[PATCH 13/13] OMAP2+: board-generic: Remove i2c static init

Benoit Cousson b-cousson at ti.com
Mon Sep 26 12:50:21 EDT 2011


This mainly reverts the commit that was adding the i2c static init.

Since the i2c and twl nodes are now present, there is no need
for the static initialization anymore.

Signed-off-by: Benoit Cousson <b-cousson at ti.com>
Cc: Tony Lindgren <tony at atomide.com>
---
 arch/arm/mach-omap2/board-generic.c |   41 +---------------------------------
 1 files changed, 2 insertions(+), 39 deletions(-)

diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 1186a76..dcbd64c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -11,7 +11,6 @@
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
-#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/arch.h>
@@ -19,31 +18,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <mach/omap4-common.h>
-#include "common-board-devices.h"
 
-/*
- * XXX: Still needed to boot until the i2c & twl driver is adapted to
- * device-tree
- */
-static struct twl4030_platform_data sdp4430_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-};
-
-static void __init omap4_i2c_init(void)
-{
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
-}
-
-static struct twl4030_platform_data beagle_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-};
-
-static void __init omap3_i2c_init(void)
-{
-	omap3_pmic_init("twl4030", &beagle_twldata);
-}
 
 static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ .compatible = "simple-bus", },
@@ -69,18 +44,6 @@ static void __init omap_generic_init(void)
 	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
 }
 
-static void __init omap4_init(void)
-{
-	omap4_i2c_init();
-	omap_generic_init();
-}
-
-static void __init omap3_init(void)
-{
-	omap3_i2c_init();
-	omap_generic_init();
-}
-
 #if defined(CONFIG_SOC_OMAP2420)
 static const char *omap242x_boards_compat[] __initdata = {
 	"ti,omap2420",
@@ -126,7 +89,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
-	.init_machine	= omap3_init,
+	.init_machine	= omap_generic_init,
 	.timer		= &omap3_timer,
 	.dt_compat	= omap3_boards_compat,
 MACHINE_END
@@ -143,7 +106,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
-	.init_machine	= omap4_init,
+	.init_machine	= omap_generic_init,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,
 MACHINE_END
-- 
1.7.0.4




More information about the linux-arm-kernel mailing list