[PATCH v7 11/26] gpio/omap: cleanup set_gpio_triggering function
Tarun Kanti DebBarma
tarun.kanti at ti.com
Tue Sep 13 09:02:44 EDT 2011
Getting rid of ifdefs within the function by adding register offset intctrl
and associating OMAPXXXX_GPIO_INT_CONTROL in respective SoC specific files.
Also, use wkup_status register consistently instead of referring to wakeup
clear and wakeup set register offsets.
Signed-off-by: Charulatha V <charu at ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti at ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
arch/arm/mach-omap1/gpio15xx.c | 2 +
arch/arm/mach-omap1/gpio16xx.c | 3 +
arch/arm/mach-omap1/gpio7xx.c | 2 +
arch/arm/plat-omap/include/plat/gpio.h | 3 +
drivers/gpio/gpio-omap.c | 148 ++++++++------------------------
5 files changed, 46 insertions(+), 112 deletions(-)
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index f8c15ea..2adfece 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -42,6 +42,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
.irqstatus = OMAP_MPUIO_GPIO_INT,
.irqenable = OMAP_MPUIO_GPIO_MASKIT,
.irqenable_inv = true,
+ .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE,
};
static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
@@ -83,6 +84,7 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
.irqstatus = OMAP1510_GPIO_INT_STATUS,
.irqenable = OMAP1510_GPIO_INT_MASK,
.irqenable_inv = true,
+ .irqctrl = OMAP1510_GPIO_INT_CONTROL,
};
static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 1eb47e2..46bb57a 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -45,6 +45,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
.irqstatus = OMAP_MPUIO_GPIO_INT,
.irqenable = OMAP_MPUIO_GPIO_MASKIT,
.irqenable_inv = true,
+ .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE,
};
static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
@@ -90,6 +91,8 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
.set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1,
.clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1,
.wkup_en = OMAP1610_GPIO_WAKEUPENABLE,
+ .edgectrl1 = OMAP1610_GPIO_EDGE_CTRL1,
+ .edgectrl2 = OMAP1610_GPIO_EDGE_CTRL2,
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 923eaa1..207a23c 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -47,6 +47,7 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
.irqstatus = OMAP_MPUIO_GPIO_INT / 2,
.irqenable = OMAP_MPUIO_GPIO_MASKIT / 2,
.irqenable_inv = true,
+ .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1,
};
static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
@@ -88,6 +89,7 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
.irqstatus = OMAP7XX_GPIO_INT_STATUS,
.irqenable = OMAP7XX_GPIO_INT_MASK,
.irqenable_inv = true,
+ .irqctrl = OMAP7XX_GPIO_INT_CONTROL,
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 61865b4..92a6262 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -195,6 +195,9 @@ struct omap_gpio_reg_offs {
u16 leveldetect1;
u16 risingdetect;
u16 fallingdetect;
+ u16 irqctrl;
+ u16 edgectrl1;
+ u16 edgectrl2;
bool irqenable_inv;
};
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 9715cf2..e51804b 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -199,49 +199,25 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
__raw_writel(val, reg);
}
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
+static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
int trigger)
{
void __iomem *base = bank->base;
u32 gpio_bit = 1 << gpio;
- if (cpu_is_omap44xx()) {
- _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
- } else {
- _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
- }
- if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
- if (cpu_is_omap44xx()) {
- _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit,
- trigger != 0);
- } else {
- /*
- * GPIO wakeup request can only be generated on edge
- * transitions
- */
- if (trigger & IRQ_TYPE_EDGE_BOTH)
- __raw_writel(1 << gpio, bank->base
- + OMAP24XX_GPIO_SETWKUENA);
- else
- __raw_writel(1 << gpio, bank->base
- + OMAP24XX_GPIO_CLEARWKUENA);
- }
- }
+ _gpio_rmw(base, bank->regs->leveldetect0, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_LOW);
+ _gpio_rmw(base, bank->regs->leveldetect1, gpio_bit,
+ trigger & IRQ_TYPE_LEVEL_HIGH);
+ _gpio_rmw(base, bank->regs->risingdetect, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_RISING);
+ _gpio_rmw(base, bank->regs->fallingdetect, gpio_bit,
+ trigger & IRQ_TYPE_EDGE_FALLING);
+
+ if (likely(!(bank->non_wakeup_gpios & gpio_bit)))
+ _gpio_rmw(base, bank->regs->wkup_en, gpio_bit,
+ trigger != 0);
+
/* This part needs to be executed always for OMAP{34xx, 44xx} */
if (cpu_is_omap34xx() || cpu_is_omap44xx() ||
(bank->non_wakeup_gpios & gpio_bit)) {
@@ -261,7 +237,6 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
__raw_readl(bank->base + bank->regs->leveldetect0) |
__raw_readl(bank->base + bank->regs->leveldetect1);
}
-#endif
#ifdef CONFIG_ARCH_OMAP1
/*
@@ -273,23 +248,10 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
void __iomem *reg = bank->base;
u32 l = 0;
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
- break;
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_CONTROL;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_CONTROL;
- break;
-#endif
- default:
+ if (!bank->regs->irqctrl)
return;
- }
+
+ reg += bank->regs->irqctrl;
l = __raw_readl(reg);
if ((l >> gpio) & 1)
@@ -299,31 +261,21 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
__raw_writel(l, reg);
}
+#else
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
#endif
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
{
void __iomem *reg = bank->base;
+ void __iomem *base = bank->base;
u32 l = 0;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
- l = __raw_readl(reg);
- if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- bank->toggle_mask |= 1 << gpio;
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 1 << gpio;
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
- l &= ~(1 << gpio);
- else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_CONTROL;
+ if (bank->regs->leveldetect0 && bank->regs->wkup_en) {
+ set_gpio_trigger(bank, gpio, trigger);
+ } else if (bank->regs->irqctrl) {
+ reg += bank->regs->irqctrl;
+
l = __raw_readl(reg);
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
@@ -332,15 +284,15 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else if (trigger & IRQ_TYPE_EDGE_FALLING)
l &= ~(1 << gpio);
else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
+ return -EINVAL;
+
+ __raw_writel(l, reg);
+ } else if (bank->regs->edgectrl1) {
if (gpio & 0x08)
- reg += OMAP1610_GPIO_EDGE_CTRL2;
+ reg += bank->regs->edgectrl2;
else
- reg += OMAP1610_GPIO_EDGE_CTRL1;
+ reg += bank->regs->edgectrl1;
+
gpio &= 0x07;
l = __raw_readl(reg);
l &= ~(3 << (gpio << 1));
@@ -348,40 +300,12 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
l |= 2 << (gpio << 1);
if (trigger & IRQ_TYPE_EDGE_FALLING)
l |= 1 << (gpio << 1);
- if (trigger)
- /* Enable wake-up during idle for dynamic tick */
- __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
- else
- __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_CONTROL;
- l = __raw_readl(reg);
- if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- bank->toggle_mask |= 1 << gpio;
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 1 << gpio;
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
- l &= ~(1 << gpio);
- else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
- set_24xx_gpio_triggering(bank, gpio, trigger);
- return 0;
-#endif
- default:
- goto bad;
+
+ /* Enable wake-up during idle for dynamic tick */
+ _gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger);
+ __raw_writel(l, reg);
}
- __raw_writel(l, reg);
return 0;
-bad:
- return -EINVAL;
}
static int gpio_irq_type(struct irq_data *d, unsigned type)
--
1.7.0.4
More information about the linux-arm-kernel
mailing list