap2/3_intc_handle_irq() functions   Marc Zyngier
• [RFC PATCH 13/14] ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 14/14] ARM: GIC: Make MULTI_IRQ_HANDLER mandatory   Marc Zyngier
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   David Daney
• [PATCH] ARM i.MX gic: add handle_irq function   Shawn Guo
• [PATCH for 3.1] ARM: at91: add defconfig for at91sam9g45 family   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH for 3.1] ARM: at91: add PWM driver selector in Kconfig for 9g45 family   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] i.MX: use CONFIG_MULTI_IRQ_HANDLER   Shawn Guo
• [PATCH 2/4] ARM i.MX tzic: add handle_irq function   Shawn Guo
• [PATCH] ARM: localtimer: add header linux/errno.h explicitly   Shawn Guo
• [RFC PATCH 07/14] ARM: tegra2: convert to CONFIG_MULTI_IRQ_HANDLER   Stephen Warren
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Valdis.Kletnieks at vt.edu
• [PATCH v5 0/3] add fec support for imx6q   David Miller
• [PATCH v3 1/3] AM35x: voltage: Basic initialization   Kevin Hilman
• Identifying Primecells   jonsmirl at gmail.com
• I-cache/D-cache inconsistency issue with page cache   Russell King - ARM Linux
• Identifying Primecells   Russell King - ARM Linux
• [RFC PATCH 01/14] ARM: GIC: Add global gic_handle_irq() function   Russell King - ARM Linux
• [PATCH 00/11] OMAP: Add initial support for DT on OMAP3 & OMAP4   Benoit Cousson
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Benoit Cousson
• [PATCH 02/11] arm/dts: Add initial device tree support for OMAP4 SoC   Benoit Cousson
• [PATCH 03/11] arm/dts: Add support for OMAP4 PandaBoard   Benoit Cousson
• [PATCH 04/11] arm/dts: Add support for OMAP4 SDP board   Benoit Cousson
• [PATCH 05/11] arm/dts: Add initial device tree support for OMAP3 SoC   Benoit Cousson
• [PATCH 06/11] arm/dts: Add support for OMAP3 Beagle board   Benoit Cousson
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Benoit Cousson
• [PATCH 08/11] OMAP2+: board-generic: Add i2c static init   Benoit Cousson
• [PATCH 09/11] OMAP2+: l3-noc: Add support for device-tree   Benoit Cousson
• [PATCH 10/11] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Benoit Cousson
• [PATCH 11/11] arm/dts: OMAP3+: Add mpu, dsp and iva nodes   Benoit Cousson
• [PATCH 2/7] ARM: SAMSUNG: Add CLK Macro for clkdev support   Russell King - ARM Linux
• [RFC] Shrink sched_clock some more   Russell King - ARM Linux
• [PATCH v2 2/2] ARM: smp_scu: remove __init annotation from scu_enable()   Russell King - ARM Linux
• [RFC PATCH 11/14] ARM: zynq: convert to CONFIG_MULTI_IRQ_HANDLER   John Linn
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Russell King - ARM Linux
• [GIT PULL] omap cleanup part2 for v3.2 merge window   Tony Lindgren
• [PATCHv9 00/18] omap PRCM chain handler   Valdis.Kletnieks at vt.edu
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Tony Lindgren
• [PATCH 10/11] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Tony Lindgren
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Tony Lindgren
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Simon Glass
• [RFC PATCH 1/3] bootstage: Add bootstages to record timing in the kernel.   Simon Glass
• [RFC PATCH 2/3] bootstage: Insert bootstage_mark to record timing for bootup.   Simon Glass
• [RFC PATCH 3/3] bootstage: Get u-boot timing from the device tree.   Simon Glass
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Tony Lindgren
• [PATCH 08/11] OMAP2+: board-generic: Add i2c static init   Tony Lindgren
• [PATCH 1/7] SPI: S3C64XX: Use bus clocks created using clkdev   Grant Likely
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 03/11] arm/dts: Add support for OMAP4 PandaBoard   Grant Likely
• [PATCH 11/11] arm/dts: OMAP3+: Add mpu, dsp and iva nodes   Grant Likely
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Valdis.Kletnieks at vt.edu
• [PATCH 08/11] OMAP2+: board-generic: Add i2c static init   Grant Likely
• [PATCH 0/4] iommu/exynos: Add IOMMU and Enhance System MMU for Exynos4   KyongHo Cho
• [PATCH 1/4] ARM: EXYNOS4: Change System MMU device definition   KyongHo Cho
• [PATCH 2/4] ARM: S5P: Remove system MMU driver from arm/plat-s5p   KyongHo Cho
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH 4/4] iommu/exynos: Use bus_set_iommu instead of register_iommu   KyongHo Cho
• [PATCH 0/4] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   KyongHo Cho
• [PATCH 1/4] ARM: EXYNOS4: Change System MMU device definition   KyongHo Cho
• [PATCH 2/4] ARM: S5P: Remove system MMU driver from arm/plat-s5p   KyongHo Cho
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH 4/4] iommu/exynos: Use bus_set_iommu instead of register_iommu   KyongHo Cho
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Simon Glass
• [PATCHv9 00/18] omap PRCM chain handler   Sripathy, Vishwanath
• [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv9 00/18] omap PRCM chain handler   Valdis.Kletnieks at vt.edu
• [PATCH 0/8] OMAP3/4: Misc fixes and clean-up   Santosh Shilimkar
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Santosh Shilimkar
• [PATCH v2 01/24] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit   Santosh Shilimkar
• [PATCH v2 02/24] OMAP4: Export omap4_get_base*() rather than global address pointers   Santosh Shilimkar
• [PATCH v2 03/24] OMAP4: PM: Add SAR RAM support   Santosh Shilimkar
• [PATCH v2 04/24] OMAP4: PM: Keep static dep between MPUSS-EMIF and MPUSS-L3/L4 and DUCATI-L3   Santosh Shilimkar
• [PATCH v2 05/24] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0   Santosh Shilimkar
• [PATCH v2 06/24] OMAP4: PM: Initialise all the clockdomains to supported states   Santosh Shilimkar
• [PATCH v2 07/24] OMAP: Add Secure HAL and monitor mode API infrastructure.   Santosh Shilimkar
• [PATCH v2 08/24] OMAP: PM: Add support to allocate the memory for secure RAM   Santosh Shilimkar
• [PATCH v2 09/24] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn   Santosh Shilimkar
• [PATCH v2 10/24] OMAP4: PM: Add CPUX OFF mode support   Santosh Shilimkar
• [PATCH v2 11/24] OMAP4: Remove __INIT from omap_secondary_startup() to re-use it for hotplug.   Santosh Shilimkar
• [PATCH v2 12/24] OMAP4: PM: Program CPU1 to hit OFF when off-lined   Santosh Shilimkar
• [PATCH v2 13/24] OMAP4: PM: CPU1 wakeup workaround from Low power modes   Santosh Shilimkar
• [PATCH v2 14/24] OMAP4: PM: Use custom omap_do_wfi() for default idle.   Santosh Shilimkar
• [PATCH v2 15/24] OMAP4: suspend: Add MPUSS power domain RETENTION support   Santosh Shilimkar
• [PATCH v2 16/24] OMAP4: Remove un-used do_wfi() macro.   Santosh Shilimkar
• [PATCH v2 17/24] OMAP4: PM: Add WakeupGen and secure GIC low power support   Santosh Shilimkar
• [PATCH v2 18/24] OMAP4: PM: Add L2X0 cache lowpower support   Santosh Shilimkar
• [PATCH v2 19/24] OMAP4: PM: Add MPUSS power domain OSWR support   Santosh Shilimkar
• [PATCH v2 20/24] OMAP4: PM: Add power domain statistics support   Santosh Shilimkar
• [PATCH v2 21/24] OMAP4: PM: Add CPUidle support   Santosh Shilimkar
• [PATCH v2 22/24] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.   Santosh Shilimkar
• [PATCH v2 23/24] OMAP3: CPUidle: Make use of CPU PM notifiers   Santosh Shilimkar
• [PATCH v2 24/24] OMAP4: Fix errata i688 with MPU interconnect barriers.   Santosh Shilimkar
• [PATCH 0/8] OMAP3/4: Misc fixes and clean-up   Paul Walmsley
• [PATCH 0/8] OMAP3/4: Misc fixes and clean-up   Santosh Shilimkar
• [PATCH 0/4] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   조경호
• [PATCH 1/4] ARM: EXYNOS4: Change System MMU device definition   조경호
• [PATCH 2/4] ARM: S5P: Remove system MMU driver from arm/plat-s5p   조경호
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   조경호
• [PATCH 4/4] iommu/exynos: Use bus_set_iommu instead of register_iommu   조경호
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   조경호
• [PATCH 4/4] iommu/exynos: Use bus_set_iommu instead of register_iommu   조경호
• [PATCH 0/8] OMAP3/4: Misc fixes and clean-up   Paul Walmsley
• [PATCH 0/4] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   KyongHo Cho
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH 0/8] OMAP3/4: Misc fixes and clean-up   Santosh Shilimkar
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   jiaweiwei
• [PATCH] gpio/omap: fix debounce clock handling   Tarun Kanti DebBarma
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Per Forlin
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Russell King - ARM Linux
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Mika Westerberg
• [GIT PULL] OMAP: Few sparse/bug fixes and clean-up for 3.2   Santosh Shilimkar
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Russell King - ARM Linux
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   Santosh Shilimkar
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Per Förlin
• I-cache/D-cache inconsistency issue with page cache   Mike Hommey
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   Russell King - ARM Linux
• I-cache/D-cache inconsistency issue with page cache   Russell King - ARM Linux
• I-cache/D-cache inconsistency issue with page cache   Mike Hommey
• I-cache/D-cache inconsistency issue with page cache   Russell King - ARM Linux
• I-cache/D-cache inconsistency issue with page cache   Siarhei Siamashka
• [PATCH v2 2/2] ARM: smp_scu: remove __init annotation from scu_enable()   Russell King - ARM Linux
• [PATCH v2 2/2] ARM: smp_scu: remove __init annotation from scu_enable()   Shawn Guo
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Will Deacon
• [PATCH 32/55] i2c: irq: Remove IRQF_DISABLED   Jean Delvare
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Per Förlin
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Russell King - ARM Linux
• Identifying Primecells   Linus Walleij
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Simon Glass
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Sylwester Nawrocki
• Identifying Primecells   Vitaly Wool
• Identifying Primecells   jonsmirl at gmail.com
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Grant Likely
• [PATCH v2 4/7] clk: Add simple gated clock   Grant Likely
• [PATCH v2 6/7] clk: Add initial WM831x clock driver   Grant Likely
• [PATCH v2 0/7] Add a generic struct clk   Grant Likely
• [PATCH v3 3/6] iommu/msm: announce supported page sizes   David Brown
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Turquette, Mike
• [PATCH v2 4/7] clk: Add simple gated clock   Turquette, Mike
• [PATCH v2 6/7] clk: Add initial WM831x clock driver   Turquette, Mike
• I-cache/D-cache inconsistency issue with page cache   Catalin Marinas
• I-cache/D-cache inconsistency issue with page cache   Russell King - ARM Linux
• [RFC 0/5] OMAP groundwork for IOMMU-based DMA API   Ohad Ben-Cohen
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Bjorn Helgaas
• [RFC PATCH 2/3] bootstage: Insert bootstage_mark to record timing for bootup.   Bjorn Helgaas
• I-cache/D-cache inconsistency issue with page cache   Catalin Marinas
• I-cache/D-cache inconsistency issue with page cache   Russell King - ARM Linux
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Abhijeet Dharmapurikar
• [RFC PATCH 1/3] genirq: add support for per-cpu dev_id interrupts   Abhijeet Dharmapurikar
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   Wanlong Gao
• [PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions   Barry Song
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH 1/2] ARM: pxa: fix building error by palm27x_lcd_init() when FB_PXA not defined   Eric Miao
• [PATCH 2/2] ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available   Eric Miao
• [PATCH v2 1/3] ARM: imx: Add imx cpuidle driver   Rob Lee
• Samsung GPIO changes break boot on Cragganmore   Kukjin Kim
• [PATCH] S3C2443: Fix bit-reset in setrate of clk_armdiv   Kukjin Kim
• [PATCH] ARM: S3C64xx: Add LDOVDD supply for CODEC on Cragganmore   Kukjin Kim
• [PATCH 0/4 v2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   KyongHo Cho
• [PATCH 1/4 v2] ARM: EXYNOS4: Change System MMU device definition   KyongHo Cho
• [PATCH 2/4 v2] ARM: S5P: Remove system MMU driver from arm/plat-s5p   KyongHo Cho
• [PATCH 3/4 v2] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH 4/4 v2] iommu/exynos: Use bus_set_iommu instead of register_iommu   KyongHo Cho
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH] dma/imx-sdma+imx-dma: explicitly #include <linux/module.h>   Uwe Kleine-König
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Rajendra Nayak
• [PATCH] ARM: imx/mx31moboard: use mc13xxx structs instead of removed mc13783 structs   Uwe Kleine-König
• [PATCH v3 0/6] add initial imx6q support   Shawn Guo
• [PATCH v3 1/6] arm/imx6q: add device tree source   Shawn Guo
• [PATCH v3 2/6] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH v3 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH v3 5/6] arm/imx6q: add device tree machine support   Shawn Guo
• [PATCH v3 6/6] arm/imx6q: add suspend/resume support   Shawn Guo
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Amit Kachhap
• [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH resend 00/13] McBSP cleanup and generalization   Jarkko Nikula
• [PATCH resend 01/13] omap: mcbsp: Remove unused variables from platform data   Jarkko Nikula
• [PATCH resend 02/13] omap: mcbsp: Move out omap_mcbsp_register_board_cfg from plat-omap/devices.c   Jarkko Nikula
• [PATCH resend 03/13] omap: mcbsp: Implement generic register access   Jarkko Nikula
• [PATCH resend 04/13] omap: mcbsp: Make wakeup control generic   Jarkko Nikula
• [PATCH resend 05/13] omap: mcbsp: Make tranceiver configuration control register access generic   Jarkko Nikula
• [PATCH resend 06/13] omap: mcbsp: Make threshold based transfer code generic   Jarkko Nikula
• [PATCH resend 07/13] omap: mcbsp: Use per instance register cache size   Jarkko Nikula
• [PATCH resend 08/13] omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c   Jarkko Nikula
• [PATCH resend 09/13] omap: mcbsp: Cleanup sidetone control initialization and make it generic   Jarkko Nikula
• [PATCH resend 10/13] omap: mcbsp: Update mcbsp.h include dependencies   Jarkko Nikula
• [PATCH resend 11/13] omap: mcbsp: Move address definitions to arch/arm/mach-omap1/mcbsp.c   Jarkko Nikula
• [PATCH resend 12/13] omap: mcbsp: Start generalize omap2_mcbsp_set_clks_src   Jarkko Nikula
• [PATCH resend 13/13] omap: mcbsp: Start generalize signal muxing functions   Jarkko Nikula
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Matthieu CASTET
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   Ohad Ben-Cohen
• [PATCH] mmc: card: modify mmc_getgeo function   Uwe Kleine-König
• [PATCH] ARM i.MX gic: add handle_irq function   Sascha Hauer
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH 1/2] ARM: pxa: fix building error by palm27x_lcd_init() when FB_PXA not defined   Marek Vasut
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Cousson, Benoit
• [PATCH 1/2] ARM: pxa: fix building error by palm27x_lcd_init() when FB_PXA not defined   Eric Miao
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   Ohad Ben-Cohen
• [PATCH 1/2] ARM: pxa: fix building error by palm27x_lcd_init() when FB_PXA not defined   Marek Vasut
• [PATCHv2 0/3] Initial support for Picochip picoxcell   Jamie Iles
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH-V3 0/4] Introducing TI's New SoC/board AM335XEVM   Hiremath, Vaibhav
• [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board.   Nicolas Ferre
• [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board.   Guennadi Liakhovetski
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   Ohad Ben-Cohen
• [PATCH v2 6/7] clk: Add initial WM831x clock driver   Mark Brown
• [PATCH v2] i.MX: use CONFIG_MULTI_IRQ_HANDLER   Sascha Hauer
• [PATCH 1/4] ARM i.MX avic: add handle_irq function   Sascha Hauer
• [PATCH 2/4] ARM i.MX tzic: add handle_irq function   Sascha Hauer
• [PATCH 3/4] ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER   Sascha Hauer
• [PATCH 4/4] ARM i.MX entry-macro.S: remove now unused code   Sascha Hauer
• [PATCH 1/2] ARM: pxa: fix building error by palm27x_lcd_init() when FB_PXA not defined   Marek Vasut
• [PATCH v3 3/3] OMAP3: Remove auto-selection of PMICs   Samuel Ortiz
• [PATCH 0/4 v2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   KyongHo Cho
• [PATCH 1/4 v2] ARM: EXYNOS4: Change System MMU device definition   KyongHo Cho
• [PATCH] ARM: imx/mx31moboard: use mc13xxx structs instead of removed mc13783 structs   Samuel Ortiz
• [PATCH 3/8] tvp514x: Migrate to media-controller framework   Hans Verkuil
• [PATCH 0/4 v2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   KyongHo Cho
• [RFC PATCH 01/14] ARM: GIC: Add global gic_handle_irq() function   Marc Zyngier
• [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board.   Wu, Josh
• [PATCH v2 00/16] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 01/16] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Marc Zyngier
• [PATCH v2 02/16] ARM: smp: Add an IPI handler callable from C code   Marc Zyngier
• [PATCH v2 03/16] ARM: GIC: Add global gic_handle_irq() function   Marc Zyngier
• [PATCH v2 04/16] ARM: RealView: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 05/16] ARM: VExpress: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 06/16] ARM: msm: convert SMP platforms to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 07/16] ARM: GIC: Add global gic_handle_irq_offset() function   Marc Zyngier
• [PATCH v2 08/16] ARM: exynos4: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 09/16] ARM: tegra2: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 10/16] ARM: ux500: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 11/16] ARM: shmobile: convert smp platforms to gic_handle_irq()   Marc Zyngier
• [PATCH v2 12/16] ARM: cns3xxx: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 13/16] ARM: zynq: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 14/16] ARM: omap2/3: Add global omap2/3_intc_handle_irq() functions   Marc Zyngier
• [PATCH v2 15/16] ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v2 16/16] ARM: GIC: Make MULTI_IRQ_HANDLER mandatory   Marc Zyngier
• [PATCH] merge i.MX3 and i.MX6   Sascha Hauer
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Sascha Hauer
• [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board.   Guennadi Liakhovetski
• [PATCH 1/4] ARM i.MX avic: add handle_irq function   Russell King - ARM Linux
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Russell King - ARM Linux
• [PATCH] ARM: imx/mx31moboard: use mc13xxx structs instead of removed mc13783 structs   Uwe Kleine-König
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 10/11] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Cousson, Benoit
• [PATCH] clk: Add initial WM831x clock driver   Mark Brown
• [PATCH 1/4] ARM i.MX avic: add handle_irq function   Sascha Hauer
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Cousson, Benoit
• [PATCH 03/11] arm/dts: Add support for OMAP4 PandaBoard   Cousson, Benoit
• [PATCH] mmc: card: modify mmc_getgeo function   Chris Ball
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH] mmc: card: modify mmc_getgeo function   Russell King - ARM Linux
• [PATCH] ARM i.MX gic: add handle_irq function   Russell King - ARM Linux
• [PATCH] mmc: card: modify mmc_getgeo function   Uwe Kleine-König
• Pull request: removal of most instances of mach/memory.h   Russell King - ARM Linux
• [RFC PATCH 10/14] ARM: cns3xxx: convert to CONFIG_MULTI_IRQ_HANDLER   Anton Vorontsov
• [PATCH] ARM i.MX gic: add handle_irq function   Shawn Guo
• [PATCH] mmc: card: modify mmc_getgeo function   Russell King - ARM Linux
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH] ARM i.MX gic: add handle_irq function   Shawn Guo
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Mark Brown
• [PATCH v2] mach-integrator: update defconfig   Linus Walleij
• [RFC PATCH 0/3] ARM: mm: add L2 suspend/resume support   Lorenzo Pieralisi
• [RFC PATCH 1/3] ARM: mm: add outercache resume hook   Lorenzo Pieralisi
• [RFC PATCH 2/3] ARM: mm: add l2x0 physical address parameter to init   Lorenzo Pieralisi
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Lorenzo Pieralisi
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [PATCHv2 0/3] Initial support for Picochip picoxcell   Arnd Bergmann
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [RFC PATCH 2/3] ARM: mm: add l2x0 physical address parameter to init   Russell King - ARM Linux
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Russell King - ARM Linux
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Russell King - ARM Linux
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Russell King - ARM Linux
• [PATCHv3 0/4] Initial support for Picochip picoXcell   Jamie Iles
• [PATCHv3 1/4] picoxcell: support for Picochip picoxcell devices   Jamie Iles
• [PATCHv3 2/4] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Jamie Iles
• [PATCHv3 3/4] picoxcell: add the DTS for the PC7302 board   Jamie Iles
• [PATCHv3 4/4] picoxcell: remove custom ioremap implementation   Jamie Iles
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Mark Brown
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH v3 0/3] ARM: mxs: add recording support for saif   Dong Aisheng
• [PATCH v3 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng
• [PATCH v3 2/3] ARM: mx28evk: add platform data for saif   Dong Aisheng
• [PATCH v3 3/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   Ohad Ben-Cohen
• [RFC PATCH 2/3] ARM: mm: add l2x0 physical address parameter to init   Lorenzo Pieralisi
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Lorenzo Pieralisi
• [PATCH 08/11] OMAP2+: board-generic: Add i2c static init   Tony Lindgren
• [PATCH 00/13] OMAP3+: Add DT support for early devices and i2c / twl6030   Benoit Cousson
• [PATCH 01/13] hwspinlock: OMAP4: Add spinlock support in DT   Benoit Cousson
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Benoit Cousson
• [PATCH 03/13] arm/dts: OMAP4: Add gpio nodes   Benoit Cousson
• [PATCH 04/13] irq: Add stub for none DT build in irqdomain.h   Benoit Cousson
• [PATCH 05/13] i2c: OMAP: Add DT support for i2c controller   Benoit Cousson
• [PATCH 06/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Benoit Cousson
• [PATCH 07/13] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030   Benoit Cousson
• [PATCH 08/13] arm/dts: OMAP4: Add i2c controller nodes   Benoit Cousson
• [PATCH 09/13] arm/dts: OMAP3: Add i2c controller nodes   Benoit Cousson
• [PATCH 10/13] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM   Benoit Cousson
• [PATCH 11/13] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices   Benoit Cousson
• [PATCH 12/13] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Benoit Cousson
• [PATCH 13/13] OMAP2+: board-generic: Remove i2c static init   Benoit Cousson
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Lorenzo Pieralisi
• [PATCH v3] mach-integrator: update defconfig   Linus Walleij
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver   Tony Lindgren
• [PATCH] ARM: platform fixups: remove mdesc argument to fixup function   Stephen Boyd
• [PATCHv3 2/4] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Rob Herring
• [PATCH 1/7] OMAP: PM: omap_device: add omap_hwmod_name_get_odev   Kevin Hilman
• [PATCH] ARM: tegra: Make earlyprintk choose a UART at runtime.   Doug Anderson
• [PATCH v2 1/6] OMAP: omap_device: Add omap_hwmod_name_get_dev   Kevin Hilman
• [PATCHv3 2/4] picoxcell: add the DTS for pc3x2 and pc3x3 devices   Jamie Iles
• [PATCH v2 4/7] clk: Add simple gated clock   Rob Herring
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver   DebBarma, Tarun Kanti
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH v2 0/7] Initial Calxeda Highbank support   Rob Herring
• [PATCH v2 4/7] clk: Add simple gated clock   Jamie Iles
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources   Kevin Hilman
• [PATCH v2 1/3] ARM: imx: Add imx cpuidle driver   Rob Lee
• serial: samsung: add clkdev based clock lookup and device tree support   Thomas Abraham
• [PATCH 1/9] serial: samsung: Keep a copy of the location of platform data in driver's private data   Thomas Abraham
• [PATCH 2/9] serial: samsung: move handling of fclk/n clock to platform code   Thomas Abraham
• [PATCH 3/9] serial: samsung: switch to clkdev based clock lookup   Thomas Abraham
• [PATCH 4/9] serial: samsung: remove struct 's3c24xx_uart_clksrc' and all uses of it   Thomas Abraham
• [PATCH 5/9] serial: samsung: remove all uses of get_clksrc and set_clksrc   Thomas Abraham
• [PATCH 6/9] arm: samsung: register uart clocks to clock lookup list   Thomas Abraham
• [PATCH 7/9] serial: samsung: merge all SoC specific port reset functions   Thomas Abraham
• [PATCH 8/9] serial: samsung: merge probe() function from all SoC specific extensions   Thomas Abraham
• [PATCH 9/9] serial: samsung: add device tree support   Thomas Abraham
• [PATCH v2 4/7] clk: Add simple gated clock   Rob Herring
• Pull request: removal of most instances of mach/memory.h   Russell King - ARM Linux
• [PATCH v4] of/irq: introduce of_irq_init   Rob Herring
• [PATCH v2 4/7] clk: Add simple gated clock   Jamie Iles
• [PATCH v2 0/4] S3C2416: Enable IIS and HSSPI clocks   Heiko Stübner
• [PATCH 3/3] ARM: gic: add OF based initialization   Jamie Iles
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts   David Brown
• Porting linux to Stellaris Cortex-M3   Fernando Endo
• [PATCH v2 00/16] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   David Brown
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 3/3] ARM: gic: add OF based initialization   Jamie Iles
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board   Tony Lindgren
• [PATCH 10/11] arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver   Tony Lindgren
• [PATCH 3/3] ARM: gic: add OF based initialization   Jamie Iles
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH 3/3] ARM: gic: add OF based initialization   Jamie Iles
• [GIT PULL] I2C: OMAP: misc. cleanup for v3.2   Kevin Hilman
• [PATCH v2 0/6] OMAP: omap_device cleanup before device-tree integration   Kevin Hilman
• [PATCH v2 4/7] clk: Add simple gated clock   Turquette, Mike
• Pull request: removal of most instances of mach/memory.h   Russell King - ARM Linux
• Pull request: removal of most instances of mach/memory.h   Russell King - ARM Linux
• [PATCH v3 0/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Kevin Hilman
• [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata   Kevin Hilman
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   Kevin Hilman
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH 01/11] OMAP2+: Add SoC specific map_io functions   Tony Lindgren
• [PATCH v7 04/26] gpio/omap: fix pwrdm_post_transition call sequence   Kevin Hilman
• [PATCH] ARM: OMAP2+: Use SoC specifc map_io   Tony Lindgren
• Pull request: removal of most instances of mach/memory.h   Russell King - ARM Linux
• [PATCH] ARM: OMAP2+: Remove custom init_irq for remaining boards   Tony Lindgren
• [GIT PULL] Samsung Fixes for v3.1   Kukjin Kim
• [PATCH v3 1/2] ARM: EXYNOS4: Add TVOUT support for SMDKV310   Kukjin Kim
• [PATCH v7 05/26] gpio/omap: handle save/restore context in GPIO driver   Kevin Hilman
• [PATCH 1/7] SPI: S3C64XX: Use bus clocks created using clkdev   Kukjin Kim
• Pull request: removal of most instances of mach/memory.h   Russell King - ARM Linux
• [PATCH v2 4/7] clk: Add simple gated clock   Rob Herring
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [PATCH resend 00/13] McBSP cleanup and generalization   Tony Lindgren
• [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts   David Brown
• [PATCH v7 REPOST 00/24] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v7 REPOST 01/24] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
• [PATCH v7 REPOST 02/24] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
• [PATCH v7 REPOST 03/24] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
• [PATCH v7 REPOST 04/24] gpio/omap: fix pwrdm_post_transition call sequence   Tarun Kanti DebBarma
• [PATCH v7 REPOST 05/24] gpio/omap: handle save/restore context in GPIO driver   Tarun Kanti DebBarma
• [PATCH v7 REPOST 06/24] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
• [PATCH v7 REPOST 07/24] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
• [PATCH v7 REPOST 08/24] gpio/omap: further cleanup using wkup_en register   Tarun Kanti DebBarma
• [PATCH v7 REPOST 09/24] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
• [PATCH v7 REPOST 10/24] gpio/omap: remove hardcoded offsets in context save/restore   Tarun Kanti DebBarma
• [PATCH v7 REPOST 11/24] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
• [PATCH v7 REPOST 12/24] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
• [PATCH v7 REPOST 13/24] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
• [PATCH v7 REPOST 14/24] gpio/omap: remove unnecessary bit-masking for read access   Tarun Kanti DebBarma
• [PATCH v7 REPOST 15/24] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
• [PATCH v7 REPOST 16/24] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
• [PATCH v7 REPOST 17/24] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
• [PATCH v7 REPOST 18/24] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
• [PATCH v7 REPOST 19/24] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
• [PATCH v7 REPOST 20/24] gpio/omap: remove omap_gpio_save_context overhead   Tarun Kanti DebBarma
• [PATCH v7 REPOST 21/24] gpio/omap: save and restore debounce registers   Tarun Kanti DebBarma
• [PATCH v7 REPOST 22/24] gpio/omap: enable irq at the end of all configuration in restore   Tarun Kanti DebBarma
• [PATCH v7 REPOST 23/24] gpio/omap: restore OE only after setting the output level   Tarun Kanti DebBarma
• [PATCH v7 REPOST 24/24] gpio/omap: handle set_dataout reg capable IP on restore   Tarun Kanti DebBarma
• [PATCH v2 00/16] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   David Brown
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [RFC 1/5] ARM: dev_archdata: add private iommu extension   Grant Likely
• [PATCH v3 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Grant Likely
• [PATCH v4] of/irq: introduce of_irq_init   Grant Likely
• [PATCH v2 16/16] ARM: GIC: Make MULTI_IRQ_HANDLER mandatory   Shawn Guo
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Santosh Shilimkar
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Rajendra Nayak
• [PATCH 06/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Rajendra Nayak
• [PATCH 08/13] arm/dts: OMAP4: Add i2c controller nodes   Rajendra Nayak
• Pull request: removal of most instances of mach/memory.h   Russell King - ARM Linux
• [PATCH 1/2] drivers: create a pin control subsystem v7   Linus Walleij
• [PATCH 0/4] mmc: mmci: Improvements and bugfixes for SDIO   Ulf Hansson
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Ulf Hansson
• [PATCH 2/4] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Ulf Hansson
• [PATCH 3/4] mmc: mmci: Prepare for SDIO before setting up DMA job   Ulf Hansson
• [PATCH 4/4] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Ulf Hansson
• [PATCH 1/2] drivers: create a pin control subsystem v7   Linus Walleij
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH v3 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH] iommu/core: let drivers know if an iommu fault   Ohad Ben-Cohen
• [GIT PULL] ux500-timers   Linus Walleij
• [PATCH] clk: provide prepare/unprepare functions   Russell King - ARM Linux
• [PATCH 1/9] clk: provide prepare/unprepare functions   Russell King - ARM Linux
• [PATCH 2/9] clk: amba bus: convert to clk_prepare()/clk_unprepare()   Russell King - ARM Linux
• [PATCH 3/9] clk: amba-clcd: convert to clk_prepare()/clk_unprepare()   Russell King - ARM Linux
• [PATCH 4/9] clk: amba-pl010: convert to clk_prepare()/clk_unprepare()   Russell King - ARM Linux
• [PATCH 5/9] clk: amba-pl011: convert to clk_prepare()/clk_unprepare()   Russell King - ARM Linux
• [PATCH v3 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH 6/9] clk: mmci: convert to clk_prepare()/clk_unprepare()   Russell King - ARM Linux
• [PATCH 7/9] clk: sa1111: convert to clk_prepare()/clk_unprepare()   Russell King - ARM Linux
• [PATCH 8/9] clk: timer-sp: convert to clk_prepare()/clk_unprepare()   Russell King - ARM Linux
• [PATCH 9/9] clk: spi-pl022: convert to clk_prepare()/clk_unprepare()   Russell King - ARM Linux
• [PATCH v2 16/16] ARM: GIC: Make MULTI_IRQ_HANDLER mandatory   Marc Zyngier
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   Ohad Ben-Cohen
• [PATCH] leds-class: change back LEDS_CLASS to tristate instead of bool   Bryan Wu
• [PATCH v3 0/6] iommu: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• Porting linux to Stellaris Cortex-M3   Maxin John
• [PATCH v2 00/16] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH v3 4/4] ARM: mx53_ard: Add flexcan support   Marc Kleine-Budde
• Porting linux to Stellaris Cortex-M3   Catalin Marinas
• [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms   Ohad Ben-Cohen
• Porting linux to Stellaris Cortex-M3   Russell King - ARM Linux
• [PATCH 1/2] drivers: create a pin control subsystem v7   Stijn Devriendt
• [PATCH V7 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Deepthi Dharwar
• [PATCH V7 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state   Deepthi Dharwar
• [PATCH V7 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Deepthi Dharwar
• [PATCH V7 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields   Deepthi Dharwar
• [PATCH V7 4/4] cpuidle: Single/Global registration of idle states   Deepthi Dharwar
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH 0/9] Device tree support for regulators   Rajendra Nayak
• [PATCH 1/9] regulator: twl: Remove hardcoded board constraints from driver   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 3/9] omap4: sdp: Pass regulator data from dt   Rajendra Nayak
• [PATCH 4/9] regulator: twl: Make twl-regulator driver extract data from DT   Rajendra Nayak
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Rajendra Nayak
• [PATCH 6/9] regulator: make fixed regulator driver extract data from dt   Rajendra Nayak
• [PATCH 7/9] omap4: panda: Pass regulator data from DT   Rajendra Nayak
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Rajendra Nayak
• Porting linux to Stellaris Cortex-M3   Catalin Marinas
• [PATCH v2 16/16] ARM: GIC: Make MULTI_IRQ_HANDLER mandatory   Shawn Guo
• [PATCH v2 00/16] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   Shawn Guo
• [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts   Shawn Guo
• [PATCH v2 00/16] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Lorenzo Pieralisi
• [PATCH 1/2 v2] plat-pxa: move PXA GPIO driver to GPIO subsystem   Linus Walleij
• [PATCH 2/2 v2] plat-pxa: break out GPIO driver specifics   Linus Walleij
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Santosh Shilimkar
• [PATCH 0/3] Clearify code paths for how to modify the power register   Ulf Hansson
• [PATCH 1/9] regulator: twl: Remove hardcoded board constraints from driver   Mark Brown
• [PATCH 1/3] mmc: mmci: Put power register deviations in variant data   Ulf Hansson
• [PATCH 2/3] mmc: mmci: Provide option to configure bus signal direction   Ulf Hansson
• [PATCH 3/3] mmc: mmci: Change vdd_handler to a generic ios_handler   Ulf Hansson
• [RFC 5/5] iommu/omap: eliminate the public omap_find_iommu_device() method   Laurent Pinchart
• [PATCH v2 10/16] ARM: ux500: convert to CONFIG_MULTI_IRQ_HANDLER   Linus Walleij
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 4/9] regulator: twl: Make twl-regulator driver extract data from DT   Mark Brown
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Mark Brown
• [PATCH 1/2] ARM: vic: device tree binding   Jamie Iles
• [PATCH 2/2] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Mark Brown
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Mark Brown
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• [PATCH v2 10/16] ARM: ux500: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• Porting linux to Stellaris Cortex-M3   Fernando Endo
• [PATCH v4] of/irq: introduce of_irq_init   Rob Herring
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• Porting linux to Stellaris Cortex-M3   Fernando Endo
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Igor Grinberg
• [PATCH 2/2] ARM: vic: MULTI_IRQ_HANDLER handler   Rob Herring
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH 1/2] ARM: vic: device tree binding   Rob Herring
• [PATCH 1/2] ARM: vic: device tree binding   Jamie Iles
• [PATCH v2 0/5] OMAP3EVM: Add support for MT9T111 sensor   Deepthy Ravi
• [PATCH v2 1/5] omap3evm: Enable regulators for camera interface   Deepthy Ravi
• [PATCH v2 2/5] [media] v4l: Add support for mt9t111 sensor driver   Deepthy Ravi
• [PATCH v2 3/5] omap3evm: Add Camera board init/hookup file   Deepthy Ravi
• [PATCH v2 4/5] ispccdc: Configure CCDC_SYN_MODE register   Deepthy Ravi
• [PATCH v2 5/5] omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers   Deepthy Ravi
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Arnd Bergmann
• [PATCH v2 0/5] OMAP3EVM: Add support for MT9T111 sensor   Gary Thomas
• [PATCH 2/2] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH 2/5] [media] v4l: Add mt9t111 sensor driver   Ravi, Deepthy
• [PATCH v7 REPOST 00/24] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH 1/9] regulator: twl: Remove hardcoded board constraints from driver   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 4/9] regulator: twl: Make twl-regulator driver extract data from DT   Rajendra Nayak
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Rajendra Nayak
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH] of: Add helpers to get one string in multiple strings property   Benoit Cousson
• [PATCH v3 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Cousson, Benoit
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Mark Brown
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [PATCH v2 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v2 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [PATCH v2 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH v2 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH V7 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Kevin Hilman
• [PATCH v3 0/6] OMAP: omap_device cleanup before device-tree integration   Benoit Cousson
• [PATCH v3 1/6] OMAP: omap_device: Add omap_device_get_by_hwmod_name   Benoit Cousson
• [PATCH v3 2/6] OMAP3: beagle-board: Use the omap_hwmod_name_get_dev API   Benoit Cousson
• [PATCH v3 3/6] OMAP2+: pm: Use hwmod name instead of dev pointer   Benoit Cousson
• [PATCH v3 4/6] OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PM   Benoit Cousson
• [PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency   Benoit Cousson
• [PATCH v3 6/6] OMAP2+: devices: Remove all omap_device_pm_latency structures   Benoit Cousson
• [PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency   Tony Lindgren
• [PATCH v2 2/3] arm/tegra: add support for ventana pinmuxing   Olof Johansson
• try_to_freeze() called with IRQs disabled on ARM   Ulrich Weigand
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Tim Bird
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Tim Bird
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Laurent Pinchart
• [PATCH v2 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Simon Glass
• [PATCH V2] Add platform driver support to the CS890x driver   Jaccon Bastiaansen
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Simon Glass
• [PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency   Kevin Hilman
• [PATCH V2] Add CS890x0 ethernet controller support to the i.MX21ADS   Jaccon Bastiaansen
• [PATCH v3 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v3 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [PATCH v3 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH v3 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency   Tony Lindgren
• [RFC PATCH 0/3] Add accurate boot timing to a Linux system   Simon Glass
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Mark Brown
• [PATCH V2 0/3] S5P64X0 PM Support   Abhilash Kesavan
• [PATCH 1/3] ARM: S5P: Make the common S5P PM code conditionally compile   Abhilash Kesavan
• [PATCH 2/3] ARM: S5P: Make the sleep code common for S5P series SoCs   Abhilash Kesavan
• [PATCH 3/3] ARM: S5P64X0: Add Power Management support   Abhilash Kesavan
• Porting linux to Stellaris Cortex-M3   Russell King - ARM Linux
• [PATCH 1/2] ARM: vic: device tree binding   Grant Likely
• [PATCH 2/2] ARM: vic: MULTI_IRQ_HANDLER handler   Grant Likely
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH v4] of/irq: introduce of_irq_init   Grant Likely
• [PATCH v3 0/6] OMAP: omap_device cleanup before device-tree integration   Kevin Hilman
• [PATCH] dma/imx-sdma+imx-dma: explicitly #include <linux/module.h>   Paul Gortmaker
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Mark Brown
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Mauro Carvalho Chehab
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Gary Thomas
• [PATCH v2 2/5] [media] v4l: Add support for mt9t111 sensor driver   Guennadi Liakhovetski
• [PATCH v7 00/26] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v2 00/16] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   Tony Lindgren
• [PATCH 1/2] drivers: create a pin control subsystem v7   Stephen Warren
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Stephen Warren
• [PATCH v2 00/16] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   Tony Lindgren
• [PATCH v3 2/3] ARM: gic: consolidate PPI handling   Tony Lindgren
• [PATCH v3 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v3 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [PATCH v3 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH v3 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH v2 01/16] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Tony Lindgren
• [PATCH v2 02/16] ARM: smp: Add an IPI handler callable from C code   Tony Lindgren
• [PATCH v2 03/16] ARM: GIC: Add global gic_handle_irq() function   Tony Lindgren
• [PATCH v2 14/16] ARM: omap2/3: Add global omap2/3_intc_handle_irq() functions   Tony Lindgren
• [PATCH v2 15/16] ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLER   Tony Lindgren
• [PATCH v2 16/16] ARM: GIC: Make MULTI_IRQ_HANDLER mandatory   Tony Lindgren
• [PATCH v4 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v4 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [PATCH v4 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH v4 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Peter De Schrijver
• [PATCH 1/2] devicetree: Add ARM pl061 gpio controller binding doc   Rob Herring
• [PATCH 2/2] devicetree: Add ARM pl022 spi controller binding doc   Rob Herring
• [linux-pm Query] Power Management Device Suspend/ Resume   Viresh Kumar
• [linux-pm Query] Power Management Device Suspend/ Resume   Vinod Koul
• [PATCH] dma/imx-sdma+imx-dma: explicitly #include <linux/module.h>   Vinod Koul
• [PATCH 0/4] arm/tegra: Convert gpio & pinmux to platform devices   Stephen Warren
• [PATCH 2/7] ARM: SAMSUNG: Add CLK Macro for clkdev support   padma venkat
• [PATCH v4 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH v4 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH v4 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH 0/4] mmc: mmci: Improvements and bugfixes for SDIO   Linus Walleij
• [PATCH 1/3] mmc: mmci: Put power register deviations in variant data   Linus Walleij
• [PATCH 2/3] mmc: mmci: Provide option to configure bus signal direction   Linus Walleij
• CODEC support for s3c2440   GIGIN JOSE
• [PATCH 3/3] mmc: mmci: Change vdd_handler to a generic ios_handler   Linus Walleij
• [PATCH V2 0/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Alim Akhtar
• [PATCH V2 1/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Alim Akhtar
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Hiremath, Vaibhav
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Sascha Hauer
• [PATCH v2 1/2] S3C2443/S3C2416: Add adc registers   Heiko Stübner
• [PATCH v2 2/2] s3c-adc: describe features via quirk constants   Heiko Stübner
• [linux-pm Query] Power Management Device Suspend/ Resume   Viresh Kumar
• [PATCH] dma/imx-sdma+imx-dma: explicitly #include <linux/module.h>   Uwe Kleine-König
• [PATCH v2 2/6] OMAP4: Clock: round_rate and recalc functions for DPLL_ABE   Paul Walmsley
• [PATCH v3 3/6] OMAP3+: use DPLL's round_rate when setting rate   Paul Walmsley
• [PATCH v2 4/6] OMAP3+: use DPLLs recalc function instead of omap2_get_dpll_rate   Paul Walmsley
• [PATCH] dma/imx-sdma+imx-dma: explicitly #include <linux/module.h>   Arnaud Lacombe
• [PATCH V9 0/5] imx53 ahci driver v9   Richard Zhu
• [PATCH V9 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms   Richard Zhu
• [PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features   Richard Zhu
• [PATCH V9 3/5] MX53 Enable the AHCI SATA on MX53 ARD board   Richard Zhu
• [PATCH V9 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board   Richard Zhu
• [PATCH V9 5/5] MX53 Enable the AHCI SATA on MX53 SMD board   Richard Zhu
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH V2 1/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Viresh Kumar
• [PATCH V2 1/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Linus Walleij
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Cousson, Benoit
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Cousson, Benoit
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [PATCH for 3.1] ARM: at91: add PWM driver selector in Kconfig for 9g45 family   Nicolas Ferre
• at91 material for 3.1   Nicolas Ferre
• [PATCH] ARM: mm: Align bank start to MAX_ORDER_NR_PAGES   Johan Palsson
• [PATCH V2 1/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Alim Akhtar
• [PATCH 06/13] mfd: twl-core: Add initial DT support for twl4030/twl6030   Cousson, Benoit
• [linux-pm Query] Power Management Device Suspend/ Resume   Vinod Koul
• [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH V2 1/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Alim Akhtar
• [RFC] Shrink sched_clock some more   Linus Walleij
• [PATCH 1/3] mmc: mmci: Put power register deviations in variant data   Sebastian RASMUSSEN
• [PATCH v4 0/7] add initial imx6q support   Shawn Guo
• [PATCH v4 1/7] arm/imx6q: add device tree source   Shawn Guo
• [PATCH v4 2/7] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH v4 3/7] arm/imx: add gic_handle_irq function   Shawn Guo
• [PATCH v4 4/7] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH v4 5/7] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH v4 6/7] arm/imx6q: add device tree machine support   Shawn Guo
• [PATCH v4 7/7] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH 0/6] Support single zImage for imx3 and imx6   Shawn Guo
• [PATCH 1/6] arm/imx: merge mm-imx35.c into mm-imx31.c   Shawn Guo
• [PATCH 2/6] arm/imx: rename mm-imx31.c to mm-imx3.c   Shawn Guo
• [PATCH 3/6] arm/imx: change mxc_init_l2x0() to an imx31/35 specific call   Shawn Guo
• [PATCH 4/6] arm/imx: remove cpu_is_xxx() from arch_idle()   Shawn Guo
• [PATCH 5/6] arm/imx: remove cpu_is_xxx() check from __imx_ioremap()   Shawn Guo
• [PATCH 6/6] arm/imx: merge i.MX3 and i.MX6   Shawn Guo
• [PATCH 3/3] mmc: mmci: Change vdd_handler to a generic ios_handler   Sebastian RASMUSSEN
• [PATCH 1/2] drivers: create a pin control subsystem v7   Linus Walleij
• [PATCH v5 0/6] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v5 1/6] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH v5 2/6] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH v5 3/6] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v5 4/6] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v5 5/6] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH v5 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Sakari Ailus
• [PATCH V2 1/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Viresh Kumar
• [PATCH 4/8] ispvideo: Add support for G/S/ENUM_STD ioctl   Mauro Carvalho Chehab
• [PATCH 0/8] S3C2416: Enable armdiv and armclk   Heiko Stübner
• [PATCH 1/8] S3C2416: Add armdiv_mask constant   Heiko Stübner
• [PATCH 2/8] S3C2443: Add infrastructure to transmit armdiv to common code   Heiko Stübner
• [PATCH 3/8] S3C2443: Move clk_arm and clk_armdiv to common code   Heiko Stübner
• [PATCH 4/8] S3C2416: Add comment describing the armdiv/armclk   Heiko Stübner
• [PATCH 5/8] S3C2443: Add get_rate operation for clk_armdiv   Heiko Stübner
• [PATCH 6/8] S3C2443: handle unset armdiv values gracefully   Heiko Stübner
• [PATCH 7/8] S3C2443: Accommodate cpufreq frequency scheme in armdiv   Heiko Stübner
• [PATCH 8/8] S3C2443: use clk_get_rate to init fclk in common_setup_clocks   Heiko Stübner
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [PATCHv2 00/10] VIC DT binding and MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 01/10] ARM: vic: device tree binding   Jamie Iles
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCHv2 03/10] ARM: ep93xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 04/10] ARM: netx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 05/10] ARM: nomadik: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 06/10] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 07/10] ARM: spear: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 09/10] ARM: versatile: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv2 10/10] ARM: samsung: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Linus Walleij
• [PATCHv2 05/10] ARM: nomadik: convert to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCHv2 03/10] ARM: ep93xx: convert to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCH V2 1/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Alim Akhtar
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Jamie Iles
• MAC firmware does not load due to (commit 288d5abe usermodehelper)   Richard Cochran
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH 6/6] arm/imx: merge i.MX3 and i.MX6   Sascha Hauer
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Linus Walleij
• [PATCH 0/6] Support single zImage for imx3 and imx6   Sascha Hauer
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Mark Brown
• [PATCHv2 08/10] ARM: u300: convert to MULTI_IRQ_HANDLER   Jamie Iles
• at91 material for 3.1   Arnd Bergmann
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Arnd Bergmann
• [PATCH 0/1] A trio of IXP425 boards   Richard Cochran
• [PATCH 1/1] ixp4xx: support omicron ixp425 based boards   Richard Cochran
• [PATCH v4 3/3] arm/tegra: device tree support for ventana board   Arnd Bergmann
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Mark Brown
• [PATCH] dma/imx-sdma+imx-dma: explicitly #include <linux/module.h>   Paul Gortmaker
• [PATCH] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• MAC firmware does not load due to (commit 288d5abe usermodehelper)   Linus Torvalds
• nr_cpus cmdline parameter not working   Mark Salter
• [PATCH v2 2/6] OMAP4: Clock: round_rate and recalc functions for DPLL_ABE   Jon Hunter
• [PATCH] arm: Add VIRTUALIZATION configuration menu and virtio options   Pawel Moll
• [PATCH v2 07/16] ARM: GIC: Add global gic_handle_irq_offset() function   Rob Herring
• [PATCH v3 3/6] OMAP3+: use DPLL's round_rate when setting rate   Jon Hunter
• Perf support for OMAP4   Will Deacon
• [PATCH v3 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Cousson, Benoit
• MAC firmware does not load due to (commit 288d5abe usermodehelper)   Richard Cochran
• [PATCH v4 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Stephen Warren
• [PATCH v4 3/3] arm/tegra: device tree support for ventana board   Stephen Warren
• [PATCH v3 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Kevin Hilman
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Stephen Warren
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Scott Wood
• [PATCH] OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds   Tony Lindgren
• [PATCH v2 4/4] arm: BeagleBoard: add support for the twl4030-madc   Tony Lindgren
• [PATCH v2 0/4] Fixes to twl4030-madc and add BeagleBoard support   Tony Lindgren
• [PATCH v4 3/3] arm/tegra: device tree support for ventana board   Olof Johansson
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Russell King - ARM Linux
• [PATCH] S3C2443: Add devname for hsmmc1 pclk   Heiko Stübner
• [PATCHv2 01/10] ARM: vic: device tree binding   Grant Likely
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Grant Likely
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [PATCH 0/2] Update MSM DEBUG_LL support   Stephen Boyd
• [PATCH 1/2] msm: Consolidate and move DEBUG_LL to generic ARM Kconfig   Stephen Boyd
• [PATCH 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Stephen Boyd
• [GIT PULL] at91 fixes for 3.1   Nicolas FERRE
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Scott Wood
• [PATCH 0/4] Few omap fixes for review   Tony Lindgren
• [PATCH 1/4] ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: Fix i2c init for twl4030   Tony Lindgren
• [PATCH 3/4] ARM: OMAP4: Keyboard: Fix section mismatch in the board file   Tony Lindgren
• [PATCH 4/4] ARM: OMAP: irq: loop counter fix in omap_init_irq()   Tony Lindgren
• [GIT PULL] dmtimer changes for v3.2 merge window   Tony Lindgren
• [GIT PULL] OMAP: Few sparse/bug fixes and clean-up for 3.2   Tony Lindgren
• [PATCH v2 2/6] OMAP4: Clock: round_rate and recalc functions for DPLL_ABE   Turquette, Mike
• [PATCH v5 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v5 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [PATCH v5 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH v5 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH v3 3/6] OMAP3+: use DPLL's round_rate when setting rate   Turquette, Mike
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 1/2] msm: Consolidate and move DEBUG_LL to generic ARM Kconfig   David Brown
• [PATCH v3 0/3] Add support for TI814X processor series   Hemant Pedanekar
• [PATCH v3 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support   Hemant Pedanekar
• [PATCH v3 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support   Hemant Pedanekar
• [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Hemant Pedanekar
• [PATCH] leds-class: change back LEDS_CLASS to tristate instead of bool   Bryan Wu
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Stephen Boyd
• [PATCH v2 1/6] OMAP4: Add missing clock divider for OCP_ABE_ICLK   Paul Walmsley
• [PATCH 0/2] GIC OF bindings   Rob Herring
• [PATCH 1/2] ARM: gic: add irq_domain support   Rob Herring
• [PATCH 2/2] ARM: gic: add OF based initialization   Rob Herring
• [PATCHv2 01/10] ARM: vic: device tree binding   Rob Herring
• [PATCH 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Nicolas Pitre
• [PATCH V2 1/1] dmaengine/amba-pl08x: Add support for s3c64xx DMAC   Viresh Kumar
• [PATCH 6/6] arm/imx: merge i.MX3 and i.MX6   Shawn Guo
• [PATCH 0/6] Support single zImage for imx3 and imx6   Shawn Guo
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Santosh Shilimkar
• [RFC PATCH 3/3] ARM: mm: add l2x0 suspend/resume support   Santosh Shilimkar
• [PATCH 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Stephen Boyd
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts   Abhijeet Dharmapurikar
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH] ARM: OMAP2+: dmtimer: Fix warning   Afzal Mohammed
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Linus Walleij
• [PATCH] usb: musb: OMAP4430: Remove a redundant omap4430_phy_init call in usb_musb_init   Felipe Balbi
• Perf support for OMAP4   Ming Lei
• [PATCH 0/2] ARM: EXYNOS4: Add support for MCT PPI   Kukjin Kim
• [PATCH 1/2] ARM: EXYNOS4: Add support PPI in external GIC   Kukjin Kim
• [PATCH 2/2] ARM: EXYNOS4: Add support MCT PPI for EXYNOS4212   Kukjin Kim
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Kukjin Kim
• [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin   Axel Lin
• [PATCH] leds-class: change back LEDS_CLASS to tristate instead of bool   Russell King - ARM Linux
• [PATCH 0/5] ARM: EXYNOS4: Add support for EXYNOS4412 SoC   Kukjin Kim
• [PATCH 1/5] ARM: EXYNOS4: Add support new EXYNOS4412 SoC   Kukjin Kim
• [PATCH 2/5] ARM: EXYNOS4: Add support clock for EXYNOS4412   Kukjin Kim
• [PATCH 3/5] ARM: EXYNOS4: Add functions for gic interrupt handling   Kukjin Kim
• [PATCH 4/5] ARM: EXYNOS4: Add MCT support for EXYNOS4412   Kukjin Kim
• [PATCH 5/5] ARM: EXYNOS4: Add support SMDK4412 Board   Kukjin Kim
• [PATCH] ARM: mm: Align bank start to MAX_ORDER_NR_PAGES   Linus Walleij
• [PATCH 6/6] arm/imx: merge i.MX3 and i.MX6   Sascha Hauer
• [PATCH v2] ARM: mm: Align bank start to MAX_ORDER_NR_PAGES   Linus Walleij
• [PATCH v5 00/15] OMAP2+: Serial: Runtime adaptation + cleanup   Govindraj
• [PATCH v2 07/16] ARM: GIC: Add global gic_handle_irq_offset() function   Marc Zyngier
• Perf support for OMAP4   Will Deacon
• [PATCH 4/6] arm/imx: remove cpu_is_xxx() from arch_idle()   Sascha Hauer
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Will Deacon
• [PATCH 0/2] GIC OF bindings   Jamie Iles
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Russell King - ARM Linux
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Barry Song
• [PATCH v5 2/3] arm/tegra: add support for ventana pinmuxing   Russell King - ARM Linux
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH v4 2/7] arm/imx6q: add core definitions and low-level debug uart   Russell King - ARM Linux
• [PATCH v4 3/7] arm/imx: add gic_handle_irq function   Russell King - ARM Linux
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Will Deacon
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Russell King - ARM Linux
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Lorenzo Pieralisi
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Santosh Shilimkar
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Will Deacon
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Russell King - ARM Linux
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Mark Brown
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Valdis.Kletnieks at vt.edu
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Barry Song
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Russell King - ARM Linux
• Long stalls during boot with -next   Mark Brown
• Long stalls during boot with -next   Takashi Iwai
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Russell King - ARM Linux
• [PATCH V2 11/16] mmc: omap_hsmmc: ensure pbias configuration is always done   T Krishnamoorthy, Balaji
• Long stalls during boot with -next   Mark Brown
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH v4 3/7] arm/imx: add gic_handle_irq function   Shawn Guo
• [PATCH v4 2/7] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• YCbCr 422 on s3c2440   GIGIN JOSE
• [PATCH 4/6] arm/imx: remove cpu_is_xxx() from arch_idle()   Shawn Guo
• [PATCH v4 3/7] arm/imx: add gic_handle_irq function   Shawn Guo
• [PATCH 0/2] arm: omap4: hsmmc: pbias fixes   Balaji T K
• [PATCH 1/2] arm: omap4: hsmmc: Fix Pbias configuration on regulator OFF   Balaji T K
• [PATCH 2/2] arm: omap4: hsmmc: configure SDMMC1_DR0 properly   Balaji T K
• [PATCH 0/2] arm: omap4: hsmmc: pbias fixes   T Krishnamoorthy, Balaji
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Zoltan Devai
• [PATCH v2] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH] Add missing include of linux/ftrace.h   Jamie Iles
• [PATCH 1/2] arm: orion5x: use native hex2bin()   Andy Shevchenko
• [PATCH 2/2] arm: orion5x: print mac address with %pM   Andy Shevchenko
• [PATCH v2] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Barry Song
• [PATCH 1/5] ARM: pxa: remove redundant macro on GPIO   Haojian Zhuang
• [PATCH 2/5] ARM: pxa: remove set_wake_t   Haojian Zhuang
• [PATCH 3/5] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH 4/5] ARM: pxa: use chained irq for GPIO0 and GPIO1   Haojian Zhuang
• [PATCH 5/5] ARM: pxa: move gpio driver into drivers directory   Haojian Zhuang
• [PATCH 2/2 v2] plat-pxa: break out GPIO driver specifics   Haojian Zhuang
• [PATCH v5 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH v5 2/3] arm/tegra: add support for ventana pinmuxing   Olof Johansson
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Luca Tettamanti
• [PATCH] ARM: imx/mx31moboard: use mc13xxx structs instead of removed mc13783 structs   Samuel Ortiz
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Luca Tettamanti
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Rob Herring
• [PATCH 2/2 v2] plat-pxa: break out GPIO driver specifics   Linus Walleij
• [PATCH 1/2] arm: omap4: hsmmc: Fix Pbias configuration on regulator OFF   Tony Lindgren
• [PATCH 5/5] ARM: pxa: move gpio driver into drivers directory   Russell King - ARM Linux
• [PATCH v2 3/5] omap3evm: Add Camera board init/hookup file   Tony Lindgren
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Grant Likely
• [PATCH v5 3/3] arm/tegra: device tree support for ventana board   Stephen Warren
• [PATCH 1/2] ARM: gic: add irq_domain support   Grant Likely
• [PATCH 2/2] ARM: gic: add OF based initialization   Grant Likely
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Nicolas Pitre
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Stephen Boyd
• [PATCH 12/13] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM   Grant Likely
• [PATCH v3 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Grant Likely
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   Will Deacon
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Russell King - ARM Linux
• [PATCHv2 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice   David Brown
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Rob Herring
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Nicolas Pitre
• [PATCH 1/5] ARM: pxa: remove redundant macro on GPIO   Michał Mirosław
• [PATCH v2 0/7] Add a generic struct clk   Mark Brown
• [PATCH v5 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH 7/8] OMAP4: clock: Add CPU local timer clock node.   Paul Walmsley
• YCbCr 422 on s3c2440   Guennadi Liakhovetski
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Thomas Gleixner
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Rob Herring
• [PATCH v3 2/2] OMAP: omap_device: Add a method to build an omap_device from a DT node   Kevin Hilman
• [PATCH v3 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support   Paul Walmsley
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Nicolas Pitre
• [PATCH 1/2] ARM: gic: add irq_domain support   Rob Herring
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Rob Herring
• [PATCH] ARM: realview: fix map_desc alignment   Rob Herring
• [PATCH 7/8] OMAP4: clock: Add CPU local timer clock node.   Linus Walleij
• [PATCH 1/5] ARM: pxa: remove redundant macro on GPIO   Linus Walleij
• [PATCH 1/5] ARM: pxa: remove redundant macro on GPIO   Grant Likely
• [PATCH 3/5] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Grant Likely
• [PATCH 4/5] ARM: pxa: use chained irq for GPIO0 and GPIO1   Grant Likely
• Patch 7022 bug   Russell King - ARM Linux
• [PATCH 5/5] ARM: pxa: move gpio driver into drivers directory   Grant Likely
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Barry Song
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Barry Song
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Nicolas Pitre
• [PATCH 1/2] ARM: gic: add irq_domain support   Grant Likely
• [PATCH] ARM: realview-eb11mp: fix map_desc alignment   Rob Herring
• [PATCH] OMAP2+: clock: use clock's recalc in DPLL handling   Mike Turquette
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH] OMAP2+: clock: use clock's recalc in DPLL handling   Paul Walmsley
• [PATCH 5/9] regulator: helper routine to extract fixed_voltage_config   Grant Likely
• [PATCH] OMAP2+: clock: use clock's recalc in DPLL handling   Turquette, Mike
• [PATCH 6/9] regulator: make fixed regulator driver extract data from dt   Grant Likely
• [PATCH] ARM: realview-eb11mp: fix map_desc alignment   Nicolas Pitre
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Grant Likely
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Grant Likely
• [PATCH 0/9] Device tree support for regulators   Grant Likely
• [PATCH] ARM: localtimer: add header linux/errno.h explicitly   Shawn Guo
• [PATCH] drivers: create a pin control subsystem v8   Grant Likely
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Grant Likely
• [PATCH 1/5] ARM: pxa: remove redundant macro on GPIO   Eric Miao
• [PATCH 1/5] ARM: pxa: remove redundant macro on GPIO   Haojian Zhuang
• [PATCH v3] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Per Förlin
• [PATCH v5 0/3] AM3517: Booting up   Abhilash K V
• [PATCH v5 1/3] AM35x: Using OMAP3 generic hwmods   Abhilash K V
• [PATCH v5 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices   Abhilash K V
• [PATCH v5 3/3] OMAP2+: voltage: add check for missing PMIC info in vp init   Abhilash K V
• [PATCH] mx5: modify pm and idle   Hui Wang
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Kukjin Kim
• [PATCH 5/5] ARM: pxa: move gpio driver into drivers directory   Haojian Zhuang
• [PATCH v2 0/5] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   Kukjin Kim
• [PATCH v2 1/5] ARM: EXYNOS4: Change System MMU device definition   Kukjin Kim
• [PATCH v2 2/5] ARM: S5P: Remove system MMU driver from arm/plat-s5p   Kukjin Kim
• [PATCH v2 3/5] iommu/exynos: Add iommu driver for Exynos4 Platforms   Kukjin Kim
• [PATCH v2 4/5] iommu/exynos: Add iommu fault handler   Kukjin Kim
• [PATCH v2 5/5] iommu/exynos: Use bus_set_iommu instead of register_iommu   Kukjin Kim
• [PATCH 5/5] ARM: pxa: move gpio driver into drivers directory   Haojian Zhuang
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Barry Song
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Cousson, Benoit
• [PATCH 5/5] ARM: pxa: move gpio driver into drivers directory   Russell King - ARM Linux
• [PATCH v5 1/3] AM35x: Using OMAP3 generic hwmods   Paul Walmsley
• [PATCH v3] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Will Deacon
• [PATCH v3] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH] Add platform driver support to the CS890x driver   Jaccon Bastiaansen
• [PATCH v4 6/7] arm/imx6q: add device tree machine support   Jamie Iles
• [PATCH v3 2/2] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board.   Guennadi Liakhovetski
• [PATCH v3 1/2][media] Add code to enable/disable ISI_MCK clock.   Guennadi Liakhovetski
• [PATCH 7/8] OMAP4: clock: Add CPU local timer clock node.   Shilimkar, Santosh
• [PATCH 7/8] OMAP4: clock: Add CPU local timer clock node.   Shilimkar, Santosh
• [PATCH v3] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shawn Guo
• [PATCH] ARM: debug: provide dummy default option for DEBUG_LL UART choice   Will Deacon
• [PATCH 9/9] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Per Förlin
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Rajendra Nayak
• [PATCH v3] ARM: cache-l2x0: add resume entry for l2 in secure mode   Shilimkar, Santosh
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Will Deacon
• [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH] genirq: percpu: allow interrupt type to be set at enable t=   Marc Zyngier
• [PATCH 0/3] Updates to ARM PMU event numbers   Will Deacon
• [PATCH 1/3] ARM: perf: fix HW_CACHE_* events on Cortex-A9   Will Deacon
• [PATCH 2/3] ARM: perf: clean and update ARMv7 event numbers   Will Deacon
• [PATCH 3/3] ARM: perf: add support for stalled cycle ABI events   Will Deacon
• [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory   Haojian Zhuang
• [PATCH v2 1/5] ARM: pxa: remove redundant macro on GPIO   Haojian Zhuang
• [PATCH v2 2/5] ARM: pxa: remove set_wake_t   Haojian Zhuang
• [PATCH v2 3/5] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v2 4/5] ARM: pxa: use chained irq for GPIO0 and GPIO1   Haojian Zhuang
• [PATCH v2 5/5] ARM: pxa: move gpio driver into drivers directory   Haojian Zhuang
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v6 00/16] OMAP2+: UART: Runtime adaptation + cleanup   Govindraj.R
• [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Govindraj.R
• [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH v6 03/16] OMAP2+: UART: cleanup + remove uart pm specific API   Govindraj.R
• [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support   Govindraj.R
• [PATCH v6 05/16] OMAP2+: UART: Cleanup part of clock gating mechanism for uart   Govindraj.R
• [PATCH v6 06/16] OMAP2+: UART: Remove certain feilds from omap_uart_state struct   Govindraj.R
• [PATCH v6 07/16] OMAP2+: UART: Add default mux for all uarts.   Govindraj.R
• [PATCH v6 08/16] OMAP2+: UART: Store certain reg values to port structure   Govindraj.R
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj.R
• [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function   Govindraj.R
• [PATCH v6 11/16] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Govindraj.R
• [PATCH v6 12/16] OMAP2+: UART: Allow UART parameters to be configured from board file.   Govindraj.R
• [PATCH v6 13/16] OMAP2+: UART: Make the RX_TIMEOUT for DMA configurable for each UART   Govindraj.R
• [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken   Govindraj.R
• [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Govindraj.R
• [PATCH v6 16/16] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Govindraj.R
• [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts   Marc Zyngier
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 0/2]: Add a common macro for creating struct clk_lookup entries   Padmavathi Venna
• [PATCH 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup   Padmavathi Venna
• [PATCH 2/2] ARM: Switch to using CLKDEV_INIT macro for creating clk_lookup instance   Padmavathi Venna
• [PATCH V2 0/4]: ARM: SAMSUNG: Add SPI clkdev support   Padmavathi Venna
• [PATCH 1/4] ARM: S3C64XX: Add SPI clkdev support   Padmavathi Venna
• [PATCH 2/4] ARM: S5PC100: Add SPI clkdev support   Padmavathi Venna
• [PATCH 3/4] ARM: S5P64X0: Add SPI clkdev support   Padmavathi Venna
• [PATCH 4/4] ARM: S5PV210: Add SPI clkdev support   Padmavathi Venna
• [PATCH 2/2] ARM: Switch to using CLKDEV_INIT macro for creating clk_lookup instance   Hans J. Koch
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Cousson, Benoit
• [PATCH 0/2]: Add SPI Support on Exynos4   Padmavathi Venna
• [PATCH 1/2] ARM: EXYNOS4: Add SPI support   Padmavathi Venna
• [PATCH 2/2] SPI: EXYNOS4: Enable the SPI driver for EXYNOS4   Padmavathi Venna
• [PATCH 02/13] gpio/omap: Adapt GPIO driver to DT   Cousson, Benoit
• [PATCH] arm/imx: rename MX51_MXC_INT_ATA to MX51_INT_ATA   Shawn Guo
• [PATCH v2 3/5] iommu/exynos: Add iommu driver for Exynos4 Platforms   Roedel, Joerg
• [PATCH] arm/mx5: remove the magic reference to '__NA_' from board-mx51_efikasb.c   Shawn Guo
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources   Premi, Sanjeev
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH] ARM: mxs: Consolidate mm-mx23.c and mm-mx28.c into a single file   Fabio Estevam
• [PATCH 2/2] ARM: Switch to using CLKDEV_INIT macro for creating clk_lookup instance   Ryan Mallon
• [PATCH 2/2] ARM: Switch to using CLKDEV_INIT macro for creating clk_lookup instance   Amit Kucheria
• S3C6410 synchronous mode   Tomasz Figa
• [PATCH 1/3] ARM: SAMSUNG: Moving each SoC support header files   Kukjin Kim
• [PATCH 2/3] ARM: SAMSUNG: Move S3C24XX header files to plat-samsung   Kukjin Kim
• [PATCH 3/3] ARM: SAMSUNG: Move S5P header files to plat-samsung   Kukjin Kim
• [RFC] Need help deciphering reboot modes!   Will Deacon
• [PATCH v5 0/2] Add device tree support for i.mx51/53 boards   Shawn Guo
• [PATCH 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Shawn Guo
• [PATCH 2/2 v7] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH v2 2/5] ARM: S5P: Remove system MMU driver from arm/plat-s5p   Roedel, Joerg
• [PATCH v2 5/5] iommu/exynos: Use bus_set_iommu instead of register_iommu   Roedel, Joerg
• [PATCH 1/2] arm/mx5: add device tree support for imx53 boards   Fabio Estevam
• ARM SoC tree: OMAP PM dependency on tip irq/core   Kevin Hilman
• [PATCH] arm/imx: rename MX51_MXC_INT_ATA to MX51_INT_ATA   Arnaud Patard (Rtp)
• [RFC] Need help deciphering reboot modes!   Will Deacon
• [PATCH 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
• [PATCH 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
• [PATCH v4 6/7] arm/imx6q: add device tree machine support   Shawn Guo
• [PATCH] drivers: create a pin control subsystem v8   Linus Walleij
• [PATCH] ARM: mxs: Consolidate mm-mx23.c and mm-mx28.c into a single file   Fabio Estevam
• [PATCH 1/2] arm: omap4: hsmmc: Fix Pbias configuration on regulator OFF   T Krishnamoorthy, Balaji
• [PATCH] ARM: mxs: Consolidate mm-mx23.c and mm-mx28.c into a single file   Shawn Guo
• [PATCH] ARM: mxs: Consolidate mm-mx23.c and mm-mx28.c into a single file   Shawn Guo
• [PATCH v2] ARM: mxs: Consolidate mm-mx23.c and mm-mx28.c into a single file   Fabio Estevam
• [RFC PATCH 0/3] ARM: amba: defining module aliases for AMBA driver autoloading   Dave Martin
• [RFC PATCH 1/3] ARM: amba: pass a suitable modalias to udev   Dave Martin
• [RFC PATCH 2/3] ARM: sound/arm/aaci.c: Define amba module alias   Dave Martin
• [RFC PATCH 3/3] ARM: drivers/mmc/host/mmci.c: Define amba module alias   Dave Martin
• [PATCH 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup   H Hartley Sweeten
• [PATCH 2/2] ARM: Switch to using CLKDEV_INIT macro for creating clk_lookup instance   H Hartley Sweeten
• [PATCH] drivers: create a pin control subsystem v8   Grant Likely
• [PATCH 2/2] ARM: Switch to using CLKDEV_INIT macro for creating clk_lookup instance   H Hartley Sweeten
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources   Kevin Hilman
• [PATCH 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup   H Hartley Sweeten
• [PATCH] drivers: create a pin control subsystem v8   Linus Walleij
• [PATCH 1/2] arm: omap4: hsmmc: Fix Pbias configuration on regulator OFF   Tony Lindgren
• [PATCH] usb: musb: OMAP4430: Remove a redundant omap4430_phy_init call in usb_musb_init   Tony Lindgren
• [PATCH] drivers: create a pin control subsystem v8   Stephen Warren
• [PATCH] ARM: OMAP2+: PM: only register TWL with voltage layer when device is present   Kevin Hilman
• [PATCH v5 3/3] OMAP2+: voltage: add check for missing PMIC info in vp init   Paul Walmsley
• [PATCH v2] ARM: OMAP2+: clock: cleanup CPUfreq leftovers   Paul Walmsley
• [RFC] Need help deciphering reboot modes!   Russell King - ARM Linux
• [PATCH 0/3] GIC OF bindings   Rob Herring
• [PATCH 1/3] irq: support domains with non-zero hwirq base   Rob Herring
• [PATCH 2/3] ARM: gic: add irq_domain support   Rob Herring
• [PATCH 3/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 0/4] ARM: CSR: cleanup some minor coding-style issues   Arnd Bergmann
• [GIT PULL] omap cleanup part3 for v3.2 merge window   Tony Lindgren
• [GIT PULL] omap cleanup part2 for v3.2 merge window   Arnd Bergmann
• [GIT PULL] omap cleanup part1 for v3.2 merge window   Arnd Bergmann
• [GIT PULL] dmtimer changes for v3.2 merge window   Arnd Bergmann
• [GIT PULL] at91 fixes for 3.1   Arnd Bergmann
• [GIT PULL] ux500-timers   Arnd Bergmann
• [PATCH v2 0/7] Initial Calxeda Highbank support   Arnd Bergmann
• [GIT PATCH] OMAP: Add initial support for DT on OMAP3 & OMAP4   Cousson, Benoit
• [GIT PULL] dmtimer changes for v3.2 merge window   Tony Lindgren
• [PATCHv3 0/4] Initial support for Picochip picoXcell   Arnd Bergmann
• [GIT PULL] dmtimer changes for v3.2 merge window   Arnd Bergmann
• [GIT PULL] OMAP: more omap_device preparations for DT   Kevin Hilman
• [GIT PULL] omap cleanup part3 for v3.2 merge window   Arnd Bergmann
• [PATCH v5 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices   Kevin Hilman
• [PATCH v4 0/7] add initial imx6q support   Arnd Bergmann
• [GIT PULL] OMAP: more omap_device preparations for DT   Tony Lindgren
• [PATCH v5 3/3] OMAP2+: voltage: add check for missing PMIC info in vp init   Kevin Hilman
• [GIT PATCH] OMAP: Add initial support for DT on OMAP3 & OMAP4   Tony Lindgren
• [GIT PULL] omap cleanup part3 for v3.2 merge window   Tony Lindgren
• [PATCH] ARM: tegra: Make earlyprintk choose a UART at runtime.   Stephen Warren
• [PATCH v5 3/3] OMAP2+: voltage: add check for missing PMIC info in vp init   Kevin Hilman
• ARM SoC tree: OMAP PM dependency on tip irq/core   Kevin Hilman
• Porting linux to Stellaris Cortex-M3   Fernando Endo
• [PATCH v5 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices   Kevin Hilman
• [PATCH v2 3/5] iommu/exynos: Add iommu driver for Exynos4 Platforms   KyongHo Cho
• [PATCH v2 2/5] ARM: S5P: Remove system MMU driver from arm/plat-s5p   KyongHo Cho
• [PATCH v2 5/5] iommu/exynos: Use bus_set_iommu instead of register_iommu   KyongHo Cho
• [PATCH v3 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support   Pedanekar, Hemant
• [GIT PULL] ARM: CSR: cleanup some minor coding-style issues for 3.2   Barry Song
• [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2   Barry Song