[PATCH v2 3/5] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Haojian Zhuang
haojian.zhuang at marvell.com
Fri Sep 30 06:19:18 EDT 2011
Rename gpio_to_irq() to pxa_gpio_to_irq(), and rename irq_to_gpio() to
pxa_irq_to_gpio(). This rename operations is used to avoid naming
confliction while gpio driver is moved into drivers/gpio/ directory.
Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
---
arch/arm/mach-mmp/aspenite.c | 4 +-
arch/arm/mach-mmp/flint.c | 4 +-
arch/arm/mach-mmp/include/mach/gpio.h | 4 +-
arch/arm/mach-mmp/tavorevb.c | 4 +-
arch/arm/mach-mmp/teton_bga.c | 2 +-
arch/arm/mach-pxa/capc7117.c | 12 ++++----
arch/arm/mach-pxa/cm-x270.c | 2 +-
arch/arm/mach-pxa/cm-x2xx-pci.c | 4 +-
arch/arm/mach-pxa/colibri-pxa270.c | 6 ++--
arch/arm/mach-pxa/colibri-pxa300.c | 4 +-
arch/arm/mach-pxa/colibri-pxa320.c | 4 +-
arch/arm/mach-pxa/corgi.c | 2 +-
arch/arm/mach-pxa/em-x270.c | 6 ++--
arch/arm/mach-pxa/hx4700.c | 18 +++++++-------
arch/arm/mach-pxa/icontrol.c | 8 +++---
arch/arm/mach-pxa/include/mach/csb726.h | 4 +-
arch/arm/mach-pxa/include/mach/gpio.h | 4 +-
arch/arm/mach-pxa/littleton.c | 2 +-
arch/arm/mach-pxa/magician.c | 8 +++---
arch/arm/mach-pxa/mioa701.c | 12 ++++----
arch/arm/mach-pxa/mxm8x10.c | 4 +-
arch/arm/mach-pxa/poodle.c | 2 +-
arch/arm/mach-pxa/pxa25x.c | 2 +-
arch/arm/mach-pxa/pxa27x.c | 2 +-
arch/arm/mach-pxa/raumfeld.c | 14 +++++-----
arch/arm/mach-pxa/saar.c | 6 ++--
arch/arm/mach-pxa/saarb.c | 2 +-
arch/arm/mach-pxa/spitz.c | 2 +-
arch/arm/mach-pxa/stargate2.c | 4 +-
arch/arm/mach-pxa/tavorevb.c | 4 +-
arch/arm/mach-pxa/tavorevb3.c | 2 +-
arch/arm/mach-pxa/tosa.c | 4 +-
arch/arm/mach-pxa/viper.c | 16 ++++++------
arch/arm/mach-pxa/vpac270.c | 4 +-
arch/arm/mach-pxa/z2.c | 2 +-
arch/arm/mach-pxa/zeus.c | 40 +++++++++++++++++-------------
arch/arm/mach-pxa/zylonite.c | 4 +-
arch/arm/plat-pxa/gpio.c | 13 +++++----
38 files changed, 124 insertions(+), 117 deletions(-)
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 2b3b0c6..6b19812 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -119,8 +119,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(27),
- .end = gpio_to_irq(27),
+ .start = pxa_gpio_to_irq(27),
+ .end = pxa_gpio_to_irq(27),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index c4fd806..f466a2c 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -87,8 +87,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(155),
- .end = gpio_to_irq(155),
+ .start = pxa_gpio_to_irq(155),
+ .end = pxa_gpio_to_irq(155),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 7bfb827..5ed6977 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -13,8 +13,8 @@
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
-#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
-#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
+#define pxa_gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
+#define pxa_irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
#define __gpio_is_inverted(gpio) (0)
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index 143e52e..c5e1529 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -70,8 +70,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(80),
- .end = gpio_to_irq(80),
+ .start = pxa_gpio_to_irq(80),
+ .end = pxa_gpio_to_irq(80),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index bbe4727..79bbbc2 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -66,7 +66,7 @@ static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
{
I2C_BOARD_INFO("ds1337", 0x68),
- .irq = gpio_to_irq(RTC_INT_GPIO)
+ .irq = pxa_gpio_to_irq(RTC_INT_GPIO)
},
};
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d..6046eac 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -50,8 +50,8 @@ static struct resource capc7117_ide_resources[] = {
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .start = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .end = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
}
};
@@ -80,7 +80,7 @@ static void __init capc7117_ide_init(void)
static struct plat_serial8250_port ti16c752_platform_data[] = {
[0] = {
.mapbase = 0x14000000,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+ .irq = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -89,7 +89,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
},
[1] = {
.mapbase = 0x14000040,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+ .irq = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -98,7 +98,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
},
[2] = {
.mapbase = 0x14000080,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+ .irq = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -107,7 +107,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
},
[3] = {
.mapbase = 0x140000c0,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+ .irq = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 13518a7..885e91a 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -380,7 +380,7 @@ static struct spi_board_info cm_x270_spi_devices[] __initdata = {
.modalias = "libertas_spi",
.max_speed_hz = 13000000,
.bus_num = 2,
- .irq = gpio_to_irq(95),
+ .irq = pxa_gpio_to_irq(95),
.chip_select = 0,
.controller_data = &cm_x270_libertas_chip,
.platform_data = &cm_x270_libertas_pdata,
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 6bf479d..9583517 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -43,9 +43,9 @@ void __cmx2xx_pci_init_irq(int irq_gpio)
cmx2xx_it8152_irq_gpio = irq_gpio;
- irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(pxa_gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
- irq_set_chained_handler(gpio_to_irq(irq_gpio),
+ irq_set_chained_handler(pxa_gpio_to_irq(irq_gpio),
cmx2xx_it8152_irq_demux);
}
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 7db6646..74dbfa6 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -217,8 +217,8 @@ static struct resource colibri_pxa270_dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
- .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .start = pxa_gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .end = pxa_gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
@@ -248,7 +248,7 @@ static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
};
static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
- .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+ .irq = pxa_gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
};
static struct platform_device colibri_pxa270_ucb1400_device = {
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8b..3d428eb 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -78,8 +78,8 @@ static struct resource colibri_asix_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .start = pxa_gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .end = pxa_gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 692e1ff..817c6cb 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -115,8 +115,8 @@ static struct resource colibri_asix_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .start = pxa_gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .end = pxa_gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index fcc04dd..88cacd8 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -531,7 +531,7 @@ static struct spi_board_info corgi_spi_devices[] = {
.chip_select = 0,
.platform_data = &corgi_ads7846_info,
.controller_data= &corgi_ads7846_chip,
- .irq = gpio_to_irq(CORGI_GPIO_TP_INT),
+ .irq = pxa_gpio_to_irq(CORGI_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
.max_speed_hz = 50000,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b..a802c2c 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -558,7 +558,7 @@ static int em_x270_mci_init(struct device *dev,
return PTR_ERR(em_x270_sdio_ldo);
}
- err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+ err = request_irq(pxa_gpio_to_irq(mmc_cd), em_x270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"MMC card detect", data);
@@ -588,7 +588,7 @@ static int em_x270_mci_init(struct device *dev,
return 0;
err_gpio_wp:
- free_irq(gpio_to_irq(mmc_cd), data);
+ free_irq(pxa_gpio_to_irq(mmc_cd), data);
err_irq:
regulator_put(em_x270_sdio_ldo);
@@ -611,7 +611,7 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static void em_x270_mci_exit(struct device *dev, void *data)
{
- free_irq(gpio_to_irq(mmc_cd), data);
+ free_irq(pxa_gpio_to_irq(mmc_cd), data);
regulator_put(em_x270_sdio_ldo);
if (machine_is_em_x270())
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368e..03b5ced 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -252,8 +252,8 @@ static struct resource asic3_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
- .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+ .start = pxa_gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+ .end = pxa_gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
.flags = IORESOURCE_IRQ,
},
/* SD part */
@@ -263,8 +263,8 @@ static struct resource asic3_resources[] = {
.flags = IORESOURCE_MEM,
},
[3] = {
- .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
- .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .start = pxa_gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .end = pxa_gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
@@ -587,7 +587,7 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
.modalias = "ads7846",
.bus_num = 2,
.max_speed_hz = 2600000, /* 100 kHz sample rate */
- .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+ .irq = pxa_gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
.platform_data = &tsc2046_info,
.controller_data = &tsc2046_chip,
},
@@ -635,15 +635,15 @@ static struct resource power_supply_resources[] = {
.name = "ac",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
- .start = gpio_to_irq(GPIOD9_nAC_IN),
- .end = gpio_to_irq(GPIOD9_nAC_IN),
+ .start = pxa_gpio_to_irq(GPIOD9_nAC_IN),
+ .end = pxa_gpio_to_irq(GPIOD9_nAC_IN),
},
[1] = {
.name = "usb",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
- .start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
- .end = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+ .start = pxa_gpio_to_irq(GPIOD14_nUSBC_DETECT),
+ .end = pxa_gpio_to_irq(GPIOD14_nUSBC_DETECT),
},
};
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db..c15d095 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -86,7 +86,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.chip_select = 0,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info1,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+ .irq = pxa_gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
},
{
.modalias = "mcp2515",
@@ -95,7 +95,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.chip_select = 1,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info2,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+ .irq = pxa_gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
},
{
.modalias = "mcp2515",
@@ -104,7 +104,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.chip_select = 0,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info3,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+ .irq = pxa_gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
},
{
.modalias = "mcp2515",
@@ -113,7 +113,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.chip_select = 1,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info4,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+ .irq = pxa_gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
}
};
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
index 747ab1a..ba17e0f 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -19,8 +19,8 @@
#define CSB726_FLASH_SIZE (64 * 1024 * 1024)
#define CSB726_FLASH_uMON (8 * 1024 * 1024)
-#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+#define CSB726_IRQ_LAN pxa_gpio_to_irq(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501 pxa_gpio_to_irq(CSB726_GPIO_IRQ_SM501)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 1b77c11..45ac8e6 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -58,9 +58,9 @@
#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
-#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
+#define pxa_gpio_to_irq(gpio) IRQ_GPIO(gpio)
-static inline int irq_to_gpio(unsigned int irq)
+static inline int pxa_irq_to_gpio(unsigned int irq)
{
int gpio;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 7b324ec..0296e1d 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -396,7 +396,7 @@ static struct i2c_board_info littleton_i2c_info[] = {
.type = "da9034",
.addr = 0x34,
.platform_data = &littleton_da9034_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)),
+ .irq = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)),
},
[1] = {
.type = "max7320",
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c3..e58f9e1 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -184,8 +184,8 @@ static struct resource egpio_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
- .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+ .start = pxa_gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+ .end = pxa_gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
.flags = IORESOURCE_IRQ,
},
};
@@ -468,8 +468,8 @@ static struct resource pasic3_resources[] = {
},
/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
[1] = {
- .start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
- .end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .start = pxa_gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .end = pxa_gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index b938fc2..967ab8d 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -314,7 +314,7 @@ static int __init gsm_init(void)
rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
if (rc)
goto err_gpio;
- rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
+ rc = request_irq(pxa_gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"GSM XS200 Power Irq", NULL);
if (rc)
@@ -333,7 +333,7 @@ err_gpio:
static void gsm_exit(void)
{
- free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
+ free_irq(pxa_gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
}
@@ -541,15 +541,15 @@ static struct pda_power_pdata power_pdata = {
static struct resource power_resources[] = {
[0] = {
.name = "ac",
- .start = gpio_to_irq(GPIO96_AC_DETECT),
- .end = gpio_to_irq(GPIO96_AC_DETECT),
+ .start = pxa_gpio_to_irq(GPIO96_AC_DETECT),
+ .end = pxa_gpio_to_irq(GPIO96_AC_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
[1] = {
.name = "usb",
- .start = gpio_to_irq(GPIO13_nUSB_DETECT),
- .end = gpio_to_irq(GPIO13_nUSB_DETECT),
+ .start = pxa_gpio_to_irq(GPIO13_nUSB_DETECT),
+ .end = pxa_gpio_to_irq(GPIO13_nUSB_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 90928d6..ef9901c 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -417,8 +417,8 @@ static struct resource dm9k_resources[] = {
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .start = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .end = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
}
};
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 79a94fe..469dcd6 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -212,7 +212,7 @@ static struct spi_board_info poodle_spi_devices[] = {
.bus_num = 1,
.platform_data = &poodle_ads7846_info,
.controller_data= &poodle_ads7846_chip,
- .irq = gpio_to_irq(POODLE_GPIO_TP_INT),
+ .irq = pxa_gpio_to_irq(POODLE_GPIO_TP_INT),
},
};
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6bb3fa5..2ae1739 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -286,7 +286,7 @@ static inline void pxa25x_init_pm(void) {}
static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
uint32_t mask = 0;
if (gpio >= 0 && gpio < 85)
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d2cdcd6..03d0728 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -354,7 +354,7 @@ static inline void pxa27x_init_pm(void) {}
*/
static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
uint32_t mask;
if (gpio >= 0 && gpio < 128)
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index f0c05f4..ad07ea6 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -292,8 +292,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = gpio_to_irq(GPIO_ETH_IRQ),
- .end = gpio_to_irq(GPIO_ETH_IRQ),
+ .start = pxa_gpio_to_irq(GPIO_ETH_IRQ),
+ .end = pxa_gpio_to_irq(GPIO_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@@ -672,7 +672,7 @@ static struct lis3lv02d_platform_data lis3_pdata = {
.chip_select = 1, \
.controller_data = (void *) GPIO_ACCEL_CS, \
.platform_data = &lis3_pdata, \
- .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \
+ .irq = pxa_gpio_to_irq(GPIO_ACCEL_IRQ), \
}
#define SPI_DAC7512 \
@@ -824,10 +824,10 @@ static void __init raumfeld_power_init(void)
else
gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
- power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
- power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
+ power_supply_resources[0].start = pxa_gpio_to_irq(GPIO_CHARGE_DC_OK);
+ power_supply_resources[0].end = pxa_gpio_to_irq(GPIO_CHARGE_DC_OK);
- ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
+ ret = request_irq(pxa_gpio_to_irq(GPIO_CHARGE_DONE),
&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
"charge_done", NULL);
@@ -956,7 +956,7 @@ static struct eeti_ts_platform_data eeti_ts_pdata = {
static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
.type = "eeti_ts",
.addr = 0x0a,
- .irq = gpio_to_irq(GPIO_TOUCH_IRQ),
+ .irq = pxa_gpio_to_irq(GPIO_TOUCH_IRQ),
.platform_data = &eeti_ts_pdata,
};
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e0..7345799e 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -96,8 +96,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .start = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .end = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -502,7 +502,7 @@ static struct i2c_board_info saar_i2c_info[] = {
.type = "da9034",
.addr = 0x34,
.platform_data = &saar_da9034_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 87070a8..eb9edd9 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -90,7 +90,7 @@ static struct i2c_board_info saarb_i2c_info[] = {
.type = "88PM860x",
.addr = 0x34,
.platform_data = &saarb_pm8607_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 29dc9e7..d0caa9f 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -552,7 +552,7 @@ static struct spi_board_info spitz_spi_devices[] = {
.chip_select = 0,
.platform_data = &spitz_ads7846_info,
.controller_data = &spitz_ads7846_chip,
- .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
+ .irq = pxa_gpio_to_irq(SPITZ_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
.max_speed_hz = 50000,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48b..8752dc0 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -546,7 +546,7 @@ static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
.type = "da9030",
.addr = 0x49,
.platform_data = &imote2_da9030_pdata,
- .irq = gpio_to_irq(1),
+ .irq = pxa_gpio_to_irq(1),
},
};
@@ -913,7 +913,7 @@ static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
.type = "da9030",
.addr = 0x49,
.platform_data = &stargate2_da9030_pdata,
- .irq = gpio_to_irq(1),
+ .irq = pxa_gpio_to_irq(1),
},
};
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb9..7b444e3 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -85,8 +85,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .start = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .end = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd56916..817c9d1 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -101,7 +101,7 @@ static struct i2c_board_info evb3_i2c_info[] = {
.type = "88PM860x",
.addr = 0x34,
.platform_data = &evb3_pm8607_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = pxa_gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 9f69a26..ac1e4da 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -404,8 +404,8 @@ static struct pda_power_pdata tosa_power_data = {
static struct resource tosa_power_resource[] = {
{
.name = "ac",
- .start = gpio_to_irq(TOSA_GPIO_AC_IN),
- .end = gpio_to_irq(TOSA_GPIO_AC_IN),
+ .start = pxa_gpio_to_irq(TOSA_GPIO_AC_IN),
+ .end = pxa_gpio_to_irq(TOSA_GPIO_AC_IN),
.flags = IORESOURCE_IRQ |
IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae..6c63069 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -315,9 +315,9 @@ static void __init viper_init_irq(void)
set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
}
- irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
+ irq_set_chained_handler(pxa_gpio_to_irq(VIPER_CPLD_GPIO),
viper_irq_handler);
- irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
+ irq_set_irq_type(pxa_gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
}
/* Flat Panel */
@@ -422,8 +422,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(VIPER_ETH_GPIO),
- .end = gpio_to_irq(VIPER_ETH_GPIO),
+ .start = pxa_gpio_to_irq(VIPER_ETH_GPIO),
+ .end = pxa_gpio_to_irq(VIPER_ETH_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
[2] = {
@@ -546,7 +546,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
/* External UARTs */
{
.mapbase = VIPER_UARTA_PHYS,
- .irq = gpio_to_irq(VIPER_UARTA_GPIO),
+ .irq = pxa_gpio_to_irq(VIPER_UARTA_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
@@ -556,7 +556,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
},
{
.mapbase = VIPER_UARTB_PHYS,
- .irq = gpio_to_irq(VIPER_UARTB_GPIO),
+ .irq = pxa_gpio_to_irq(VIPER_UARTB_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
@@ -596,8 +596,8 @@ static struct resource isp116x_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = gpio_to_irq(VIPER_USB_GPIO),
- .end = gpio_to_irq(VIPER_USB_GPIO),
+ .start = pxa_gpio_to_irq(VIPER_USB_GPIO),
+ .end = pxa_gpio_to_irq(VIPER_USB_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index a7539a6..261f258 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -610,8 +610,8 @@ static struct resource vpac270_ide_resources[] = {
.flags = IORESOURCE_DMA
},
[3] = { /* IDE IRQ pin */
- .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
- .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+ .start = pxa_gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+ .end = pxa_gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
.flags = IORESOURCE_IRQ
}
};
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 65fed37..4b18474 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -573,7 +573,7 @@ static struct spi_board_info spi_board_info[] __initdata = {
.modalias = "libertas_spi",
.platform_data = &z2_lbs_pdata,
.controller_data = &z2_lbs_chip_info,
- .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ),
+ .irq = pxa_gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ),
.max_speed_hz = 13000000,
.bus_num = 1,
.chip_select = 0,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index c424e7d..dd30cd0 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -136,12 +136,16 @@ static void __init zeus_init_irq(void)
/* Peripheral IRQs. It would be nice to move those inside driver
configuration, but it is not supported at the moment. */
- irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+ irq_set_irq_type(pxa_gpio_to_irq(ZEUS_AC97_GPIO),
+ IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(pxa_gpio_to_irq(ZEUS_WAKEUP_GPIO),
+ IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(pxa_gpio_to_irq(ZEUS_PTT_GPIO),
+ IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(pxa_gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+ IRQ_TYPE_EDGE_FALLING);
+ irq_set_irq_type(pxa_gpio_to_irq(ZEUS_CAN_GPIO),
IRQ_TYPE_EDGE_FALLING);
- irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
/* Setup ISA IRQs */
for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
@@ -151,8 +155,10 @@ static void __init zeus_init_irq(void)
set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
}
- irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
- irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
+ irq_set_irq_type(pxa_gpio_to_irq(ZEUS_ISA_GPIO),
+ IRQ_TYPE_EDGE_RISING);
+ irq_set_chained_handler(pxa_gpio_to_irq(ZEUS_ISA_GPIO),
+ zeus_irq_handler);
}
@@ -233,7 +239,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
{ /* COM1 */
.mapbase = 0x10000000,
- .irq = gpio_to_irq(ZEUS_UARTA_GPIO),
+ .irq = pxa_gpio_to_irq(ZEUS_UARTA_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -242,7 +248,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
},
{ /* COM2 */
.mapbase = 0x10800000,
- .irq = gpio_to_irq(ZEUS_UARTB_GPIO),
+ .irq = pxa_gpio_to_irq(ZEUS_UARTB_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -251,7 +257,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
},
{ /* COM3 */
.mapbase = 0x11000000,
- .irq = gpio_to_irq(ZEUS_UARTC_GPIO),
+ .irq = pxa_gpio_to_irq(ZEUS_UARTC_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -260,7 +266,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
},
{ /* COM4 */
.mapbase = 0x11800000,
- .irq = gpio_to_irq(ZEUS_UARTD_GPIO),
+ .irq = pxa_gpio_to_irq(ZEUS_UARTD_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -321,8 +327,8 @@ static struct resource zeus_dm9k0_resource[] = {
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(ZEUS_ETH0_GPIO),
- .end = gpio_to_irq(ZEUS_ETH0_GPIO),
+ .start = pxa_gpio_to_irq(ZEUS_ETH0_GPIO),
+ .end = pxa_gpio_to_irq(ZEUS_ETH0_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -339,8 +345,8 @@ static struct resource zeus_dm9k1_resource[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = gpio_to_irq(ZEUS_ETH1_GPIO),
- .end = gpio_to_irq(ZEUS_ETH1_GPIO),
+ .start = pxa_gpio_to_irq(ZEUS_ETH1_GPIO),
+ .end = pxa_gpio_to_irq(ZEUS_ETH1_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -423,7 +429,7 @@ static struct spi_board_info zeus_spi_board_info[] = {
[0] = {
.modalias = "mcp2515",
.platform_data = &zeus_mcp2515_pdata,
- .irq = gpio_to_irq(ZEUS_CAN_GPIO),
+ .irq = pxa_gpio_to_irq(ZEUS_CAN_GPIO),
.max_speed_hz = 1*1000*1000,
.bus_num = 3,
.mode = SPI_MODE_0,
@@ -753,7 +759,7 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = {
{
I2C_BOARD_INFO("pca9535", 0x20),
.platform_data = &zeus_pca953x_pdata[2],
- .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+ .irq = pxa_gpio_to_irq(ZEUS_EXTGPIO_GPIO),
},
{ I2C_BOARD_INFO("lm75a", 0x48) },
{ I2C_BOARD_INFO("24c01", 0x50) },
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 6c39c33..28343e0 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -408,8 +408,8 @@ static void __init zylonite_init(void)
* Note: We depend that the bootloader set
* the correct value to MSC register for SMC91x.
*/
- smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
- smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq);
+ smc91x_resources[1].start = pxa_gpio_to_irq(gpio_eth_irq);
+ smc91x_resources[1].end = pxa_gpio_to_irq(gpio_eth_irq);
platform_device_register(&smc91x_device);
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index cd6d210..5ab42f8 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -156,7 +156,7 @@ static inline void update_edge_detect(struct pxa_gpio_chip *c)
static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
{
struct pxa_gpio_chip *c;
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
unsigned long gpdr, mask = GPIO_bit(gpio);
c = gpio_to_pxachip(gpio);
@@ -218,7 +218,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
while (n < BITS_PER_LONG) {
loop = 1;
- generic_handle_irq(gpio_to_irq(gpio_base + n));
+ generic_handle_irq(pxa_gpio_to_irq(gpio_base + n));
n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
}
}
@@ -227,7 +227,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
static void pxa_ack_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
@@ -235,7 +235,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d)
static void pxa_mask_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
uint32_t grer, gfer;
@@ -249,7 +249,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d)
static void pxa_unmask_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
c->irq_mask |= GPIO_bit(gpio);
@@ -282,7 +282,8 @@ void __init pxa_init_gpio(int mux_irq, int start, int end,
__raw_writel(~0,c->regbase + GEDR_OFFSET);
}
- for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+ for (irq = pxa_gpio_to_irq(start); irq <= pxa_gpio_to_irq(end);
+ irq++) {
irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
--
1.7.2.5
More information about the linux-arm-kernel
mailing list