[PATCH 0/3] GIC OF bindings
Mitch Bradley
wmb at firmworks.com
Wed Sep 21 00:58:12 EDT 2011
On 9/20/2011 6:14 PM, Grant Likely wrote:
> On Tue, Sep 20, 2011 at 8:49 PM, David Miller<davem at davemloft.net> wrote:
>> From: Rob Herring<robherring2 at gmail.com>
>> Date: Tue, 20 Sep 2011 15:24:01 -0500
>>
>>> Hopefully, this is the final or near final version of GIC binding support.
>>>
>>> Changes from the previous version:
>>> - SPIs and PPIs are numbered starting at 0. Now the gic has it's own irq
>>> domain translate function instead of the simple domain one.
>>> - interrupt cell format has changed based on Grant's proposal.
>>> - Dropped "ARM: gic: allow irq_start to be 0". Instead, the first 16 irqs
>>> are skipped and the domain irq_base adjusted accordingly.
>>> - Added a fix to of_irq_find_parent when the parent == child.
>>> - Renamed intc_desc.parent to intc_desc.interrupt_parent.
>>> - Implemented Grant's algorithm for walking the list of interrupt
>>> controllers. Added a return value to interrupt init functions, so they
>>> don't get added to the parent list on a init failure.
>>>
>>> The changes are significant enough that I did not include previous
>>> acked/reviewed/tested-by's.
>>
>> Just out of curiosity where does this "interrupt-parent" property
>> come from?
>>
>> On platforms I am familiar with, the parent path is walked to the root
>> and we stop at device nodes that have "interrupt-map" and
>> "interrupt-map-mask" properties.
>>
>> The map and mask are applied to the "reg" property of the device in
>> question to see which map entry matches, if a match is found the map
>> entry contains the translated interrupt.
>>
>> And this process continues over and over all the way to the root to get
>> the system interrupt that processor actually deals with.
>>
>> The mechanism shown here seems overly simplistic and not able to handle
>> the cases handled by existing OF property schemes in use for several
>> years on real systems.
>
> interrupt-parent has been implemented for years on powerpc. I don't
> know if it was ever an Open Firmware thing, but it is in ePAPR [1],
> and ARM isn't doing anything novel in that regard.
interrupt-parent has been part of the interrupt mapping spec from the
inception of same.
http://www.openfirmware.info/docs/rec.intmap.d09.pdf
>
> [1] section 2.4, page 30,
> https://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.1.pdf
>
> It is true that is cannot handle all situations, but for those
> interrupt-map is still available.
>
> g.
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
>
>
More information about the linux-arm-kernel
mailing list