[PATCH 04/11] ARM: pm: avoid writing the auxillary control register for ARMv7

[Russell King - ARM Linux]

For ARMv7 kernels running in the non-secure world, writing to the
auxillary control register causes an abort, so we must avoid directly
writing the auxillary control register.  If the ACR has already been
reinitialized by SoC code, don't try to restore it.

Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
 arch/arm/mm/proc-v7.S |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index a773f4e..9049c07 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -248,7 +248,9 @@ ENTRY(cpu_v7_do_resume)
 	mcr	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r8, c2, c0, 1	@ TTB 1
 	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
+	teq	r4, r10			@ Is it already set?
+	mcrne	p15, 0, r10, c1, c0, 1	@ No, so write it
 	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access control
 	ldr	r4, =PRRR		@ PRRR
 	ldr	r5, =NMRR		@ NMRR
-- 
1.7.4.4