[PATCH 2/2 v2] power: bq20z75: Add Device Tree Binding

Grant Likely grant.likely at secretlab.ca
Mon Sep 12 16:43:39 EDT 2011


On Fri, Sep 09, 2011 at 05:47:49PM -0700, Rhyland Klein wrote:
> Adding the binding for the TI bq20z75 fuel gadge and the
> bq20z75 driver.
> 
> Signed-off-by: Rhyland Klein <rklein at nvidia.com>
> ---
>  .../bindings/power_supply/ti_bq20z75.txt           |   25 ++++++++++++++++++++
>  1 files changed, 25 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
> 
> diff --git a/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
> new file mode 100644
> index 0000000..3deccfe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power_supply/ti_bq20z75.txt
> @@ -0,0 +1,25 @@
> +TI bq20z75
> +~~~~~~~~~~
> +
> +Required properties :
> + - compatible : "ti,bq20z75"
> +
> +Optional properties :
> + - i2c-retry-count : The number of times to retry i2c transactions on i2c
> +   IO failure.
> + - poll-retry-count : The number of times to try looking for new status
> +   after an external change notification.

Prefix custom properties with a vendor string.  ie. "ti,"

> + - battery-detect : The GPIO which is used to detect battery presence.
> + - battery-detect-present : The state of the GPIO when the battery is
> +   present ( 0 or 1).

Use the gpios binding here.  Should be encoded as a single property
that uses the flags field for the polarity.  Something like:

	battery-detect-gpios = <&gpio-controller 10 0>;

g.




More information about the linux-arm-kernel mailing list