[PATCH v2 3/3] arm: mxs: disable clock-gates when setting saif-clocks

Dong Aisheng-B29396 B29396 at freescale.com
Thu Sep 8 04:24:47 EDT 2011


> -----Original Message-----
> From: Uwe Kleine-König [mailto:u.kleine-koenig at pengutronix.de]
> Sent: Thursday, September 08, 2011 2:25 AM
> To: Dong Aisheng-B29396
> Cc: alsa-devel at alsa-project.org; s.hauer at pengutronix.de;
> broonie at opensource.wolfsonmicro.com; lrg at ti.com; linux-arm-
> kernel at lists.infradead.org; w.sang at pengutronix.de
> Subject: Re: [PATCH v2 3/3] arm: mxs: disable clock-gates when setting
> saif-clocks
> 
> On Wed, Sep 07, 2011 at 09:57:38PM +0800, Dong Aisheng wrote:
> > From: Wolfram Sang <w.sang at pengutronix.de>
> >
> > New divides should only be written when gates are off.
> >
> > Reported-by: Dong Aisheng <b29396 at freescale.com>
> > Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
> >
> > ---
> > Changes since v1:
> >  * Fix author name. It should be Wolfram Sang. :)
> >
> > BTW, i did a minus change based on wolfram's patch or the saif will
> > not work.
> >
> > Change
> > +       __raw_writel(clkgate, CLKCTRL_BASE_ADDR +
> > + HW_CLKCTRL_##rs##_SET); \
> > to
> > +       __raw_writel(reg & ~clkgate,					\
> > 			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
> IMHO this is worth to be noted in the commit log.
Yes.

> > It seemed HW_CLKCTRL_##rs##_SET did not work well.
> > (i did not find HW_CLKCTRL_SAIFx_SET in spec).
> > ---
> >  arch/arm/mach-mxs/clock-mx28.c        |    7 +++++--
> >  arch/arm/mach-mxs/regs-clkctrl-mx28.h |    2 ++
> >  2 files changed, 7 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/mach-mxs/clock-mx28.c
> > b/arch/arm/mach-mxs/clock-mx28.c index 33cc2ff..c9d0548 100644
> > --- a/arch/arm/mach-mxs/clock-mx28.c
> > +++ b/arch/arm/mach-mxs/clock-mx28.c
> > @@ -476,7 +476,7 @@ _CLK_SET_RATE1(xbus_clk, XBUS)
> >  static int name##_set_rate(struct clk *clk, unsigned long rate)
> 	\
> >  {									\
> >  	u16 div;							\
> > -	u32 reg;							\
> > +	u32 reg, clkgate;						\
> >  	u64 lrate;							\
> >  	unsigned long parent_rate;					\
> >  	int i;								\
> > @@ -493,7 +493,8 @@ static int name##_set_rate(struct clk *clk,
> unsigned long rate)		\
> >  		return -EINVAL;						\
> >  									\
> >  	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
> > -	reg &= ~BM_CLKCTRL_##rs##_DIV;					\
> > +	clkgate = reg & BM_CLKCTRL_##rs##_CLKGATE;			\
> > +	reg &= ~(BM_CLKCTRL_##rs##_DIV | BM_CLKCTRL_##rs##_CLKGATE);	\
> >  	reg |= div << BP_CLKCTRL_##rs##_DIV;				\
> >  	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
> >  									\
> > @@ -506,6 +507,8 @@ static int name##_set_rate(struct clk *clk,
> unsigned long rate)		\
> >  		return -ETIMEDOUT;					\
> >  	}								\
> >  									\
> > +	__raw_writel(reg & ~clkgate,					\
> > +			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
> >  	return 0;							\
> >  }
> >
> > diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h
> > b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
> > index 7d1b061..08749b3 100644
> > --- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h
> > +++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
> > @@ -285,6 +285,7 @@
> >  		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
> >
> >  #define HW_CLKCTRL_SAIF0	(0x00000100)
> > +#define HW_CLKCTRL_SAIF0_SET	(0x00000104)
> Is this still needed?
No, we may not need this.

For this patch, as discussed with Wolfram before, since we also find
Some other devices have the same issue as SAIF(e.g. SSP),
it looks we may have further work to do on clock-mx28.c.

However the original purpose of sending this patch is for
poeple to easily test.

Regards
Dong Aisheng




More information about the linux-arm-kernel mailing list