[PATCH 0/3] Add support for tegra2 based ventana board

[Peter De Schrijver]

This patch set adds support for the tegra2 based ventana development board.

Boot tested on ventana.

Peter De Schrijver (3):
  arm/tegra: prepare Seaboard pinmux code for derived boards
  arm/tegra: add support for ventana pinmuxing
  arm/tegra: device tree support for ventana board

 arch/arm/boot/dts/tegra-ventana.dts         |   32 ++++++++++++++
 arch/arm/mach-tegra/Kconfig                 |    6 +++
 arch/arm/mach-tegra/Makefile.boot           |    1 +
 arch/arm/mach-tegra/board-dt.c              |    5 ++-
 arch/arm/mach-tegra/board-seaboard-pinmux.c |   63 ++++++++++++++++++++++++---
 5 files changed, 100 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm/boot/dts/tegra-ventana.dts