[PATCH 3/3] ARM: CSR: PM: add sleep entry for SiRFprimaII
Barry Song
Baohua.Song at csr.com
Tue Sep 13 06:06:33 EDT 2011
From: Rongjun Ying <rongjun.ying at csr.com>
Signed-off-by: Rongjun Ying <rongjun.ying at csr.com>
Signed-off-by: Barry Song <Baohua.Song at csr.com>
---
Due to L2 cache will lose power and data in suspend cycle, prima2 actually requires
the whole l2 cache flushed while suspending and re-initilized after resuming just
like code boot.
So the "ARM: CSR: PM: add sleep entry for SiRFprimaII" depends on:
Shawn Guo <shawn.guo at linaro.org>'s
[PATCH v2 1/2] ARM: cache-l2x0: remove __init annotation from initialization functions
http://www.spinics.net/lists/arm-kernel/msg139198.html
arch/arm/mach-prima2/Makefile | 1 +
arch/arm/mach-prima2/pm.c | 150 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-prima2/pm.h | 31 +++++++++
arch/arm/mach-prima2/sleep.S | 64 +++++++++++++++++
4 files changed, 246 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-prima2/pm.c
create mode 100644 arch/arm/mach-prima2/pm.h
create mode 100644 arch/arm/mach-prima2/sleep.S
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index f49d70b..13dd160 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -6,3 +6,4 @@ obj-y += prima2.o
obj-y += rtciobrg.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_CACHE_L2X0) += l2x0.o
+obj-$(CONFIG_SUSPEND) += pm.o sleep.o
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
new file mode 100644
index 0000000..0109729
--- /dev/null
+++ b/arch/arm/mach-prima2/pm.c
@@ -0,0 +1,150 @@
+/*
+ * power management entry for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/rtc/sirfsoc_rtciobrg.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "pm.h"
+
+/*
+ * suspend asm codes will access these to make DRAM become self-refresh and
+ * system sleep
+ */
+u32 sirfsoc_pwrc_base;
+void __iomem *sirfsoc_memc_base;
+
+static void sirfsoc_set_wakeup_source(void)
+{
+ u32 pwr_trigger_en_reg;
+ pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_TRIGGER_EN);
+#define X_ON_KEY_B (1 << 0)
+ sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B,
+ sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN);
+}
+
+static void sirfsoc_set_sleep_mode(u32 mode)
+{
+ u32 sleep_mode = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_PDN_CTRL);
+ sleep_mode &= ~(SIRFSOC_SLEEP_MODE_MASK << 1);
+ sleep_mode |= mode << 1;
+ sirfsoc_rtc_iobrg_writel(sleep_mode, sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_PDN_CTRL);
+}
+
+static int sirfsoc_pre_suspend_power_off(void)
+{
+ u32 wakeup_entry = virt_to_phys(cpu_resume);
+
+ sirfsoc_rtc_iobrg_writel(wakeup_entry, sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_SCRATCH_PAD1);
+
+ sirfsoc_set_wakeup_source();
+
+ sirfsoc_set_sleep_mode(SIRFSOC_DEEP_SLEEP_MODE);
+
+ return 0;
+}
+
+static int sirfsoc_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ sirfsoc_pre_suspend_power_off();
+
+ outer_flush_all();
+ outer_disable();
+ /* go zzz */
+ cpu_suspend(0, sirfsoc_finish_suspend);
+ l2x0_of_init(0x40000, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct platform_suspend_ops sirfsoc_pm_ops = {
+ .enter = sirfsoc_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init sirfsoc_pm_init(void)
+{
+ suspend_set_ops(&sirfsoc_pm_ops);
+ return 0;
+}
+late_initcall(sirfsoc_pm_init);
+
+static const struct of_device_id pwrc_ids[] = {
+ { .compatible = "sirf,prima2-pwrc" },
+ {}
+};
+
+static int __init sirfsoc_of_pwrc_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, pwrc_ids);
+ if (!np)
+ panic("unable to find compatible pwrc node in dtb\n");
+
+ /*
+ * pwrc behind rtciobrg is not located in memory space
+ * though the property is named reg. reg only means base
+ * offset for pwrc. then of_iomap is not suitable here.
+ */
+ if (of_property_read_u32(np, "reg", &sirfsoc_pwrc_base))
+ panic("unable to find base address of pwrc node in dtb\n");
+
+ of_node_put(np);
+
+ return 0;
+}
+postcore_initcall(sirfsoc_of_pwrc_init);
+
+static const struct of_device_id memc_ids[] = {
+ { .compatible = "sirf,prima2-memc" },
+ {}
+};
+
+static int __devinit sirfsoc_memc_probe(struct platform_device *op)
+{
+ struct device_node *np = op->dev.of_node;
+
+ sirfsoc_memc_base = of_iomap(np, 0);
+ if (!sirfsoc_memc_base)
+ panic("unable to map memc registers\n");
+
+ return 0;
+}
+
+static struct platform_driver sirfsoc_memc_driver = {
+ .probe = sirfsoc_memc_probe,
+ .driver = {
+ .name = "sirfsoc-memc",
+ .owner = THIS_MODULE,
+ .of_match_table = memc_ids,
+ },
+};
+
+static int __init sirfsoc_memc_init(void)
+{
+ return platform_driver_register(&sirfsoc_memc_driver);
+}
+postcore_initcall(sirfsoc_memc_init);
diff --git a/arch/arm/mach-prima2/pm.h b/arch/arm/mach-prima2/pm.h
new file mode 100644
index 0000000..aa2b428
--- /dev/null
+++ b/arch/arm/mach-prima2/pm.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-prima2/pm.h
+ *
+ * Copyright (C) 2011 CSR
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _MACH_PRIMA2_PM_H_
+#define _MACH_PRIMA2_PM_H_
+
+#define SIRFSOC_PWR_SLEEPFORCE 0x01
+
+#define SIRFSOC_SLEEP_MODE_MASK 0x3
+#define SIRFSOC_DEEP_SLEEP_MODE 0x1
+
+#define SIRFSOC_PWRC_PDN_CTRL 0x0
+#define SIRFSOC_PWRC_PON_OFF 0x4
+#define SIRFSOC_PWRC_TRIGGER_EN 0x8
+#define SIRFSOC_PWRC_PIN_STATUS 0x14
+#define SIRFSOC_PWRC_SCRATCH_PAD1 0x18
+#define SIRFSOC_PWRC_SCRATCH_PAD2 0x1C
+
+#ifndef __ASSEMBLY__
+extern int sirfsoc_finish_suspend(unsigned long);
+#endif
+
+#endif
+
diff --git a/arch/arm/mach-prima2/sleep.S b/arch/arm/mach-prima2/sleep.S
new file mode 100644
index 0000000..0745abc
--- /dev/null
+++ b/arch/arm/mach-prima2/sleep.S
@@ -0,0 +1,64 @@
+/*
+ * sleep mode for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+#define DENALI_CTL_22_OFF 0x58
+#define DENALI_CTL_112_OFF 0x1c0
+
+ .text
+
+ENTRY(sirfsoc_finish_suspend)
+ @ r5: mem controller
+ ldr r0, =sirfsoc_memc_base
+ ldr r5, [r0]
+ @ r6: pwrc base offset
+ ldr r0, =sirfsoc_pwrc_base
+ ldr r6, [r0]
+ @ r7: rtc iobrg controller
+ ldr r0, =sirfsoc_rtciobrg_base
+ ldr r7, [r0]
+
+ @ Read the power control register and set the
+ @ sleep force bit.
+ add r0, r6, #SIRFSOC_PWRC_PDN_CTRL
+ bl __sirfsoc_rtc_iobrg_readl
+ orr r0,r0,#SIRFSOC_PWR_SLEEPFORCE
+ add r1, r6, #SIRFSOC_PWRC_PDN_CTRL
+ bl sirfsoc_rtc_iobrg_pre_writel
+ mov r1, #0x1
+
+ @ read the MEM ctl register and set the self
+ @ refresh bit
+
+ ldr r2, [r5, #DENALI_CTL_22_OFF]
+ orr r2, r2, #0x1
+
+ @ Following code has to run from cache since
+ @ the RAM is going to self refresh mode
+ .align 5
+ str r2, [r5, #DENALI_CTL_22_OFF]
+
+1:
+ ldr r4, [r5, #DENALI_CTL_112_OFF]
+ tst r4, #0x1
+ bne 1b
+
+ @ write SLEEPFORCE through rtc iobridge
+
+ str r1, [r7]
+ @ wait rtc io bridge sync
+1:
+ ldr r3, [r7]
+ tst r3, #0x01
+ bne 1b
+ b .
--
1.7.1
Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom
More information can be found at www.csr.com. Follow CSR on Twitter at http://twitter.com/CSR_PLC and read our blog at www.csr.com/blog
More information about the linux-arm-kernel
mailing list