[PATCH v2 1/4] ARM: mx53: Add pads for flexcan pins
Sascha Hauer
s.hauer at pengutronix.de
Mon Sep 19 06:33:29 EDT 2011
On Fri, Sep 09, 2011 at 05:00:05PM -0300, Rogerio Pimentel wrote:
> Adding pads for flexcan on i.MX53
>
> Signed-off-by: Rogerio Pimentel <rogerio.pimentel at freescale.com>
Can you please rebase this onto:
git://git.pengutronix.de/git/imx/linux-2.6.git imx-cleanup
Sascha
> ---
> Changes since v1:
> Assigned only one pad config for CAN pins
> arch/arm/plat-mxc/include/mach/iomux-mx53.h | 22 ++++++++++++----------
> 1 files changed, 12 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
> index 5408fd1..d890c9c 100644
> --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
> +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
> @@ -33,6 +33,8 @@
> #define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \
> PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \
> | PAD_CTL_HYS)
> +#define MX53_CAN_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
> + PAD_CTL_HYS)
>
> #define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0)
> #define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0)
> @@ -1243,14 +1245,14 @@
> #define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID (_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL2__KPP_COL_2 (_MX53_PAD_KEY_COL2__KPP_COL_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL2__GPIO4_10 (_MX53_PAD_KEY_COL2__GPIO4_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
> -#define MX53_PAD_KEY_COL2__CAN1_TXCAN (_MX53_PAD_KEY_COL2__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_KEY_COL2__CAN1_TXCAN (_MX53_PAD_KEY_COL2__CAN1_TXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_KEY_COL2__FEC_MDIO (_MX53_PAD_KEY_COL2__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL2__ECSPI1_SS1 (_MX53_PAD_KEY_COL2__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL2__FEC_RDATA_2 (_MX53_PAD_KEY_COL2__FEC_RDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE (_MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_ROW2__KPP_ROW_2 (_MX53_PAD_KEY_ROW2__KPP_ROW_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_ROW2__GPIO4_11 (_MX53_PAD_KEY_ROW2__GPIO4_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
> -#define MX53_PAD_KEY_ROW2__CAN1_RXCAN (_MX53_PAD_KEY_ROW2__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_KEY_ROW2__CAN1_RXCAN (_MX53_PAD_KEY_ROW2__CAN1_RXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_KEY_ROW2__FEC_MDC (_MX53_PAD_KEY_ROW2__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_ROW2__ECSPI1_SS2 (_MX53_PAD_KEY_ROW2__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_ROW2__FEC_TDATA_2 (_MX53_PAD_KEY_ROW2__FEC_TDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
> @@ -1273,14 +1275,14 @@
> #define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL4__KPP_COL_4 (_MX53_PAD_KEY_COL4__KPP_COL_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL4__GPIO4_14 (_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
> -#define MX53_PAD_KEY_COL4__CAN2_TXCAN (_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_KEY_COL4__CAN2_TXCAN (_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_KEY_COL4__IPU_SISG_4 (_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
> #define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC (_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 (_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_ROW4__KPP_ROW_4 (_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_ROW4__GPIO4_15 (_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
> -#define MX53_PAD_KEY_ROW4__CAN2_RXCAN (_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_KEY_ROW4__CAN2_RXCAN (_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_KEY_ROW4__IPU_SISG_5 (_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
> #define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR (_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
> @@ -2053,25 +2055,25 @@
> #define MX53_PAD_PATA_INTRQ__PATA_INTRQ (_MX53_PAD_PATA_INTRQ__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_INTRQ__GPIO7_2 (_MX53_PAD_PATA_INTRQ__GPIO7_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_INTRQ__UART2_CTS (_MX53_PAD_PATA_INTRQ__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
> -#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN (_MX53_PAD_PATA_INTRQ__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN (_MX53_PAD_PATA_INTRQ__CAN1_TXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 (_MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 (_MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_DIOR__PATA_DIOR (_MX53_PAD_PATA_DIOR__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_DIOR__GPIO7_3 (_MX53_PAD_PATA_DIOR__GPIO7_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_DIOR__UART2_RTS (_MX53_PAD_PATA_DIOR__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
> -#define MX53_PAD_PATA_DIOR__CAN1_RXCAN (_MX53_PAD_PATA_DIOR__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_PATA_DIOR__CAN1_RXCAN (_MX53_PAD_PATA_DIOR__CAN1_RXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 (_MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B (_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_RESET_B__GPIO7_4 (_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
> #define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
> -#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 (_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_IORDY__PATA_IORDY (_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_IORDY__GPIO7_5 (_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
> #define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
> -#define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 (_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_DA_0__PATA_DA_0 (_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_PATA_DA_0__GPIO7_6 (_MX53_PAD_PATA_DA_0__GPIO7_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
> @@ -2341,7 +2343,7 @@
> #define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_GPIO_7__EPIT1_EPITO (_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
> -#define MX53_PAD_GPIO_7__CAN1_TXCAN (_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_GPIO_7__CAN1_TXCAN (_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
> #define MX53_PAD_GPIO_7__FIRI_RXD (_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_GPIO_7__SPDIF_PLOCK (_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
> @@ -2349,7 +2351,7 @@
> #define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 (_MX53_PAD_GPIO_8__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_GPIO_8__GPIO1_8 (_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_GPIO_8__EPIT2_EPITO (_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
> -#define MX53_PAD_GPIO_8__CAN1_RXCAN (_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
> +#define MX53_PAD_GPIO_8__CAN1_RXCAN (_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(MX53_CAN_PAD_CTRL))
> #define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
> #define MX53_PAD_GPIO_8__FIRI_TXD (_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
> #define MX53_PAD_GPIO_8__SPDIF_SRCLK (_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
> --
> 1.7.1
>
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list