[PATCH 1/2 v3] power: bq20z75: devicetree init support

[Grant Likely]

On Tue, Sep 13, 2011 at 02:20:59PM -0700, Rhyland Klein wrote:
> Adding support to generate platform data when kernel is configured
> through device tree.
> 
> Signed-off-by: Rhyland Klein <rklein at nvidia.com>
> ---
> 	v3: Changed to use "ti," properties
> 	    Changed to use gpio property with flag for polarity
> 	    Removed unnecessary call to of_match_device
> 
>  drivers/power/bq20z75.c |   75 +++++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 75 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c
> index 9c5e5be..bb4afb2 100644
> --- a/drivers/power/bq20z75.c
> +++ b/drivers/power/bq20z75.c
> @@ -613,6 +613,78 @@ static void bq20z75_delayed_work(struct work_struct *work)
>  	}
>  }
>  
> +#if defined(CONFIG_OF)
> +#include <linux/of_device.h>
> +static const struct of_device_id bq20z75_dt_ids[] = {
> +	{ .compatible = "ti,bq20z75" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(platform, bq20z75_dt_ids);
> +
> +static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
> +	struct i2c_client *client)
> +{
> +	const struct of_device_id *dtid;
> +	struct device_node *of_node = client->dev.of_node;
> +	struct bq20z75_platform_data *pdata = client->dev.platform_data;
> +	enum of_gpio_flags gpio_flags;
> +	int rc;
> +	u32 prop;
> +
> +	/* verify this driver matches this device */
> +	if (!of_node)
> +		return NULL;
> +
> +	/* if platform data is set, honor it */
> +	if (pdata)
> +		return pdata;
> +
> +	/* first make sure at least one property is set, otherwise
> +	 * it won't change behavior from running without pdata.
> +	 */
> +	if (!of_get_property(of_node, "ti,i2c-retry-count", NULL) &&
> +		!of_get_property(of_node, "ti,poll-retry-count", NULL) &&
> +		!of_get_property(of_node, "ti,battery-detect-gpios", NULL))
> +		goto of_out;
> +
> +	pdata = devm_kzalloc(&client->dev, sizeof(struct bq20z75_platform_data),
> +				GFP_KERNEL);
> +	if (!pdata)
> +		goto of_out;
> +
> +	rc = of_property_read_u32(of_node, "ti,i2c-retry-count", &prop);
> +	if (!rc)
> +		pdata->i2c_retry_count = prop;
> +
> +	rc = of_property_read_u32(of_node, "ti,poll-retry-count", &prop);
> +	if (!rc)
> +		pdata->poll_retry_count = prop;
> +
> +	if (!of_get_property(of_node, "ti,battery-detect-gpios", NULL)) {
> +		pdata->battery_detect = -1;
> +		goto of_out;
> +	}
> +
> +	pdata->battery_detect = of_get_named_gpio_flags(of_node,
> +			"ti,battery-detect-gpios", 0, &gpio_flags);
> +
> +	if (gpio_flags & OF_GPIO_ACTIVE_LOW)
> +		pdata->battery_detect_present = 0;
> +	else
> +		pdata->battery_detect_present = 1;
> +
> +of_out:
> +	return pdata;
> +}
> +#else
> +#define bq20z75_dt_ids NULL
> +static struct bq20z75_platform_data *bq20z75_of_populate_pdata(
> +	struct i2c_client *client)
> +{
> +	return NULL;
> +}

This looks like the driver will break when !CONFIG_OF.  The caller of
bq20z75_of_populate_pdata will get NULL and therefore won't have any
pdata.

> +#endif
> +
>  static int __devinit bq20z75_probe(struct i2c_client *client,
>  	const struct i2c_device_id *id)
>  {
> @@ -642,6 +714,8 @@ static int __devinit bq20z75_probe(struct i2c_client *client,
>  	bq20z75_device->power_supply.external_power_changed =
>  		bq20z75_external_power_changed;
>  
> +	pdata = bq20z75_of_populate_pdata(client);
> +
>  	if (pdata) {
>  		bq20z75_device->gpio_detect =
>  			gpio_is_valid(pdata->battery_detect);
> @@ -775,6 +849,7 @@ static struct i2c_driver bq20z75_battery_driver = {
>  	.id_table	= bq20z75_id,
>  	.driver = {
>  		.name	= "bq20z75-battery",
> +		.of_match_table = bq20z75_dt_ids,
>  	},
>  };
>  
> -- 
> 1.7.6
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel