[GIT PULL] OMAP voltage layer cleanup for v3.2
Kevin Hilman
khilman at ti.com
Thu Sep 15 15:32:59 EDT 2011
Tony,
Please pull the OMAP voltage layer cleanup for v3.2.
This is a combination of the series A..E that have been posted, with
a handful of updates throughout the comments and kerneldoc.
It is based on the powerdomain/clockdomain OMAP_CHIP cleanup from Paul
(his pwrdm_clkdm_remove_omap_chip_cleanup_3.2 branch.)
Thanks,
Kevin
The following changes since commit 8179488a36985d4929cf89be5d9171145a769511:
OMAP: powerdomain: remove omap_chip bitmasks (2011-09-14 17:20:44 -0600)
are available in the git repository at:
git://gitorious.org/khilman/linux-omap-pm.git for_3.2/voltage-cleanup
Benoit Cousson (1):
OMAP4: powerdomain data: add voltage domains
Kevin Hilman (48):
OMAP2+: hwmod: remove unused voltagedomain pointer
OMAP2+: voltage: move PRCM mod offets into VC/VP structures
OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain
OMAP2+: voltage: start towards a new voltagedomain layer
OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva"
OMAP3: voltagedomain data: add wakeup domain
OMAP3+: voltage: add scalable flag to voltagedomain
OMAP2+: powerdomain: add voltagedomain to struct powerdomain
OMAP2: add voltage domains and connect to powerdomains
OMAP3: powerdomain data: add voltage domains
OMAP2+: powerdomain: add voltage domain lookup during register
OMAP2+: voltage: keep track of powerdomains in each voltagedomain
OMAP2+: voltage: split voltage controller (VC) code into dedicated layer
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames
OMAP2+: voltage: enable VC bypass scale method when VC is initialized
OMAP2+: voltage: split out voltage processor (VP) code into new layer
OMAP2+: VC: support PMICs with separate voltage and command registers
OMAP2+: add PRM VP functions for checking/clearing VP TX done status
OMAP3+ VP: replace transaction done check/clear with VP ops
OMAP2+: PRM: add register access functions for VC/VP
OMAP3+: voltage: convert to PRM register access functions
OMAP3+: VC: cleanup i2c slave address configuration
OMAP3+: VC: cleanup PMIC register address configuration
OMAP3+: VC bypass: use fields from VC struct instead of PMIC info
OMAP3+: VC: cleanup voltage setup time configuration
OMAP3+: VC: move on/onlp/ret/off command configuration into common init
OMAP3+: VC: abstract out channel configuration
OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomain
OMAP3+: VC: make I2C config programmable with PMIC-specific settings
OMAP3+: PM: VC: handle mutant channel config for OMAP4 MPU channel
OMAP3+: VC: use last nominal voltage setting to get current_vsel
OMAP3+: VP: cleanup: move VP instance into voltdm, misc. renames
OMAP3+: voltage: remove unneeded debugfs interface
OMAP3+: VP: struct omap_vp_common: replace shift with __ffs(mask)
OMAP3+: VP: move SoC-specific sys clock rate retreival late init
OMAP3+: VP: move timing calculation/config into VP init
OMAP3+: VP: create VP helper function for updating error gain
OMAP3+: VP: remove omap_vp_runtime_data
OMAP3+: VP: move voltage scale function pointer into struct voltagedomain
OMAP3+: VP: update_errorgain(): return error if VP
OMAP3+: VP: remove unused omap_vp_get_curr_volt()
OMAP3+: VP: combine setting init voltage into common function
OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix
OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain
OMAP3+: voltdm: final removal of omap_vdd_info
OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage
OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale
OMAP2+: VC: more registers are per-channel starting with OMAP5
Nishanth Menon (3):
OMAP4: PM: TWL6030: fix uv to voltage for >0x39
OMAP4: PM: TWL6030: address 0V conversions
OMAP4: PM: TWL6030: add cmd register
Patrick Titiano (2):
OMAP4: PM: TWL6030: fix voltage conversion formula
OMAP4: PM: TWL6030: fix ON/RET/OFF voltages
Tero Kristo (1):
omap: voltage: add a stub header file for external/regulator use
Todd Poynor (1):
OMAP: VP: Explicitly mask VPVOLTAGE field
arch/arm/mach-omap2/Makefile | 5 +-
arch/arm/mach-omap2/io.c | 5 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 +-
arch/arm/mach-omap2/omap_twl.c | 107 ++-
arch/arm/mach-omap2/pm.c | 6 +-
arch/arm/mach-omap2/powerdomain.c | 23 +
arch/arm/mach-omap2/powerdomain.h | 10 +
arch/arm/mach-omap2/powerdomain2xxx_3xxx.c | 2 +-
arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c | 2 +
arch/arm/mach-omap2/powerdomains2xxx_data.c | 4 +
arch/arm/mach-omap2/powerdomains3xxx_data.c | 16 +
arch/arm/mach-omap2/powerdomains44xx_data.c | 16 +
arch/arm/mach-omap2/prm2xxx_3xxx.c | 56 ++
arch/arm/mach-omap2/prm2xxx_3xxx.h | 12 +
arch/arm/mach-omap2/prm44xx.c | 71 ++
arch/arm/mach-omap2/prm44xx.h | 12 +
arch/arm/mach-omap2/smartreflex-class3.c | 4 +-
arch/arm/mach-omap2/smartreflex.c | 29 +-
arch/arm/mach-omap2/sr_device.c | 2 +-
arch/arm/mach-omap2/vc.c | 367 ++++++++
arch/arm/mach-omap2/vc.h | 88 ++-
arch/arm/mach-omap2/vc3xxx_data.c | 31 +-
arch/arm/mach-omap2/vc44xx_data.c | 44 +-
arch/arm/mach-omap2/voltage.c | 1088 ++++------------------
arch/arm/mach-omap2/voltage.h | 138 ++--
arch/arm/mach-omap2/voltagedomains2xxx_data.c | 32 +
arch/arm/mach-omap2/voltagedomains3xxx_data.c | 83 +-
arch/arm/mach-omap2/voltagedomains44xx_data.c | 99 ++-
arch/arm/mach-omap2/vp.c | 278 ++++++
arch/arm/mach-omap2/vp.h | 133 ++--
arch/arm/mach-omap2/vp3xxx_data.c | 35 +-
arch/arm/mach-omap2/vp44xx_data.c | 47 +-
arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 -
arch/arm/plat-omap/include/plat/voltage.h | 20 +
34 files changed, 1599 insertions(+), 1271 deletions(-)
create mode 100644 arch/arm/mach-omap2/vc.c
create mode 100644 arch/arm/mach-omap2/voltagedomains2xxx_data.c
create mode 100644 arch/arm/mach-omap2/vp.c
create mode 100644 arch/arm/plat-omap/include/plat/voltage.h
More information about the linux-arm-kernel
mailing list