[PATCH v4 2/3] ARM: i.MX5/mm: Remove MX51_DEBUG related mapping
Jason Liu
jason.hui at linaro.org
Fri Sep 9 05:17:48 EDT 2011
MX51_DEBUG related mapping is dead code, no-one use it
Signed-off-by: Jason Liu <jason.hui at linaro.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/mach-mx5/mm.c | 1 -
arch/arm/plat-mxc/include/mach/hardware.h | 1 -
arch/arm/plat-mxc/include/mach/mx51.h | 12 ------------
3 files changed, 0 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index 999f0d3..0002b68 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -36,7 +36,6 @@ static struct map_desc mx50_io_desc[] __initdata = {
*/
static struct map_desc mx51_io_desc[] __initdata = {
imx_map_entry(MX51, IRAM, MT_DEVICE),
- imx_map_entry(MX51, DEBUG, MT_DEVICE),
imx_map_entry(MX51, AIPS1, MT_DEVICE),
imx_map_entry(MX51, SPBA0, MT_DEVICE),
imx_map_entry(MX51, AIPS2, MT_DEVICE),
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a8bfd56..33728aa 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -82,7 +82,6 @@
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx51:
* IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
- * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index dede19a..652f2b0 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -18,18 +18,6 @@
#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
-#define MX51_DEBUG_BASE_ADDR 0x60000000
-#define MX51_DEBUG_SIZE SZ_1M
-
-#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000)
-#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000)
-#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000)
-#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000)
-#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000)
-#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000)
-#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000)
-#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000)
-
/*
* SPBA global module enabled #0
*/
--
1.7.4.1
More information about the linux-arm-kernel
mailing list