[PATCH 1/2] ARM: vic: device tree binding
Rob Herring
robherring2 at gmail.com
Tue Sep 27 09:30:43 EDT 2011
On 09/27/2011 07:16 AM, Jamie Iles wrote:
> This adds a device tree binding for the VIC based on the of_irq_init()
> support.
>
> Cc: Rob Herring <robherring2 at gmail.com>
> Signed-off-by: Jamie Iles <jamie at jamieiles.com>
> ---
> Documentation/devicetree/bindings/arm/vic.txt | 29 ++++++
> arch/arm/common/vic.c | 121 ++++++++++++++++++++-----
> arch/arm/include/asm/hardware/vic.h | 13 +++-
> 3 files changed, 137 insertions(+), 26 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/vic.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/vic.txt b/Documentation/devicetree/bindings/arm/vic.txt
> new file mode 100644
> index 0000000..266716b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/vic.txt
> @@ -0,0 +1,29 @@
> +* ARM Vectored Interrupt Controller
> +
> +One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM
> +system for interrupt routing. For multiple controllers they can either be
> +nested or have the outputs wire-OR'd together.
> +
> +Required properties:
> +
> +- compatible : should be one of
> + "arm,pl190-vic"
> + "arm,pl192-vic"
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : The number of cells to define the interrupts. Must be 1 as
> + the VIC has no configuration options for interrupt sources. The cell is a u32
> + and defines the interrupt number.
> +- reg : The register bank for the VIC.
> +
> +Optional properties:
> +
> +- interrupts : Interrupt source for parent controllers if the VIC is nested.
> +
> +Example:
> +
> + vic0: interrupt-controller at 60000 {
> + compatible = "arm,pl192-vic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0x60000 0x1000>;
> + };
> diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
> index 7aa4262..3658579 100644
> --- a/arch/arm/common/vic.c
> +++ b/arch/arm/common/vic.c
> @@ -22,6 +22,10 @@
> #include <linux/init.h>
> #include <linux/list.h>
> #include <linux/io.h>
> +#include <linux/irqdomain.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> #include <linux/syscore_ops.h>
> #include <linux/device.h>
> #include <linux/amba/bus.h>
> @@ -29,7 +33,6 @@
> #include <asm/mach/irq.h>
> #include <asm/hardware/vic.h>
>
> -#ifdef CONFIG_PM
> /**
> * struct vic_device - VIC PM device
> * @irq: The IRQ number for the base of the VIC.
> @@ -50,13 +53,15 @@ struct vic_device {
> u32 int_enable;
> u32 soft_int;
> u32 protect;
> +#ifdef CONFIG_IRQ_DOMAIN
> + struct irq_domain domain;
> +#endif /* CONFIG_IRQ_DOMAIN */
> };
>
> /* we cannot allocate memory when VICs are initially registered */
> static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
>
> static int vic_id;
> -#endif /* CONFIG_PM */
>
> /**
> * vic_init2 - common initialisation code
> @@ -156,9 +161,10 @@ static int __init vic_pm_init(void)
> return 0;
> }
> late_initcall(vic_pm_init);
> +#endif /* CONFIG_PM */
>
> /**
> - * vic_pm_register - Register a VIC for later power management control
> + * vic_register - Register a VIC.
> * @base: The base address of the VIC.
> * @irq: The base IRQ for the VIC.
> * @resume_sources: bitmask of interrupts allowed for resume sources.
> @@ -166,24 +172,28 @@ late_initcall(vic_pm_init);
> * Register the VIC with the system device tree so that it can be notified
> * of suspend and resume requests and ensure that the correct actions are
> * taken to re-instate the settings on resume.
> + *
> + * We return the VIC so that it can be used for IRQ domain operations for
> + * device tree translation.
> */
> -static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
> +static struct vic_device * __init
> +vic_register(void __iomem *base, unsigned int irq, u32 resume_sources)
> {
> struct vic_device *v;
>
> - if (vic_id >= ARRAY_SIZE(vic_devices))
> + if (vic_id >= ARRAY_SIZE(vic_devices)) {
> printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
> - else {
> - v = &vic_devices[vic_id];
> - v->base = base;
> - v->resume_sources = resume_sources;
> - v->irq = irq;
> - vic_id++;
> + return NULL;
> }
> +
> + v = &vic_devices[vic_id];
> + v->base = base;
> + v->resume_sources = resume_sources;
> + v->irq = irq;
> + vic_id++;
> +
> + return v;
> }
> -#else
> -static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
> -#endif /* CONFIG_PM */
>
> static void vic_ack_irq(struct irq_data *d)
> {
> @@ -331,15 +341,9 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
> vic_set_irq_sources(base, irq_start, vic_sources);
> }
>
> -/**
> - * vic_init - initialise a vectored interrupt controller
> - * @base: iomem base address
> - * @irq_start: starting interrupt number, must be muliple of 32
> - * @vic_sources: bitmask of interrupt sources to allow
> - * @resume_sources: bitmask of interrupt sources to allow for resume
> - */
> -void __init vic_init(void __iomem *base, unsigned int irq_start,
> - u32 vic_sources, u32 resume_sources)
> +static struct vic_device * __init
> +__vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources,
> + u32 resume_sources)
> {
> unsigned int i;
> u32 cellid = 0;
> @@ -357,7 +361,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
> switch(vendor) {
> case AMBA_VENDOR_ST:
> vic_init_st(base, irq_start, vic_sources);
> - return;
> + return NULL;
> default:
> printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
> /* fall through */
> @@ -375,5 +379,72 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
>
> vic_set_irq_sources(base, irq_start, vic_sources);
>
> - vic_pm_register(base, irq_start, resume_sources);
> + return vic_register(base, irq_start, resume_sources);
> }
> +
> +/**
> + * vic_init - initialise a vectored interrupt controller
> + * @base: iomem base address
> + * @irq_start: starting interrupt number, must be muliple of 32
> + * @vic_sources: bitmask of interrupt sources to allow
> + * @resume_sources: bitmask of interrupt sources to allow for resume
> + */
> +void __init vic_init(void __iomem *base, unsigned int irq_start,
> + u32 vic_sources, u32 resume_sources)
> +{
> + __vic_init(base, irq_start, vic_sources, resume_sources);
> +}
> +
> +#ifdef CONFIG_OF
> +static int
> +vic_irq_domain_dt_translate(struct irq_domain *d, struct device_node *np,
> + const u32 *intspec, unsigned int intsize,
> + unsigned long *out_hwirq, unsigned int *out_type)
> +{
> + if (d->of_node != np)
> + return -EINVAL;
> + if (intsize < 1)
> + return -EINVAL;
> +
> + *out_hwirq = intspec[0];
> + *out_type = IRQ_TYPE_NONE;
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops vic_irq_domain_ops = {
> + .dt_translate = vic_irq_domain_dt_translate,
> +};
You should be able to use the simple ops here. You'll need this patch if
you don't already have it:
https://lkml.org/lkml/2011/9/14/189
> +
> +int __init vic_of_init(struct device_node *node, struct device_node *parent)
> +{
> + void __iomem *regs = of_iomap(node, 0);
> + struct vic_device *vic;
> + int irq_base;
> +
> + if (WARN_ON(!regs))
> + return -EIO;
> +
> + irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
> + if (WARN_ON(irq_base < 0))
> + goto out_unmap;
> +
> + vic = __vic_init(regs, irq_base, ~0, ~0);
> + if (WARN_ON(!vic))
> + goto out_unmap;
> +
> + vic->domain.irq_base = irq_base;
> + vic->domain.nr_irq = 32;
> + vic->domain.of_node = of_node_get(node);
> + vic->domain.ops = &vic_irq_domain_ops;
> + irq_domain_add(&vic->domain);
> +
> + return 0;
> +
> +out_unmap:
> + iounmap(regs);
> +
> + return -EIO;
> +}
> +
> +#endif /* CONFIG OF */
> diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
> index 5d72550..df1d895 100644
> --- a/arch/arm/include/asm/hardware/vic.h
> +++ b/arch/arm/include/asm/hardware/vic.h
> @@ -41,7 +41,18 @@
> #define VIC_PL192_VECT_ADDR 0xF00
>
> #ifndef __ASSEMBLY__
> +struct device_node;
> void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
> -#endif
> +
> +#ifdef CONFIG_OF
> +int vic_of_init(struct device_node *node, struct device_node *parent);
> +#else /* CONFIG_OF */
> +static inline int vic_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + return -ENOSYS;
I'm doing ENODEV here for gic. We should be consistent. Which is right?
Rob
More information about the linux-arm-kernel
mailing list