[PATCH V5 0/6] ARM: S5P64X0: Add Framebuffer support

Ajay kumar ajaynumb at gmail.com
Wed Sep 21 09:00:40 EDT 2011


Hi Kukjin,

On Wed, Sep 21, 2011 at 5:43 PM, Kukjin Kim <kgene.kim at samsung.com> wrote:
> Ajay Kumar wrote:
>>
>>  The patches are created against "for-next" branch of Kukjin Kim's tree
> at:
>>  git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
>>
>>  Changes since V1:
>>       - Remove mach/regs-fb.h, instead use plat/regs-fb.h.
>>       - Add common pdata for FB and LCD in SMDK6440 and SMDK6450.
>>       - Modify names(s5p-->smdk), max_bpp and refresh rate.
>>       - Modify variable name(cfg-->chipid).
>>       - Use __raw_readl, __raw_writel instead of readl and writel.
>>
>>  Changes since V2:
>>       -Change name of the config-COMMON_FB to SMDK64X0_COMMON_FB.
>>       -Change filename common-fb.h to smdk64x0-common-fb.h.
>>       -Change filename common-fb.c to smdk64x0-common-fb.c.
>>
>>  Changes since V3:
>>       -Add FB and LCD plat-data in corresponding machine files
>>        instead of creating common file smdk64x0-common-fb.c.
>>       -Modify name S5P64X0_SETUP_FB to S5P64X0_SETUP_FB_24BPP.
>>       -Modify file name setup-fb.c to setup-fb-24bpp.c.
>>       -Move SPCON settings to machine file.
>>       -Use soc_is_s5p6440()/soc_is_s5p6450() to check CPU ID.
>>
>>  Changes since V4:
>>       -Removed refresh rate from plat data(s3c_fb_pd_win)
>>       -Fixed complation warning:"function declaration isn't a prototype"
>>        for s5p6440_set_lcd_interface() and s5p6450_set_lcd_interface().
>>
>>
>>   These patches have dependency on the patch:
>>   "ARM: S5P64X0: Fix mask value for S5P64X0 CPU IDs",
>>   at http://www.spinics.net/lists/arm-kernel/msg138990.html
>>
>> o To Kukjin,
>>   [PATCH RESEND V5 1/6] video: s3c-fb: Add S5P64X0 specific
>> s3c_fb_driverdata
>>   [PATCH RESEND V5 2/6] ARM: S5P64X0: Add register base and IRQ for
>> Framebuffer
>>   [PATCH RESEND V5 3/6] ARM: S5P64X0: Set s3c_device_fb name
>>   [PATCH RESEND V5 4/6] ARM: S5P64X0: Add GPIO setup for LCD
>>   [PATCH V5 5/6]ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer
>> support
>>   [PATCH V5 6/6]ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer
>> support
>>
>>  arch/arm/mach-s5p64x0/Kconfig                  |   10 +++
>>  arch/arm/mach-s5p64x0/Makefile                 |    1 +
>>  arch/arm/mach-s5p64x0/cpu.c                    |    3 +
>>  arch/arm/mach-s5p64x0/include/mach/irqs.h      |    4 +
>>  arch/arm/mach-s5p64x0/include/mach/map.h       |    3 +
>>  arch/arm/mach-s5p64x0/include/mach/regs-gpio.h |    4 +
>>  arch/arm/mach-s5p64x0/mach-smdk6440.c          |   74
>> +++++++++++++++++++++++
>>  arch/arm/mach-s5p64x0/mach-smdk6450.c          |   75
>> ++++++++++++++++++++++++
>>  arch/arm/mach-s5p64x0/setup-fb-24bpp.c         |   29 +++++++++
>>  arch/arm/plat-samsung/include/plat/fb.h        |    7 ++
>>  drivers/video/s3c-fb.c                         |   27 +++++++++
>>  11 files changed, 237 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/mach-s5p64x0/setup-fb-24bpp.c
>
> Looks ok to me, will apply.
>
> But as I said, the 'video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata'
> should be sent to Florian's tree.

Yes. This patch was submitted to fbdev mailing list and Florian has
already accepted it. Here is the link:
http://lists.infradead.org/pipermail/linux-arm-kernel/2011-September/065154.html

> I think, it's enough to re-send it to Florian Tobias Schandina.
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Ajay



More information about the linux-arm-kernel mailing list