[RFC PATCH 02/14] ARM: RealView: convert to CONFIG_MULTI_IRQ_HANDLER
Marc Zyngier
marc.zyngier at arm.com
Fri Sep 23 12:51:20 EDT 2011
Convert the RealView platforms to be using the gic_handle_irq
function as their primary interrupt handler.
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-realview/include/mach/entry-macro.S | 2 --
arch/arm/mach-realview/realview_eb.c | 1 +
arch/arm/mach-realview/realview_pb1176.c | 1 +
arch/arm/mach-realview/realview_pb11mp.c | 1 +
arch/arm/mach-realview/realview_pba8.c | 1 +
arch/arm/mach-realview/realview_pbx.c | 1 +
7 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 472a7f8..6c31cc2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -262,6 +262,7 @@ config ARCH_REALVIEW
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
+ select MULTI_IRQ_HANDLER
help
This enables support for ARM Ltd RealView boards.
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
index 4071164..e8a5179 100644
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -7,8 +7,6 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 427e44e..f01e332 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -470,6 +470,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_eb_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_eb_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 863f286..539cde3 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -365,6 +365,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pb1176_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pb1176_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 6cb8318..32d18e5 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -367,6 +367,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pb11mp_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pb11mp_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 3db72c5..0896cc4 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -317,6 +317,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pba8_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pba8_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 7e5d540..eaedeaa 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -400,6 +400,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pbx_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pbx_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
--
1.7.0.4
More information about the linux-arm-kernel
mailing list