[PATCH v2] [media] at91: add code to initialize and manage the ISI_MCK for Atmel ISI driver.

[Jean-Christophe PLAGNIOL-VILLARD]

On 23:08 Tue 06 Sep     , Sylwester Nawrocki wrote:
> On 09/06/2011 10:05 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> >> I'm not entirely sure on this one, but as we had a similar situation with
> >> clocks, we decided to extablish the clock hierarchy in the board code, and
> >> only deal with the actual device clocks in the driver itself. I.e., we
> >> moved all clk_set_parent() and setting up the parent clock into the board.
> >> And I do think, this makes more sense, than doing this in the driver, not
> >> all users of this driver will need to manage the parent clock, right?
> >
> > I don't like to manage the clock in the board except if it's manadatory otherwise
> > we manage this at soc level
> > 
> > the driver does not have to manage the clock hierachy or detail implementation
> > but manage the clock enable/disable and speed depending on it's need
> 
> We had a similar problem in the past and we ended up having the boot loader
> setting up the parent clock for the device clock. The driver only controls clock
> gating and sets its clock frequency based on an internal IP version information,
> derived from the SoC revision.
sorry NACK

I do not want to rely on bootloader
when we will have the DT we will pass it via it right now we need find an
other generic way

Best Regards,
J.