[PATCH 3/6] ARM: mach-omap1: clean up debug-macro.S

[Nicolas Pitre]

This achieves two goals:

1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users
   of PLAT_PHYS_OFFSET.

2) Remove the probing of the M bit in the CP15 control reg and make
   the access to the .data variables completely position independent.

Signed-off-by: Nicolas Pitre <nicolas.pitre at linaro.org>
---
 arch/arm/mach-omap1/include/mach/debug-macro.S |   34 ++++++++++-------------
 1 files changed, 15 insertions(+), 19 deletions(-)

diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 6a17118..be01b66 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,13 +13,8 @@
 
 #include <linux/serial_reg.h>
 
-#include <asm/memory.h>
-
 #include <plat/serial.h>
 
-#define omap_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
 		.pushsection .data
 omap_uart_phys:	.word	0x0
 omap_uart_virt:	.word	0x0
@@ -34,13 +29,13 @@ omap_uart_virt:	.word	0x0
 		.macro	addruart, rp, rv, tmp
 
 		/* Use omap_uart_phys/virt if already configured */
-9:		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
-		ldrne	\rp, =omap_uart_phys	@ MMU enabled
-		add	\rv, \rp, #4		@ omap_uart_virt
-		ldr	\rp, [\rp, #0]
-		ldr	\rv, [\rv, #0]
+9:		adr	\rp, 11f		@ get effective addr of 11f
+		ldr	\rv, [\rp]		@ get absolute addr of 11f
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
+		sub	\tmp, \rp, \rv		@ make it effective
+		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
+		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
 		cmp	\rp, #0			@ is port configured?
 		cmpne	\rv, #0
 		bne	99f			@ already configured
@@ -72,16 +67,17 @@ omap_uart_virt:	.word	0x0
 
 		/* Store both phys and virt address for the uart */
 98:		add	\rp, \rp, #0xff000000	@ phys base
-		mrc	p15, 0, \rv, c1, c0
-		tst	\rv, #1			@ MMU enabled?
-		ldreq	\rv, =omap_uart_v2p(omap_uart_phys)	@ MMU disabled
-		ldrne	\rv, =omap_uart_phys	@ MMU enabled
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #0]		@ omap_uart_phys
 		sub	\rp, \rp, #0xff000000	@ phys base
 		add	\rp, \rp, #0xfe000000	@ virt base
-		add	\rv, \rv, #4		@ omap_uart_lsr
-		str	\rp, [\rv, #0]
+		str	\rp, [\tmp, #4]		@ omap_uart_virt
 		b	9b
+
+		.align
+11:		.word	.
+		.word	omap_uart_phys
+		.ltorg
+
 99:
 		.endm
 
-- 
1.7.4